• Decrease font size
  • Return font size to normal
  • Increase font size
U.S. Department of Health and Human Services

MAUDE Adverse Event Report: ABBOTT MEDICAL OPTICS SILVER; SURGICAL ADJUNCTS

  • Print
  • Share
  • E-mail
-
Super Search Devices@FDA
510(k) | DeNovo | Registration & Listing | Adverse Events | Recalls | PMA | HDE | Classification | Standards
CFR Title 21 | Radiation-Emitting Products | X-Ray Assembler | Medsun Reports | CLIA | TPLC
 

ABBOTT MEDICAL OPTICS SILVER; SURGICAL ADJUNCTS Back to Search Results
Model Number PSCST30
Device Problem Material Frayed (1262)
Patient Problem No Patient Involvement (2645)
Event Date 10/03/2017
Event Type  malfunction  
Manufacturer Narrative
This is not an implantable device.All pertinent information available to abbott medical optics has been submitted.
 
Event Description
It was reported that three cartridges (model pscst30) were not without defects.The ends of the cartridges seemed to be frayed.Reportedly, the tech noticed the defect and used another cartridge from the same lot with no issues.No patient involvement or contact.No delay in surgery.No further information was provided.Three (3) mdrs will be submitted.This report is 2 of 3.
 
Manufacturer Narrative
Device available for evaluation, returned to manufacturer on: 11/30/2017.Device evaluation: the three cartridges were returned at the manufacturing site for evaluation.Visual inspection showed: cartridge #1 had no viscoelastic residue, the wings were observed open.The hinge of the wings was observed as if it was handled.Cartridge #2 had viscoelastic residue near the cartridge tip.Cartridge #3 had viscoelastic residue near the cartridge tip and in the wings.The three cartridge tips were observed with a dent.The customer's reported complaint was verified in the three samples received; however, due the condition of the lens received it could not be related to the manufacturing process since the samples were handled.Manufacturing records review: the manufacturing records for the cartridge were reviewed.During manufacturing the operators check the neck, tube and tip areas for cracks.No cracks or stress marks are allowed.They also check the tip for any melting, roughness, dent, bent tip or smash condition.The product was manufactured and released according to specification.A search revealed that no additional complaints for this order number have been received.Labeling review: the directions for use (dfu) were reviewed.The directions for use (dfu) adequately provides instructions and precautions along with warnings for the proper use and handling of the device.As a result of the investigation, there is no indication of a product quality deficiency and the reported issue was verified.All pertinent information available to abbott medical optics has been submitted.
 
Search Alerts/Recalls

  New Search  |  Submit an Adverse Event Report

Brand Name
SILVER
Type of Device
SURGICAL ADJUNCTS
Manufacturer (Section D)
ABBOTT MEDICAL OPTICS
santa ana CA
Manufacturer (Section G)
ABBOTT MEDICAL OPTICS INC.
road 402 north, km 4.2
anasco industrial park, pob 14
anasco PR 00610
Manufacturer Contact
pam mcclain
1700 east st. andrew place
santa ana, CA 92705
7142478243
MDR Report Key6986118
MDR Text Key91097895
Report Number2648035-2017-01979
Device Sequence Number1
Product Code KYB
UDI-Device Identifier05050474530034
UDI-Public(01)05050474530034(17)180601(10)CC06697
Combination Product (y/n)N
Reporter Country CodeUS
PMA/PMN Number
K961242
Number of Events Reported1
Summary Report (Y/N)N
Report Source Manufacturer
Source Type company representative,health
Reporter Occupation Other
Type of Report Initial,Followup
Report Date 01/19/2018
1 Device was Involved in the Event
1 Patient was Involved in the Event
Date FDA Received10/28/2017
Is this an Adverse Event Report? No
Is this a Product Problem Report? Yes
Device Operator Physician
Device Expiration Date06/01/2018
Device Model NumberPSCST30
Device Catalogue NumberPSCST30
Device Lot NumberCC06697
Was Device Available for Evaluation? Device Returned to Manufacturer
Date Returned to Manufacturer11/30/2017
Is the Reporter a Health Professional? No
Date Manufacturer Received12/27/2017
Was Device Evaluated by Manufacturer? Yes
Date Device Manufactured06/01/2017
Is the Device Single Use? Yes
Is This a Reprocessed and Reused Single-Use Device? No
Type of Device Usage Initial
Patient Sequence Number1
-
-