| Model Number |
A3203 |
| Medical Device Problem Code |
Difficult to Open or Close (2921)
|
| Health Effect - Clinical Code |
No Known Impact Or Consequence To Patient (2692)
|
|
Type of Reportable Event
|
Malfunction
|
|
Additional Manufacturer Narrative
|
|
Ra has received the incident device and has been assigned to engineering for evaluation.A follow-up report will be sent upon completion of investigation.
|
| |
|
Event or Problem Description
|
|
Procedure performed: unknown - the doctor mentioned to the instrument specialist that when the insert is attached to the jaw it is difficult for the clamp to maintain clapped in the locked position.The doctor used the a0c02 inserts.Applied medical received additional information on march 14,2017 from the customer via phone: the customer has confirmed that when the jaw is clamped closed it would easily unclasp.If the handle were to be tapped the clamp would release.Prevac steam was used to sterilization (b)(4).Type of intervention: unk.Patient status: the caller was not informed of any patient injury.
|
| |
|
Additional Manufacturer Narrative
|
|
Investigation summary: the event unit was returned to applied medical for evaluation.Testing confirmed the locking mechanism was functional.Upon further investigation, it was observed that the clamp was able to disengage if sufficient force was applied to the handle.However, the locking mechanism did not disengage completely.It is likely that ratchet teeth were worn due to normal use over time, which would cause reduced engagement of the locking mechanism.It is likely the event unit had been used multiple times prior to the complainant's experience.Applied medical will continue to monitor its vigilance system for trends and take appropriate actions, as necessary, to ensure the performance and safety of its products.
|
| |
|
Search Alerts/Recalls
|