MAUDE Adverse Event Report: DEPUY MITEK LLC US RESTORE ACORNREAM 10MM THIN *EA; CANNULATED SURGICAL DRILL

Model Number	219335
Medical Device Problem Code	Dull, Blunt (2407)
Health Effect - Clinical Code	No Consequences Or Impact To Patient (2199)
Date of Event	01/26/2017
Type of Reportable Event	Malfunction
Additional Manufacturer Narrative
Product complaint # (b)(4).If information is obtained that was not available for the initial medwatch, a follow-up medwatch will be filed as appropriate.Investigation summary: the complaint device was received and evaluated.Visual observation reveals the cutting side of the distal tip of the reamer appears worn and dull possibly from heavy use.Thus, the complaint can be confirmed.This failure is typical of excessive abuse of the device and therefore can be attributed to field wear.An mre cannot be performed as the lot number is unknown.At this point in time, no further action is warranted.However, depuy synthes mitek will continue to track any related complaints within this device family as a means of monitoring the extent with which this complaint is observed in the field.(b)(4).The lot number is unknown.
Event or Problem Description
The sales rep reported via phone that the customer's 8mm and two of the 10 mm acorn reamer thin are dull therefore could not be used for an acl procedure.The case was completed with another like device.The sales rep was not present for the case but reported no adverse patient consequences or delay.The devices will be returned for evaluation.
Additional Manufacturer Narrative
Depuy synthes is submitting this report pursuant to the provisions of 21 cfr, part 803.This report may be based on information which depuy synthes has not been able to investigate or verify prior to the required reporting date.This report does not reflect a conclusion by fda, depuy synthes or its employees that the report constitutes an admission that the device, depuy synthes, or its employees caused or contributed to the potential event described in this report.If the information is unknown, not available or does not apply, the section/field of the form is left blank.Device was used for treatment, not diagnosis.If information is obtained that was not available for the initial medwatch, a follow-up medwatch will be filed as appropriate.Additional information: investigation summary - the complaint device was received and evaluated.Visual observation reveals the cutting side of the distal tip of the reamer appears worn and dull possibly from heavy use.Thus, the complaint can be confirmed.This failure is typical of excessive abuse of the device and therefore can be attributed to field wear.An mre cannot be performed as the lot number is unknown.At this point in time, no further action is warranted.However, depuy synthes mitek will continue to track any related complaints within this device family as a means of monitoring the extent with which this complaint is observed in the field.

• Common Device Name: CANNULATED SURGICAL DRILL
• Manufacturer (Section D): DEPUY MITEK LLC US; 325 paramount drive; raynham MA 02767
• MDR Report Key: 9771136
• Report Number: 1221934-2020-00708
• Device Sequence Number: 13599789
• Product Code: HTO
• UDI-Device Identifier: 10886705005802
• UDI-Public: 10886705005802
• Combination Product (Y/N): N
• Initial Reporter Country: US
• PMA/510(K) Number: EXEMPT
• Number of Events Summarized: 1
• Summary Report (Y/N): N
• Reporter Type: Manufacturer
• Report Source: company representative,other
• Initial Reporter Occupation: Other
• Type of Report: Initial,Followup
• Report Date (Section B): 01/26/2017

1 Device was Involved in the Event

1 Patient was Involved in the Event

• Is this an Adverse Event Report?: No
• Is this a Product Problem Report?: Yes
• Operator of Device: Health Professional
• Device Model Number: 219335
• Device Catalogue Number: 219335
• Device Lot Number: UNKNOWN
• Was Device Available for Evaluation?: Device Returned to Manufacturer
• Date Returned to Manufacturer: 02/11/2020
• Initial Date Received by Manufacturer: 02/28/2020
• Supplement Date Received by Manufacturer: 03/17/2020
• Initial Report FDA Received Date: 02/28/2020
• Supplement Report FDA Received Date: 03/18/2020
• Patient Sequence Number: 1