MAUDE Adverse Event Report: WRIGHTS LANE SYNTHES USA PRODUCTS LLC 3.5MM LCP RECONSTRUCTION PLATE 8 HOLES/112MM; APPLIANCE,FIXATION,NAIL

Model Number	245.081
Medical Device Problem Code	Adverse Event Without Identified Device or Use Problem (2993)
Health Effect - Clinical Code	No Code Available (3191)
Type of Reportable Event	Serious Injury
Additional Manufacturer Narrative
Device is not expected to be returned for manufacturer review/investigation.(b)(4).Device evaluation/investigation could not be completed; no conclusion could be drawn as product was not returned to manufacturer.Additionally, device history records review has been requested.Device was used for treatment, not diagnosis.If information is obtained that was not available for the initial medwatch, a follow-up medwatch will be filed as appropriate.
Event or Problem Description
It was reported that on (b)(6) 2018 a patient underwent a revision surgery of the right scapula for failed fixation and loss of anatomic reduction, due to patient compliance.There was no report of malfunction with any of the devices.A locking compression plate 6 holes, lcp reconstruction plate 8 holes, two (2) 3.5mm unknown locking screws, nine (9) 3.5mm unknown cortex screws and one (1) 2.7mm unknown cortex screw were removed.Bone loss required fibular strut allograft placement and infuse bone morphogenetic proteins (bmp).During revision, patient was implanted with new fixation.Original implant date is unknown, less than one year prior to the revision surgery.The plates were intentionally bent or contoured during initial implantation.Surgical delay is unknown.Procedure was successfully completed, and patient outcome was as planned.This report is for one (1) locking compression plate, 8 holes.This is report 2 of 5 for (b)(4).
Event or Problem Description
It was further reported that during revision, patient was implanted with following fixation: a lcp superior clavicle plates, a variable angle lcp lateral anterior clavicle plates, two (2) 2.7 mm locking screws 8mm, a 2.7 mm locking screws 10mm, two (2) 2.7 mm locking screws 12mm, 2.7 mm variable locking screws 10mm, 2.7 mm variable locking screws 22mm, 3.5 mm locking screws 16mm, two (2) 3.5 mm locking screws 18mm, 3.5 mm locking screws 22mm, 3.5mm cortex screws 18mm, and 3.5mm cortex screws 28mm.
Additional Manufacturer Narrative
If the information is unknown, not available or does not apply, the section/field of the form is left blank.Device was used for treatment, not diagnosis.If information is obtained that was not available for the initial medwatch, a follow-up medwatch will be filed as appropriate.
Additional Manufacturer Narrative
Depuy synthes is submitting this report pursuant to the provisions of 21 cfr, part 803.This report may be based on information which depuy synthes has not been able to investigate or verify prior to the required reporting date.This report does not reflect a conclusion by fda, depuy synthes or its employees that the report constitutes an admission that the device, depuy synthes, or its employees caused or contributed to the potential event described in this report.Dhr review was attempted.Part/lot combination are unknown at synthes gmbh, no dhr review possible.Customer quality conducted a review of the provided medical images.No product was returned; the investigation was performed based upon a review of the received medical images.Upon review of the medical images, the complaint condition is unable to be confirmed.The image shows the intact plate with slight contouring on both sides of hole 4 from the left end of the plate.The cause for the complaint condition is not able to be determined.Based on the information available, it has been determined that no corrective and preventative action is proposed.This complaint will be accounted for and monitored via post market surveillance activities.If additional information is made available, the investigation will be updated as applicable.Device was used for treatment, not diagnosis.If information is obtained that was not available for the initial medwatch, a follow-up medwatch will be filed as appropriate.

• Brand Name: 3.5MM LCP RECONSTRUCTION PLATE 8 HOLES/112MM
• Common Device Name: APPLIANCE,FIXATION,NAIL
• Manufacturer (Section D): WRIGHTS LANE SYNTHES USA PRODUCTS LLC; 1302 wrights lane east; west chester PA 19380
• MDR Report Key: 7964865
• Report Number: 2939274-2018-54364
• Device Sequence Number: 19190847
• Product Code: KTT
• UDI-Device Identifier: 10886982169624
• UDI-Public: (01)10886982169624
• Combination Product (Y/N): N
• Initial Reporter State: UT
• Initial Reporter Country: US
• PMA/510(K) Number: K000684
• Number of Events Summarized: 1
• Summary Report (Y/N): N
• Device Explanted Year: 2018
• Reporter Type: Manufacturer
• Report Source: company representative,health
• Initial Reporter Occupation: Other Health Care Professional
• Type of Report: Initial,Followup,Followup
• Report Date (Section B): 09/28/2018

1 Device was Involved in the Event

1 Patient was Involved in the Event

• Is this an Adverse Event Report?: Yes
• Is this a Product Problem Report?: No
• Operator of Device: Health Professional
• Device Model Number: 245.081
• Device Catalogue Number: 245.081
• Device Lot Number: 36806
• Was Device Available for Evaluation?: No
• Initial Date Received by Manufacturer: 09/28/2018
• Supplement Date Received by Manufacturer: 10/15/2018; 11/16/2018
• Initial Report FDA Received Date: 10/15/2018
• Supplement Report FDA Received Date: 10/16/2018; 11/19/2018
• Patient Sequence Number: 1
• Outcome Attributed to Adverse Event: Required Intervention
• Patient Age: 63 YR