|
It was reported that, during a total laparoscopic hysterectomy with bilateral salpingectomy for uterine fibroids, bleeding from the port site was cauterized using a right-angle electrode of the probe plus during wound closure.An electric current ran through the muscle retractor that was placed in the surgical field at that time, causing a second-degree burn.The attending physician's opinion is that it may have been an electrical discharge.The patient is female, but it is currently confirming the treatment she received for this incident, her condition after treatment, and the patient background information.No further information is available.
|
|
(b)(4).Date sent: 8/14/2026.D4 batch #: unknown
d4: udi: as the lot number for the device involved in the event was not provided, the full udi is currently not available.D4: udi: the expiration date is currently not available.Therefore, the full udi is currently not available.Attempts are being made to obtain the following information.To date, no response has been provided.If further details are received at a later date, a supplemental medwatch will be sent:
what were the generator settings for the connected probe plus device?
what is the user¿s experience with the probe plus device?
were there any other functional issues with the dualto or probe plus during the procedure?
what return electrode was used and the location of the electrode?
how was the bleeding from the port site addressed?
at what point during the procedure did the electric current event occurred? what actions were being performed at the time of the burn?
can an image/photo of the muscle retractor that was used in the procedure be shared?
can an image/photo of the patient burn be shared?
how was the patient treated?
what is the patient's current status?
an analysis of the product could not be performed since a physical sample was not received for evaluation.An evaluation of the manufacturing record could not be performed as the required product identification number was not provided to complete the evaluation.As part of our company quality system process, all devices are manufactured, inspected, and distributed to approved specifications.This report is being submitted pursuant to the provisions of 21 cfr, part 803.This report may be based on information which has not been investigated or verified prior to the required reporting date.This report does not reflect a conclusion by ethicon, or its employees that the report constitutes an admission that the product, ethicon, or its employees caused or contributed to the potential event described in this report.If information is obtained that was not available for the initial report, a follow-up report will be filed as appropriate.
|