MAUDE Adverse Event Report: Mentor Texas MENTOR MemoryGel Breast Implant; Prosthesis, breast, noninflatable, internal, silicone gel-filled

Catalog Number	3503254BC
Medical Device Problem Code	Adverse Event Without Identified Device or Use Problem (2993)
Health Effect - Clinical Code	Capsular Contracture (1761)
Date of Event	02/10/2026
Type of Reportable Event	Serious Injury
Event or Problem Description
It was reported that a female patient underwent breast augmentation primary with mentor memorygel, 325cc silicone prosthesis.Subsequently the patient experienced right sided capsular contracture grade iv postoperatively.The issue was diagnosed through patient symptoms.As a result, the patient underwent unilateral replacement with right: (b)(6) / (b)(6)on (b)(6) 2026.
Additional Manufacturer Narrative
Devices 'image evaluation completed on september 17, 2026: upon visual evaluation of the image provided in the complaint , the gel of the breast implant was observed to be white.As the product involved in this complaint was not received, the device could not be analyzed according to our procedures.Regarding the reported capsular contracture condition, there are not enough details to determine the factors that may have caused this condition.Capsular contracture in the patient¿s breast might be the result of the body¿s individual physiological response to the implantation of a foreign object in soft tissue.Further, capsular contracture is a known complication associated with these devices and is referenced in our current product insert data sheet.Discoloration of the implant as observed in the photo provided is related to the concentration of the triglycerides in the gel fillers and their degree of unsaturation.This finding is consistent with the reported discoloration of breast implant silicone gel in vivo in the scientific literature.As part of mentor's quality process, all devices are manufactured, inspected, and released according to approved specifications.Based on the results of this investigation, it was determined that the product met the manufacturing release criteria: no corrective and preventive action (capa) is required now.Since the device has not been returned for analysis, no product failure analysis can be conducted, and no determination of possible contributing factors can be made.As such, the investigation will be closed.If the complaint device is received in the future, the investigation will be reopened and conducted as appropriate.A manufacturing record evaluation (mre) was performed, and no anomalies were found related to this complaint.In addition, the mre verifies that the device was manufactured in accordance with documented specification and procedures.Reason for device explant and/or reoperation: capsular contracture grade iv.Mentor is submitting this report pursuant to the provisions of 21 cfr, part 803.This report may be based on information which mentor has not been able to investigate or verify prior to the required reporting date.This report does not reflect a conclusion by fda, mentor, or its employees that the report constitutes an admission that the device, mentor, or its employees caused or contributed to the potential event described in this report.If certain information is unknown, not available or does not apply, the section/field of the form is left blank.Manufacturer¿s reference number: (b)(4).

• Brand Name: MENTOR MemoryGel Breast Implant
• Common Device Name: Prosthesis, breast, noninflatable, internal, silicone gel-filled
• Manufacturer (Section D): Mentor Texas; 3041 skyway circle north; irving TX 75038
• Manufacturer (Section G): Mentor Texas; 3041 skyway circle north; irving TX 75038
• Manufacturer Contact: henry boden ; 3041 skyway circle north; irving, TX 75038 ; +1(949)788-2078
• MDR Report Key: 50858105
• Report Number: 1645337-2026-10536
• Device Sequence Number: 15941095
• Product Code: FTR
• UDI-Device Identifier: 00081317000471
• Combination Product (Y/N): N
• Initial Reporter Country: US
• PMA/510(K) Number: P030053
• Number of Events Summarized: 1
• Summary Report (Y/N): N
• Device Implanted Year: 2025
• Device Explanted Year: 2026
• Reporter Type: Manufacturer
• Report Source: Health Professional
• Type of Report: Initial

1 Device was Involved in the Event

1 Patient was Involved in the Event

• Is this an Adverse Event Report?: Yes
• Is this a Product Problem Report?: No
• Operator of Device: Health Professional
• Device Catalogue Number: 3503254BC
• Device Lot Number: 2020468
• Was Device Available for Evaluation?: No
• Is the Reporter a Health Professional?: No
• Initial Date Received by Manufacturer: 09/09/2026
• Initial Report FDA Received Date: 09/22/2026
• Was Device Evaluated by Manufacturer? (Y/N): No
• Date Device Manufactured: 12/16/2024
• Is the Device Labeled for Single Use? (Y/N): Yes
• Is This a Single-Use Device that was Reprocessed and Reused on a Patient? (Y/N): No
• Usage of Device: Initial
• Patient Sequence Number: 1
• Outcome Attributed to Adverse Event: Required Intervention
• Patient Age: 54 YR
• Patient Sex: Female
• Patient Race: White