MAUDE Adverse Event Report: EDWARDS LIFESCIENCES, PR SWAN-GANZ BIPOLAR PACING CATHETER FOR SVC INSERTION

Model Number PE074F5

Device Problem Pacing Problem (1439)

Patient Problem No Consequences Or Impact To Patient (2199)

Event Date 09/20/2017

Event Type  malfunction  

Manufacturer Narrative

One bipolar pacing catheter with attached monoject 1.3 cc limited volume syringe at gate valve was returned for evaluation.No visible damage or abnormality to the catheter body, balloon, windings or returned syringe was observed.Continuity testing was performed on the distal and proximal circuits and there were no open, intermittent, or short conditions observed.The balloon inflated clear and concentric with 1.3 cc air and the balloon remained inflated for 5 minutes without leakage.Balloon inflation testing was performed using returned syringe with 1.3 cc air by holding the balloon under water.Visual examinations were performed under microscope at 20x magnification and with the unaided eyes.A device history record review was completed and documented that device met all specifications upon distribution.Customer report of pacing issue could not be confirmed during the analysis, as the device responded appropriately during functional testing.There was no evidence of a manufacturing nonconformance.No further actions will be taken at this time.Swan-ganz pacing thermodilution (td) catheters serve as diagnostic and therapeutic tools in the management of critically ill patients.There are multiple failure modes that may require the exchange of a pacing catheter.Since proper functioning of the pacing catheter depends on the electrical continuity of its electrodes and internal wires, care should be exercised when handling the catheter.Stretching, kinking, or forceful wiping of the catheter may result in damage.After stable pacing has been confirmed, the proximal end of the catheter should be secured to the insertion site to prevent undue movement that could result in tip dislodgment and loss of capture, or catheter migration.Care should be taken not to kink the catheter body when securing it.In this complaint, it could not be determined if procedural factors or device handling may have contributed to the reported event.Complaint histories for all reported events are reviewed against trending control limits on a monthly basis, and any excursions above the control limits are assessed and documented as part of this monthly review.(b)(4).

Event Description

It was reported that the catheter became unable to pace during use in the medical ward.The catheter was replaced and the problem was solved.No further information could be obtained.Patient demographic information requested but unavailable.There were no patient complications reported.

• Brand Name: SWAN-GANZ BIPOLAR PACING CATHETER FOR SVC INSERTION
• Type of Device: PACING CATHETER
• Manufacturer (Section D): EDWARDS LIFESCIENCES, PR; state rd indus pk 402 km 1.4; anasco PR 00610
• Manufacturer (Section G): EDWARDS LIFESCIENCES, PR; state rd indus pk 402 km 1.4; anasco PR 00610
• Manufacturer Contact: lynn selawski ; 1 edwards way; irvine, CA 92614 ; 9497564386
• MDR Report Key: 6945704
• MDR Text Key: 90309396
• Report Number: 2015691-2017-03350
• Device Sequence Number: 1
• Product Code: LDF
• Combination Product (y/n): N
• Reporter Country Code: JA
• PMA/PMN Number: K813521
• Number of Events Reported: 1
• Summary Report (Y/N): N
• Report Source: Manufacturer
• Source Type: company representative,distri
• Reporter Occupation: Other
• Type of Report: Initial
• Report Date: 09/20/2017

1 Device was Involved in the Event

1 Patient was Involved in the Event

• Date FDA Received: 10/12/2017
• Is this an Adverse Event Report?: No
• Is this a Product Problem Report?: Yes
• Device Operator: Health Professional
• Device Expiration Date: 05/09/2019
• Device Model Number: PE074F5
• Device Lot Number: 60864615
• Was Device Available for Evaluation?: Device Returned to Manufacturer
• Date Returned to Manufacturer: 10/07/2017
• Date Manufacturer Received: 09/20/2017
• Was Device Evaluated by Manufacturer?: Device Not Returned to Manufacturer
• Date Device Manufactured: 05/15/2017
• Is the Device Single Use?: Yes
• Is This a Reprocessed and Reused Single-Use Device?: No
• Type of Device Usage: Initial
• Patient Sequence Number: 1