• Decrease font size
  • Return font size to normal
  • Increase font size
U.S. Department of Health and Human Services

MAUDE Adverse Event Report: HOYA SURGICAL OPTICS, INC. HOYA ISERT 250; INTRAOCULAR LENS

  • Print
  • Share
  • E-mail
-
Super Search Devices@FDA
510(k) | DeNovo | Registration & Listing | Adverse Events | Recalls | PMA | HDE | Classification | Standards
CFR Title 21 | Radiation-Emitting Products | X-Ray Assembler | Medsun Reports | CLIA | TPLC
 

HOYA SURGICAL OPTICS, INC. HOYA ISERT 250; INTRAOCULAR LENS Back to Search Results
Model Number ISERT 250 (+22.00 OD)
Device Problem Insufficient Information (3190)
Patient Problems Eye Injury (1845); Clouding, Central Corneal (2228)
Event Date 10/06/2017
Event Type  Injury  
Manufacturer Narrative
Investigation results: based on extensive experiments, it was concluded that the most likely cause of the observed haptic breakage is a combination of moving the slider fast forward while applying upward force to the slider.This movement may cause the lens-downholder to deform, and if this happens an edge of the lens-downholder intended to guide the plunger applies unintended shear force on the trailing haptic.This unintended shear force may damage the haptic when it is pushed in its folded position, which can result into breakage of the trailing haptic.
 
Event Description
The surgeon removed a fragment of haptic from the iol implant from the anterior chamber.Patient had cataract surgery on (b)(6) 2017, no problems noted at the time but on review appointment apparent that the cornea was oedematous.Subsequently referred to dr.For opinion and apparent that there was a blue end of the haptic of the lens implant in the front chamber of the eye.There have been other occurrences of the back haptic tearing off while being injected, but was obviously damaged at the time but not apparent, and it has subsequently become completely detached and loose in the anterior chamber, damaging the endothelial cells and causing the cornea to become cloudy.Patient information- patient outcome remains unknown, however action taken by the healthcare facility to the care of the patient: removing the fragment to prevent further damage was the first step.The cornea has cleared somewhat since.Time will tell whether the cornea will clear fully, or if the patient will require an endothelial corneal transplant.
 
Search Alerts/Recalls

  New Search  |  Submit an Adverse Event Report

Brand Name
HOYA ISERT 250
Type of Device
INTRAOCULAR LENS
Manufacturer (Section D)
HOYA SURGICAL OPTICS, INC.
15335 fairfield ranch road
suite 250
chino hills CA 91709
Manufacturer (Section G)
HOYA CORPORATION MEDICAL DIVISION
2-7-5 naka-ochiai, shinjuku-ku
tokyo, 161-8 525
JA   161-8525
Manufacturer Contact
kees den besten
15335 fairfield ranch road
suite 250
chino hills, CA 91709
9096803900
MDR Report Key7183354
MDR Text Key97051612
Report Number3006723646-2018-00001
Device Sequence Number1
Product Code HQL
UDI-Device Identifier04547480480824
UDI-Public04547480480824
Combination Product (y/n)N
Reporter Country CodeUK
PMA/PMN Number
P080004
Number of Events Reported1
Summary Report (Y/N)N
Report Source Manufacturer
Source Type foreign,health professional
Reporter Occupation Physician
Type of Report Initial
Report Date 01/11/2018
1 Device was Involved in the Event
1 Patient was Involved in the Event
Is this an Adverse Event Report? Yes
Is this a Product Problem Report? Yes
Device Operator Health Professional
Device Expiration Date01/31/2020
Device Model NumberISERT 250 (+22.00 OD)
Device Lot NumberN/A
Was Device Available for Evaluation? Yes
Is the Reporter a Health Professional? Yes
Was the Report Sent to FDA? No
Initial Date Manufacturer Received 11/16/2017
Initial Date FDA Received01/11/2018
Was Device Evaluated by Manufacturer? Yes
Date Device Manufactured01/31/2017
Is the Device Single Use? Yes
Is This a Reprocessed and Reused Single-Use Device? No
Type of Device Usage Initial
Patient Sequence Number1
Patient Outcome(s) Other;
-
-