| Model Number |
9-ASD-018 |
| Medical Device Problem Code |
Inadequacy of Device Shape and/or Size (1583)
|
| Health Effect - Clinical Code |
No Known Impact Or Consequence To Patient (2692)
|
| Date of Event |
05/13/2019
|
|
Type of Reportable Event
|
Serious Injury
|
|
Event or Problem Description
|
|
On an unknown date, an 18mm amplatzer septal occluder was implanted.Following the procedure, on (b)(6) 2019, the device was reported to have embolized.On (b)(6) 2019, the device was removed from the patient percutaneously by snaring and re-sheathing.The defect was balloon-sized to 18mm using a 30mm pts sizing balloon (lot number: unknown) and the physician attempted closure with a 22mm amplatzer septal occluder (lot number: 6821072) and 26mm amplatzer septal occluder (lot number: 5562243).Both devices were reported to be mis-sized.Of note, the 26mm amplatzer septal occluder was impinging on the mitral valve.The physician elected to abandoned the procedure and surgical closure is planned for a future time.
|
| |
|
Additional Manufacturer Narrative
|
|
An event of embolization was reported.The results of the investigation are inconclusive since the device was not returned for analysis.The device history record was reviewed to ensure that each manufacturing and inspection operation was performed and the product met all specifications at the time of commercialization.Based on the information received, the cause of the reported incident could not be conclusively determined.
|
| |
|
Additional Manufacturer Narrative
|
|
Supplemental report needed for implant date and anatomical difficulties.Correction: supplemental correction report needed for cause of case abandonment traced to patient anatomy.
|
| |
|
Event or Problem Description
|
|
On (b)(6) 2019, an 18mm amplatzer septal occluder was implanted.Following the procedure, the device was reported to have embolized.On (b)(6) 2019, the device was removed from the patient percutaneously by snaring and re-sheathing.The defect was balloon-sized to 18mm using a 30mm pts sizing balloon (lot number: unknown) and the physician attempted closure with a 22mm amplatzer septal occluder (lot number: 6821072) and 26mm amplatzer septal occluder (lot number: 5562243).Both devices were reported to be mis-sized.Of note, the 26mm amplatzer septal occluder was impinging on the mitral valve.Additionally, the patient had multipls asds and challenging anatomical features which caused the mis-sizing.The physician elected to abandoned the procedure and surgical closure is planned for a future time.
|
| |
|
Search Alerts/Recalls
|