| Model Number |
ZKB00 |
| Medical Device Problem Code |
Adverse Event Without Identified Device or Use Problem (2993)
|
| Health Effect - Clinical Codes |
Halo (2227); No Code Available (3191)
|
| Date of Event |
11/05/2018
|
|
Type of Reportable Event
|
Serious Injury
|
|
Additional Manufacturer Narrative
|
|
(b)(4).All pertinent information available to johnson and johnson surgical vision, inc.Has been submitted.
|
| |
|
Event or Problem Description
|
|
It was reported a zkb00 17.0 diopter intraocular lens (iol) was implanted in the patient's right eye on (b)(6) 2017.It was later explanted on (b)(6) 2018 due to the patient experiencing halos.The procedure was completed successfully with a non-johnson and johnson lens.There is no incision enlargement or suture required.The patient is doing good postoperatively.No further information was provided.Patient has bilateral implants.This report represents the right eye.The left eye will be submitted under a separate report.
|
| |
|
Additional Manufacturer Narrative
|
|
Device available for evaluation: yes.Returned to manufacturer on: 7/2/2019.Device returned to manufacturer: yes.Device evaluation: the product was returned to the manufacturing site in a little jar.The product was disinfected.The product was inspected by a qualified inspector using a microscope with 12x magnification.It can be seen that there is a scratch on posterior side of the optic body and one of the haptics is damaged.In addition, it can be seen that the lens is contaminated, dust particles are present.This is expected as the lens was transported from controlled environment during manufacturing to a non-sterile, non-environmental controlled area.Investigation of the return sample and the condition of the return sample do not suggest the scratch/damage was introduced during manufacturing.The complaint cannot be confirmed.Manufacturing records review: the manufacturing records for the product were reviewed.The product was manufactured and released according to specification.Historical data analysis: a search of complaints revealed no similar complaints were received for this production order number.Conclusion: as a result of the investigation there is no indication of a quality product deficiency and the reported issue could not be verified.All pertinent information available to johnson & johnson surgical vision, inc.Has been submitted.
|
| |
|
Additional Manufacturer Narrative
|
|
This correction mdr is being submitted to address inaccurate information in section f on the xml version of the previous submission caused by a software glitch in the transmission process.The internal non-conformance numbers for this software issue are nr-0148919 and capa-010215.
|
| |
|
Search Alerts/Recalls
|