|
Note: this report pertains to one of two rx needle knife xl used in the same procedure.It was reported to boston scientific corporation that an rx needle knife xl was used in the ampulla during an endoscopic retrograde cholangiopancreatography (ercp) procedure to treat biliary stones performed on (b)(6) 2026.During the procedure, it was reported that the needle knife was bent and having an orientation problem.A second rx needle knife xl was used, and the needle knife was bent and the tip was damage.The procedure was completed with a third rx needle knife xl.There were no patient complications reported as a result of this event and patient's condition at the conclusion of the procedure was reported to be stable.
|
|
Block h6:
imdrf device code a040601 captures the reportable event of cutting wire kinked.Block h11: investigation results
the device was not returned for analysis and was reported to be disposed; therefore, a technical analysis could not be performed.With all the available information, boston scientific concludes that the reported event of wire kinked could not be confirmed.The device was not returned for analysis because it was disposed.Without analysis of the actual device, there is a lack of objective evidence, or descriptive conditions of the event required to determine a probable root cause of the event.A review of the device history record (dhr) was performed.The review of the dhr identified that there were no process related non-conformances, scrap, or rework performed during the production that could explain the event.The reviews ensure each device meets specification prior to release for use.There is no indication the device manufacturing process contributed to the reported complaint.A similar complaint review was completed.There were no emerging trends identified that warrant further action.Based on a thorough review of the reported complaint, boston scientific has assigned an investigation conclusion code of cause not established.
|