MAUDE Adverse Event Report: EXACTECH, INC. OPTETRAK; CEMENTED CR FEMORAL SZ 2

Model Number	200-01-02
Medical Device Problem Code	Adverse Event Without Identified Device or Use Problem (2993)
Health Effect - Clinical Code	No Information (3190)
Date of Event	03/12/2013
Type of Reportable Event	Serious Injury
Additional Manufacturer Narrative
As reported by (b)(6) national joint registry ((b)(6)), this (b)(6) y/o, 147 cm, (b)(6) kg (bmi=41), female patient underwent primary total prosthetic replacement using cement of the left knee via medial parapatellar approach on (b)(6) 2009.The indication for the index procedure was osteoarthritis.On (b)(6) 2013, approximately 47 months post implantation, the patient underwent revision due to other indication for revision.Follow-ups for additional information cannot be performed for this complaint, information was submitted as complete by the (b)(6) national joint registry ((b)(6)); there is no identification of facilities or surgeons.All available information about the event and/or patient has been provided.These devices are used for treatment not diagnosis.It is found in a review of the labeling and ifu 700-096-004, it is known that device specific risks consist of: fracture, migration, loosening, subluxation, or dislocation of the prothesis or any of its components, any of which may require a second surgical intervention or revision.As part of the preoperative assessment, the surgeon must ensure that no biological, biomechanical, or other factors exist that might adversely affect the surgery and/or postoperative period.Revisions or surgical interventions are a known complication found in joint replacements.All patients should be instructed on the limitations of the prosthesis and the possibility of subsequent surgery.The patient should be cautioned to monitor activities and protect the replaced joint from unreasonable stresses and follow the written instructions of the physician with respect to follow-up care and treatment.The surgeon must be fully knowledgeable about all aspects of the surgical technique to use the implants in accordance with the indications and contraindications and be trained according to the proper use of the system instrumentation and implants.It is a known complication that a patient¿s age, weight, or activity level would cause the surgeon to expect early failure of the system.As noted in ¿why are total knee arthroplasties failing today¿has anything changed after 10 years?¿,the top five reasons for total knee arthroplasty revision/surgical intervention account for approximately 85% of the reasons that drive revision/surgical intervention.The failure mechanisms are as follows: 39.9% for loosening; 27.4% for infection; 7.35% for instability; 4.7% for periprosthetic fracture; and 4.5 % for arthrofibrosis.In early revisions (less than two years) infection was found to be the most common failure mechanism and late revisions show aseptic loosening as the most common reason.Sharkey, p.L.(2014, september).Why are total knee arthroplasties failing today¿has anything changed after 10 years?; the journal of arthroplasty, 29.Based on review of all available information, there is no evidence to suggest that the reported event is related to any device design or manufacturing issues.The event reported was likely the result of patient conditions.The patient has a high bmi which indicates that they are overweight, this can increase biomechanical stressors on natural and artificial joints.No additional patient medical history information is provided.This submission represents 1 of 163 events identified via active surveillance activities utilizing data form the (b)(6) national joint registry ((b)(6)).Follow-ups for additional information cannot be performed for this complaint as the information was submitted as complete by the registry; there is no identification of facilities or surgeons.All available information about the event and/or patient has been provided and it is not possible to obtain any of the devices.Concomitant devices: (cn: 200-04-22, sn: (b)(4)) - optetrak knee system - cemented finned tibial tray - sizes 1f/2t 2f.(cn: 200-22-11, sn: (b)(4)) ¿ optetrak knee system - cruciate retained (cr) tibial insert - size 2 - 11mm.(cn: 66017569, sn: (b)(4)) - heraeus medical antibiotic loaded high viscosity bone cement.No information provided in the following section(s): race and test dates.
Event or Problem Description
As reported by (b)(6) national joint registry ((b)(6)), this (b)(6) y/o, 147 cm, (b)(6) kg (bmi=41), female patient underwent primary total prosthetic replacement using cement of the left knee via medial parapatellar approach on (b)(6) 2009.The indication for the index procedure was osteoarthritis.On (b)(6) 2013, approximately 47 months post implantation, the patient underwent revision due to other indication for revision.Follow-ups for additional information cannot be performed for this complaint, information was submitted as complete by the (b)(6) national joint registry ((b)(6)); there is no identification of facilities or surgeons.All available information about the event and/or patient has been provided.These devices are used for treatment not diagnosis.Based on review of all available information, there is no evidence to suggest that the reported event is related to any device design or manufacturing issues.The event reported was likely the result of patient conditions.The patient has a high bmi which indicates that they are overweight, this can increase biomechanical stressors on natural and artificial joints.No additional patient medical history information is provided.

• Brand Name: OPTETRAK
• Common Device Name: CEMENTED CR FEMORAL SZ 2
• Manufacturer (Section D): EXACTECH, INC.; 2320 nw 66 court; gainesville FL 32653
• MDR Report Key: 9709328
• Report Number: 1038671-2020-00126
• Device Sequence Number: 16979682
• Product Code: JWH
• UDI-Device Identifier: 10885862039521
• UDI-Public: 10885862039521
• Combination Product (Y/N): N
• Initial Reporter Country: UK
• PMA/510(K) Number: K932690
• Number of Events Summarized: 1
• Summary Report (Y/N): N
• Device Implanted Year: 2009
• Device Explanted Year: 2013
• Reporter Type: Manufacturer
• Report Source: company representative,consum
• Initial Reporter Occupation: Other
• Type of Report: Initial
• Report Date (Section B): 02/13/2020

1 Device was Involved in the Event

1 Patient was Involved in the Event

• Is this an Adverse Event Report?: Yes
• Is this a Product Problem Report?: No
• Operator of Device: Health Professional
• Device Expiration Date: 02/01/2014
• Device Model Number: 200-01-02
• Device Catalogue Number: 200-01-02
• Was Device Available for Evaluation?: No
• Type of Report(Section G): Thirty-Day
• Initial Date Received by Manufacturer: 01/15/2020
• Initial Report FDA Received Date: 02/13/2020
• Is This a Single-Use Device that was Reprocessed and Reused on a Patient? (Y/N): No
• Patient Sequence Number: 1
• Outcome Attributed to Adverse Event: Required Intervention
• Patient Age: 76 YR
• Patient Weight: 89