Ps307029 the head harness connector of the iw910 mobile infant warmer, which was reported to be discoloured, was not returned to fisher & paykel healthcare (f&p) for investigation.Our analysis is accordingly based on our previous investigations into similar complaints and our knowledge of the product.The upper and lower head harnesses are used to connect the head unit to the control unit of the infant warmer.Previous investigations on similar complaints revealed that the discoloration was most likely due to poor electrical contact caused by the degradation of the harness connectors.This degradation is likely a result of swivelling of the warmer head.It should be noted that the subject infant warmer unit was more than 11 years old.All components on the harness assembly of the infant warmer are enclosed in a sheath and fire rated by underwriters laboratories (ul).The entire harness is enclosed in a ul v-0 rated fire retardant enclosure.Should the connectors completely fail, the infant warmer displays an error code and enters a fail safe state where the heater element is disabled and the infant warmer alarms to allow the user to act and provide an alternate means of warming.The infant warmer technical/service manual also contains a checklist which specifies that users perform safety, performance, and functional checks at least once a year.
|