Catalog Number 1125300-38 |
Device Problems
Difficult to Remove (1528); Failure to Advance (2524); Device Dislodged or Dislocated (2923); Material Deformation (2976)
|
Patient Problem
No Consequences Or Impact To Patient (2199)
|
Event Date 12/05/2017 |
Event Type
malfunction
|
Manufacturer Narrative
|
(b)(4).During processing of this complaint, attempts were made to obtain complete event, patient and device information.Concomitant medical products:v guide wire: sion blue, sion; guide catheter: hyperion 7fr spb3.75.The device is expected to be returned for evaluation.It has not yet been received.A follow up report will be submitted with all additional relevant information.
|
|
Event Description
|
It was reported that the procedure was to treat a mildly tortuous, mildly calcified de novo lesion in the mid to proximal left anterior descending coronary artery that was 90% stenosed.Pre-dilatation was performed with a non-abbott balloon dilatation catheter.A 3.0 x 38 xience alpine stent delivery system (sds) was advanced to the lesion with resistance met but failed to cross due to the anatomy.When the sds was pulled back into the guiding catheter for removal, it got caught in the kink of the guiding catheter.The stent was removed as a single unit altogether with the guiding catheter.Once outside of the patients anatomy, it was noted that the stent dislodged from the balloon.The stent was found inside the guiding catheter and noted as crushed.Another sds was used to successfully complete the procedure.There was no clinically significant delay in the procedure and no adverse patient effects.No additional information was provided.
|
|
Manufacturer Narrative
|
(b)(4).A visual inspection was performed on the returned device.The reported stent dislodgement and stent damage (crushed) were both able to be confirmed.The reported failure to advance could not be replicated in a testing environment as it was based on circumstances of the procedure.The reported difficult to remove from the guiding catheter could not be tested as the stent delivery system (sds) was not returned.A review of the lot history record identified no manufacturing nonconformities issued to the reported lot that would have contributed to this event.Additionally, a review of the complaint history did not indicate a lot specific quality issue.The investigation determined the reported difficulties appear to be related to circumstances of the procedure.Additionally, during the removal of the device the sds interacted with the kinked guiding catheter resulting in the reported difficulty to remove and subsequent stent dislodgement and material deformation (crushed stent).There is no indication of a product quality issue with respect to manufacture, design or labeling.
|
|
Search Alerts/Recalls
|