ASCA-Accredited Testing Laboratories

This page lists ASCA-accredited testing laboratories and their respective scopes of accreditation.

Notes:

Testing laboratories who wish to participate in ASCA should demonstrate that they have been accredited by an ASCA-recognized accreditation body to the currently FDA-recognized versions of the standards and test methods included in ASCA. Please check the Recognized Consensus Standards database for the currently recognized versions.

Some FDA-recognized consensus standards included in ASCA have an identical U.S. adoption (for example, IEC 60601-2-47, ANSI/AAMI/IEC 60601-2-47). If a testing laboratory has an international (e.g., IEC, ISO) version of a standard in their scope of ASCA Accreditation, any identical US adoption associated with the FDA Recognition number is also considered included in the testing laboratory's scope. For example, if IEC 60601-2-47 with FDA Recognition number 3-155 is listed in a testing laboratory's scope of ASCA Accreditation, testing to the associated ANSI AAMI IEC version is also acceptable even if it is not explicitly listed in the testing lab's scope.

Some FDA-recognized international consensus standards (e.g., IEC, ISO) included in ASCA are recognized specifically with U.S. national differences applied (e.g., IEC 60601-1, IEC 61010-1). When U.S. national differences are applied to the international versions, they are considered equivalent to the corresponding U.S. adoptions of those standards (e.g., ANSI AAMI ES60601-1, ANSI UL 61010-1). For testing laboratories listed below with such standards in their scope, both the US adoptions and the international versions of the standards are considered as part of their scope of ASCA Accreditation.

For a list of testing laboratories with Withdrawn ASCA Accreditation, see here

Learn more...

Arrow buttons can be used to sort the table by each column heading.

510(k)

DeNovo

Registration & Listing

Radiation-Emitting Products

Test Lab: TUV SUD America, Inc. - San Diego [TL-17]

Accreditation Status: Accreditation Granted - Start Date: 04/12/2021

Accreditation Body Organization Name: A2LA

Test Lab Primary Contact: William Elliott, William.Elliott@tuvsud.com, 10040 Mesa Rim Rd San Diego CA US 92121

Scope of ASCA Accreditation

Return to list of Testing Labs

Status	Status Date	Category	Biocompatibility Test Method	Recognition Number	Standards Development Organization	Standard Designation Number and Date	Title	Exclusions
Accreditation Granted	04/12/2021	Basic safety and essential performance		1-140	ISO	80601-2-55 Second edition 2018-02	Medical electrical equipment - Part 2-55: Particular requirements for the basic safety and essential performance of respiratory gas monitors	Excluding the following measurements: Abrasion Resistance Test, Steel Pin, Concentration of Flammable Vapors, Softening Temperature (ISO 306), Ultrasonic Pressure, Capacitors and RC-units, Insulated Winding Wires, Methylated Spirits and Pressure Apparatus, Coated Printed Circuit Boards Test Apparatus (IEC 60664-3), CRT Strength, Ageing Test Apparatus for Elastomeric Parts, Partial Discharge Test (§2.10.5.4), UV Radiation, Bottom Fire Enclosure (hot flaming oil), Resistance to Ultra-violet Radiation, Resistance to Heat and Fire - ISO 9772 Test Apparatus, Microwave Radiation, AC Power Cords, (IEC 60227 flex), Oxygen Bomb, Endurance Test Apparatus (IEC 60384-14), Test Apparatus for Flammable Refrigerants, AP APG Tests (§ 37, 39, 41), ¿20 *Autoclave Tests (§ 44)¿, EO Sterilisation (§ 44), Gamma Sterilisation (§ 44), Power Measurements, ECG Performance, IR Irradiance, Vibration Test, Resistance to Corrosion, Water-borne Contaminants ¿ Salt Spray Test, Mechanical Strength (§ 21), Water-sulfur Dioxide Test, Compression Test, & Oil Immersion Test.
Accreditation Granted	05/14/2025	Basic safety and essential performance		1-146	ISO	80601-2-12 Second edition 2020-02	Medical electrical equipment - Part 2-12: Particular requirements for basic safety and essential performance of critical care ventilators
Accreditation Granted	05/14/2025	Basic safety and essential performance		1-184	ISO	80601-2-55 Second edition 2018-02 [Including AMD1:2023]	Medical electrical equipment - Part 2-55: Particular requirements for the basic safety and essential performance of respiratory gas monitor [Including Amendment 1 (2023)].
Accreditation Granted	05/14/2025	Basic safety and essential performance		1-187	ISO	80601-2-12 Third edition 2023-11	Medical electrical equipment - Part 2-12: Particular requirements for basic safety and essential performance of critical care ventilators
Accreditation Granted	04/12/2021	Basic safety and essential performance		1-87	IEC	60601-2-23 Edition 3.0 2011-02	Medical electrical equipment - Part 2-23: Particular requirements for the basic safety and essential performance of transcutaneous partial pressure monitoring equipment	Excluding the following measurements: Abrasion Resistance Test, Steel Pin, Concentration of Flammable Vapors, Softening Temperature (ISO 306), Ultrasonic Pressure, Capacitors and RC-units, Insulated Winding Wires, Methylated Spirits and Pressure Apparatus, Coated Printed Circuit Boards Test Apparatus (IEC 60664-3), CRT Strength, Ageing Test Apparatus for Elastomeric Parts, Partial Discharge Test (§2.10.5.4), UV Radiation, Bottom Fire Enclosure (hot flaming oil), Resistance to Ultra-violet Radiation, Resistance to Heat and Fire - ISO 9772 Test Apparatus, Microwave Radiation, AC Power Cords, (IEC 60227 flex), Oxygen Bomb, Endurance Test Apparatus (IEC 60384-14), Test Apparatus for Flammable Refrigerants, AP APG Tests (§ 37, 39, 41), ¿20 *Autoclave Tests (§ 44)¿, EO Sterilisation (§ 44), Gamma Sterilisation (§ 44), Power Measurements, ECG Performance, IR Irradiance, Vibration Test, Resistance to Corrosion, Water-borne Contaminants ¿ Salt Spray Test, Mechanical Strength (§ 21), Water-sulfur Dioxide Test, Compression Test, & Oil Immersion Test.
Accreditation Granted	04/12/2021	Basic safety and essential performance		12-211	IEC	60601-2-29 Edition 3.0 2008-06	Medical electrical equipment - Part 2-29: Particular requirements for the basic safety and essential performance of radiotherapy simulators	Excluding the following measurements: Abrasion Resistance Test, Steel Pin, Concentration of Flammable Vapors, Softening Temperature (ISO 306), Ultrasonic Pressure, Capacitors and RC-units, Insulated Winding Wires, Methylated Spirits and Pressure Apparatus, Coated Printed Circuit Boards Test Apparatus (IEC 60664-3), CRT Strength, Ageing Test Apparatus for Elastomeric Parts, Partial Discharge Test (§2.10.5.4), UV Radiation, Bottom Fire Enclosure (hot flaming oil), Resistance to Ultra-violet Radiation, Resistance to Heat and Fire - ISO 9772 Test Apparatus, Microwave Radiation, AC Power Cords, (IEC 60227 flex), Oxygen Bomb, Endurance Test Apparatus (IEC 60384-14), Test Apparatus for Flammable Refrigerants, AP APG Tests (§ 37, 39, 41), ¿20 *Autoclave Tests (§ 44)¿, EO Sterilisation (§ 44), Gamma Sterilisation (§ 44), Power Measurements, ECG Performance, IR Irradiance, Vibration Test, Resistance to Corrosion, Water-borne Contaminants ¿ Salt Spray Test, Mechanical Strength (§ 21), Water-sulfur Dioxide Test, Compression Test, & Oil Immersion Test.
Accreditation Granted	04/12/2021	Basic safety and essential performance		12-268	IEC	60601-2-22 Edition 3.1 2012-10	Medical electrical equipment - Part 2-22: Particular requirements for basic safety and essential performance of surgical, cosmetic, therapeutic and diagnostic laser equipment	Excluding the following measurements: Abrasion Resistance Test, Steel Pin, Concentration of Flammable Vapors, Softening Temperature (ISO 306), Ultrasonic Pressure, Capacitors and RC-units, Insulated Winding Wires, Methylated Spirits and Pressure Apparatus, Coated Printed Circuit Boards Test Apparatus (IEC 60664-3), CRT Strength, Ageing Test Apparatus for Elastomeric Parts, Partial Discharge Test (§2.10.5.4), UV Radiation, Bottom Fire Enclosure (hot flaming oil), Resistance to Ultra-violet Radiation, Resistance to Heat and Fire - ISO 9772 Test Apparatus, Microwave Radiation, AC Power Cords, (IEC 60227 flex), Oxygen Bomb, Endurance Test Apparatus (IEC 60384-14), Test Apparatus for Flammable Refrigerants, AP APG Tests (§ 37, 39, 41), ¿20 *Autoclave Tests (§ 44)¿, EO Sterilisation (§ 44), Gamma Sterilisation (§ 44), Power Measurements, ECG Performance, IR Irradiance, Vibration Test, Resistance to Corrosion, Water-borne Contaminants ¿ Salt Spray Test, Mechanical Strength (§ 21), Water-sulfur Dioxide Test, Compression Test, & Oil Immersion Test.
Accreditation Granted	05/14/2025	Basic safety and essential performance		12-356	IEC	60601-2-22 Edition 4.0 2019-11	Medical electrical equipment - Part 2-22: Particular requirements for basic safety and essential performance of surgical, cosmetic, therapeutic and diagnostic laser equipment
Accreditation Granted	04/12/2021	Basic safety and essential performance		17-16	IEC	60601-2-10 Edition 2.1 2016-04	Medical electrical equipment - Part 2-10: Particular requirements for the basic safety and essential performance of nerve and muscle stimulators	Excluding the following measurements: Abrasion Resistance Test, Steel Pin, Concentration of Flammable Vapors, Softening Temperature (ISO 306), Ultrasonic Pressure, Capacitors and RC-units, Insulated Winding Wires, Methylated Spirits and Pressure Apparatus, Coated Printed Circuit Boards Test Apparatus (IEC 60664-3), CRT Strength, Ageing Test Apparatus for Elastomeric Parts, Partial Discharge Test (§2.10.5.4), UV Radiation, Bottom Fire Enclosure (hot flaming oil), Resistance to Ultra-violet Radiation, Resistance to Heat and Fire - ISO 9772 Test Apparatus, Microwave Radiation, AC Power Cords, (IEC 60227 flex), Oxygen Bomb, Endurance Test Apparatus (IEC 60384-14), Test Apparatus for Flammable Refrigerants, AP APG Tests (§ 37, 39, 41), ¿20 *Autoclave Tests (§ 44)¿, EO Sterilisation (§ 44), Gamma Sterilisation (§ 44), Power Measurements, ECG Performance, IR Irradiance, Vibration Test, Resistance to Corrosion, Water-borne Contaminants ¿ Salt Spray Test, Mechanical Strength (§ 21), Water-sulfur Dioxide Test, Compression Test, & Oil Immersion Test.
Accreditation Granted	04/12/2021	Basic safety and essential performance		19-34	IEC	61010-1 Edition 3.1 2017-01 CONSOLIDATED VERSION	Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 1: General requirements [Including: Corrigendum 1 (2019)] - Note: This standard is recognized with relevant US national differences applied, see reference #1 in Relevant FDA Guidance and/or Supportive Publication section	Excluding the following measurements: Abrasion Resistance Test, Steel Pin, Concentration of Flammable Vapors, Softening Temperature (ISO 306), Ultrasonic Pressure, Capacitors and RC-units, Insulated Winding Wires, Methylated Spirits and Pressure Apparatus, Coated Printed Circuit Boards Test Apparatus (IEC 60664-3), CRT Strength, Ageing Test Apparatus for Elastomeric Parts, Partial Discharge Test (§2.10.5.4), UV Radiation, Bottom Fire Enclosure (hot flaming oil), Resistance to Ultra-violet Radiation, Resistance to Heat and Fire - ISO 9772 Test Apparatus, Microwave Radiation, AC Power Cords, (IEC 60227 flex), Oxygen Bomb, Endurance Test Apparatus (IEC 60384-14), Test Apparatus for Flammable Refrigerants, AP APG Tests (§ 37, 39, 41), ¿20 *Autoclave Tests (§ 44)¿, EO Sterilisation (§ 44), Gamma Sterilisation (§ 44), Power Measurements, ECG Performance, IR Irradiance, Vibration Test, Resistance to Corrosion, Water-borne Contaminants ¿ Salt Spray Test, Mechanical Strength (§ 21), Water-sulfur Dioxide Test, Compression Test, & Oil Immersion Test.
Accreditation Granted	04/12/2021	Basic safety and essential performance		19-36	IEC	60601-1-2 Edition 4.1 2020-09 CONSOLIDATED VERSION	Medical electrical equipment - Part 1-2: General requirements for basic safety and essential performance - Collateral Standard: Electromagnetic disturbances - Requirements and tests	Excluding the following measurements: Abrasion Resistance Test, Steel Pin, Concentration of Flammable Vapors, Softening Temperature (ISO 306), Ultrasonic Pressure, Capacitors and RC-units, Insulated Winding Wires, Methylated Spirits and Pressure Apparatus, Coated Printed Circuit Boards Test Apparatus (IEC 60664-3), CRT Strength, Ageing Test Apparatus for Elastomeric Parts, Partial Discharge Test (§2.10.5.4), UV Radiation, Bottom Fire Enclosure (hot flaming oil), Resistance to Ultra-violet Radiation, Resistance to Heat and Fire - ISO 9772 Test Apparatus, Microwave Radiation, AC Power Cords, (IEC 60227 flex), Oxygen Bomb, Endurance Test Apparatus (IEC 60384-14), Test Apparatus for Flammable Refrigerants, AP APG Tests (§ 37, 39, 41), ¿20 *Autoclave Tests (§ 44)¿, EO Sterilisation (§ 44), Gamma Sterilisation (§ 44), Power Measurements, ECG Performance, IR Irradiance, Vibration Test, Resistance to Corrosion, Water-borne Contaminants ¿ Salt Spray Test, Mechanical Strength (§ 21), Water-sulfur Dioxide Test, Compression Test, & Oil Immersion Test.
Accreditation Granted	04/12/2021	Basic safety and essential performance		19-37	IEC	60601-1-10 Edition 1.2 2020-07 CONSOLIDATED VERSION	Medical electrical equipment - Part 1-10: General requirements for basic safety and essential performance - Collateral Standard: Requirements for the development of physiologic closed-loop controllers	Excluding the following measurements: Abrasion Resistance Test, Steel Pin, Concentration of Flammable Vapors, Softening Temperature (ISO 306), Ultrasonic Pressure, Capacitors and RC-units, Insulated Winding Wires, Methylated Spirits and Pressure Apparatus, Coated Printed Circuit Boards Test Apparatus (IEC 60664-3), CRT Strength, Ageing Test Apparatus for Elastomeric Parts, Partial Discharge Test (§2.10.5.4), UV Radiation, Bottom Fire Enclosure (hot flaming oil), Resistance to Ultra-violet Radiation, Resistance to Heat and Fire - ISO 9772 Test Apparatus, Microwave Radiation, AC Power Cords, (IEC 60227 flex), Oxygen Bomb, Endurance Test Apparatus (IEC 60384-14), Test Apparatus for Flammable Refrigerants, AP APG Tests (§ 37, 39, 41), ¿20 *Autoclave Tests (§ 44)¿, EO Sterilisation (§ 44), Gamma Sterilisation (§ 44), Power Measurements, ECG Performance, IR Irradiance, Vibration Test, Resistance to Corrosion, Water-borne Contaminants ¿ Salt Spray Test, Mechanical Strength (§ 21), Water-sulfur Dioxide Test, Compression Test, & Oil Immersion Test.
Accreditation Granted	04/12/2021	Basic safety and essential performance		19-38	IEC	60601-1-11 Edition 2.1 2020-07 CONSOLIDATED VERSION	Medical electrical equipment - Part 1-11: General requirements for basic safety and essential performance - Collateral Standard: Requirements for medical electrical equipment and medical electrical systems used in the home healthcare environment	Excluding the following measurements: Abrasion Resistance Test, Steel Pin, Concentration of Flammable Vapors, Softening Temperature (ISO 306), Ultrasonic Pressure, Capacitors and RC-units, Insulated Winding Wires, Methylated Spirits and Pressure Apparatus, Coated Printed Circuit Boards Test Apparatus (IEC 60664-3), CRT Strength, Ageing Test Apparatus for Elastomeric Parts, Partial Discharge Test (§2.10.5.4), UV Radiation, Bottom Fire Enclosure (hot flaming oil), Resistance to Ultra-violet Radiation, Resistance to Heat and Fire - ISO 9772 Test Apparatus, Microwave Radiation, AC Power Cords, (IEC 60227 flex), Oxygen Bomb, Endurance Test Apparatus (IEC 60384-14), Test Apparatus for Flammable Refrigerants, AP APG Tests (§ 37, 39, 41), ¿20 *Autoclave Tests (§ 44)¿, EO Sterilisation (§ 44), Gamma Sterilisation (§ 44), Power Measurements, ECG Performance, IR Irradiance, Vibration Test, Resistance to Corrosion, Water-borne Contaminants ¿ Salt Spray Test, Mechanical Strength (§ 21), Water-sulfur Dioxide Test, Compression Test, & Oil Immersion Test.
Accreditation Granted	04/12/2021	Basic safety and essential performance		19-39	IEC	60601-1-12 Edition 1.1 2020-07 CONSOLIDATED VERSION	Medical electrical equipment - Part 1-12: General requirements for basic safety and essential performance - Collateral Standard: Requirements for medical electrical equipment and medical electrical systems intended for use in the emergency medical services environment	Excluding the following measurements: Abrasion Resistance Test, Steel Pin, Concentration of Flammable Vapors, Softening Temperature (ISO 306), Ultrasonic Pressure, Capacitors and RC-units, Insulated Winding Wires, Methylated Spirits and Pressure Apparatus, Coated Printed Circuit Boards Test Apparatus (IEC 60664-3), CRT Strength, Ageing Test Apparatus for Elastomeric Parts, Partial Discharge Test (§2.10.5.4), UV Radiation, Bottom Fire Enclosure (hot flaming oil), Resistance to Ultra-violet Radiation, Resistance to Heat and Fire - ISO 9772 Test Apparatus, Microwave Radiation, AC Power Cords, (IEC 60227 flex), Oxygen Bomb, Endurance Test Apparatus (IEC 60384-14), Test Apparatus for Flammable Refrigerants, AP APG Tests (§ 37, 39, 41), ¿20 *Autoclave Tests (§ 44)¿, EO Sterilisation (§ 44), Gamma Sterilisation (§ 44), Power Measurements, ECG Performance, IR Irradiance, Vibration Test, Resistance to Corrosion, Water-borne Contaminants ¿ Salt Spray Test, Mechanical Strength (§ 21), Water-sulfur Dioxide Test, Compression Test, & Oil Immersion Test.
Accreditation Granted	05/14/2025	Basic safety and essential performance		19-41	ANSI, UL	61010-1 3rd Ed, dated May 12, 2012 with revision through July 19, 2019	Standard for Safety for Electrical Equipment For Measurement, Control and Laboratory Use; Part 1: General Requirements
Accreditation Granted	05/14/2025	Basic safety and essential performance		19-49	IEC	60601-1 Edition 3.2 2020-08 CONSOLIDATED VERSION	Medical electrical equipment - Part 1: General requirements for basic safety and essential performance - Note: This standard is recognized with relevant US national differences applied, see references #1 and #2 in the Relevant FDA Guidance and/or Supportive Publication section below.
Accreditation Granted	05/14/2025	Basic safety and essential performance		19-50	IEC	TS 60601-4-2 Edition 1.0 2024-03	Medical electrical equipment - Part 4-2: Guidance and interpretation - Electromagnetic immunity: performance of medical electrical equipment and medical electrical systems
Accreditation Granted	04/12/2021	Basic safety and essential performance		3-102	IEC	60601-2-31 Edition 2.1 2011-09	Medical electrical equipment - Part 2-31: Particular requirements for the basic safety and essential performance of external cardiac pacemakers with internal power source	Excluding the following measurements: Abrasion Resistance Test, Steel Pin, Concentration of Flammable Vapors, Softening Temperature (ISO 306), Ultrasonic Pressure, Capacitors and RC-units, Insulated Winding Wires, Methylated Spirits and Pressure Apparatus, Coated Printed Circuit Boards Test Apparatus (IEC 60664-3), CRT Strength, Ageing Test Apparatus for Elastomeric Parts, Partial Discharge Test (§2.10.5.4), UV Radiation, Bottom Fire Enclosure (hot flaming oil), Resistance to Ultra-violet Radiation, Resistance to Heat and Fire - ISO 9772 Test Apparatus, Microwave Radiation, AC Power Cords, (IEC 60227 flex), Oxygen Bomb, Endurance Test Apparatus (IEC 60384-14), Test Apparatus for Flammable Refrigerants, AP APG Tests (§ 37, 39, 41), ¿20 *Autoclave Tests (§ 44)¿, EO Sterilisation (§ 44), Gamma Sterilisation (§ 44), Power Measurements, ECG Performance, IR Irradiance, Vibration Test, Resistance to Corrosion, Water-borne Contaminants ¿ Salt Spray Test, Mechanical Strength (§ 21), Water-sulfur Dioxide Test, Compression Test, & Oil Immersion Test.
Accreditation Granted	04/12/2021	Basic safety and essential performance		3-105	IEC	60601-2-25 Edition 2.0 2011-10	Medical electrical equipment - Part 2-25: Particular requirements for the basic safety and essential performance of electrocardiographs	Excluding the following measurements: Abrasion Resistance Test, Steel Pin, Concentration of Flammable Vapors, Softening Temperature (ISO 306), Ultrasonic Pressure, Capacitors and RC-units, Insulated Winding Wires, Methylated Spirits and Pressure Apparatus, Coated Printed Circuit Boards Test Apparatus (IEC 60664-3), CRT Strength, Ageing Test Apparatus for Elastomeric Parts, Partial Discharge Test (§2.10.5.4), UV Radiation, Bottom Fire Enclosure (hot flaming oil), Resistance to Ultra-violet Radiation, Resistance to Heat and Fire - ISO 9772 Test Apparatus, Microwave Radiation, AC Power Cords, (IEC 60227 flex), Oxygen Bomb, Endurance Test Apparatus (IEC 60384-14), Test Apparatus for Flammable Refrigerants, AP APG Tests (§ 37, 39, 41), ¿20 *Autoclave Tests (§ 44)¿, EO Sterilisation (§ 44), Gamma Sterilisation (§ 44), Power Measurements, ECG Performance, IR Irradiance, Vibration Test, Resistance to Corrosion, Water-borne Contaminants ¿ Salt Spray Test, Mechanical Strength (§ 21), Water-sulfur Dioxide Test, Compression Test, & Oil Immersion Test.
Accreditation Granted	04/12/2021	Basic safety and essential performance		3-115	IEC	60601-2-34 Edition 3.0 2011-05	Medical electrical equipment - Part 2-34: Particular requirements for the basic safety, including essential performance, of invasive blood pressure monitoring equipment	Excluding the following measurements: Abrasion Resistance Test, Steel Pin, Concentration of Flammable Vapors, Softening Temperature (ISO 306), Ultrasonic Pressure, Capacitors and RC-units, Insulated Winding Wires, Methylated Spirits and Pressure Apparatus, Coated Printed Circuit Boards Test Apparatus (IEC 60664-3), CRT Strength, Ageing Test Apparatus for Elastomeric Parts, Partial Discharge Test (§2.10.5.4), UV Radiation, Bottom Fire Enclosure (hot flaming oil), Resistance to Ultra-violet Radiation, Resistance to Heat and Fire - ISO 9772 Test Apparatus, Microwave Radiation, AC Power Cords, (IEC 60227 flex), Oxygen Bomb, Endurance Test Apparatus (IEC 60384-14), Test Apparatus for Flammable Refrigerants, AP APG Tests (§ 37, 39, 41), ¿20 *Autoclave Tests (§ 44)¿, EO Sterilisation (§ 44), Gamma Sterilisation (§ 44), Power Measurements, ECG Performance, IR Irradiance, Vibration Test, Resistance to Corrosion, Water-borne Contaminants ¿ Salt Spray Test, Mechanical Strength (§ 21), Water-sulfur Dioxide Test, Compression Test, & Oil Immersion Test.
Accreditation Granted	04/12/2021	Basic safety and essential performance		3-123	IEC	80601-2-30: Edition 2.0 2018-03	Medical electrical equipment - Part 2-30: Particular requirements for the basic safety and essential performance of automated non-invasive sphygmomanometers	Excluding the following measurements: Abrasion Resistance Test, Steel Pin, Concentration of Flammable Vapors, Softening Temperature (ISO 306), Ultrasonic Pressure, Capacitors and RC-units, Insulated Winding Wires, Methylated Spirits and Pressure Apparatus, Coated Printed Circuit Boards Test Apparatus (IEC 60664-3), CRT Strength, Ageing Test Apparatus for Elastomeric Parts, Partial Discharge Test (§2.10.5.4), UV Radiation, Bottom Fire Enclosure (hot flaming oil), Resistance to Ultra-violet Radiation, Resistance to Heat and Fire - ISO 9772 Test Apparatus, Microwave Radiation, AC Power Cords, (IEC 60227 flex), Oxygen Bomb, Endurance Test Apparatus (IEC 60384-14), Test Apparatus for Flammable Refrigerants, AP APG Tests (§ 37, 39, 41), ¿20 *Autoclave Tests (§ 44)¿, EO Sterilisation (§ 44), Gamma Sterilisation (§ 44), Power Measurements, ECG Performance, IR Irradiance, Vibration Test, Resistance to Corrosion, Water-borne Contaminants ¿ Salt Spray Test, Mechanical Strength (§ 21), Water-sulfur Dioxide Test, Compression Test, & Oil Immersion Test.
Accreditation Granted	04/12/2021	Basic safety and essential performance		3-126	IEC	60601-2-27 Edition 3.0 2011-03	Medical electrical equipment - Part 2-27: Particular requirements for the basic safety and essential performance of electrocardiographic monitoring equipment [Including: Corrigendum 1 (2012)]	Excluding the following measurements: Abrasion Resistance Test, Steel Pin, Concentration of Flammable Vapors, Softening Temperature (ISO 306), Ultrasonic Pressure, Capacitors and RC-units, Insulated Winding Wires, Methylated Spirits and Pressure Apparatus, Coated Printed Circuit Boards Test Apparatus (IEC 60664-3), CRT Strength, Ageing Test Apparatus for Elastomeric Parts, Partial Discharge Test (§2.10.5.4), UV Radiation, Bottom Fire Enclosure (hot flaming oil), Resistance to Ultra-violet Radiation, Resistance to Heat and Fire - ISO 9772 Test Apparatus, Microwave Radiation, AC Power Cords, (IEC 60227 flex), Oxygen Bomb, Endurance Test Apparatus (IEC 60384-14), Test Apparatus for Flammable Refrigerants, AP APG Tests (§ 37, 39, 41), ¿20 *Autoclave Tests (§ 44)¿, EO Sterilisation (§ 44), Gamma Sterilisation (§ 44), Power Measurements, ECG Performance, IR Irradiance, Vibration Test, Resistance to Corrosion, Water-borne Contaminants ¿ Salt Spray Test, Mechanical Strength (§ 21), Water-sulfur Dioxide Test, Compression Test, & Oil Immersion Test.
Accreditation Granted	04/12/2021	Basic safety and essential performance		3-155	IEC	60601-2-47 Edition 2.0 2012-02	Medical electrical equipment - Part 2-47: Particular requirements for the basic safety and essential performanceof ambulatory electrocardiographic systems	Excluding the following measurements: Abrasion Resistance Test, Steel Pin, Concentration of Flammable Vapors, Softening Temperature (ISO 306), Ultrasonic Pressure, Capacitors and RC-units, Insulated Winding Wires, Methylated Spirits and Pressure Apparatus, Coated Printed Circuit Boards Test Apparatus (IEC 60664-3), CRT Strength, Ageing Test Apparatus for Elastomeric Parts, Partial Discharge Test (§2.10.5.4), UV Radiation, Bottom Fire Enclosure (hot flaming oil), Resistance to Ultra-violet Radiation, Resistance to Heat and Fire - ISO 9772 Test Apparatus, Microwave Radiation, AC Power Cords, (IEC 60227 flex), Oxygen Bomb, Endurance Test Apparatus (IEC 60384-14), Test Apparatus for Flammable Refrigerants, AP APG Tests (§ 37, 39, 41), ¿20 *Autoclave Tests (§ 44)¿, EO Sterilisation (§ 44), Gamma Sterilisation (§ 44), Power Measurements, ECG Performance, IR Irradiance, Vibration Test, Resistance to Corrosion, Water-borne Contaminants ¿ Salt Spray Test, Mechanical Strength (§ 21), Water-sulfur Dioxide Test, Compression Test, & Oil Immersion Test.
Accreditation Granted	04/12/2021	Basic safety and essential performance		4-262	IEC	80601-2-60 Edition 2.0 2019-06	Medical electrical equipment - Part 2-60: Particular requirements for the basic safety and essential performance of dental equipment	Excluding the following measurements: Abrasion Resistance Test, Steel Pin, Concentration of Flammable Vapors, Softening Temperature (ISO 306), Ultrasonic Pressure, Capacitors and RC-units, Insulated Winding Wires, Methylated Spirits and Pressure Apparatus, Coated Printed Circuit Boards Test Apparatus (IEC 60664-3), CRT Strength, Ageing Test Apparatus for Elastomeric Parts, Partial Discharge Test (§2.10.5.4), UV Radiation, Bottom Fire Enclosure (hot flaming oil), Resistance to Ultra-violet Radiation, Resistance to Heat and Fire - ISO 9772 Test Apparatus, Microwave Radiation, AC Power Cords, (IEC 60227 flex), Oxygen Bomb, Endurance Test Apparatus (IEC 60384-14), Test Apparatus for Flammable Refrigerants, AP APG Tests (§ 37, 39, 41), ¿20 *Autoclave Tests (§ 44)¿, EO Sterilisation (§ 44), Gamma Sterilisation (§ 44), Power Measurements, ECG Performance, IR Irradiance, Vibration Test, Resistance to Corrosion, Water-borne Contaminants ¿ Salt Spray Test, Mechanical Strength (§ 21), Water-sulfur Dioxide Test, Compression Test, & Oil Immersion Test.
Accreditation Granted	04/12/2021	Basic safety and essential performance		5-131	IEC	60601-1-8 Edition 2.2 2020-07 CONSOLIDATED VERSION	Medical electrical equipment - Part 1-8: General requirements for basic safety and essential performance - Collateral Standard: General requirements, tests and guidance for alarm systems in medical electrical equipment and medical electrical systems	Excluding the following measurements: Abrasion Resistance Test, Steel Pin, Concentration of Flammable Vapors, Softening Temperature (ISO 306), Ultrasonic Pressure, Capacitors and RC-units, Insulated Winding Wires, Methylated Spirits and Pressure Apparatus, Coated Printed Circuit Boards Test Apparatus (IEC 60664-3), CRT Strength, Ageing Test Apparatus for Elastomeric Parts, Partial Discharge Test (§2.10.5.4), UV Radiation, Bottom Fire Enclosure (hot flaming oil), Resistance to Ultra-violet Radiation, Resistance to Heat and Fire - ISO 9772 Test Apparatus, Microwave Radiation, AC Power Cords, (IEC 60227 flex), Oxygen Bomb, Endurance Test Apparatus (IEC 60384-14), Test Apparatus for Flammable Refrigerants, AP APG Tests (§ 37, 39, 41), ¿20 *Autoclave Tests (§ 44)¿, EO Sterilisation (§ 44), Gamma Sterilisation (§ 44), Power Measurements, ECG Performance, IR Irradiance, Vibration Test, Resistance to Corrosion, Water-borne Contaminants ¿ Salt Spray Test, Mechanical Strength (§ 21), Water-sulfur Dioxide Test, Compression Test, & Oil Immersion Test.
Accreditation Granted	04/12/2021	Basic safety and essential performance		5-132	IEC	60601-1-6 Edition 3.2 2020-07 CONSOLIDATED VERSION	Medical electrical equipment - Part 1-6: General requirements for basic safety and essential performance - Collateral standard: Usability	Excluding the following measurements: Abrasion Resistance Test, Steel Pin, Concentration of Flammable Vapors, Softening Temperature (ISO 306), Ultrasonic Pressure, Capacitors and RC-units, Insulated Winding Wires, Methylated Spirits and Pressure Apparatus, Coated Printed Circuit Boards Test Apparatus (IEC 60664-3), CRT Strength, Ageing Test Apparatus for Elastomeric Parts, Partial Discharge Test (§2.10.5.4), UV Radiation, Bottom Fire Enclosure (hot flaming oil), Resistance to Ultra-violet Radiation, Resistance to Heat and Fire - ISO 9772 Test Apparatus, Microwave Radiation, AC Power Cords, (IEC 60227 flex), Oxygen Bomb, Endurance Test Apparatus (IEC 60384-14), Test Apparatus for Flammable Refrigerants, AP APG Tests (§ 37, 39, 41), ¿20 *Autoclave Tests (§ 44)¿, EO Sterilisation (§ 44), Gamma Sterilisation (§ 44), Power Measurements, ECG Performance, IR Irradiance, Vibration Test, Resistance to Corrosion, Water-borne Contaminants ¿ Salt Spray Test, Mechanical Strength (§ 21), Water-sulfur Dioxide Test, Compression Test, & Oil Immersion Test.
Accreditation Granted	04/12/2021	Basic safety and essential performance		6-389	IEC	60601-2-2 Edition 6.0 2017-03	Medical electrical equipment - Part 2-2: Particular requirements for the basic safety and essential performance of high frequency surgical equipment and high frequency surgical accessories	Excluding the following measurements: Abrasion Resistance Test, Steel Pin, Concentration of Flammable Vapors, Softening Temperature (ISO 306), Ultrasonic Pressure, Capacitors and RC-units, Insulated Winding Wires, Methylated Spirits and Pressure Apparatus, Coated Printed Circuit Boards Test Apparatus (IEC 60664-3), CRT Strength, Ageing Test Apparatus for Elastomeric Parts, Partial Discharge Test (§2.10.5.4), UV Radiation, Bottom Fire Enclosure (hot flaming oil), Resistance to Ultra-violet Radiation, Resistance to Heat and Fire - ISO 9772 Test Apparatus, Microwave Radiation, AC Power Cords, (IEC 60227 flex), Oxygen Bomb, Endurance Test Apparatus (IEC 60384-14), Test Apparatus for Flammable Refrigerants, AP APG Tests (§ 37, 39, 41), ¿20 *Autoclave Tests (§ 44)¿, EO Sterilisation (§ 44), Gamma Sterilisation (§ 44), Power Measurements, ECG Performance, IR Irradiance, Vibration Test, Resistance to Corrosion, Water-borne Contaminants ¿ Salt Spray Test, Mechanical Strength (§ 21), Water-sulfur Dioxide Test, Compression Test, & Oil Immersion Test.
Accreditation Granted	04/12/2021	Basic safety and essential performance		6-421	ISO	80601-2-56 Second edition 2017-03 [Including AMD1:2018]	Medical electrical equipment - Part 2-56: Particular requirements for basic safety and essential performance of clinical thermometers for body temperature measurement. [Including: Amendment 1 (2018)].	Excluding the following measurements: Abrasion Resistance Test, Steel Pin, Concentration of Flammable Vapors, Softening Temperature (ISO 306), Ultrasonic Pressure, Capacitors and RC-units, Insulated Winding Wires, Methylated Spirits and Pressure Apparatus, Coated Printed Circuit Boards Test Apparatus (IEC 60664-3), CRT Strength, Ageing Test Apparatus for Elastomeric Parts, Partial Discharge Test (§2.10.5.4), UV Radiation, Bottom Fire Enclosure (hot flaming oil), Resistance to Ultra-violet Radiation, Resistance to Heat and Fire - ISO 9772 Test Apparatus, Microwave Radiation, AC Power Cords, (IEC 60227 flex), Oxygen Bomb, Endurance Test Apparatus (IEC 60384-14), Test Apparatus for Flammable Refrigerants, AP APG Tests (§ 37, 39, 41), ¿20 *Autoclave Tests (§ 44)¿, EO Sterilisation (§ 44), Gamma Sterilisation (§ 44), Power Measurements, ECG Performance, IR Irradiance, Vibration Test, Resistance to Corrosion, Water-borne Contaminants ¿ Salt Spray Test, Mechanical Strength (§ 21), Water-sulfur Dioxide Test, Compression Test, & Oil Immersion Test.
Accreditation Granted	05/14/2025	Basic safety and essential performance		6-461	IEC	60601-2-19 Edition 3.0 2020-09	Medical electrical equipment - Part 2-19: Particular requirements for the basic safety and essential performance of infant incubators
Accreditation Granted	05/14/2025	Basic safety and essential performance		6-462	IEC	60601-2-20 Edition 3.0 2020-09	Medical electrical equipment - Part 2-20: Particular requirements for the basic safety and essential performance of infant transport incubators
Accreditation Granted	05/14/2025	Basic safety and essential performance		6-463	IEC	60601-2-21 Edition 3.0 2020-09	Medical electrical equipment - Part 2-21: Particular requirements for the basic safety and essential performance of infant radiant warmers
Accreditation Granted	05/14/2025	Basic safety and essential performance		6-489	IEC	60601-2-52 Edition 1.1 2015-03 CONSOLIDATED VERSION	Medical electrical equipment - Part 2-52: Particular requirements for the basic safety and essential performance of medical beds
Accreditation Granted	04/12/2021	Basic safety and essential performance		9-114	IEC	60601-2-18: Edition 3.0 2009-08	Medical electrical equipment - Part 2-18: Particular requirements for the basic safety and essential performance of endoscopic equipment	Excluding the following measurements: Abrasion Resistance Test, Steel Pin, Concentration of Flammable Vapors, Softening Temperature (ISO 306), Ultrasonic Pressure, Capacitors and RC-units, Insulated Winding Wires, Methylated Spirits and Pressure Apparatus, Coated Printed Circuit Boards Test Apparatus (IEC 60664-3), CRT Strength, Ageing Test Apparatus for Elastomeric Parts, Partial Discharge Test (§2.10.5.4), UV Radiation, Bottom Fire Enclosure (hot flaming oil), Resistance to Ultra-violet Radiation, Resistance to Heat and Fire - ISO 9772 Test Apparatus, Microwave Radiation, AC Power Cords, (IEC 60227 flex), Oxygen Bomb, Endurance Test Apparatus (IEC 60384-14), Test Apparatus for Flammable Refrigerants, AP APG Tests (§ 37, 39, 41), ¿20 *Autoclave Tests (§ 44)¿, EO Sterilisation (§ 44), Gamma Sterilisation (§ 44), Power Measurements, ECG Performance, IR Irradiance, Vibration Test, Resistance to Corrosion, Water-borne Contaminants ¿ Salt Spray Test, Mechanical Strength (§ 21), Water-sulfur Dioxide Test, Compression Test, & Oil Immersion Test.
Accreditation Granted	04/12/2021	Basic safety and essential performance		9-119	IEC	60601-2-36 Edition 2.0 2014-04	Medical electrical equipment - Part 2-36: Particular requirements for the safety of equipment for extracorporeally induced lithotripsy	Excluding the following measurements: Abrasion Resistance Test, Steel Pin, Concentration of Flammable Vapors, Softening Temperature (ISO 306), Ultrasonic Pressure, Capacitors and RC-units, Insulated Winding Wires, Methylated Spirits and Pressure Apparatus, Coated Printed Circuit Boards Test Apparatus (IEC 60664-3), CRT Strength, Ageing Test Apparatus for Elastomeric Parts, Partial Discharge Test (§2.10.5.4), UV Radiation, Bottom Fire Enclosure (hot flaming oil), Resistance to Ultra-violet Radiation, Resistance to Heat and Fire - ISO 9772 Test Apparatus, Microwave Radiation, AC Power Cords, (IEC 60227 flex), Oxygen Bomb, Endurance Test Apparatus (IEC 60384-14), Test Apparatus for Flammable Refrigerants, AP APG Tests (§ 37, 39, 41), ¿20 *Autoclave Tests (§ 44)¿, EO Sterilisation (§ 44), Gamma Sterilisation (§ 44), Power Measurements, ECG Performance, IR Irradiance, Vibration Test, Resistance to Corrosion, Water-borne Contaminants ¿ Salt Spray Test, Mechanical Strength (§ 21), Water-sulfur Dioxide Test, Compression Test, & Oil Immersion Test.

Scope History toggle icon

(select icon to view/hide Scope History)

Action Type	ASCA Status	Effective Start Date	Biocompatibility Test Method	Recognition Number	Designation Number	Exclusions
Accredit	Accreditation Granted	05/14/2025		1-146	80601-2-12 Second edition 2020-02
Accredit	Accreditation Granted	05/14/2025		1-184	80601-2-55 Second edition 2018-02 [Including AMD1:2023]
Accredit	Accreditation Granted	05/14/2025		1-187	80601-2-12 Third edition 2023-11
Accredit	Accreditation Granted	05/14/2025		12-356	60601-2-22 Edition 4.0 2019-11
Accredit	Accreditation Granted	05/14/2025		19-41	61010-1 3rd Ed, dated May 12, 2012 with revision through July 19, 2019
Accredit	Accreditation Granted	05/14/2025		19-49	60601-1 Edition 3.2 2020-08 CONSOLIDATED VERSION
Accredit	Accreditation Granted	05/14/2025		19-50	TS 60601-4-2 Edition 1.0 2024-03
Accredit	Accreditation Granted	05/14/2025		6-461	60601-2-19 Edition 3.0 2020-09
Accredit	Accreditation Granted	05/14/2025		6-462	60601-2-20 Edition 3.0 2020-09
Accredit	Accreditation Granted	05/14/2025		6-463	60601-2-21 Edition 3.0 2020-09
Accredit	Accreditation Granted	05/14/2025		6-489	60601-2-52 Edition 1.1 2015-03 CONSOLIDATED VERSION
Accredit	Accreditation Granted	04/12/2021		1-140	80601-2-55 Second edition 2018-02	Excluding the following measurements: Abrasion Resistance Test, Steel Pin, Concentration of Flammable Vapors, Softening Temperature (ISO 306), Ultrasonic Pressure, Capacitors and RC-units, Insulated Winding Wires, Methylated Spirits and Pressure Apparatus, Coated Printed Circuit Boards Test Apparatus (IEC 60664-3), CRT Strength, Ageing Test Apparatus for Elastomeric Parts, Partial Discharge Test (§2.10.5.4), UV Radiation, Bottom Fire Enclosure (hot flaming oil), Resistance to Ultra-violet Radiation, Resistance to Heat and Fire - ISO 9772 Test Apparatus, Microwave Radiation, AC Power Cords, (IEC 60227 flex), Oxygen Bomb, Endurance Test Apparatus (IEC 60384-14), Test Apparatus for Flammable Refrigerants, AP APG Tests (§ 37, 39, 41), ¿20 *Autoclave Tests (§ 44)¿, EO Sterilisation (§ 44), Gamma Sterilisation (§ 44), Power Measurements, ECG Performance, IR Irradiance, Vibration Test, Resistance to Corrosion, Water-borne Contaminants ¿ Salt Spray Test, Mechanical Strength (§ 21), Water-sulfur Dioxide Test, Compression Test, & Oil Immersion Test.
Accredit	Accreditation Granted	04/12/2021		1-87	60601-2-23 Edition 3.0 2011-02	Excluding the following measurements: Abrasion Resistance Test, Steel Pin, Concentration of Flammable Vapors, Softening Temperature (ISO 306), Ultrasonic Pressure, Capacitors and RC-units, Insulated Winding Wires, Methylated Spirits and Pressure Apparatus, Coated Printed Circuit Boards Test Apparatus (IEC 60664-3), CRT Strength, Ageing Test Apparatus for Elastomeric Parts, Partial Discharge Test (§2.10.5.4), UV Radiation, Bottom Fire Enclosure (hot flaming oil), Resistance to Ultra-violet Radiation, Resistance to Heat and Fire - ISO 9772 Test Apparatus, Microwave Radiation, AC Power Cords, (IEC 60227 flex), Oxygen Bomb, Endurance Test Apparatus (IEC 60384-14), Test Apparatus for Flammable Refrigerants, AP APG Tests (§ 37, 39, 41), ¿20 *Autoclave Tests (§ 44)¿, EO Sterilisation (§ 44), Gamma Sterilisation (§ 44), Power Measurements, ECG Performance, IR Irradiance, Vibration Test, Resistance to Corrosion, Water-borne Contaminants ¿ Salt Spray Test, Mechanical Strength (§ 21), Water-sulfur Dioxide Test, Compression Test, & Oil Immersion Test.
Accredit	Accreditation Granted	04/12/2021		1-98	80601-2-12 First edition 2011-04-15	Excluding the following measurements: Abrasion Resistance Test, Steel Pin, Concentration of Flammable Vapors, Softening Temperature (ISO 306), Ultrasonic Pressure, Capacitors and RC-units, Insulated Winding Wires, Methylated Spirits and Pressure Apparatus, Coated Printed Circuit Boards Test Apparatus (IEC 60664-3), CRT Strength, Ageing Test Apparatus for Elastomeric Parts, Partial Discharge Test (§2.10.5.4), UV Radiation, Bottom Fire Enclosure (hot flaming oil), Resistance to Ultra-violet Radiation, Resistance to Heat and Fire - ISO 9772 Test Apparatus, Microwave Radiation, AC Power Cords, (IEC 60227 flex), Oxygen Bomb, Endurance Test Apparatus (IEC 60384-14), Test Apparatus for Flammable Refrigerants, AP APG Tests (§ 37, 39, 41), ¿20 *Autoclave Tests (§ 44)¿, EO Sterilisation (§ 44), Gamma Sterilisation (§ 44), Power Measurements, ECG Performance, IR Irradiance, Vibration Test, Resistance to Corrosion, Water-borne Contaminants ¿ Salt Spray Test, Mechanical Strength (§ 21), Water-sulfur Dioxide Test, Compression Test, & Oil Immersion Test.
Accredit	Accreditation Granted	04/12/2021		12-211	60601-2-29 Edition 3.0 2008-06	Excluding the following measurements: Abrasion Resistance Test, Steel Pin, Concentration of Flammable Vapors, Softening Temperature (ISO 306), Ultrasonic Pressure, Capacitors and RC-units, Insulated Winding Wires, Methylated Spirits and Pressure Apparatus, Coated Printed Circuit Boards Test Apparatus (IEC 60664-3), CRT Strength, Ageing Test Apparatus for Elastomeric Parts, Partial Discharge Test (§2.10.5.4), UV Radiation, Bottom Fire Enclosure (hot flaming oil), Resistance to Ultra-violet Radiation, Resistance to Heat and Fire - ISO 9772 Test Apparatus, Microwave Radiation, AC Power Cords, (IEC 60227 flex), Oxygen Bomb, Endurance Test Apparatus (IEC 60384-14), Test Apparatus for Flammable Refrigerants, AP APG Tests (§ 37, 39, 41), ¿20 *Autoclave Tests (§ 44)¿, EO Sterilisation (§ 44), Gamma Sterilisation (§ 44), Power Measurements, ECG Performance, IR Irradiance, Vibration Test, Resistance to Corrosion, Water-borne Contaminants ¿ Salt Spray Test, Mechanical Strength (§ 21), Water-sulfur Dioxide Test, Compression Test, & Oil Immersion Test.
Accredit	Accreditation Granted	04/12/2021		12-268	60601-2-22 Edition 3.1 2012-10	Excluding the following measurements: Abrasion Resistance Test, Steel Pin, Concentration of Flammable Vapors, Softening Temperature (ISO 306), Ultrasonic Pressure, Capacitors and RC-units, Insulated Winding Wires, Methylated Spirits and Pressure Apparatus, Coated Printed Circuit Boards Test Apparatus (IEC 60664-3), CRT Strength, Ageing Test Apparatus for Elastomeric Parts, Partial Discharge Test (§2.10.5.4), UV Radiation, Bottom Fire Enclosure (hot flaming oil), Resistance to Ultra-violet Radiation, Resistance to Heat and Fire - ISO 9772 Test Apparatus, Microwave Radiation, AC Power Cords, (IEC 60227 flex), Oxygen Bomb, Endurance Test Apparatus (IEC 60384-14), Test Apparatus for Flammable Refrigerants, AP APG Tests (§ 37, 39, 41), ¿20 *Autoclave Tests (§ 44)¿, EO Sterilisation (§ 44), Gamma Sterilisation (§ 44), Power Measurements, ECG Performance, IR Irradiance, Vibration Test, Resistance to Corrosion, Water-borne Contaminants ¿ Salt Spray Test, Mechanical Strength (§ 21), Water-sulfur Dioxide Test, Compression Test, & Oil Immersion Test.
Accredit	Accreditation Granted	04/12/2021		17-16	60601-2-10 Edition 2.1 2016-04	Excluding the following measurements: Abrasion Resistance Test, Steel Pin, Concentration of Flammable Vapors, Softening Temperature (ISO 306), Ultrasonic Pressure, Capacitors and RC-units, Insulated Winding Wires, Methylated Spirits and Pressure Apparatus, Coated Printed Circuit Boards Test Apparatus (IEC 60664-3), CRT Strength, Ageing Test Apparatus for Elastomeric Parts, Partial Discharge Test (§2.10.5.4), UV Radiation, Bottom Fire Enclosure (hot flaming oil), Resistance to Ultra-violet Radiation, Resistance to Heat and Fire - ISO 9772 Test Apparatus, Microwave Radiation, AC Power Cords, (IEC 60227 flex), Oxygen Bomb, Endurance Test Apparatus (IEC 60384-14), Test Apparatus for Flammable Refrigerants, AP APG Tests (§ 37, 39, 41), ¿20 *Autoclave Tests (§ 44)¿, EO Sterilisation (§ 44), Gamma Sterilisation (§ 44), Power Measurements, ECG Performance, IR Irradiance, Vibration Test, Resistance to Corrosion, Water-borne Contaminants ¿ Salt Spray Test, Mechanical Strength (§ 21), Water-sulfur Dioxide Test, Compression Test, & Oil Immersion Test.
Accredit	Accreditation Granted	04/12/2021		19-14	60601-1-11 Edition 2.0 2015-01	Excluding the following measurements: Abrasion Resistance Test, Steel Pin, Concentration of Flammable Vapors, Softening Temperature (ISO 306), Ultrasonic Pressure, Capacitors and RC-units, Insulated Winding Wires, Methylated Spirits and Pressure Apparatus, Coated Printed Circuit Boards Test Apparatus (IEC 60664-3), CRT Strength, Ageing Test Apparatus for Elastomeric Parts, Partial Discharge Test (§2.10.5.4), UV Radiation, Bottom Fire Enclosure (hot flaming oil), Resistance to Ultra-violet Radiation, Resistance to Heat and Fire - ISO 9772 Test Apparatus, Microwave Radiation, AC Power Cords, (IEC 60227 flex), Oxygen Bomb, Endurance Test Apparatus (IEC 60384-14), Test Apparatus for Flammable Refrigerants, AP APG Tests (§ 37, 39, 41), ¿20 *Autoclave Tests (§ 44)¿, EO Sterilisation (§ 44), Gamma Sterilisation (§ 44), Power Measurements, ECG Performance, IR Irradiance, Vibration Test, Resistance to Corrosion, Water-borne Contaminants ¿ Salt Spray Test, Mechanical Strength (§ 21), Water-sulfur Dioxide Test, Compression Test, & Oil Immersion Test.
Accredit	Accreditation Granted	04/12/2021		19-15	60601-1-12 Edition 1.0 2014-06	Excluding the following measurements: Abrasion Resistance Test, Steel Pin, Concentration of Flammable Vapors, Softening Temperature (ISO 306), Ultrasonic Pressure, Capacitors and RC-units, Insulated Winding Wires, Methylated Spirits and Pressure Apparatus, Coated Printed Circuit Boards Test Apparatus (IEC 60664-3), CRT Strength, Ageing Test Apparatus for Elastomeric Parts, Partial Discharge Test (§2.10.5.4), UV Radiation, Bottom Fire Enclosure (hot flaming oil), Resistance to Ultra-violet Radiation, Resistance to Heat and Fire - ISO 9772 Test Apparatus, Microwave Radiation, AC Power Cords, (IEC 60227 flex), Oxygen Bomb, Endurance Test Apparatus (IEC 60384-14), Test Apparatus for Flammable Refrigerants, AP APG Tests (§ 37, 39, 41), ¿20 *Autoclave Tests (§ 44)¿, EO Sterilisation (§ 44), Gamma Sterilisation (§ 44), Power Measurements, ECG Performance, IR Irradiance, Vibration Test, Resistance to Corrosion, Water-borne Contaminants ¿ Salt Spray Test, Mechanical Strength (§ 21), Water-sulfur Dioxide Test, Compression Test, & Oil Immersion Test.
Accredit	Accreditation Granted	04/12/2021		19-16	HA60601-1-11:2015	Excluding the following measurements: Abrasion Resistance Test, Steel Pin, Concentration of Flammable Vapors, Softening Temperature (ISO 306), Ultrasonic Pressure, Capacitors and RC-units, Insulated Winding Wires, Methylated Spirits and Pressure Apparatus, Coated Printed Circuit Boards Test Apparatus (IEC 60664-3), CRT Strength, Ageing Test Apparatus for Elastomeric Parts, Partial Discharge Test (§2.10.5.4), UV Radiation, Bottom Fire Enclosure (hot flaming oil), Resistance to Ultra-violet Radiation, Resistance to Heat and Fire - ISO 9772 Test Apparatus, Microwave Radiation, AC Power Cords, (IEC 60227 flex), Oxygen Bomb, Endurance Test Apparatus (IEC 60384-14), Test Apparatus for Flammable Refrigerants, AP APG Tests (§ 37, 39, 41), ¿20 *Autoclave Tests (§ 44)¿, EO Sterilisation (§ 44), Gamma Sterilisation (§ 44), Power Measurements, ECG Performance, IR Irradiance, Vibration Test, Resistance to Corrosion, Water-borne Contaminants ¿ Salt Spray Test, Mechanical Strength (§ 21), Water-sulfur Dioxide Test, Compression Test, & Oil Immersion Test.
Accredit	Accreditation Granted	04/12/2021		19-34	61010-1 Edition 3.1 2017-01 CONSOLIDATED VERSION	Excluding the following measurements: Abrasion Resistance Test, Steel Pin, Concentration of Flammable Vapors, Softening Temperature (ISO 306), Ultrasonic Pressure, Capacitors and RC-units, Insulated Winding Wires, Methylated Spirits and Pressure Apparatus, Coated Printed Circuit Boards Test Apparatus (IEC 60664-3), CRT Strength, Ageing Test Apparatus for Elastomeric Parts, Partial Discharge Test (§2.10.5.4), UV Radiation, Bottom Fire Enclosure (hot flaming oil), Resistance to Ultra-violet Radiation, Resistance to Heat and Fire - ISO 9772 Test Apparatus, Microwave Radiation, AC Power Cords, (IEC 60227 flex), Oxygen Bomb, Endurance Test Apparatus (IEC 60384-14), Test Apparatus for Flammable Refrigerants, AP APG Tests (§ 37, 39, 41), ¿20 *Autoclave Tests (§ 44)¿, EO Sterilisation (§ 44), Gamma Sterilisation (§ 44), Power Measurements, ECG Performance, IR Irradiance, Vibration Test, Resistance to Corrosion, Water-borne Contaminants ¿ Salt Spray Test, Mechanical Strength (§ 21), Water-sulfur Dioxide Test, Compression Test, & Oil Immersion Test.
Accredit	Accreditation Granted	04/12/2021		19-36	60601-1-2 Edition 4.1 2020-09 CONSOLIDATED VERSION	Excluding the following measurements: Abrasion Resistance Test, Steel Pin, Concentration of Flammable Vapors, Softening Temperature (ISO 306), Ultrasonic Pressure, Capacitors and RC-units, Insulated Winding Wires, Methylated Spirits and Pressure Apparatus, Coated Printed Circuit Boards Test Apparatus (IEC 60664-3), CRT Strength, Ageing Test Apparatus for Elastomeric Parts, Partial Discharge Test (§2.10.5.4), UV Radiation, Bottom Fire Enclosure (hot flaming oil), Resistance to Ultra-violet Radiation, Resistance to Heat and Fire - ISO 9772 Test Apparatus, Microwave Radiation, AC Power Cords, (IEC 60227 flex), Oxygen Bomb, Endurance Test Apparatus (IEC 60384-14), Test Apparatus for Flammable Refrigerants, AP APG Tests (§ 37, 39, 41), ¿20 *Autoclave Tests (§ 44)¿, EO Sterilisation (§ 44), Gamma Sterilisation (§ 44), Power Measurements, ECG Performance, IR Irradiance, Vibration Test, Resistance to Corrosion, Water-borne Contaminants ¿ Salt Spray Test, Mechanical Strength (§ 21), Water-sulfur Dioxide Test, Compression Test, & Oil Immersion Test.
Accredit	Accreditation Granted	04/12/2021		19-37	60601-1-10 Edition 1.2 2020-07 CONSOLIDATED VERSION	Excluding the following measurements: Abrasion Resistance Test, Steel Pin, Concentration of Flammable Vapors, Softening Temperature (ISO 306), Ultrasonic Pressure, Capacitors and RC-units, Insulated Winding Wires, Methylated Spirits and Pressure Apparatus, Coated Printed Circuit Boards Test Apparatus (IEC 60664-3), CRT Strength, Ageing Test Apparatus for Elastomeric Parts, Partial Discharge Test (§2.10.5.4), UV Radiation, Bottom Fire Enclosure (hot flaming oil), Resistance to Ultra-violet Radiation, Resistance to Heat and Fire - ISO 9772 Test Apparatus, Microwave Radiation, AC Power Cords, (IEC 60227 flex), Oxygen Bomb, Endurance Test Apparatus (IEC 60384-14), Test Apparatus for Flammable Refrigerants, AP APG Tests (§ 37, 39, 41), ¿20 *Autoclave Tests (§ 44)¿, EO Sterilisation (§ 44), Gamma Sterilisation (§ 44), Power Measurements, ECG Performance, IR Irradiance, Vibration Test, Resistance to Corrosion, Water-borne Contaminants ¿ Salt Spray Test, Mechanical Strength (§ 21), Water-sulfur Dioxide Test, Compression Test, & Oil Immersion Test.
Accredit	Accreditation Granted	04/12/2021		19-38	60601-1-11 Edition 2.1 2020-07 CONSOLIDATED VERSION	Excluding the following measurements: Abrasion Resistance Test, Steel Pin, Concentration of Flammable Vapors, Softening Temperature (ISO 306), Ultrasonic Pressure, Capacitors and RC-units, Insulated Winding Wires, Methylated Spirits and Pressure Apparatus, Coated Printed Circuit Boards Test Apparatus (IEC 60664-3), CRT Strength, Ageing Test Apparatus for Elastomeric Parts, Partial Discharge Test (§2.10.5.4), UV Radiation, Bottom Fire Enclosure (hot flaming oil), Resistance to Ultra-violet Radiation, Resistance to Heat and Fire - ISO 9772 Test Apparatus, Microwave Radiation, AC Power Cords, (IEC 60227 flex), Oxygen Bomb, Endurance Test Apparatus (IEC 60384-14), Test Apparatus for Flammable Refrigerants, AP APG Tests (§ 37, 39, 41), ¿20 *Autoclave Tests (§ 44)¿, EO Sterilisation (§ 44), Gamma Sterilisation (§ 44), Power Measurements, ECG Performance, IR Irradiance, Vibration Test, Resistance to Corrosion, Water-borne Contaminants ¿ Salt Spray Test, Mechanical Strength (§ 21), Water-sulfur Dioxide Test, Compression Test, & Oil Immersion Test.
Accredit	Accreditation Granted	04/12/2021		19-39	60601-1-12 Edition 1.1 2020-07 CONSOLIDATED VERSION	Excluding the following measurements: Abrasion Resistance Test, Steel Pin, Concentration of Flammable Vapors, Softening Temperature (ISO 306), Ultrasonic Pressure, Capacitors and RC-units, Insulated Winding Wires, Methylated Spirits and Pressure Apparatus, Coated Printed Circuit Boards Test Apparatus (IEC 60664-3), CRT Strength, Ageing Test Apparatus for Elastomeric Parts, Partial Discharge Test (§2.10.5.4), UV Radiation, Bottom Fire Enclosure (hot flaming oil), Resistance to Ultra-violet Radiation, Resistance to Heat and Fire - ISO 9772 Test Apparatus, Microwave Radiation, AC Power Cords, (IEC 60227 flex), Oxygen Bomb, Endurance Test Apparatus (IEC 60384-14), Test Apparatus for Flammable Refrigerants, AP APG Tests (§ 37, 39, 41), ¿20 *Autoclave Tests (§ 44)¿, EO Sterilisation (§ 44), Gamma Sterilisation (§ 44), Power Measurements, ECG Performance, IR Irradiance, Vibration Test, Resistance to Corrosion, Water-borne Contaminants ¿ Salt Spray Test, Mechanical Strength (§ 21), Water-sulfur Dioxide Test, Compression Test, & Oil Immersion Test.
Accredit	Accreditation Granted	04/12/2021		19-4	ES60601-1:2005/(R)2012 and A1:2012, C1:2009/(R)2012 and A2:2010/(R)2012 (Consolidated Text)
Accredit	Accreditation Granted	04/12/2021		19-46	ES60601-1:2005/(R)2012 & A1:2012, C1:2009/(R)2012 & A2:2010/(R)2012 (Cons. Text) [Incl. AMD2:2021]
Accredit	Accreditation Granted	04/12/2021		19-8	60601-1-2 Edition 4.0 2014-02	Excluding the following measurements: Abrasion Resistance Test, Steel Pin, Concentration of Flammable Vapors, Softening Temperature (ISO 306), Ultrasonic Pressure, Capacitors and RC-units, Insulated Winding Wires, Methylated Spirits and Pressure Apparatus, Coated Printed Circuit Boards Test Apparatus (IEC 60664-3), CRT Strength, Ageing Test Apparatus for Elastomeric Parts, Partial Discharge Test (§2.10.5.4), UV Radiation, Bottom Fire Enclosure (hot flaming oil), Resistance to Ultra-violet Radiation, Resistance to Heat and Fire - ISO 9772 Test Apparatus, Microwave Radiation, AC Power Cords, (IEC 60227 flex), Oxygen Bomb, Endurance Test Apparatus (IEC 60384-14), Test Apparatus for Flammable Refrigerants, AP APG Tests (§ 37, 39, 41), ¿20 *Autoclave Tests (§ 44)¿, EO Sterilisation (§ 44), Gamma Sterilisation (§ 44), Power Measurements, ECG Performance, IR Irradiance, Vibration Test, Resistance to Corrosion, Water-borne Contaminants ¿ Salt Spray Test, Mechanical Strength (§ 21), Water-sulfur Dioxide Test, Compression Test, & Oil Immersion Test.
Accredit	Accreditation Granted	04/12/2021		19-9	60601-1-10 Edition 1.1 2013-11	Excluding the following measurements: Abrasion Resistance Test, Steel Pin, Concentration of Flammable Vapors, Softening Temperature (ISO 306), Ultrasonic Pressure, Capacitors and RC-units, Insulated Winding Wires, Methylated Spirits and Pressure Apparatus, Coated Printed Circuit Boards Test Apparatus (IEC 60664-3), CRT Strength, Ageing Test Apparatus for Elastomeric Parts, Partial Discharge Test (§2.10.5.4), UV Radiation, Bottom Fire Enclosure (hot flaming oil), Resistance to Ultra-violet Radiation, Resistance to Heat and Fire - ISO 9772 Test Apparatus, Microwave Radiation, AC Power Cords, (IEC 60227 flex), Oxygen Bomb, Endurance Test Apparatus (IEC 60384-14), Test Apparatus for Flammable Refrigerants, AP APG Tests (§ 37, 39, 41), ¿20 *Autoclave Tests (§ 44)¿, EO Sterilisation (§ 44), Gamma Sterilisation (§ 44), Power Measurements, ECG Performance, IR Irradiance, Vibration Test, Resistance to Corrosion, Water-borne Contaminants ¿ Salt Spray Test, Mechanical Strength (§ 21), Water-sulfur Dioxide Test, Compression Test, & Oil Immersion Test.
Accredit	Accreditation Granted	04/12/2021		3-102	60601-2-31 Edition 2.1 2011-09	Excluding the following measurements: Abrasion Resistance Test, Steel Pin, Concentration of Flammable Vapors, Softening Temperature (ISO 306), Ultrasonic Pressure, Capacitors and RC-units, Insulated Winding Wires, Methylated Spirits and Pressure Apparatus, Coated Printed Circuit Boards Test Apparatus (IEC 60664-3), CRT Strength, Ageing Test Apparatus for Elastomeric Parts, Partial Discharge Test (§2.10.5.4), UV Radiation, Bottom Fire Enclosure (hot flaming oil), Resistance to Ultra-violet Radiation, Resistance to Heat and Fire - ISO 9772 Test Apparatus, Microwave Radiation, AC Power Cords, (IEC 60227 flex), Oxygen Bomb, Endurance Test Apparatus (IEC 60384-14), Test Apparatus for Flammable Refrigerants, AP APG Tests (§ 37, 39, 41), ¿20 *Autoclave Tests (§ 44)¿, EO Sterilisation (§ 44), Gamma Sterilisation (§ 44), Power Measurements, ECG Performance, IR Irradiance, Vibration Test, Resistance to Corrosion, Water-borne Contaminants ¿ Salt Spray Test, Mechanical Strength (§ 21), Water-sulfur Dioxide Test, Compression Test, & Oil Immersion Test.
Accredit	Accreditation Granted	04/12/2021		3-105	60601-2-25 Edition 2.0 2011-10	Excluding the following measurements: Abrasion Resistance Test, Steel Pin, Concentration of Flammable Vapors, Softening Temperature (ISO 306), Ultrasonic Pressure, Capacitors and RC-units, Insulated Winding Wires, Methylated Spirits and Pressure Apparatus, Coated Printed Circuit Boards Test Apparatus (IEC 60664-3), CRT Strength, Ageing Test Apparatus for Elastomeric Parts, Partial Discharge Test (§2.10.5.4), UV Radiation, Bottom Fire Enclosure (hot flaming oil), Resistance to Ultra-violet Radiation, Resistance to Heat and Fire - ISO 9772 Test Apparatus, Microwave Radiation, AC Power Cords, (IEC 60227 flex), Oxygen Bomb, Endurance Test Apparatus (IEC 60384-14), Test Apparatus for Flammable Refrigerants, AP APG Tests (§ 37, 39, 41), ¿20 *Autoclave Tests (§ 44)¿, EO Sterilisation (§ 44), Gamma Sterilisation (§ 44), Power Measurements, ECG Performance, IR Irradiance, Vibration Test, Resistance to Corrosion, Water-borne Contaminants ¿ Salt Spray Test, Mechanical Strength (§ 21), Water-sulfur Dioxide Test, Compression Test, & Oil Immersion Test.
Accredit	Accreditation Granted	04/12/2021		3-115	60601-2-34 Edition 3.0 2011-05	Excluding the following measurements: Abrasion Resistance Test, Steel Pin, Concentration of Flammable Vapors, Softening Temperature (ISO 306), Ultrasonic Pressure, Capacitors and RC-units, Insulated Winding Wires, Methylated Spirits and Pressure Apparatus, Coated Printed Circuit Boards Test Apparatus (IEC 60664-3), CRT Strength, Ageing Test Apparatus for Elastomeric Parts, Partial Discharge Test (§2.10.5.4), UV Radiation, Bottom Fire Enclosure (hot flaming oil), Resistance to Ultra-violet Radiation, Resistance to Heat and Fire - ISO 9772 Test Apparatus, Microwave Radiation, AC Power Cords, (IEC 60227 flex), Oxygen Bomb, Endurance Test Apparatus (IEC 60384-14), Test Apparatus for Flammable Refrigerants, AP APG Tests (§ 37, 39, 41), ¿20 *Autoclave Tests (§ 44)¿, EO Sterilisation (§ 44), Gamma Sterilisation (§ 44), Power Measurements, ECG Performance, IR Irradiance, Vibration Test, Resistance to Corrosion, Water-borne Contaminants ¿ Salt Spray Test, Mechanical Strength (§ 21), Water-sulfur Dioxide Test, Compression Test, & Oil Immersion Test.
Accredit	Accreditation Granted	04/12/2021		3-123	80601-2-30: Edition 2.0 2018-03	Excluding the following measurements: Abrasion Resistance Test, Steel Pin, Concentration of Flammable Vapors, Softening Temperature (ISO 306), Ultrasonic Pressure, Capacitors and RC-units, Insulated Winding Wires, Methylated Spirits and Pressure Apparatus, Coated Printed Circuit Boards Test Apparatus (IEC 60664-3), CRT Strength, Ageing Test Apparatus for Elastomeric Parts, Partial Discharge Test (§2.10.5.4), UV Radiation, Bottom Fire Enclosure (hot flaming oil), Resistance to Ultra-violet Radiation, Resistance to Heat and Fire - ISO 9772 Test Apparatus, Microwave Radiation, AC Power Cords, (IEC 60227 flex), Oxygen Bomb, Endurance Test Apparatus (IEC 60384-14), Test Apparatus for Flammable Refrigerants, AP APG Tests (§ 37, 39, 41), ¿20 *Autoclave Tests (§ 44)¿, EO Sterilisation (§ 44), Gamma Sterilisation (§ 44), Power Measurements, ECG Performance, IR Irradiance, Vibration Test, Resistance to Corrosion, Water-borne Contaminants ¿ Salt Spray Test, Mechanical Strength (§ 21), Water-sulfur Dioxide Test, Compression Test, & Oil Immersion Test.
Accredit	Accreditation Granted	04/12/2021		3-126	60601-2-27 Edition 3.0 2011-03	Excluding the following measurements: Abrasion Resistance Test, Steel Pin, Concentration of Flammable Vapors, Softening Temperature (ISO 306), Ultrasonic Pressure, Capacitors and RC-units, Insulated Winding Wires, Methylated Spirits and Pressure Apparatus, Coated Printed Circuit Boards Test Apparatus (IEC 60664-3), CRT Strength, Ageing Test Apparatus for Elastomeric Parts, Partial Discharge Test (§2.10.5.4), UV Radiation, Bottom Fire Enclosure (hot flaming oil), Resistance to Ultra-violet Radiation, Resistance to Heat and Fire - ISO 9772 Test Apparatus, Microwave Radiation, AC Power Cords, (IEC 60227 flex), Oxygen Bomb, Endurance Test Apparatus (IEC 60384-14), Test Apparatus for Flammable Refrigerants, AP APG Tests (§ 37, 39, 41), ¿20 *Autoclave Tests (§ 44)¿, EO Sterilisation (§ 44), Gamma Sterilisation (§ 44), Power Measurements, ECG Performance, IR Irradiance, Vibration Test, Resistance to Corrosion, Water-borne Contaminants ¿ Salt Spray Test, Mechanical Strength (§ 21), Water-sulfur Dioxide Test, Compression Test, & Oil Immersion Test.
Accredit	Accreditation Granted	04/12/2021		3-155	60601-2-47 Edition 2.0 2012-02	Excluding the following measurements: Abrasion Resistance Test, Steel Pin, Concentration of Flammable Vapors, Softening Temperature (ISO 306), Ultrasonic Pressure, Capacitors and RC-units, Insulated Winding Wires, Methylated Spirits and Pressure Apparatus, Coated Printed Circuit Boards Test Apparatus (IEC 60664-3), CRT Strength, Ageing Test Apparatus for Elastomeric Parts, Partial Discharge Test (§2.10.5.4), UV Radiation, Bottom Fire Enclosure (hot flaming oil), Resistance to Ultra-violet Radiation, Resistance to Heat and Fire - ISO 9772 Test Apparatus, Microwave Radiation, AC Power Cords, (IEC 60227 flex), Oxygen Bomb, Endurance Test Apparatus (IEC 60384-14), Test Apparatus for Flammable Refrigerants, AP APG Tests (§ 37, 39, 41), ¿20 *Autoclave Tests (§ 44)¿, EO Sterilisation (§ 44), Gamma Sterilisation (§ 44), Power Measurements, ECG Performance, IR Irradiance, Vibration Test, Resistance to Corrosion, Water-borne Contaminants ¿ Salt Spray Test, Mechanical Strength (§ 21), Water-sulfur Dioxide Test, Compression Test, & Oil Immersion Test.
Accredit	Accreditation Granted	04/12/2021		4-262	80601-2-60 Edition 2.0 2019-06	Excluding the following measurements: Abrasion Resistance Test, Steel Pin, Concentration of Flammable Vapors, Softening Temperature (ISO 306), Ultrasonic Pressure, Capacitors and RC-units, Insulated Winding Wires, Methylated Spirits and Pressure Apparatus, Coated Printed Circuit Boards Test Apparatus (IEC 60664-3), CRT Strength, Ageing Test Apparatus for Elastomeric Parts, Partial Discharge Test (§2.10.5.4), UV Radiation, Bottom Fire Enclosure (hot flaming oil), Resistance to Ultra-violet Radiation, Resistance to Heat and Fire - ISO 9772 Test Apparatus, Microwave Radiation, AC Power Cords, (IEC 60227 flex), Oxygen Bomb, Endurance Test Apparatus (IEC 60384-14), Test Apparatus for Flammable Refrigerants, AP APG Tests (§ 37, 39, 41), ¿20 *Autoclave Tests (§ 44)¿, EO Sterilisation (§ 44), Gamma Sterilisation (§ 44), Power Measurements, ECG Performance, IR Irradiance, Vibration Test, Resistance to Corrosion, Water-borne Contaminants ¿ Salt Spray Test, Mechanical Strength (§ 21), Water-sulfur Dioxide Test, Compression Test, & Oil Immersion Test.
Accredit	Accreditation Granted	04/12/2021		5-131	60601-1-8 Edition 2.2 2020-07 CONSOLIDATED VERSION	Excluding the following measurements: Abrasion Resistance Test, Steel Pin, Concentration of Flammable Vapors, Softening Temperature (ISO 306), Ultrasonic Pressure, Capacitors and RC-units, Insulated Winding Wires, Methylated Spirits and Pressure Apparatus, Coated Printed Circuit Boards Test Apparatus (IEC 60664-3), CRT Strength, Ageing Test Apparatus for Elastomeric Parts, Partial Discharge Test (§2.10.5.4), UV Radiation, Bottom Fire Enclosure (hot flaming oil), Resistance to Ultra-violet Radiation, Resistance to Heat and Fire - ISO 9772 Test Apparatus, Microwave Radiation, AC Power Cords, (IEC 60227 flex), Oxygen Bomb, Endurance Test Apparatus (IEC 60384-14), Test Apparatus for Flammable Refrigerants, AP APG Tests (§ 37, 39, 41), ¿20 *Autoclave Tests (§ 44)¿, EO Sterilisation (§ 44), Gamma Sterilisation (§ 44), Power Measurements, ECG Performance, IR Irradiance, Vibration Test, Resistance to Corrosion, Water-borne Contaminants ¿ Salt Spray Test, Mechanical Strength (§ 21), Water-sulfur Dioxide Test, Compression Test, & Oil Immersion Test.
Accredit	Accreditation Granted	04/12/2021		5-132	60601-1-6 Edition 3.2 2020-07 CONSOLIDATED VERSION	Excluding the following measurements: Abrasion Resistance Test, Steel Pin, Concentration of Flammable Vapors, Softening Temperature (ISO 306), Ultrasonic Pressure, Capacitors and RC-units, Insulated Winding Wires, Methylated Spirits and Pressure Apparatus, Coated Printed Circuit Boards Test Apparatus (IEC 60664-3), CRT Strength, Ageing Test Apparatus for Elastomeric Parts, Partial Discharge Test (§2.10.5.4), UV Radiation, Bottom Fire Enclosure (hot flaming oil), Resistance to Ultra-violet Radiation, Resistance to Heat and Fire - ISO 9772 Test Apparatus, Microwave Radiation, AC Power Cords, (IEC 60227 flex), Oxygen Bomb, Endurance Test Apparatus (IEC 60384-14), Test Apparatus for Flammable Refrigerants, AP APG Tests (§ 37, 39, 41), ¿20 *Autoclave Tests (§ 44)¿, EO Sterilisation (§ 44), Gamma Sterilisation (§ 44), Power Measurements, ECG Performance, IR Irradiance, Vibration Test, Resistance to Corrosion, Water-borne Contaminants ¿ Salt Spray Test, Mechanical Strength (§ 21), Water-sulfur Dioxide Test, Compression Test, & Oil Immersion Test.
Accredit	Accreditation Granted	04/12/2021		5-76	60601-1-8 Edition 2.1 2012-11	Excluding the following measurements: Abrasion Resistance Test, Steel Pin, Concentration of Flammable Vapors, Softening Temperature (ISO 306), Ultrasonic Pressure, Capacitors and RC-units, Insulated Winding Wires, Methylated Spirits and Pressure Apparatus, Coated Printed Circuit Boards Test Apparatus (IEC 60664-3), CRT Strength, Ageing Test Apparatus for Elastomeric Parts, Partial Discharge Test (§2.10.5.4), UV Radiation, Bottom Fire Enclosure (hot flaming oil), Resistance to Ultra-violet Radiation, Resistance to Heat and Fire - ISO 9772 Test Apparatus, Microwave Radiation, AC Power Cords, (IEC 60227 flex), Oxygen Bomb, Endurance Test Apparatus (IEC 60384-14), Test Apparatus for Flammable Refrigerants, AP APG Tests (§ 37, 39, 41), ¿20 *Autoclave Tests (§ 44)¿, EO Sterilisation (§ 44), Gamma Sterilisation (§ 44), Power Measurements, ECG Performance, IR Irradiance, Vibration Test, Resistance to Corrosion, Water-borne Contaminants ¿ Salt Spray Test, Mechanical Strength (§ 21), Water-sulfur Dioxide Test, Compression Test, & Oil Immersion Test.
Accredit	Accreditation Granted	04/12/2021		5-89	60601-1-6 Edition 3.1 2013-10	Excluding the following measurements: Abrasion Resistance Test, Steel Pin, Concentration of Flammable Vapors, Softening Temperature (ISO 306), Ultrasonic Pressure, Capacitors and RC-units, Insulated Winding Wires, Methylated Spirits and Pressure Apparatus, Coated Printed Circuit Boards Test Apparatus (IEC 60664-3), CRT Strength, Ageing Test Apparatus for Elastomeric Parts, Partial Discharge Test (§2.10.5.4), UV Radiation, Bottom Fire Enclosure (hot flaming oil), Resistance to Ultra-violet Radiation, Resistance to Heat and Fire - ISO 9772 Test Apparatus, Microwave Radiation, AC Power Cords, (IEC 60227 flex), Oxygen Bomb, Endurance Test Apparatus (IEC 60384-14), Test Apparatus for Flammable Refrigerants, AP APG Tests (§ 37, 39, 41), ¿20 *Autoclave Tests (§ 44)¿, EO Sterilisation (§ 44), Gamma Sterilisation (§ 44), Power Measurements, ECG Performance, IR Irradiance, Vibration Test, Resistance to Corrosion, Water-borne Contaminants ¿ Salt Spray Test, Mechanical Strength (§ 21), Water-sulfur Dioxide Test, Compression Test, & Oil Immersion Test.
Accredit	Accreditation Granted	04/12/2021		6-321	60601-2-52 Edition 1.0 2009-12	Excluding the following measurements: Abrasion Resistance Test, Steel Pin, Concentration of Flammable Vapors, Softening Temperature (ISO 306), Ultrasonic Pressure, Capacitors and RC-units, Insulated Winding Wires, Methylated Spirits and Pressure Apparatus, Coated Printed Circuit Boards Test Apparatus (IEC 60664-3), CRT Strength, Ageing Test Apparatus for Elastomeric Parts, Partial Discharge Test (§2.10.5.4), UV Radiation, Bottom Fire Enclosure (hot flaming oil), Resistance to Ultra-violet Radiation, Resistance to Heat and Fire - ISO 9772 Test Apparatus, Microwave Radiation, AC Power Cords, (IEC 60227 flex), Oxygen Bomb, Endurance Test Apparatus (IEC 60384-14), Test Apparatus for Flammable Refrigerants, AP APG Tests (§ 37, 39, 41), ¿20 *Autoclave Tests (§ 44)¿, EO Sterilisation (§ 44), Gamma Sterilisation (§ 44), Power Measurements, ECG Performance, IR Irradiance, Vibration Test, Resistance to Corrosion, Water-borne Contaminants ¿ Salt Spray Test, Mechanical Strength (§ 21), Water-sulfur Dioxide Test, Compression Test, & Oil Immersion Test.
Accredit	Accreditation Granted	04/12/2021		6-385	60601-2-19 Edition 2.1 2016-04	Excluding the following measurements: Abrasion Resistance Test, Steel Pin, Concentration of Flammable Vapors, Softening Temperature (ISO 306), Ultrasonic Pressure, Capacitors and RC-units, Insulated Winding Wires, Methylated Spirits and Pressure Apparatus, Coated Printed Circuit Boards Test Apparatus (IEC 60664-3), CRT Strength, Ageing Test Apparatus for Elastomeric Parts, Partial Discharge Test (§2.10.5.4), UV Radiation, Bottom Fire Enclosure (hot flaming oil), Resistance to Ultra-violet Radiation, Resistance to Heat and Fire - ISO 9772 Test Apparatus, Microwave Radiation, AC Power Cords, (IEC 60227 flex), Oxygen Bomb, Endurance Test Apparatus (IEC 60384-14), Test Apparatus for Flammable Refrigerants, AP APG Tests (§ 37, 39, 41), ¿20 *Autoclave Tests (§ 44)¿, EO Sterilisation (§ 44), Gamma Sterilisation (§ 44), Power Measurements, ECG Performance, IR Irradiance, Vibration Test, Resistance to Corrosion, Water-borne Contaminants ¿ Salt Spray Test, Mechanical Strength (§ 21), Water-sulfur Dioxide Test, Compression Test, & Oil Immersion Test.
Accredit	Accreditation Granted	04/12/2021		6-386	60601-2-20 Edition 2.1 2016-04	Excluding the following measurements: Abrasion Resistance Test, Steel Pin, Concentration of Flammable Vapors, Softening Temperature (ISO 306), Ultrasonic Pressure, Capacitors and RC-units, Insulated Winding Wires, Methylated Spirits and Pressure Apparatus, Coated Printed Circuit Boards Test Apparatus (IEC 60664-3), CRT Strength, Ageing Test Apparatus for Elastomeric Parts, Partial Discharge Test (§2.10.5.4), UV Radiation, Bottom Fire Enclosure (hot flaming oil), Resistance to Ultra-violet Radiation, Resistance to Heat and Fire - ISO 9772 Test Apparatus, Microwave Radiation, AC Power Cords, (IEC 60227 flex), Oxygen Bomb, Endurance Test Apparatus (IEC 60384-14), Test Apparatus for Flammable Refrigerants, AP APG Tests (§ 37, 39, 41), ¿20 *Autoclave Tests (§ 44)¿, EO Sterilisation (§ 44), Gamma Sterilisation (§ 44), Power Measurements, ECG Performance, IR Irradiance, Vibration Test, Resistance to Corrosion, Water-borne Contaminants ¿ Salt Spray Test, Mechanical Strength (§ 21), Water-sulfur Dioxide Test, Compression Test, & Oil Immersion Test.
Accredit	Accreditation Granted	04/12/2021		6-388	60601-2-21 Edition 2.1 2016-04	Excluding the following measurements: Abrasion Resistance Test, Steel Pin, Concentration of Flammable Vapors, Softening Temperature (ISO 306), Ultrasonic Pressure, Capacitors and RC-units, Insulated Winding Wires, Methylated Spirits and Pressure Apparatus, Coated Printed Circuit Boards Test Apparatus (IEC 60664-3), CRT Strength, Ageing Test Apparatus for Elastomeric Parts, Partial Discharge Test (§2.10.5.4), UV Radiation, Bottom Fire Enclosure (hot flaming oil), Resistance to Ultra-violet Radiation, Resistance to Heat and Fire - ISO 9772 Test Apparatus, Microwave Radiation, AC Power Cords, (IEC 60227 flex), Oxygen Bomb, Endurance Test Apparatus (IEC 60384-14), Test Apparatus for Flammable Refrigerants, AP APG Tests (§ 37, 39, 41), ¿20 *Autoclave Tests (§ 44)¿, EO Sterilisation (§ 44), Gamma Sterilisation (§ 44), Power Measurements, ECG Performance, IR Irradiance, Vibration Test, Resistance to Corrosion, Water-borne Contaminants ¿ Salt Spray Test, Mechanical Strength (§ 21), Water-sulfur Dioxide Test, Compression Test, & Oil Immersion Test.
Accredit	Accreditation Granted	04/12/2021		6-389	60601-2-2 Edition 6.0 2017-03	Excluding the following measurements: Abrasion Resistance Test, Steel Pin, Concentration of Flammable Vapors, Softening Temperature (ISO 306), Ultrasonic Pressure, Capacitors and RC-units, Insulated Winding Wires, Methylated Spirits and Pressure Apparatus, Coated Printed Circuit Boards Test Apparatus (IEC 60664-3), CRT Strength, Ageing Test Apparatus for Elastomeric Parts, Partial Discharge Test (§2.10.5.4), UV Radiation, Bottom Fire Enclosure (hot flaming oil), Resistance to Ultra-violet Radiation, Resistance to Heat and Fire - ISO 9772 Test Apparatus, Microwave Radiation, AC Power Cords, (IEC 60227 flex), Oxygen Bomb, Endurance Test Apparatus (IEC 60384-14), Test Apparatus for Flammable Refrigerants, AP APG Tests (§ 37, 39, 41), ¿20 *Autoclave Tests (§ 44)¿, EO Sterilisation (§ 44), Gamma Sterilisation (§ 44), Power Measurements, ECG Performance, IR Irradiance, Vibration Test, Resistance to Corrosion, Water-borne Contaminants ¿ Salt Spray Test, Mechanical Strength (§ 21), Water-sulfur Dioxide Test, Compression Test, & Oil Immersion Test.
Accredit	Accreditation Granted	04/12/2021		6-421	80601-2-56 Second edition 2017-03	Excluding the following measurements: Abrasion Resistance Test, Steel Pin, Concentration of Flammable Vapors, Softening Temperature (ISO 306), Ultrasonic Pressure, Capacitors and RC-units, Insulated Winding Wires, Methylated Spirits and Pressure Apparatus, Coated Printed Circuit Boards Test Apparatus (IEC 60664-3), CRT Strength, Ageing Test Apparatus for Elastomeric Parts, Partial Discharge Test (§2.10.5.4), UV Radiation, Bottom Fire Enclosure (hot flaming oil), Resistance to Ultra-violet Radiation, Resistance to Heat and Fire - ISO 9772 Test Apparatus, Microwave Radiation, AC Power Cords, (IEC 60227 flex), Oxygen Bomb, Endurance Test Apparatus (IEC 60384-14), Test Apparatus for Flammable Refrigerants, AP APG Tests (§ 37, 39, 41), ¿20 *Autoclave Tests (§ 44)¿, EO Sterilisation (§ 44), Gamma Sterilisation (§ 44), Power Measurements, ECG Performance, IR Irradiance, Vibration Test, Resistance to Corrosion, Water-borne Contaminants ¿ Salt Spray Test, Mechanical Strength (§ 21), Water-sulfur Dioxide Test, Compression Test, & Oil Immersion Test.
Accredit	Accreditation Granted	04/12/2021		9-114	60601-2-18: Edition 3.0 2009-08	Excluding the following measurements: Abrasion Resistance Test, Steel Pin, Concentration of Flammable Vapors, Softening Temperature (ISO 306), Ultrasonic Pressure, Capacitors and RC-units, Insulated Winding Wires, Methylated Spirits and Pressure Apparatus, Coated Printed Circuit Boards Test Apparatus (IEC 60664-3), CRT Strength, Ageing Test Apparatus for Elastomeric Parts, Partial Discharge Test (§2.10.5.4), UV Radiation, Bottom Fire Enclosure (hot flaming oil), Resistance to Ultra-violet Radiation, Resistance to Heat and Fire - ISO 9772 Test Apparatus, Microwave Radiation, AC Power Cords, (IEC 60227 flex), Oxygen Bomb, Endurance Test Apparatus (IEC 60384-14), Test Apparatus for Flammable Refrigerants, AP APG Tests (§ 37, 39, 41), ¿20 *Autoclave Tests (§ 44)¿, EO Sterilisation (§ 44), Gamma Sterilisation (§ 44), Power Measurements, ECG Performance, IR Irradiance, Vibration Test, Resistance to Corrosion, Water-borne Contaminants ¿ Salt Spray Test, Mechanical Strength (§ 21), Water-sulfur Dioxide Test, Compression Test, & Oil Immersion Test.
Accredit	Accreditation Granted	04/12/2021		9-119	60601-2-36 Edition 2.0 2014-04	Excluding the following measurements: Abrasion Resistance Test, Steel Pin, Concentration of Flammable Vapors, Softening Temperature (ISO 306), Ultrasonic Pressure, Capacitors and RC-units, Insulated Winding Wires, Methylated Spirits and Pressure Apparatus, Coated Printed Circuit Boards Test Apparatus (IEC 60664-3), CRT Strength, Ageing Test Apparatus for Elastomeric Parts, Partial Discharge Test (§2.10.5.4), UV Radiation, Bottom Fire Enclosure (hot flaming oil), Resistance to Ultra-violet Radiation, Resistance to Heat and Fire - ISO 9772 Test Apparatus, Microwave Radiation, AC Power Cords, (IEC 60227 flex), Oxygen Bomb, Endurance Test Apparatus (IEC 60384-14), Test Apparatus for Flammable Refrigerants, AP APG Tests (§ 37, 39, 41), ¿20 *Autoclave Tests (§ 44)¿, EO Sterilisation (§ 44), Gamma Sterilisation (§ 44), Power Measurements, ECG Performance, IR Irradiance, Vibration Test, Resistance to Corrosion, Water-borne Contaminants ¿ Salt Spray Test, Mechanical Strength (§ 21), Water-sulfur Dioxide Test, Compression Test, & Oil Immersion Test.
Delete	Administrative Deletion	05/24/2023		19-46	ES60601-1:2005/(R)2012 & A1:2012, C1:2009/(R)2012 & A2:2010/(R)2012 (Cons. Text) [Incl. AMD2:2021]

ASCA-Accredited Testing Laboratories

Links on this page:

Links on this page: