Catalog Number 7209335 |
Device Problem
Break (1069)
|
Patient Problem
No Known Impact Or Consequence To Patient (2692)
|
Event Date 12/07/2018 |
Event Type
malfunction
|
Manufacturer Narrative
|
(b)(6).
|
|
Event Description
|
It was reported that a portion of metal tip of burr broke off into patient shoulder.All pieces retrieved.No apparent harm to the patient.
|
|
Manufacturer Narrative
|
Additional information visual inspection and functional testing could not be performed because the device in question has not been returned for evaluation.Thus, the complaint could not be verified and a root cause could not be determined with confidence.It is difficult to perform an accurate evaluation of a failure without having the failed product.As such the complaint is being closed without conclusion.However, if the product is returned in the future the complaint can be reopened and evaluated.Event description correction.Not a health professional leave it without any value company representative and no health professional usage of device, initial use.
|
|
Event Description
|
It was reported that during a shoulder arthroscopy, a portion of metal tip of burr broke off into patient shoulder.All pieces retrieved.No apparent harm to the patient.It is unknown if there was back-up device available and if there was a delay in the case.Attempts were made to retrieve further information but no response was received from the complainant.
|
|
Manufacturer Narrative
|
One 4.5mm slap burr was returned for evaluation.Visual assessment of the device confirmed the hooded portion of the outer sheath has broken off at the weldment and was not returned.Functional inspection was performed and the inner burr did not rotate freely within the outer blade, friction was felt in the unloaded condition.The condition of the device indicates it was subjected to excessive side loading during use.Per the devices instructions for use ¿excessive ¿side-loading¿ on the blade during use does not improve cutting performance and in extreme cases may result in wear and degradation of the inner assembly¿.
|
|
Event Description
|
It was reported that during a shoulder arthroscopy, a portion of metal tip of burr broke off into patient shoulder.All pieces retrieved.No apparent harm to the patient.It is unknown if there was back-up device available and if there was a delay in the case.Attempts were made to retrieve further information but no response was received from the complainant.
|
|
Search Alerts/Recalls
|