MAUDE Adverse Event Report: BOSTON SCIENTIFIC CORPORATION MAXFORCE; CATHETER, BILIARY, DIAGNOSTIC

Model Number	M00567340
Medical Device Problem Codes	Material Puncture/Hole (1504); Obstruction of Flow (2423)
Health Effect - Clinical Code	No Consequences Or Impact To Patient (2199)
Date of Event	01/31/2020
Type of Reportable Event	Malfunction
Additional Manufacturer Narrative
(b)(4).Investigation result: a visual examination of the returned complaint device revealed that the balloon did not have any visual defects and was in a good condition.The catheter of the device was carefully inspected and no damages were found.Functional analysis was attempted to be performed; however, the balloon lumen was occluded, and could not be unblocked.A microscopic examination of the balloon found a pinhole over the proximal section of the ro marker.This failure is likely due to factors or conditions related to the procedure during the use of the device, such as the manner in which the device was handled and manipulated, and/or the interaction between the scope and device, that could have affected its performance and its intended purpose.Therefore, the most probable root cause is adverse event related to procedure.A review of the device history record (dhr) was performed and confirmed that this device met all material, assembly and performance specifications.A labeling review was performed and from the information available, this device was used per the directions for use (dfu)/product label.
Event or Problem Description
It was reported to boston scientific corporation that a maxforce biliary dilatation balloon was used during a dilatation in the common bile duct procedure performed on (b)(6) 2020.According to the complainant, during the procedure, it was noticed that it was not possible to build pressure in the balloon.The procedure was completed with another maxforce biliary dilatation balloon.There were no patient complications reported as a result of this event.The patient condition at the conclusion of the procedure was reported to be stable.Investigation results revealed that the balloon had a pinhole; therefore, this is now an mdr reportable event.

• Brand Name: MAXFORCE
• Common Device Name: CATHETER, BILIARY, DIAGNOSTIC
• Manufacturer (Section D): BOSTON SCIENTIFIC CORPORATION; 300 boston scientific way; marlborough MA 01752
• MDR Report Key: 9987004
• Report Number: 3005099803-2020-01640
• Device Sequence Number: 3896970
• Product Code: FGE
• UDI-Device Identifier: 08714729097051
• UDI-Public: 08714729097051
• Combination Product (Y/N): N
• Initial Reporter Country: GM
• PMA/510(K) Number: K910931
• Number of Events Summarized: 1
• Summary Report (Y/N): N
• Reporter Type: Manufacturer
• Report Source: company representative,foreig
• Initial Reporter Occupation: Physician
• Type of Report: Initial
• Report Date (Section B): 04/22/2020

1 Device was Involved in the Event

1 Patient was Involved in the Event

• Is this an Adverse Event Report?: No
• Is this a Product Problem Report?: Yes
• Operator of Device: Health Professional
• Device Expiration Date: 04/02/2022
• Device Model Number: M00567340
• Device Catalogue Number: 6734
• Device Lot Number: 0023584992
• Was Device Available for Evaluation?: Device Returned to Manufacturer
• Date Returned to Manufacturer: 03/12/2020
• Type of Report(Section G): Initial
• Initial Date Received by Manufacturer: 03/27/2020
• Initial Report FDA Received Date: 04/22/2020
• Is This a Single-Use Device that was Reprocessed and Reused on a Patient? (Y/N): No
• Patient Sequence Number: 1
• Patient Age: 54 YR