|
The user facility reported to terumo cardiovascular that prior to cardiopulmonary bypass, during prime, there was an abnormal sound that came from the centrifugal pump.No patient involvement.Product was changed out.It is unknown if the procedure was completed successfully.
|
|
This follow-up report is submitted to fda in accord with applicable regulations ¿ and as indicated by terumo cardiovascular systems in the initial report submitted to the fda on february 14, 2019.Upon further investigation of the reported event, the following information is new and/or changed: b5 (updated describe event or problem).D4 (additional device information - added exp date).D10 (device availability - added date returned to manufacturer).G4 (date received by manufacturer).G7 (indication that this is a follow-up report).H2 (follow-up due to additional information and device evaluation).H3 (device evaluated by manufacturer).H6 (identification of evaluation codes b5,10, 11, 3331, 180, 22).Method code #1: 10 - testing of actual/suspected device.Method code #2: 11 - testing of device from same lot/batch retained by manufacturer.Method code #3: 3331 - analysis of production records.Results code: 180 - mechanical problem identified.Conclusions code: 22 - known inherent risk of device.Visual inspection was performed on the sample upon receipt, during which no anomalies were noted anywhere on the device.The sample was built into a saline circuit and then set up on a sarns drive motor.The rpm were set at 900 and ramped up by 300 rpm every ten minutes for one hour for a maximum of 2400 rpm.During each interval, the returned sample was observed for any running sound anomalies.The test confirmed the abnormal sound at 900rpm.A retention sample from the affected product code/lot number was obtained and tested the same way, no sound anomalies noted either.The issue experienced by the customer was confirmed and is likely due to an abnormal interaction between the seal rotor and stator surfaces.All available information has been placed on file in quality management for appropriate tracking, trending, and follow-up.
|