|
Date of Entry
|
Specialty Task Group Area
|
Recognition Number
|
Extent of Recognition
|
Standards Developing Organization
|
Standard Designation Number and Date
|
Standard Title (click for recognition information)
|
12/18/2023 |
Orthopedic |
11-405 |
Complete |
ASTM |
F1829-23 |
Standard Test Method for Static Evaluation of Anatomic Glenoid Locking Mechanism in Shear |
09/17/2018 |
Orthopedic |
11-334 |
Complete |
ASTM |
F1829-17 |
Standard Test Method for Static Evaluation of Anatomic Glenoid Locking Mechanism in Shear |
12/19/2022 |
ObGyn/ Gastroenterology/ Urology |
9-142 |
Complete |
ASTM |
D1894-14 |
Standard Test Method for Static and Kinetic Coefficients of Friction of Plastic Film and Sheeting |
12/21/2020 |
Materials |
8-545 |
Complete |
ASTM |
F2977-20 |
Standard Test Method for Small Punch Testing of Polymeric Biomaterials Used in Surgical Implants |
09/17/2018 |
Materials |
8-112 |
Complete |
ASTM |
F1044-05 (Reapproved 2017)e1 |
Standard Test Method for Shear Testing of Calcium Phosphate Coatings and Metallic Coatings |
09/17/2018 |
Materials |
8-380 |
Complete |
ASTM |
F1160-14 (Reapproved 2017)e1 |
Standard Test Method for Shear and Bending Fatigue Testing of Calcium Phosphate and Metallic Medical and Composite Calcium Phosphate/Metallic Coatings |
12/18/2023 |
Sterility |
14-596 |
Complete |
ASTM |
F88/F88M-23 |
Standard Test Method for Seal Strength of Flexible Barrier Materials |
05/30/2022 |
Sterility |
14-573 |
Complete |
ASTM |
F88/F88M-21 |
Standard Test Method for Seal Strength of Flexible Barrier Materials |
06/07/2021 |
Materials |
8-560 |
Complete |
ASTM |
D1415-18 |
Standard Test Method for Rubber Property - International Hardness |
06/07/2018 |
General Plastic Surgery/ General Hospital |
6-406 |
Complete |
ASTM |
F1862/F1862M-17 |
Standard Test Method for Resistance of Medical Face Masks to Penetration by Synthetic Blood (Horizontal Projection of Fixed Volume at a Known Velocity) |
06/07/2018 |
General Plastic Surgery/ General Hospital |
6-402 |
Complete |
ASTM |
F1670/F1670M-17 |
Standard Test Method for Resistance of Materials Used in Protective Clothing to Penetration by Synthetic Blood |
05/29/2023 |
General Plastic Surgery/ General Hospital |
6-491 |
Complete |
ASTM |
F1670/F1670M-17a |
Standard Test Method for Resistance of Materials Used in Protective Clothing to Penetration by Synthetic Blood |
01/30/2014 |
General Plastic Surgery/ General Hospital |
6-306 |
Complete |
ASTM |
F1671/F1671M-13 |
Standard Test Method for Resistance of Materials Used in Protective Clothing to Penetration by Blood-Borne Pathogens Using Phi-X174 Bacteriophage Penetration as a Test System |
05/29/2023 |
General Plastic Surgery/ General Hospital |
6-488 |
Complete |
ASTM |
F1671/F1671M-22 |
Standard Test Method for Resistance of Materials Used in Protective Clothing to Penetration by Blood-Borne Pathogens Using Phi-X174 Bacteriophage Penetration as a Test System |
07/06/2020 |
General Plastic Surgery/ General Hospital |
6-178 |
Partial |
ASTM |
D6124-06(2022) |
Standard Test Method for Residual Powder on Medical Gloves |
04/04/2016 |
Materials |
8-107 |
Complete |
ASTM |
F746-04 (Reapproved 2014) |
Standard Test Method for Pitting or Crevice Corrosion of Metallic Surgical Implant Materials |
05/29/2023 |
General Plastic Surgery/ General Hospital |
6-496 |
Partial |
ASTM |
F739-20 |
Standard Test Method for Permeation of Liquids and Gases Through Protective Clothing Materials Under Conditions of Continuous Contact |
07/09/2014 |
Sterility |
14-282 |
Complete |
ASTM |
F2338-09 (Reapproved 2020) |
Standard Test Method for Nondestructive Detection of Leaks in Packages by Vacuum Decay Method |
07/15/2019 |
Sterility |
14-532 |
Complete |
ASTM |
F3287-17e1 |
Standard Test Method for Nondestructive Detection of Leaks in Packages by Mass Extraction Method |
07/09/2014 |
Sterility |
14-433 |
Complete |
ASTM |
F2227-13 (Reapproved 2021) |
Standard Test Method for Non-Destructive Detection of Leaks in Non-sealed and Empty Packaging Trays by CO2 Tracer Gas Method |
07/09/2014 |
Sterility |
14-434 |
Complete |
ASTM |
F2228-13 (Reapproved 2021) |
Standard Test Method for Non-Destructive Detection of Leaks in Medical Packaging Which Incorporates Porous Barrier Material by C02 Tracer Gas Method |
05/30/2022 |
Sterility |
14-574 |
Complete |
ASTM |
F1608-21 |
Standard Test Method for Microbial Ranking of Porous Packaging Materials (Exposure Chamber Method) |
12/21/2020 |
Nanotechnology |
18-18 |
Complete |
ASTM |
E3247-20 |
Standard Test Method for Measuring the Size of Nanoparticles in Aqueous Media Using Dynamic Light Scattering |
12/23/2016 |
Sterility |
14-169 |
Complete |
ASTM |
F2391-05 (Reapproved 2016) |
Standard Test Method for Measuring Package and Seal Integrity Using Helium as the Tracer Gas |
05/29/2023 |
Sterility |
14-584 |
Complete |
ASTM |
F2391-22 |
Standard Test Method for Measuring Package and Seal Integrity Using Helium as the Tracer Gas |
09/17/2018 |
Orthopedic |
11-185 |
Complete |
ASTM |
F2267-04 (Reapproved 2018) |
Standard Test Method for Measuring Load Induced Subsidence of Intervertebral Body Fusion Device Under Static Axial Compression |
01/14/2019 |
Cardiovascular |
3-79 |
Complete |
ASTM |
F2079-09 (Reapproved 2017) |
Standard Test Method for Measuring Intrinsic Elastic Recoil of Balloon-Expandable Stents |
07/06/2020 |
Orthopedic |
11-363 |
Complete |
ASTM |
F897-19 |
Standard Test Method for Measuring Fretting Corrosion of Osteosynthesis Plates and Screws |
04/04/2016 |
Orthopedic |
11-304 |
Complete |
ASTM |
F3107-14 |
Standard Test Method for Measuring Accuracy after Mechanical Disturbances on Reference Frames of Computer Assisted Surgery Systems |
05/29/2023 |
Materials |
8-600 |
Complete |
ASTM |
F1978-22 |
Standard Test Method for Measuring Abrasion Resistance of Metallic Thermal Spray Coatings by Using the Taber Abraser |
09/17/2018 |
Materials |
8-467 |
Complete |
ASTM |
F1978-18 |
Standard Test Method for Measuring Abrasion Resistance of Metallic Thermal Spray Coatings by Using the Taber Abraser |
07/06/2020 |
Materials |
8-526 |
Complete |
ASTM |
F2182-19e2 |
Standard Test Method for Measurement of Radio Frequency Induced Heating On or Near Passive Implants During Magnetic Resonance |
04/04/2016 |
Materials |
8-415 |
Complete |
ASTM |
F2778-09 (Reapproved 2020) |
Standard Test Method for Measurement of Percent Crystallinity of Polyetheretherketone (PEEK) Polymers by Means of Specular Reflectance Fourier Transform Infrared Spectroscopy (R-FTIR) |
09/17/2018 |
Materials |
8-466 |
Complete |
ASTM |
F2213-17 |
Standard Test Method for Measurement of Magnetically Induced Torque on Medical Devices in the Magnetic Resonance Environment |
12/20/2021 |
Materials |
8-571 |
Complete |
ASTM |
F2052-21 |
Standard Test Method for Measurement of Magnetically Induced Displacement Force on Medical Devices in the Magnetic Resonance Environment |
04/04/2016 |
Materials |
8-404 |
Complete |
ASTM |
E647-15 |
Standard Test Method for Measurement of Fatigue Crack Growth Rates |
12/23/2016 |
Materials |
8-368 |
Complete |
ASTM |
F2625-10 (Reapproved 2016) |
Standard Test Method for Measurement of Enthalpy of Fusion, Percent Crystallinity, and Melting Point of Ultra-High-Molecular Weight Polyethylene by Means of Differential Scanning Calorimetry |
12/20/2021 |
Materials |
8-565 |
Complete |
ASTM |
F2754/F2754M-21 |
Standard Test Method for Measurement of Camber, Cast, Helix and Direction of Helix of Coiled Wire |
01/30/2014 |
Sterility |
14-400 |
Complete |
ASTM |
F2203-13 (Reapproved 2022) |
Standard Test Method for Linear Measurement Using Precision Steel Rule |
07/15/2019 |
Materials |
8-518 |
Complete |
ASTM |
F3306-19 |
Standard Test Method for Ion Release Evaluation of Medical Implants |
08/21/2017 |
Materials |
8-452 |
Complete |
ASTM |
F1635-16 |
Standard Test Method for in vitro Degradation Testing of Hydrolytically Degradable Polymer Resins and Fabricated Forms for Surgical Implants |
12/18/2023 |
Materials |
8-608 |
Complete |
ASTM |
F2214-23 |
Standard Test Method for In Situ Determination of Network Parameters of Crosslinked Ultra High Molecular Weight Polyethylene (UHMWPE) |
01/14/2019 |
General Plastic Surgery/ General Hospital |
6-411 |
Complete |
ASTM |
D6499-18 |
Standard Test Method for Immunological Measurement of Antigenic Protein in Hevea Natural Rubber (HNR) and its Products |
06/07/2018 |
General Plastic Surgery/ General Hospital |
6-214 |
Complete |
ASTM |
D6355-07(2022) |
Standard Test Method for Human Repeat Insult Patch Testing of Medical Gloves |
06/27/2016 |
Orthopedic |
11-308 |
Complete |
ASTM |
F3161-16 |
Standard Test Method for Finite Element Analysis (FEA) of Metallic Orthopaedic Total Knee Femoral Components under Closing Conditions |
12/19/2022 |
Orthopedic |
11-397 |
Complete |
ASTM |
F3210-22e1 |
Standard Test Method for Fatigue Testing of Total Knee Femoral Components Under Closing Conditions |
06/07/2021 |
Orthopedic |
11-382 |
Complete |
ASTM |
F3090-20 |
Standard Test Method for Fatigue Testing of Acetabular Devices for Total Hip Replacement |
09/17/2018 |
Materials |
8-468 |
Complete |
ASTM |
F2459-18 |
Standard Test Method for Extracting Residue from Metallic Medical Components and Quantifying via Gravimetric Analysis |
01/27/2015 |
Materials |
8-383 |
Complete |
ASTM |
F1926/F1926M-14 |
Standard Test Method for Evaluation of the Environmental Stability of Calcium Phosphate Granules, Fabricated Forms, and Coatings |
07/06/2020 |
Sterility |
14-549 |
Complete |
ASTM |
F3004-13 (Reapproved 2020) |
Standard Test Method for Evaluation of Seal Quality and Integrity Using Airborne Ultrasound |