BIOSENSE WEBSTER INC WEBSTER ELECTROPHYSIOLOGY CATHETER; ELECTRODE, PACEMAKER, TEMPORARY
|
Back to Search Results |
|
Model Number 1086259RT |
Device Problem
Adverse Event Without Identified Device or Use Problem (2993)
|
Patient Problem
Cardiac Tamponade (2226)
|
Event Date 12/19/2019 |
Event Type
Injury
|
Manufacturer Narrative
|
Since the product was not returned for analysis, no product failure analysis can be conducted and no determination of possible contributing factors could be made.As such, the investigation will be closed.If the complaint device is received in the future we will reopen the complaint and perform the investigation as appropriate.The thermocool® smart touch® sf bi-directional navigation (stsf) catheter was initially reported in report number: 2029046-2020-00058.However, additional info was received 1/15/2020 indicating that the physician¿s opinion regarding the cause of the adverse event is that it was caused by an right ventricle (rv) webster¿ electrophysiology catheter.The initially reported stsf catheter has been updated in the concomitants section.If additional information is received regarding this event, a supplemental 3500a report will be submitted to the fda.Manufacture reference no: (b)(4).
|
|
Event Description
|
It was reported that a female patient underwent an idiopathic ventricular tachycardia (idvt) ablation procedure with a webster¿ electrophysiology catheter and suffered cardiac tamponade requiring pericardiocentesis.During the procedure while using an stsf catheter noise was observed from the catheter electrodes being displayed on the carto 3 and electrophysiology recording systems.The cable was replaced, but the issue remained.The catheter was then exchanged, and the issue was resolved.The procedure continued successfully.The carto 3 system was operating per specifications and is not considered responsible of the issue.The catheter was determined to be the root cause of the issue experienced.It was also reported that pericardial effusion was noted after transseptal access and after some ablations were done with the replacement stsf catheter.The patient¿s systolic blood pressure dropped to 90, and cardiac tamponade was confirmed by ultrasound and intracardiac echocardiography (ice).Pericardiocentesis was performed and a total of 330 cc of fluid was removed from the pericardial space.The procedure continued and some other ablations were done.However, the procedure was unable to be completed due to the proximity of the conduction system to the area of ablation.No ablation was done prior to the effusion.No transseptal puncture was performed and there was no evidence of a steam pop.It is unknown if extended hospitalization was required.The pigtail catheter was still in the patient for drainage.The patient was reported to be in stable condition and fully recovered.The physician¿s opinion regarding the cause of the adverse event is that it was caused by a right ventricle (rv) webster 6 pole catheter.No bwi product malfunctions were reported.Transseptal puncture was not performed.No ablation was done prior to the adverse event.The flow setting was at low flow of 2ml.No error messages were observed on any bwi equipment.The force visualization features used included dashboard, vector and visitag.The parameters for stability used were impedance drop for color, 2mm for 4 sec.No additional filter was used.The color option used prospectively was impedance drop.
|
|
Manufacturer Narrative
|
Additional information was received on 1/20/2020 indicating both catheters (thermocool® smart touch® sf bi-directional navigation catheter & webster¿ electrophysiology catheter) were used.The female patient underwent an idiopathic ventricular tachycardia (idvt) ablation procedure with both thermocool® smart touch® sf bi-directional navigation catheter & webster¿ electrophysiology catheters and suffered cardiac tamponade requiring pericardiocentesis.The thermocool® smart touch® sf bi-directional navigation catheter was reported in the initial report.If additional information is received regarding this event, a supplemental 3500a report will be submitted to the fda.Manufacture reference no: (b)(4).
|
|
Search Alerts/Recalls
|
|
|