• Decrease font size
  • Return font size to normal
  • Increase font size
U.S. Department of Health and Human Services

MAUDE Adverse Event Report: BIOMET MICROFIXATION TMJ SYSTEM CROSS DRIVE FOSSA SCREW; PLATE, BONE

  • Print
  • Share
  • E-mail
-
Super Search Devices@FDA
510(k) | DeNovo | Registration & Listing | Adverse Events | Recalls | PMA | HDE | Classification | Standards
CFR Title 21 | Radiation-Emitting Products | X-Ray Assembler | Medsun Reports | CLIA | TPLC
 

BIOMET MICROFIXATION TMJ SYSTEM CROSS DRIVE FOSSA SCREW; PLATE, BONE Back to Search Results
Model Number N/A
Device Problem Adverse Event Without Identified Device or Use Problem (2993)
Patient Problems Ossification (1428); Pain (1994); Loss of Range of Motion (2032); Scar Tissue (2060); No Code Available (3191); No Clinical Signs, Symptoms or Conditions (4582)
Event Date 05/23/2019
Event Type  Injury  
Manufacturer Narrative
Zimmer biomet complaint (b)(4).It is unknown at this time if the device will be returned for evaluation; however, an investigation of the reported event is in progress.Once the investigation is completed, a supplemental medwatch 3500a will be submitted.Multiple mdr reports were filed for this event, please see associated reports: 0001032347-2019-00496, 0001032347-2019-00497, 0001032347-2019-00498, 0001032347-2019-00499, 0001032347-2019-00500, 0001032347-2019-00501, 0001032347-2019-00502, 0001032347-2019-00503, 0001032347-2019-00504, 0001032347-2019-00505.Concomitant medical products: medical products: tmj system right narrow mandibular component, part# 01-6545, lot# 744080c, tmj system right fossa component small, part# 24-6562, lot# 651390a, tmj system left fossa component small, part# 24-6563, lot# 721550b, tmj system left standard offset mandibular component, part# 24-6651, lot# 541450a, 2.4mm system high torque (ht) cross-drive screw, part# 91-2708, lot# unknown, 2.4mm system high torque (ht) cross-drive screw, part# 91-2710, lot# unknown, tmj system cross drive fossa screw, part# 99-6577, lot# unknown, tmj system cross drive fossa screw, part# 99-6579, lot# unknown, tmj system cross drive emergency fossa screw, part# 99-6587, lot# unknown, tmj system cross drive emergency fossa screw, part# 99-6589, lot# unknown.
 
Event Description
It was reported the patient underwent a bilateral revision of temporomandibular implants due to an unknown reason.Attempts have been made to gather additional information but none has been provided.No additional patient consequences were reported.
 
Event Description
This follow-up report is being submitted to relay additional information.
 
Manufacturer Narrative
This follow-up report is being submitted to relay additional information.The complaint was opened because sales rep roger guy submitted a bill only for a tmj revision case.No product was returned, therefore no functional tests or inspections could be performed.No x-rays, scans, pictures, or physician's reports were provided.Because a revision surgery was reported, the complaint is confirmed.It was reported that the patient had a bilateral tmj revision where the hardware was removed and replaced.Three attempts were made for additional event details and product return.The most likely underlying cause of the complaint could not be determined.There are no indications of manufacturing defects the devices used in this case did not have the complaints and sales histories reviewed for this risk assessment due to the lack of information provided and the inability to identify the failure mode that led to the revision surgery.The dhr of this product could not be reviewed due to the lot number being unknown if any further information is found which would change or alter any conclusions or information, a supplemental report will be filed accordingly.Zimmer biomet will continue to monitor for trends.The following fields were updated: updated to reflect date of report.Updated to describe event or problem.Updated to reflect contact information.Date received by manufacturer.Updated to reflect type of report and follow-up number.Updated to reflect follow-up type.Updated to reflect device evaluated.Updated to reflect method, results & conclusions.Updated to reflect additional narratives/data provided.
 
Manufacturer Narrative
This follow-up report is being submitted to relay additional information.If any further information is found which would change or alter any conclusions or information, a supplemental report will be filed accordingly.Zimmer biomet will continue to monitor for trends.
 
Event Description
It was been further reported that the patient underwent a revision of temporomandibular mandible component and screws due to an unknown reason.
 
Event Description
No further event information is available at the time of this report.
 
Manufacturer Narrative
This report is being submitted to update additional information in sections a3, a4, a5, b4, b5, b7, d6b, g3, g6, h2, h6 and h10.
 
Event Description
It is further known that the patient's left mandible and screws were revised due to decrease mouth opening, pain, heterotopic bone formation, and stiffness.During the surgery extensive scar tissue was noted.The left fossa was exchanged along with the screws, the right fossa was repositioned, and screws were exchanged during this procedure.Wounds were also packed with harvested fat without complications.
 
Manufacturer Narrative
This follow-up report is being submitted to relay additional information.Medical records & ct scans were provided and reviewed by a health care professional.Review of the available records identified the following: on the left side, hypertrophic scarring was excised from the preauricular region, temporal hardware was removed, mandible hardware was removed after excising bone growth and coronoidectomy, heterotopic bone growth to mandibular stump, coronoid process, and along the base of the skull, which was excised along with extensive scar tissue, and the fossa was positioned more posteriorly and secured with screws and packed with autogenous fat harvested from the abdomen.On the right side, hypertrophic scarring was excised along the preauricular region and neck, temporal hardware was removed, removal of the condyle hardware along the mandible, excision of hypertrophic bone to the mandible extending to the base of the skull and coronoidectomy, fossa was positioned more posteriorly and secured with screws and packed with autogenous fat harvested from abdomen, occlusion was found to be excellent; mouth opens to over 50mm, maxillomandibular fixation screws were removed, retained hardware along the temporomandibular joint prosthesis, including along the mandibular ramus and temporal bone, no complications.A definitive root cause cannot be determined.This report is being submitted to update additional information in section b4, b5, g3, g6, h2, h3, and h10.
 
Event Description
No further event information is available at the time of this report.
 
Search Alerts/Recalls

  New Search  |  Submit an Adverse Event Report

Brand Name
TMJ SYSTEM CROSS DRIVE FOSSA SCREW
Type of Device
PLATE, BONE
Manufacturer (Section D)
BIOMET MICROFIXATION
1520 tradeport drive
jacksonville FL 32218
Manufacturer (Section G)
BIOMET MICROFIXATION
1520 tradeport drive
jacksonville FL 32218
Manufacturer Contact
christopher pappas
1520 tradeport drive
jacksonville, FL 32218
9047414400
MDR Report Key9365718
MDR Text Key168448896
Report Number0001032347-2019-00503
Device Sequence Number1
Product Code JEY
UDI-Device Identifier00841036057459
UDI-Public00841036057459
Combination Product (y/n)N
Reporter Country CodeUS
PMA/PMN Number
K910038
Number of Events Reported1
Summary Report (Y/N)N
Report Source Manufacturer
Source Type Health Professional,User Facility
Reporter Occupation Physician
Type of Report Initial,Followup,Followup,Followup,Followup
Report Date 01/12/2023
1 Device was Involved in the Event
1 Patient was Involved in the Event
Date FDA Received11/22/2019
Is this an Adverse Event Report? Yes
Is this a Product Problem Report? No
Device Operator Health Professional
Device Model NumberN/A
Device Catalogue Number99-6579
Was Device Available for Evaluation? No
Is the Reporter a Health Professional? Yes
Was the Report Sent to FDA? No
Date Manufacturer Received01/11/2023
Was Device Evaluated by Manufacturer? Yes
Is the Device Single Use? Yes
Is This a Reprocessed and Reused Single-Use Device? No
Type of Device Usage Initial
Removal/Correction NumberN/A
Patient Sequence Number1
Patient Outcome(s) Hospitalization; Required Intervention;
Patient Age18 YR
Patient SexFemale
Patient Weight51 KG
Patient RaceBlack Or African American
-
-