MAUDE Adverse Event Report: C.R. BARD, INC. (COVINGTON) -1018233 BARDEX® LUBRI-SIL® ALL-SILICONE FOLEY CATHETER; LUBRISIL FOLEY CATHETER

Model Number	175810
Health Effect - Clinical Codes	No Consequences Or Impact To Patient (2199); No Known Impact Or Consequence To Patient (2692)
Type of Reportable Event	Malfunction
Additional Manufacturer Narrative
The investigation is still in progress.Once the investigation is complete a supplemental report will be filed.The device was not returned.
Event or Problem Description
It was reported that the catheter was difficult to remove after the saline was withdrawn from the balloon.The catheter was removed by using a lubricant and manual manipulation.The patient voided after the removal without difficulty.Once removed, the nurse tried to fill the balloon again with saline, and noticed the balloon was only inflating on one side.
Additional Manufacturer Narrative
The device was not returned for evaluation.The lot number is unknown; therefore, the device history record could not be reviewed.The instructions for use were found adequate and state the following: ¿to deflate catheter balloon: gently insert a luer slip tip syringe in the catheter valve.Never use more force than is required to make the syringe ¿stick¿ in the valve.If you notice slow or no deflation, re-seat the syringe gently.Allow the balloon to deflate slowly on its own.Do not aspirate or manually accelerate the deflation of the balloon.If permitted by hospital protocol, the valve arm may be severed.If this fails, contact adequately trained professional for assistance, as directed by hospital protocol.Should balloon rupture occur, care should be taken to assure that all balloon fragments have been removed from the patient.Visually inspect the product for any imperfections or surface deterioration prior to use.".
Event or Problem Description
It was reported that the catheter was difficult to remove after the saline was withdrawn from the balloon.The catheter was removed by using a lubricant and manual manipulation.The patient voided after the removal without difficulty.Once removed, the nurse tried to fill the balloon again with saline, and noticed the balloon was only inflating on one side.

• Brand Name: BARDEX® LUBRI-SIL® ALL-SILICONE FOLEY CATHETER
• Common Device Name: LUBRISIL FOLEY CATHETER
• Manufacturer (Section D): C.R. BARD, INC. (COVINGTON) -1018233; 8195 industrial blvd; covington GA 30014
• MDR Report Key: 8374199
• Report Number: 1018233-2019-01054
• Device Sequence Number: 18930020
• Product Code: EZL
• UDI-Device Identifier: 00801741034282
• UDI-Public: (01)00801741034282
• Combination Product (Y/N): N
• Initial Reporter State: RI
• Initial Reporter Country: US
• PMA/510(K) Number: K984084
• Number of Events Summarized: 1
• Summary Report (Y/N): N
• Reporter Type: Manufacturer
• Report Source: other,user facility
• Initial Reporter Occupation: Non-Healthcare Professional
• Type of Report: Initial,Followup
• Report Date (Section B): 03/26/2019

1 Device was Involved in the Event

1 Patient was Involved in the Event

• Is this an Adverse Event Report?: No
• Is this a Product Problem Report?: Yes
• Operator of Device: Health Professional
• Device Model Number: 175810
• Device Catalogue Number: 175810
• Was Device Available for Evaluation?: No
• Initial Date Received by Manufacturer: 02/05/2019
• Supplement Date Received by Manufacturer: 03/08/2019
• Initial Report FDA Received Date: 02/27/2019
• Supplement Report FDA Received Date: 03/26/2019
• Is This a Single-Use Device that was Reprocessed and Reused on a Patient? (Y/N): No
• Patient Sequence Number: 1
• Patient Age: 9 YR