MAUDE Adverse Event Report: DEPUY MITEK LLC US LATARJET GLENOID LONG DRILL BIT 3.2; SURGICAL HAND DRILL

Model Number	285300
Medical Device Problem Code	Dull, Blunt (2407)
Health Effect - Clinical Code	No Consequences Or Impact To Patient (2199)
Date of Event	02/25/2020
Type of Reportable Event	Malfunction
Additional Manufacturer Narrative
Product complaint #: (b)(4).Depuy synthes is submitting this report pursuant to the provisions of 21 cfr, part 803.This report may be based on information which depuy synthes has not been able to investigate or verify prior to the required reporting date.This report does not reflect a conclusion by fda, depuy synthes or its employees that the report constitutes an admission that the device, depuy synthes, or its employees caused or contributed to the potential event described in this report.Device was used for treatment, not diagnosis.If information is obtained that was not available for the initial medwatch, a follow-up medwatch will be filed as appropriate.Initial reporter phone number: (b)(6).Udi: (b)(4).The lot number is unknown.
Event or Problem Description
It was reported by the affiliate via email that during an unknown procedure the latarjet glenoid long drill bit 3.2 and the latarjet cc step drill 3.2 mm were a bit blunt.No patient consequence and no surgical delay was reported.No additional information was provided.
Additional Manufacturer Narrative
Depuy synthes is submitting this report pursuant to the provisions of 21 cfr, part 803.This report may be based on information which depuy synthes has not been able to investigate or verify prior to the required reporting date.This report does not reflect a conclusion by fda, depuy synthes or its employees that the report constitutes an admission that the device, depuy synthes, or its employees caused or contributed to the potential event described in this report.If the information is unknown, not available or does not apply, the section/field of the form is left blank.Device was used for treatment, not diagnosis.If information is obtained that was not available for the initial medwatch, a follow-up medwatch will be filed as appropriate.H10 additional narrative: additional information: b5: subsequent follow-up with the customer, additional information was received.It was reported that there was a surgical delay of maybe one minute, very minimal.The case was completed using the drill bit that was blunt.There was no alternative product available as the drill could still be used.There was no surgical intervention planned.
Additional Manufacturer Narrative
Depuy synthes is submitting this report pursuant to the provisions of 21 cfr, part 803.This report may be based on information which depuy synthes has not been able to investigate or verify prior to the required reporting date.This report does not reflect a conclusion by fda, depuy synthes or its employees that the report constitutes an admission that the device, depuy synthes, or its employees caused or contributed to the potential event described in this report.If the information is unknown, not available or does not apply, the section/field of the form is left blank.Device was used for treatment, not diagnosis.If information is obtained that was not available for the initial medwatch, a follow-up medwatch will be filed as appropriate.H10 additional narrative: investigation summary: the complaint device is not being returned, therefore unavailable for a physical evaluation.However a photo was provided.  upon visual inspection of the photo, confirms the distal end of the device is dull and the device appears worn.The complaint reported was confirmed.The photo do not provide enough evidence to determine root cause.Hands on analysis should provide the evidence necessary to confirm the root cause.The possible root cause for the reported failure can be attributed to field wear due to rough handling, however; this cannot be conclusive determined.Given that invalid lot number was provided, a manufacturing record evaluation (mre) review cannot be performed.If the lot number becomes available, the mre review will be performed.At this point in time, no corrective action is required, and no further action is warranted.However, depuy synthes mitek will continue to track any related complaints within this device family as a means of monitoring the extent with which this complaint is observed in the field.

• Brand Name: LATARJET GLENOID LONG DRILL BIT 3.2
• Common Device Name: SURGICAL HAND DRILL
• Manufacturer (Section D): DEPUY MITEK LLC US; 325 paramount drive; raynham MA 02767
• MDR Report Key: 9808696
• Report Number: 1221934-2020-00794
• Device Sequence Number: 2815627
• Product Code: LXH
• UDI-Device Identifier: 10886705018093
• UDI-Public: 10886705018093
• Combination Product (Y/N): N
• Initial Reporter Country: AS
• PMA/510(K) Number: EXEMPT
• Number of Events Summarized: 1
• Summary Report (Y/N): N
• Reporter Type: Manufacturer
• Report Source: company representative,foreig
• Initial Reporter Occupation: Other
• Type of Report: Initial,Followup,Followup
• Report Date (Section B): 02/25/2020

1 Device was Involved in the Event

1 Patient was Involved in the Event

• Is this an Adverse Event Report?: No
• Is this a Product Problem Report?: Yes
• Operator of Device: Health Professional
• Device Model Number: 285300
• Device Catalogue Number: 285300
• Device Lot Number: UNKNOWN
• Was Device Available for Evaluation?: Yes
• Initial Date Received by Manufacturer: 02/25/2020
• Supplement Date Received by Manufacturer: 03/16/2020; 04/27/2020
• Initial Report FDA Received Date: 03/09/2020
• Supplement Report FDA Received Date: 03/17/2020; 04/28/2020
• Patient Sequence Number: 1