• Decrease font size
  • Return font size to normal
  • Increase font size
U.S. Department of Health and Human Services

MAUDE Adverse Event Report: CAREFUSION ALARIS ET CO2 MODULE; ANALYZER, GAS, CARBON-DIOXIDE, GASEOUS-PHASE22

  • Print
  • Share
  • E-mail
-
Super Search Devices@FDA
510(k) | DeNovo | Registration & Listing | Adverse Events | Recalls | PMA | HDE | Classification | Standards
CFR Title 21 | Radiation-Emitting Products | X-Ray Assembler | Medsun Reports | CLIA | TPLC
 

CAREFUSION ALARIS ET CO2 MODULE; ANALYZER, GAS, CARBON-DIOXIDE, GASEOUS-PHASE22 Back to Search Results
Model Number 8300
Device Problems Pumping Stopped (1503); Device Displays Incorrect Message (2591)
Patient Problem Inadequate Pain Relief (2388)
Event Date 12/18/2018
Event Type  Injury  
Manufacturer Narrative
After further review it was determined that the etc02 module was also a suspect device.Concomitant medical product: (2)8120; 8015; etc02 disp; 8100; (2)syringe tubing; syringe; pri tubing; therapy date: (b)(6) 2018.The customer¿s report of occlusion alarms was not confirmed.No device or device logs were returned or expected to be returned, therefore no failure investigation could be performed.The customer sent a photo of the alaris pcu channel error message.An investigation cannot be performed using the attached photo alone.The root cause of the customer's experience was not identified.
 
Event Description
It was reported that the facility went live with pca modules on (b)(6) 2018; on that day, the nurse (super user) initiated an unspecified pca infusion without difficulty.The next day, as the nurse was moving the iv pole the pca shut off and a channel error code 511.2010 was noticed on the pcu.When the pca was turned back on and the iv pole was moved again, the same issue occurred.As the iv pole was moved the 3rd time, the pca turned off; however in all 3 instances when the pca turned off, the lvp continued to infuse.At this time the pca was replaced with a 2nd pca module, and as the iv pole was moved, the pca shut off and a channel error code 511.2010 again scrolled across the pcu.As a consequence, due to the lack of delivery of pain medication, the patient experienced an increase in pain level.The pca module was taken to the utility room and tested with a new pcu and there were no issues.Subsequent information provided by the customer 3rd party investigation stated that this was an etco2 related issue.
 
Search Alerts/Recalls

  New Search  |  Submit an Adverse Event Report

Brand Name
ALARIS ET CO2 MODULE
Type of Device
ANALYZER, GAS, CARBON-DIOXIDE, GASEOUS-PHASE22
Manufacturer (Section D)
CAREFUSION
10020 pacific mesa blvd
san diego CA 92121 4386
Manufacturer (Section G)
CAREFUSION
10020 pacific mesa blvd
san diego CA 92121 4386
Manufacturer Contact
stephen bilello
10020 pacific mesa blvd
san diego, CA 92121-4386
8586172000
MDR Report Key8495533
MDR Text Key141341869
Report Number2016493-2019-00400
Device Sequence Number1
Product Code CCK
Combination Product (y/n)N
Reporter Country CodeUS
PMA/PMN Number
K031741
Number of Events Reported1
Summary Report (Y/N)N
Report Source Manufacturer
Source Type company representative,health
Reporter Occupation Nurse
Type of Report Initial
Report Date 12/18/2018
1 Device was Involved in the Event
1 Patient was Involved in the Event
Date FDA Received04/09/2019
Is this an Adverse Event Report? Yes
Is this a Product Problem Report? Yes
Device Operator Health Professional
Device Model Number8300
Device Catalogue Number8300
Was Device Available for Evaluation? No
Is the Reporter a Health Professional? Yes
Was Device Evaluated by Manufacturer? No
Is the Device Single Use? No
Is This a Reprocessed and Reused Single-Use Device? No
Type of Device Usage Unknown
Patient Sequence Number1
Patient Outcome(s) Other;
-
-