|
Date of Entry
|
Specialty Task Group Area
|
Recognition Number
|
Extent of Recognition
|
Standards Developing Organization
|
Standard Designation Number and Date
|
Standard Title (click for recognition information)
|
04/04/2016 |
Materials |
8-135 |
Complete |
ASTM |
F2392-04 (Reapproved 2015) |
Standard Test Method for Burst Strength of Surgical Sealants |
04/04/2016 |
Materials |
8-136 |
Complete |
ASTM |
F2458-05 (Reapproved 2015) |
Standard Test Method for Wound Closure Strength of Tissue Adhesives and Sealants |
04/04/2016 |
Materials |
8-200 |
Complete |
ASTM |
F2003-02 (Reapproved 2015) |
Standard Practice for Accelerated Aging of Ultra-High Molecular Weight Polyethylene after Gamma Irradiation in Air |
04/04/2016 |
Materials |
8-393 |
Complete |
ASTM |
F1350-15 |
Standard Specification for Wrought 18 Chromium-14 Nickel-2.5 Molybdenum Stainless Steel Surgical Fixation Wire (UNS S31673) |
04/04/2016 |
Materials |
8-394 |
Complete |
ASTM |
F1472-14 |
Standard Specification for Wrought Titanium -6Aluminum -4Vanadium Alloy for Surgical Implant Applications (UNS R56400) |
04/04/2016 |
Materials |
8-399 |
Complete |
ASTM |
F90-14 |
Standard Specification for Wrought Cobalt-20 Chromium-15 Tungsten-10 Nickel Alloy for Surgical Implant Applications (UNS R30605) |
04/04/2016 |
Materials |
8-400 |
Complete |
ASTM |
F1854-15 |
Standard Test Method for Stereological Evaluation of Porous Coatings on Medical Implants |
04/04/2016 |
Materials |
8-401 |
Complete |
ASTM |
F2118-14 (Reapproved 2020) |
Standard Test Method for Constant Amplitude of Force Controlled Fatigue Testing of Acrylic Bone Cement Materials |
04/04/2016 |
Materials |
8-403 |
Complete |
ASTM |
D638-14 |
Standard Test Method for Tensile Properties of Plastics |
04/04/2016 |
Materials |
8-404 |
Complete |
ASTM |
E647-15 |
Standard Test Method for Measurement of Fatigue Crack Growth Rates |
04/04/2016 |
Materials |
8-405 |
Complete |
ISO |
5832-4 Third edition 2014-09-15 |
Implants for surgery -- Metallic materials -- Part 4: Cobalt-chromium-molybdenum casting alloy |
04/04/2016 |
Materials |
8-406 |
Complete |
ISO |
5832-11 Second edition 2014-09-15 |
Implants for surgery -- Metallic materials -- Part 11: Wrought titanium 6-aluminium 7-niobium alloy |
04/04/2016 |
Materials |
8-408 |
Complete |
ASTM |
F3122-14 |
Standard Guide for Evaluating Mechanical Properties of Metal Materials Made via Additive Manufacturing Processes |
04/04/2016 |
Materials |
8-409 |
Partial |
ASTM |
F2924-14 |
Standard Specification for Additive Manufacturing Titanium-6 Aluminum-4 Vanadium with Powder Bed Fusion |
04/04/2016 |
Materials |
8-413 |
Complete |
ASTM |
F2819-10 (Reapproved 2015) |
Standard Test Methods for Measurement of Straightness of Bar, Rod, Tubing and Wire to be used for Medical Devices |
04/04/2016 |
Materials |
8-415 |
Complete |
ASTM |
F2778-09 (Reapproved 2020) |
Standard Test Method for Measurement of Percent Crystallinity of Polyetheretherketone (PEEK) Polymers by Means of Specular Reflectance Fourier Transform Infrared Spectroscopy (R-FTIR) |
04/04/2016 |
Nanotechnology |
18-1 |
Complete |
ASTM |
E2490-09 (Reapproved 2021) |
Standard Guide for Measurement of Particle Size Distribution of Nanomaterials in Suspension by Photon Correlation Spectroscopy (PCS) |
04/04/2016 |
ObGyn/ Gastroenterology/ Urology |
9-110 |
Complete |
ISO |
8600-1 Fourth Edition 2015-10-15 |
Endoscopes - Medical endoscopes and endotherapy devices -- Part 1: General requirements |
04/04/2016 |
ObGyn/ Gastroenterology/ Urology |
9-113 |
Complete |
CEN |
EN 1618:1997 |
Catheters other than intravascular catheters - Test methods for common properties |
04/04/2016 |
Ophthalmic |
10-100 |
Complete |
ISO |
18259 First Edition 2014-10-01 |
Ophthalmic optics - Contact lens care products - Method to assess contact lens care products with contact lenses in a lens case, challenged with bacterial and fungal organisms |
04/04/2016 |
Orthopedic |
11-247 |
Complete |
ASTM |
F2789-10 (Reapproved 2020) |
Standard Guide for Mechanical and Functional Characterization of Nucleus Devices |
04/04/2016 |
Orthopedic |
11-299 |
Complete |
ASTM |
F2068-15 |
Standard Specification for Femoral Prostheses - Metallic Implants |
04/04/2016 |
Orthopedic |
11-301 |
Complete |
ASTM |
F2091-15 |
Standard Specification for Acetabular Prostheses |
04/04/2016 |
Orthopedic |
11-303 |
Complete |
ASTM |
F3047M-15 |
Standard Guide for High Demand Hip Simulator Wear Testing of Hard-on-hard Articulations |
04/04/2016 |
Orthopedic |
11-304 |
Complete |
ASTM |
F3107-14 |
Standard Test Method for Measuring Accuracy after Mechanical Disturbances on Reference Frames of Computer Assisted Surgery Systems |
04/04/2016 |
Physical Medicine |
16-195 |
Complete |
ISO |
7176-1 Third edition 2014-10-01 |
Wheelchairs - Part 1: Determination of static stability |
04/04/2016 |
Physical Medicine |
16-196 |
Complete |
ISO |
7176-7 First Edition 1998-05-15 |
Wheelchairs - Part 7: Measurement of seating and wheel dimensions |
04/04/2016 |
Physical Medicine |
16-197 |
Complete |
ISO |
7176-8 Second editon 2014-12-15 |
Wheelchairs - Part 8: Requirements and test methods for static, impact and fatigue strengths |
04/04/2016 |
Physical Medicine |
16-198 |
Complete |
ISO |
7176-22 Second edition 2014-09-01 |
Wheelchairs - Part 22: Set-up procedures |
04/04/2016 |
Radiology |
12-187 |
Complete |
NEMA |
MS 3-2008 (R2020) |
Determination of Image Uniformity in Diagnostic Magnetic Resonance Images |
04/04/2016 |
Radiology |
12-188 |
Complete |
NEMA |
MS-1-2008 (R2020) |
Determination of Signal-to-Noise Ratio (SNR) in Diagnostic Magnetic Resonance Imaging |
04/04/2016 |
Radiology |
12-195 |
Complete |
NEMA |
MS 6-2008 (R2014, R2020) |
Determination of Signal-to-Noise Ratio and Image Uniformity for Single-Channel Non-Volume Coils in Diagnostic MR Imaging |
04/04/2016 |
Radiology |
12-196 |
Complete |
NEMA |
MS 2-2008 (R2020) |
Determination of Two-Dimensional Geometric Distortion in Diagnostic Magnetic Resonance Images |
04/04/2016 |
Radiology |
12-288 |
Complete |
NEMA |
MS 9-2008 (R2020) |
Standards Publication Characterization of Phased Array Coils for Diagnostic Magnetic Resonance Images |
04/04/2016 |
Software/ Informatics |
13-81 |
Complete |
IEEE |
Std 11073-10419:2015 |
Health informatics - Personal health device communication - Part 10419: Device Specialization - Insulin Pump |
04/04/2016 |
Sterility |
14-277 |
Complete |
ANSI AAMI ISO |
TIR 17665-2:2009 |
Sterilization of health care products - Moist heat - Part 2: Guidance on the application of ISO ANSI/AAMI/ISO 17665-1 |
ISO |
TS 17665-2 First edition 2009-01-15 |
Sterilization of health care products - Moist heat - Part 2: Guidance on the application of ISO 17665-1 |
04/04/2016 |
Sterility |
14-333 |
Complete |
ISO |
17665-1 First edition 2006-08-15 |
Sterilization of health care products - Moist heat - Part 1: Requirements for the development, validation and routine control of a sterilization process for medical devices |
ANSI AAMI ISO |
17665-1:2006/(R)2013 |
Sterilization of health care products -- Moist heat -- Part 1: Requirements for the development, validation, and routine control of a sterilization process for medical devices |
04/04/2016 |
Sterility |
14-337 |
Complete |
ISO |
14937 Second edition 2009-10-15 |
Sterilization of health care products - General requirements for characterization of a sterilizing agent and the development, validation and routine control of a sterilization process for medical devices |
ANSI AAMI ISO |
14937:2009/(R)2013 |
Sterilization of health care products - General requirements for characterization of a sterilizing agent and the development, validation, and routine control of a sterilization process for medical devices |
04/04/2016 |
Sterility |
14-340 |
Complete |
ISO |
20857 First edition 2010-08-15 |
Sterilization of health care products - Dry heat - Requirements for the development, validation and routine control of a sterilization process for medical devices |
ANSI AAMI ISO |
20857:2010/(R)2015 |
(Revision of ANSI/AAMI/ST63:2002) Sterilization of health care products - Dry heat - Requirements for the development, validation and routine control of a sterilization process for medical devices |
04/04/2016 |
Tissue Engineering |
15-24 |
Complete |
ASTM |
F2721-09 (Reapproved 2014) |
Standard Guide for Pre-clinical in vivo Evaluation in Critical Size Segmental Bone Defects |
04/04/2016 |
Tissue Engineering |
15-43 |
Complete |
ASTM |
F2791-15 |
Standard Guide for Assessment of Surface Texture of Non-Porous Biomaterials in Two Dimensions |
04/04/2016 |
Tissue Engineering |
15-44 |
Partial |
ASTM |
F2529-13 |
Standard Guide for in vivo Evaluation of Osteoinductive Potential for Materials Containing Demineralized Bone (DBM) |
06/15/2016 |
Cardiovascular |
3-132 |
Complete |
ISO |
27185 First edition 2012-02-15 |
Cardiac Rhythm Management Devices - Symbols to be Used With Cardiac Rhythm Management Device Labels, and Information to be Supplied - General Requirements |
ANSI AAMI ISO |
27185:2012 |
Cardiac Rhythm Management Devices -- Symbols to be Used With Cardiac Rhythm Managment Device Labels, and Information to be Supplied -- General Requirements |
06/15/2016 |
General I (QS/ RM) |
5-102 |
Complete |
IEC |
60417:2002 DB |
Graphical symbols for use on equipment |
06/27/2016 |
Cardiovascular |
3-143 |
Partial |
ISO |
12417 First edition 2015-10-01 |
Cardiovascular implants and extracorporeal systems - Vascular device-drug combination products |
06/27/2016 |
Dental/ ENT |
4-202 |
Complete |
ANSI ADA |
Standard No. 58-2010 (R2015) |
Root Canal Files, Type H (Hedstrom) |
06/27/2016 |
Dental/ ENT |
4-227 |
Complete |
ISO |
22674 Second edition 2016-01-15 |
Dentistry - Metallic materials for fixed and removable restorations and appliances |
ANSI ADA |
Standard No. 134-2018 |
Metallic Materials for Fixed and Removable Restorations and Appliances |
06/27/2016 |
Dental/ ENT |
4-228 |
Complete |
ANSI ASA |
S3.20-2015 (Reaffirmed 2020) |
American National Standard Bioacoustical Terminology |
06/27/2016 |
General I (QS/ RM) |
5-57 |
Partial |
ANSI AAMI |
HE75:2009/(R)2018 |
Human factors engineering - Design of medical devices |
06/27/2016 |
General I (QS/ RM) |
5-108 |
Complete |
ISO |
80369-6 First Edition 2016-03-15 |
Small bore connectors for liquids and gases in healthcare applications - Part 6: Connectors for neuraxial applications. |