MAUDE Adverse Event Report: BARD PERIPHERAL VASCULAR, INC. FLUENCY PLUS ENDOVASCULAR STENT GRAFT

Model Number	FEM12120
Medical Device Problem Codes	Misfire (2532); Material Deformation (2976)
Health Effect - Clinical Code	No Consequences Or Impact To Patient (2199)
Date of Event	09/13/2018
Type of Reportable Event	Malfunction
Additional Manufacturer Narrative
As the lot number for the device was not provided, a manufacturing review could not be performed.The sample was not returned to the manufacturer for inspection/evaluation.Therefore, the investigation of the reported event is inconclusive.Based upon the available information, the definitive root cause for this event is unknown.The instructions for use (ifu) is adequate for the reported device/patient code(s) and provides general instructions for use, as well as warnings, precautions and potential complications associated with the device.Upon receipt of new or additional information, a follow-up report will be submitted as applicable.
Event or Problem Description
It was reported that during a stent graft placement procedure for treatment in the basilic vein, the stent graft allegedly partially deployed.It was further reported that excessive force was used to deploy the stent graft.The stent graft delivery system was removed without difficulty.Reportedly, another device was used to complete the procedure.There was no reported patient injury.
Additional Manufacturer Narrative
H10: manufacturing review: based on the information available and the investigation performed, there is no indication that the product failed to meet its specification prior to shipment.The lot records have been reviewed with special attention to the manufacturing and inspection of this product and the product was found to have met the specification prior to shipment.The review shows that no remarkable incidents occurred during the manufacturing process.No relevant manufacturing process changes were implemented that could have led to the event reported.No additional complaint has been reported for this lot number previously.Investigation summary: a stent graft delivery system was returned.Based on the evaluation of the sample the reported partial deployment could be confirmed.The stent graft was found partially deployed and the condition of the delivery system, in particular the elongated outer sheath indicated that increased deployment forces occurred during the attempt to deploy the stent graft.A manufacturing related issue could not be identified.Based on the information available and the evaluation of the sample returned, a definite root cause for the reported event could not be determined.Labeling review: in reviewing the valid labeling for this product it was found that the instructions for use (ifu) sufficiently address the potential risks.Regarding preparation of the device the ifu states: "prior to loading the endovascular system over a guide wire, both ports must be flushed with sterile saline.Flushing these lumens will also facilitate stent graft deployment." regarding the anatomy of the placement site the ifu states: "the safety and effectiveness of the device when placed across a tight bend has not been evaluated.Prior to stent graft deployment, ensure that the proximal (inflow) stent graft end is positioned in a straight section of the lumen to reduce the risk of higher deployment forces and possible endovascular system failure".Furthermore, the ifu states: "if unusual resistance or high deployment force is encountered during stent graft deployment, abort the procedure, remove the delivery system and use an alternative device.".
Event or Problem Description
It was reported that during a stent graft placement procedure for treatment in the basilic vein, the stent graft allegedly partially deployed.It was further reported that excessive force was used during deployment attempt.The stent graft delivery system was removed without difficulty.Reportedly, another device was used to complete the procedure.There was no reported patient injury.

• Brand Name: FLUENCY PLUS ENDOVASCULAR STENT GRAFT
• Common Device Name: ENDOVASCULAR STENT GRAFT
• Manufacturer (Section D): BARD PERIPHERAL VASCULAR, INC.; 1625 w 3rd st.; tempe AZ 85281
• MDR Report Key: 7953587
• Report Number: 2020394-2018-01891
• Device Sequence Number: 427884
• Product Code: PFV
• UDI-Device Identifier: 04049519008677
• UDI-Public: (01)04049519008677
• Combination Product (Y/N): N
• Initial Reporter State: TN
• Initial Reporter Country: US
• PMA/510(K) Number: P130029
• Number of Events Summarized: 1
• Summary Report (Y/N): N
• Reporter Type: Manufacturer
• Report Source: company representative
• Initial Reporter Occupation: Non-Healthcare Professional
• Type of Report: Initial,Followup
• Report Date (Section B): 12/03/2018

1 Device was Involved in the Event

1 Patient was Involved in the Event

• Is this an Adverse Event Report?: No
• Is this a Product Problem Report?: Yes
• Operator of Device: Health Professional
• Device Model Number: FEM12120
• Device Catalogue Number: FEM12120
• Device Lot Number: ANBW0124
• Was Device Available for Evaluation?: Device Returned to Manufacturer
• Date Returned to Manufacturer: 10/16/2018
• Initial Date Received by Manufacturer: 09/17/2018
• Supplement Date Received by Manufacturer: 11/20/2018
• Initial Report FDA Received Date: 10/10/2018
• Supplement Report FDA Received Date: 12/03/2018
• Is This a Single-Use Device that was Reprocessed and Reused on a Patient? (Y/N): No
• Patient Sequence Number: 1
• Patient Weight: 84