As a result of a recent fda inspection, we are retrospectively reviewing complaints and associated documents for compliance to the regulations from 2015 to date.We have strengthened our mdr reporting criteria and we are reporting the attached medical device report in accordance with our new criteria.As a result of this retrospective review, this mdr is being reported immediately upon discovery.It was reported that the system trackball appears to freeze when performing a transesophageal echocardiography (tee) exam with the z6ms transducer.The color box and cursor will not move either.The transducer was disconnected and then reconnected and the cursor was able to move.No error messages were displayed.There was no need to repeat the procedure as no images were lost.There is no patient injury reported.No additional information was provided.
|
Original submission narrative: this issue is under investigation.A follow-up report will be submitted when the investigation results are available.Follow-up narrative: this supplemental report is being submitted to update the device available for evaluation , update the follow-up type , update the device evaluated by manufacturer , update the event problem and evaluation codes , and provide the investigation results.Background: - prior to 4.0c, when tee probes reached 40 deg c, a popup message was displayed to inform the user the transducer temperature was rising.- on z6ms probes, the customer complained that this message was undesirable and confusing as it was assumed to be a warning message and not just informational.It was requested to be removed.Root cause: - in the 4.0c release, when the popup message was removed, the software changes did not cover one behavior interaction with the mouse cursor.- in previous versions of the software, when the popup message was displayed, it contained an "ok" button for the user to dismiss the message.To enable the user to interact with the "ok" button, the software provided the user with a mouse pointer.This was fixed with the release of vb10d (4.0d), which corrects the issue via update program us014/16/s.Note: the original emdr was submitted to the non-production environment.This report is to submit to the production environment.All original files are attached.This emdr contains both the initial and fu#1.
|