MAUDE Adverse Event Report: GYRUS ACMI, INC COLLAR BUTTON VENT TUBE (30/PK); TUBE, TYMPANOSTOMY

Model Number	70241314
Medical Device Problem Code	Adverse Event Without Identified Device or Use Problem (2993)
Health Effect - Clinical Code	Unspecified Infection (1930)
Date of Event	02/05/2019
Type of Reportable Event	Serious Injury
Additional Manufacturer Narrative
The device was not returned to the manufacturer for evaluation.The cause of the reported event cannot be determined at this time.An investigation to obtain more detailed information regarding the reported events is ongoing.A device history review (dhr) review was performed and no abnormalities in documentation or process was found.The important medical information sheet provided in the device packaging, states the following, ¿this product is for single use only.It has not been designed to be re-used or re-sterilized.Reprocessing may lead to changes in material characteristics such as metallic corrosion and dulled edges, ceramic and plastic deformation, or splitting which may impact the strength of the device and compromise device performance.Reprocessing of single use devices can also cause cross contamination leading to patient infection.These risks may potentially affect patient safety.
Event or Problem Description
The company representative reported a total of 15 cases of patient infections since (b)(6) 2019 for the same facility.Two cases of infections on this 70241314 vent tube with lot # lz845980.Two cases of infections on this 70241314 vent tube with lot # nc740479.Two cases of infections on this 70241314 vent tube with lot # mh693598.Two cases of infections on this 70241314 vent tube with lot # s835440.Seven cases of infections on this 70241314 vent tube with lot # nc785867.Complaint 3 of 15.
Additional Manufacturer Narrative
This supplemental report is being submitted to report the device evaluation results.Please the updates in sections: d10, g4, g7, h2, h3, h6 and h10.The customer returned a box of 25 unopened and sealed packages of the 70241314 vent tubes (lot lz845980) for evaluation due to ¿patient infections¿.A visual inspection was performed on four of the twenty-five vent tubes that were returned, and verified the condition of the sealed, sterile package(s), which had no perforations, cuts, or irregularities.The sealing on the edge of the packages were well sealed and intact prior to opening.The condition of the blue plastic dispenser casing that encloses the actual vent tube was inspected and verified that the case opens and closes properly.Additionally, the silicone vent tube inside the case shows no signs of defects or other issues.The use by date printed on the packages are well within their time.The inner diameter and flare of the device was measured according to the information provided in the manual; the inner diameter is approximately 1.27mm and the inner flare is 1.5mm which was measure using the caliper.The cause of the reported event cannot be determined.The important medical information sheet provided in the device packaging, states the following, ¿this product is for single use only.It has not been designed to be re-used or re-sterilized.Reprocessing may lead to changes in material characteristics such as metallic corrosion and dulled edges, ceramic and plastic deformation, or splitting which may impact the strength of the device and compromise device performance.Reprocessing of single use devices can also cause cross contamination leading to patient infection.These risks may potentially affect patient safety.¿.
Additional Manufacturer Narrative
This supplemental report is being submitted to report the device evaluation results.Please the updates in sections: d10, g4, g7, h2, h3, h6 and h10.The customer returned a box of 25 unopened and sealed packages of the 70241314 vent tubes (lot lz845980) for evaluation due to ¿patient infections¿.A visual inspection was performed on four of the twenty-five vent tubes that were returned, and verified the condition of the sealed, sterile package(s), which had no perforations, cuts, or irregularities.The sealing on the edge of the packages were well sealed and intact prior to opening.The condition of the blue plastic dispenser casing that encloses the actual vent tube was inspected and verified that the case opens and closes properly.Additionally, the silicone vent tube inside the case shows no signs of defects or other issues.The use by date printed on the packages are well within their time.The inner diameter and flare of the device was measured according to the information provided in the manual; the inner diameter is approximately 1.27mm and the inner flare is 1.5mm which was measure using the caliper.The cause of the reported event cannot be determined.The important medical information sheet provided in the device packaging, states the following, ¿this product is for single use only.It has not been designed to be re-used or re-sterilized.Reprocessing may lead to changes in material characteristics such as metallic corrosion and dulled edges, ceramic and plastic deformation, or splitting which may impact the strength of the device and compromise device performance.Reprocessing of single use devices can also cause cross contamination leading to patient infection.These risks may potentially affect patient safety.¿.
Additional Manufacturer Narrative
This supplemental report is being submitted to provide additional information received and correct the event date.Please see the updates in sections: a1, b3, g4, g7, h2 and h10.Additional information received from the user facility states that the patient underwent a bmt procedure.The patient was reportedly doing better after the ear tubes were removed and replaced.A review of the patient¿s medical was performed and found the following: (b)(6) 2019 bmt.(b)(6) 2019follow up ears still draining (b)(6) 2019 follow up 3 ear infections (b)(6) 2019 bmp tube replacement ref 70241314;sm835440 (b)(6) 2019 better.
Additional Manufacturer Narrative
This supplemental report is being submitted to report the device evaluation results and provide the device manufacture date.Please the updates in sections: d10, g4, g7, h2, h3, h4, h6 and h10.The customer returned 20 boxes of model 70241314.This lot was composed of blank 1186172 lot# nc734636 which completed (b)(4) units each on (b)(6) 2018.This blank lots was made from silicone material 0450002 lot# nc694027 which was blended on (b)(6) 26th 2018 from compound 0385012 lot #81914, blue silicone 2430090 lot# 805478 and white silicone 2430092 lot # 670703.There are no indication from receipt or dhr records that there was any abnormality with any of the materials used to create the finished good 70241314.This performance report did not find any evidence that there was any manufacturer related issue that contributed to this reported instance.Outside of going through the normal blending, molding and packaging process, the only common component between all of the reported impacted lots (nc740479, lz845980, sm835440, nc785867, mh693598) is the white silicone material 2430092 lot# 670703 was used to blend into all of the material.This material has been in use since (b)(6) 2014 with no other reported instances before this reported instance.

• Brand Name: COLLAR BUTTON VENT TUBE (30/PK)
• Common Device Name: TUBE, TYMPANOSTOMY
• Manufacturer (Section D): GYRUS ACMI, INC; 136 turnpike road; southborough MA 01772
• MDR Report Key: 8948333
• Report Number: 2951238-2019-01077
• Device Sequence Number: 11362641
• Product Code: ETD
• UDI-Device Identifier: 00821925026537
• UDI-Public: (01)00821925026537
• Combination Product (Y/N): N
• Initial Reporter State: GA
• Initial Reporter Country: US
• PMA/510(K) Number: K960477
• Number of Events Summarized: 1
• Summary Report (Y/N): N
• Reporter Type: Manufacturer
• Report Source: company representative,user f
• Initial Reporter Occupation: Other
• Type of Report: Initial,Followup,Followup,Followup
• Report Date (Section B): 06/05/2020

1 Device was Involved in the Event

1 Patient was Involved in the Event

• Is this an Adverse Event Report?: Yes
• Is this a Product Problem Report?: No
• Operator of Device: Health Professional
• Device Model Number: 70241314
• Device Lot Number: NC740479
• Was Device Available for Evaluation?: Device Returned to Manufacturer
• Date Returned to Manufacturer: 08/12/2019
• Was the Report Sent to FDA?: No
• Initial Date Received by Manufacturer: 08/02/2019
• Supplement Date Received by Manufacturer: 09/04/2019; 01/15/2020; 09/04/2019
• Initial Report FDA Received Date: 08/29/2019
• Supplement Report FDA Received Date: 10/02/2019; 02/04/2020; 06/05/2020
• Is This a Single-Use Device that was Reprocessed and Reused on a Patient? (Y/N): No
• Patient Sequence Number: 1
• Outcome Attributed to Adverse Event: Other