Device was used for treatment, not diagnosis.(b)(4).As of this date, the device has not been returned for evaluation; therefore, the reported condition cannot be confirmed and/or duplicated.If information is obtained that was not available for the initial medwatch, a follow-up medwatch will be filed as appropriate.
|
This is report 2 of 3 for the same event.It was reported by the sales rep that during a rotator cuff repair procedure the customer's expressew iii auto capture + gun and three expressew iii auto capture + retention plates/loading were not capturing the suture.The plates were loaded correctly on the gun.The procedure was completed with a competitor's device with no patient harm but there was a 20 minute surgical delay to the case.The sales rep was not present for the case therefore could not provide any further information.The sales rep is unsure if the gun or the plates are causing the issue therefore all the devices are being returned for evaluation.There was a delay in the surgical procedure.There was a spare device available for use to complete the surgery.There was patient involvement.There were no reports of injuries, medical intervention or prolonged hospitalization.All available information has been disclosed.If additional information medwatch will become available, supplemental medwatch will be submitted accordingly.
|
Depuy synthes is submitting this report pursuant to the provisions of 21 cfr, part 803.This report may be based on information which depuy synthes has not been able to investigate or verify prior to the required reporting date.This report does not reflect a conclusion by fda, depuy synthes or its employees that the report constitutes an admission that the device, depuy synthes, or its employees caused or contributed to the potential event described in this report.Device was used for treatment, not diagnosis.If information is obtained that was not available for the initial medwatch, a follow-up medwatch will be filed as appropriate.Investigation summary: the complaint device is not being returned, therefore unavailable for a physical evaluation.This complaint cannot be confirmed.A manufacturing record evaluation was performed for the finished device [54860] number, and no non-conformances were identified.No further information regarding the technique or instruments used has been provided to determine a root cause for this failure.If any additional information is obtained, this complaint will be re-opened to capture that information.At this point in time, no corrective action is required, and no further action is warranted.However, depuy synthes mitek will continue to track any related complaints within this device family as a means of monitoring the extent with which this complaint is observed in the field.Device history lot : a manufacturing record evaluation was performed for the finished device [54860] number, and no non-conformances were identified.
|