• Decrease font size
  • Return font size to normal
  • Increase font size
U.S. Department of Health and Human Services

MAUDE Adverse Event Report: Maquet Critical Care AB Servo-s Base Unit; Ventilator, Continuous, Facility Use

  • Print
  • Share
  • E-mail
-
Super Search Devices@FDA
510(k) | DeNovo | Registration & Listing | Adverse Events | Recalls | PMA | HDE | Classification | Standards
CFR Title 21 | Radiation-Emitting Products | X-Ray Assembler | Medsun Reports | CLIA | TPLC
 

Maquet Critical Care AB Servo-s Base Unit; Ventilator, Continuous, Facility Use Back to Search Results
Model Number 6640440
Medical Device Problem Code Failure of Device to Self-Test (2937)
Health Effect - Clinical Code No Clinical Signs, Symptoms or Conditions (4582)
Date of Event 09/02/2026
Type of Reportable Event Malfunction
Event or Problem Description
It was reported that the ventilator failed pressure transducer test during pre-use check.There was no patient involvement.Manufacturer's ref.#: (b)(4).
 
Additional Manufacturer Narrative
A third party field service engineer (fse) has investigated the reported ventilator on-site.The fse replaced the pressure transducer printed circuit board (pcb) to resolve the issue.After the replacement, the ventilator passed all functional and safety tests and was cleared for clinical use.The device's logs were not provided for further analysis.Pressure transducer pcb measures the pressure, conveyed via the pressure tube connected to this block by its differential pressure transducer.With differential reference to the ambient pressure, the output signal is proportional to the measured pressure thus giving a linear measurement in the range -40 cmh2o to +160 cmh2o.A defective pressure transducer may lead to inaccuracy in pressure measurement.Appearance of this failure will be noticed by the user by generated high priority alarms.If present, the fault will be detected during pre-use check.The cause of the reported issue in this customer product complaint has been determined.The issue was related to pressure transducer pcb.No further investigation can be done as the defective pcb will not be returned for investigation.Event site state: 22 event site postal code: 600101.
 
Search Alerts/Recalls

  New Search  |  Submit an Adverse Event Report

Brand Name
Servo-s Base Unit
Common Device Name
Ventilator, Continuous, Facility Use
Manufacturer (Section D)
Maquet Critical Care AB
roentgenvagen 2
solna
Manufacturer (Section G)
Maquet Critical Care AB
roentgenvagen 2
solna
Manufacturer Contact
caroline kabbabe
roentgenvagen 2
solna 
MDR Report Key50880938
Report Number8010042-2026-0001309
Device Sequence Number13202099
Product Code CBK
UDI-Device Identifier07325710001127
UDI-Public(01)07325710001127(11)200423
Combination Product (Y/N)N
Initial Reporter CountryIN
PMA/510(K) Number
K123149
Number of Events Summarized1
Summary Report (Y/N)N
Serviced by Third Party (Y/N)Y
Reporter Type Manufacturer
Report Source Foreign,Health Professional,Distributor
Initial Reporter Occupation Other Health Care Professional
Type of Report Initial
Report Date (Section B) 09/24/2026
1 Device was Involved in the Event
1 Patient was Involved in the Event
Is this an Adverse Event Report? No
Is this a Product Problem Report? Yes
Operator of Device Health Professional
Device Model Number6640440
Device Lot NumberN/A
Was Device Available for Evaluation? No
Is the Reporter a Health Professional? Yes
Type of Report(Section G)Thirty-Day
Initial Date Received by Manufacturer 09/02/2026
Initial Report FDA Received Date09/24/2026
Was Device Evaluated by Manufacturer? (Y/N) No
Date Device Manufactured04/23/2020
Is the Device Labeled for Single Use? (Y/N) No
Usage of Device Reuse
Patient Sequence Number1
Patient SexUnknown
-
-