MAUDE Adverse Event Report: C.R. BARD, INC. (COVINGTON) -1018233 BARDEX® LUBRI-SIL® ALL-SILICONE FOLEY CATHETER; BARD LUBRISIL FOLEY CATHETER

Model Number	73022L
Health Effect - Clinical Codes	No Consequences Or Impact To Patient (2199); No Known Impact Or Consequence To Patient (2692)
Type of Reportable Event	Malfunction
Additional Manufacturer Narrative
The investigation is still in progress.Once the investigation is complete, a supplemental report will be filed.The device was not returned.
Event or Problem Description
It was reported that there was no flow from the 3-way silicone foley catheter, and the physician was unable to irrigate the catheter using a syringe.Reportedly, it was the second time the incident had occurred.
Event or Problem Description
It was reported that there was no flow from the 3-way silicone foley catheter, and the physician was unable to irrigate the catheter using a syringe.Reportedly, it was the second time the incident had occurred.
Additional Manufacturer Narrative
The device was not returned for evaluation.A potential failure mode could be ¿reduced or no irrigation flow¿ with a potential root cause of ¿kinked/pinched irrigation lumen or no irrigation eye¿.The lot number is unknown; therefore, the device history record could not be reviewed.The instructions for use were found adequate and state the following: ¿to deflate catheter balloon: gently insert a luer slip tip syringe in the catheter valve.Never use more force than is required to make the syringe ¿stick¿ in the valve.Allow the pressure within the balloon to force the plunger back and fill the syringe with water.If you notice slow or no deflation, re-seat the syringe gently.Use only gentle aspiration to encourage deflation if needed.Vigorous aspiration may collapse the inflation lumen, preventing balloon deflation.If necessary, contact adequately trained professional for assistance, as directed by hospital protocol.Should balloon rupture occur, care should be taken to assure that all balloon fragments have been removed from the patient." h11:section a through f - the information provided by bd represents all of the known information at this time.Despite good faith efforts to obtain additional information, the complainant / reporter was unable or unwilling to provide any further patient, product, or procedural details to bd.H3 other text : the device was not returned.

• Brand Name: BARDEX® LUBRI-SIL® ALL-SILICONE FOLEY CATHETER
• Common Device Name: BARD LUBRISIL FOLEY CATHETER
• Manufacturer (Section D): C.R. BARD, INC. (COVINGTON) -1018233; 8195 industrial blvd; covington GA 30014
• MDR Report Key: 9750772
• Report Number: 1018233-2020-01315
• Device Sequence Number: 2663786
• Product Code: EZL
• UDI-Device Identifier: 00801741034329
• UDI-Public: (01)00801741034329
• Combination Product (Y/N): N
• Initial Reporter Country: CA
• PMA/510(K) Number: K070558
• Number of Events Summarized: 1
• Summary Report (Y/N): N
• Reporter Type: Manufacturer
• Report Source: company representative,other
• Initial Reporter Occupation: Non-Healthcare Professional
• Type of Report: Initial,Followup
• Report Date (Section B): 03/19/2020

1 Device was Involved in the Event

1 Patient was Involved in the Event

• Is this an Adverse Event Report?: No
• Is this a Product Problem Report?: Yes
• Operator of Device: Health Professional
• Device Model Number: 73022L
• Device Catalogue Number: 73022L
• Was Device Available for Evaluation?: No
• Initial Date Received by Manufacturer: 02/03/2020
• Supplement Date Received by Manufacturer: 03/10/2020
• Initial Report FDA Received Date: 02/25/2020
• Supplement Report FDA Received Date: 03/19/2020
• Is This a Single-Use Device that was Reprocessed and Reused on a Patient? (Y/N): No
• Patient Sequence Number: 1