|
|
|
Date of
Entry
|
Specialty Task
Group Area
|
Recognition
Number
|
Extent of
Recognition
|
Standards
Developing
Organization
|
Standard Designation
Number and Date
|
Standard Title
(click for recognition information)
|
| 07/15/2019 |
Anesthesiology |
1-143 |
Complete |
ISO |
80601-2-79 First edition 2018-07 |
Medical electrical equipment - Part 2-79: Particular requirements for basic safety and essential performance of ventilatory support equipment for ventilatory impairment |
| 01/14/2019 |
Dental/
ENT |
4-255 |
Complete |
ANSI ADA |
Standard No. 131-2015 (R2020) |
Dental CAD/CAM Machinable Zirconia Blanks |
| 07/15/2019 |
Orthopedic |
11-355 |
Complete |
ISO |
15142-1 First edition 2003-08-01 |
Implants for surgery - Metal intramedullary nailing systems - Part 1: Intramedullary nails |
| 12/23/2019 |
Dental/
ENT |
4-260 |
Complete |
ANSI ASA |
S12.2-2019 |
American National Standard for Criteria for Evaluating Room Noise |
| 07/15/2019 |
Ophthalmic |
10-118 |
Complete |
ANSI |
Z80.38-2017 (R2021) |
American National Standard for Ophthalmics - Light Hazard from Operation Microscopes Used in Ocular Surgery |
| 07/06/2020 |
Cardiovascular |
3-164 |
Complete |
ASTM |
F1830-19 |
Standard Practice for Collection and Preparation of Blood for Dynamic In Vitro Evaluation of Blood Pumps |
| 03/16/2012 |
Radiology |
12-115 |
Complete |
ISO |
13695:2004 |
Optics and photonics - Lasers and laser-related equipment - Test methods for the spectral characteristics of lasers |
| 12/23/2016 |
Radiology |
12-303 |
Complete |
IEC |
61303 Edition 1.0 1994-09 |
Medical electrical equipment - Radionuclide calibrators - Particular methods for describing performance [Including CORRIGENDUM 1 (2016)] |
| 12/23/2016 |
Radiology |
12-304 |
Complete |
IEC |
60731 Edition 3.1 2016-04 |
Consolidated Version Medical electrical equipment - Dosimeters with ionization chambers as used in radiotherapy |
| 09/09/2008 |
Software/
Informatics |
13-18 |
Complete |
CLSI |
LIS03-A |
Standard Guide for Selection of a Clinical Laboratory Information Management System |
| 12/23/2019 |
Materials |
8-492 |
Complete |
ISO |
5832-9 Third edition 2019-02 |
Implants for surgery - Metallic materials - Part 9: Wrought high nitrogen stainless steel |
| 06/07/2021 |
Orthopedic |
11-384 |
Complete |
ASTM |
F3446-20 |
Standard Test Method for Determination of Frictional Torque and Friction Factor for Hip Implants Using an Anatomical Motion Hip Simulator |
| 06/07/2021 |
Orthopedic |
11-379 |
Complete |
ASTM |
F2978-20 |
Standards Guide to Optimize Scan Sequences for Clinical Diagnostic Evaluation of Metal-on-Metal Hip Arthroplasty Devices using Magnetic Resonance Imaging |
| 03/16/2012 |
Radiology |
12-241 |
Complete |
IEC |
62274 First Edition 2005-05 |
Medical electrical equipment - Safety of radiotherapy record and verify systems |
| 08/06/2013 |
Radiology |
12-253 |
Complete |
IEC |
60976 Edition 2.0 2007-10 |
Medical electrical equipment - Medical electron accelerators - Functional performance characteristics |
| 08/06/2013 |
Radiology |
12-255 |
Complete |
IEC |
60601-2-11 Edition 3.0 2013-01 |
Medical electrical equipment - Part 2-11: Particular requirements for the basic safety and essential performance of gamma beam therapy equipment |
| 08/21/2017 |
Software/
Informatics |
13-94 |
Complete |
ISO IEEE |
11073-10424 First edition 2016-06-15 |
Health informatics - Personal health device communication - Part 10424: Device specialization - Sleep Apnoea Breathing Therapy Equipment (SABTE) [Including TECHNICAL CORRIGENDUM 1 (2018)] |
| 08/06/2013 |
Software/
Informatics |
13-49 |
Complete |
ISO IEEE |
11073-20101 First edition 2004-12-15 |
Health informatics - Point-of-care medical device communication - Part 20101: Application Profiles - Base Standard |
| 07/09/2014 |
Radiology |
12-275 |
Complete |
IEC |
61161 Edition 3.0 2013-01 |
Ultrasonics -- Power measurement -- Radiation force balances and performance requirements |
| 07/09/2014 |
Radiology |
12-280 |
Complete |
IEC |
62555 Edition 1.0 2013-11 |
Ultrasonics -- Power measurement -- High intensity therapeutic ultrasound (HITU) transducers and systems |
| 07/09/2014 |
Radiology |
12-281 |
Complete |
IEC |
60601-2-62 Edition 1.0 2013-07 |
Medical electrical equipment - Part 2-62: Particular requirements for the basic safety and essential performance of high intensity therapeutic ultrasound (HITU) equipment |
| 07/06/2020 |
ObGyn/
Gastroenterology/
Urology |
9-129 |
Complete |
ISO CIE |
61966-2-1 First edition 1999-10 |
Multimedia systems and equipment - Colour measurement and management - Part 2-1: Colour management - Default RGB colour space - sRGB [Including: Amendment 1 (2003) and Corrigendum 1 (2014)] |
| 09/09/2008 |
Radiology |
12-166 |
Complete |
NEMA |
XR 23-2006 (R2020) |
"Quality Control Manual" Template for Manufacturers of Hardcopy Output Devices Labeled for Final Interpretation in Full-field Digital Mammography |
| 10/04/2010 |
Radiology |
12-213 |
Complete |
IEC |
62220-1-2 Edition 1.0 2007-06 |
Medical electrical equipment - Characteristics of digital X-ray imaging devices - Part 1-2: Determination of the detective quantum efficiency - Detectors used in mammography |
| 10/04/2010 |
Radiology |
12-214 |
Complete |
IEC |
62220-1-3 Edition 1.0 2008-06 |
Medical electrical equipment - Characteristics of digital X-ray imaging devices - Part 1-3: Determination of the detective quantum efficiency - Detectors used in dynamic imaging |
| 07/09/2014 |
Radiology |
12-283 |
Complete |
ISO |
12609-2 First edition 2013-07-15 |
Eyewear for protection against intense light sources used on humans and animals for cosmetic and medical applications -- Part 2: Guidance for use |
| 08/14/2015 |
Radiology |
12-290 |
Complete |
IEC |
61910-1 Edition 1.0 2014-09 |
Medical electrical equipment - Radiation dose documentation - Part 1: Radiation dose structured reports for radiography and radioscopy |
| 07/15/2019 |
Materials |
8-493 |
Complete |
ISO |
13779-2 Third edition 2018-12 |
Implants for surgery - Hydroxyapatite - Part 2: Thermally sprayed coatings of hydroxyapatite |
| 06/07/2021 |
General Plastic Surgery/
General Hospital |
6-463 |
Complete |
IEC |
60601-2-21 Edition 3.0 2020-09 |
Medical electrical equipment - Part 2-21: Particular requirements for the basic safety and essential performance of infant radiant warmers |
| 07/06/2020 |
General I (QS/
RM) |
5-127 |
Complete |
ISTA |
3B 2017 |
Packaged-Products for Less-Than-Truckload (LTL) Shipment |
| 07/06/2020 |
General I (QS/
RM) |
5-128 |
Complete |
ISTA |
3E 2017 |
Similar Packaged-Products in Unitized Loads of Truckload Shipment |
| 06/07/2021 |
InVitro Diagnostics |
7-307 |
Complete |
CLSI |
POCT05 2nd Edition |
Performance Metrics for Continuous Interstitial Glucose Monitoring |
| 06/07/2021 |
Orthopedic |
11-383 |
Complete |
ASTM |
F3143-20 |
Standard Test Method for Determination of Frictional Torque and Friction Factor for Hip Replacement Bearings under Standard Conditions Using a Reciprocal Friction Simulator |
| 12/23/2019 |
Materials |
8-494 |
Complete |
ISO |
6474-1 Second edition 2019-03 |
Implants for surgery - Ceramic materials - Part 1: Ceramic materials based on high purity alumina |
| 12/23/2019 |
Materials |
8-520 |
Complete |
ASTM |
F799-19 |
Standard Specification for Cobalt-28 Chromium-6 Molybdenum Alloy Forgings for Surgical Implants (UNS R31537, R31538, R31539) |
| 12/21/2020 |
Sterility |
14-554 |
Complete |
ASTM |
F17-20 |
Standard Terminology Relating to Flexible Barrier Packaging |
| 12/23/2019 |
General Plastic Surgery/
General Hospital |
6-424 |
Complete |
ASTM |
D5151-19(2023) |
Standard Test Method for Detection of Holes in Medical Gloves |
| 03/16/2012 |
Cardiovascular |
3-96 |
Complete |
ISO |
81060-1 First edition 2007-12-01 |
Non-invasive sphygmomanometers - Part 1: Requirements and test methods for non-automated measurement type |
| ANSI AAMI ISO |
81060-1:2007/(R)2013 |
Non-invasive sphygmomanometers - Part 1: Requirements and test methods for non-automated measurement type |
| 04/04/2016 |
Dental/
ENT |
4-222 |
Complete |
ISO |
6874 Third edition 2015-09-01 |
Dentistry - Polymer-based pit and fissure sealants |
| 09/09/2008 |
Software/
Informatics |
13-19 |
Complete |
CLSI |
LIS04-A |
Standard Guide for Documentation of Clinical Laboratory Computer Systems |
| 08/20/2012 |
InVitro Diagnostics |
7-76 |
Complete |
CLSI |
M15-A (Replaces M15-T) |
Laboratory Diagnosis of Blood-borne Parasitic Diseases; Approved Guideline |
| 01/27/2015 |
ObGyn/
Gastroenterology/
Urology |
9-45 |
Complete |
ASTM |
F2528-06(2023) |
Standard Test Methods for Enteral Feeding Devices with a Retention Balloon |
| 08/02/2011 |
InVitro Diagnostics |
7-219 |
Complete |
CLSI |
I/LA28-A2 |
Quality Assurance for Design Control and Implementation of Immunohistochemistry Assays; Approved Guidelines-Second Edition. |
| 08/21/2017 |
General II (ES/
EMC) |
19-22 |
Complete |
AAMI |
TIR69:2017/(R2020) |
Technical Information Report Risk management of radio-frequency wireless coexistence for medical devices and systems. |
| 06/07/2018 |
General Plastic Surgery/
General Hospital |
6-214 |
Complete |
ASTM |
D6355-07(2022) |
Standard Test Method for Human Repeat Insult Patch Testing of Medical Gloves |
| 01/30/2014 |
Sterility |
14-395 |
Complete |
ISO |
14698-2 First edition 2003-09-15 |
Cleanrooms and Associated Controlled Environments - Biocontamination Control - Part 2: Evaluation and Interpretation of Biocontamination Data [Including: Technical Corrigendum 1 (2004)] |
| 08/06/2013 |
Orthopedic |
11-252 |
Complete |
ISO |
5838-1 Third edition 2013-03-01 |
Implants for surgery -- Metallic skeletal pins and wires -- Part 1: General requirements |
| 06/07/2018 |
Radiology |
12-316 |
Complete |
IEC |
62359 Edition 2.1 2017-09 CONSOLIDATED VERSION |
Ultrasonics - Field characterization - Test methods for the determination of thermal and mechanical indices related to medical diagnostic ultrasonic fields |
| 07/06/2020 |
Software/
Informatics |
13-114 |
Complete |
IEEE |
Std 11073-10101-2019 |
Health informatics - Point-of-care medical device communication. Part 10101: Nomenclature |
| 07/06/2020 |
Software/
Informatics |
13-115 |
Complete |
ISO IEC IEEE |
29119-1 First edition 2013-09-01 |
Software and systems engineering - Software testing - Part 1: Concepts and definitions |
| 01/14/2019 |
Software/
Informatics |
13-106 |
Complete |
IEEE |
Std 11073-10207-2017 |
Health informatics - Point-of-care medical device communication Part 10207: Domain Information and Service Model for Service-Oriented Point-of-Care Medical Device Communication |
| 06/27/2016 |
Software/
Informatics |
13-84 |
Complete |
ISO IEEE |
11073-10103 First edition 2014-03-01 |
Health informatics - Point-of-care medical device communication - Part 10103: Nomenclature - Implantable device, cardiac |
| 08/14/2015 |
InVitro Diagnostics |
7-257 |
Complete |
CLSI |
M56-A |
Principles and procedures for Detection of Anaerobes in Clinical Specimens; Approved Guideline |
| 01/27/2015 |
Materials |
8-383 |
Complete |
ASTM |
F1926/F1926M-14 |
Standard Test Method for Evaluation of the Environmental Stability of Calcium Phosphate Granules, Fabricated Forms, and Coatings |
| 03/16/2012 |
General Plastic Surgery/
General Hospital |
6-272 |
Complete |
ASTM |
F2062-00 (Reapproved 2018) |
Standard Specification for Square Drive Interconnections on Surgical Instruments |
| 12/20/2021 |
Materials |
8-574 |
Complete |
ASTM |
F2820-12(2021)e1 |
Standard Specification for Polyetherketoneketone (PEKK) Polymers for Surgical Implant Applications |
| 12/20/2021 |
Materials |
8-575 |
Complete |
ASTM |
F3160-21 |
Standard Guide for Metallurgical Characterization of Absorbable Metallic Materials for Medical Implants |
| 12/20/2021 |
Materials |
8-576 |
Complete |
ASTM |
F451-21 |
Standard Specification for Acrylic Bone Cement |
| 07/06/2020 |
Sterility |
14-549 |
Complete |
ASTM |
F3004-13 (Reapproved 2020) |
Standard Test Method for Evaluation of Seal Quality and Integrity Using Airborne Ultrasound |
| 07/15/2019 |
Sterility |
14-528 |
Complete |
ISO |
11137-1 First edition 2006-04-15 |
Sterilization of health care products - Radiation - Part 1: Requirements for development, validation and routine control of a sterilization process for medical devices [Including: Amendment 1 (2013) and Amendment 2 (2018)] |
| ANSI AAMI ISO |
11137-1:2006/(R)2015 |
Sterilization of health care products - Radiation - Part 1: Requirements for development, validation, and routine control of a sterilization process for medical devices [Including: Amendment 1 (2013) and Amendment 2 (2019)] |
| 12/23/2019 |
General I (QS/
RM) |
5-125 |
Complete |
ISO |
14971 Third Edition 2019-12 |
Medical devices - Application of risk management to medical devices |
| ANSI AAMI ISO |
14971: 2019 |
Medical devices - Applications of risk management to medical devices |
| 07/15/2019 |
Materials |
8-503 |
Complete |
ASTM |
F2042-18 |
Standard Guide for Silicone Elastomers, Gels, and Foams Used in Medical Applications - Part II - Crosslinking and Fabrication |
| 07/15/2019 |
Materials |
8-509 |
Complete |
ASTM |
F702-18 |
Standard Specification for Polysulfone Resin for Medical Applications |
| 12/19/2022 |
Sterility |
14-580 |
Complete |
ISO |
11137-2 Third edition 2013-06 [Including AMD1:2022] |
Sterilization of health care products - Radiation - Part 2: Establishing the sterilization dose [Including Amendment 1 (2022)] |
| 12/20/2021 |
Cardiovascular |
3-178 |
Complete |
ASTM |
F3067-14 (Reapproved 2021) |
Standard Guide for Radial Loading of Balloon-Expandable and Self-Expanding Vascular Stents |
| 12/20/2021 |
Dental/
ENT |
4-292 |
Complete |
ISO |
28888 First edition 2013-10 |
Dentistry - Screening method for erosion potential of oral rinses on dental hard tissues |
| ANSI ADA |
Standard No. 151-2015 (R2020) |
Screening Method for Erosion Potential of Oral Rinses on Dental Hard Tissues |
| 12/23/2019 |
Physical Medicine |
16-228 |
Complete |
RESNA ANSI |
WC-4:2017 Section 19 |
American National Standard for Wheelchairs - Volume 4: Wheelchairs and Transportation Section 19: Wheelchairs used as seats in motor vehicles. |
| 07/15/2019 |
Materials |
8-504 |
Complete |
ASTM |
F561-19 |
Standard Practice for Retrieval and Analysis of Medical Devices, and Associated Tissues and Fluids |
| 07/06/2020 |
ObGyn/
Gastroenterology/
Urology |
9-126 |
Complete |
ISO CIE |
11664-3 First edition 2019-06 |
Colorimetry - Part 3: CIE tristimulus values |
| 07/06/2020 |
Cardiovascular |
3-167 |
Complete |
ISO |
TS 81060-5 First edition 2020-02 |
Non-invasive sphygmomanometers - Part 5: Requirements for the repeatability and reproducibility of NIBP simulators for testing of automated non-invasive sphygmomanometers |
| 12/23/2019 |
Radiology |
12-328 |
Complete |
IEC |
61223-3-5 Edition 2.0 2019-09 |
Evaluation and routine testing in medical imaging departments - Part 3-5: Acceptance tests - Imaging performance of computed tomography X-ray equipment [Including: Technical Corrigendum 1 (2006)] |
| 01/14/2019 |
Radiology |
12-324 |
Complete |
ISO |
13694 Third edition 2018-11 |
Optics and Photonics - Lasers and laser-related equipment - Test methods for laser beam power (energy) density distribution |
| 01/14/2019 |
General I (QS/
RM) |
5-122 |
Complete |
ASME |
V&V 40-2018 |
Assessing Credibility of Computational Modeling Through Verification and Validation: Application to Medical Devices |
| 01/14/2019 |
Dental/
ENT |
4-163 |
Complete |
ANSI ASA |
S3.5-1997 (Reaffirmed 2020) |
American National Standard Methods for Calculation of the Speech Intelligibility Index |
| 07/06/2020 |
InVitro Diagnostics |
7-298 |
Complete |
CLSI |
EP35, 1st Edition |
Assessment of Equivalence or Suitability of Specimen Types for Medical Laboratory Measurement Procedures |
| 01/14/2019 |
Ophthalmic |
10-114 |
Complete |
ANSI |
Z80.28-2017 |
American National Standard for Ophthalmics - Methods of Reporting Optical Aberrations of Eyes |
| 01/14/2019 |
Ophthalmic |
10-115 |
Complete |
ANSI |
Z80.29-2015 (R2020) |
American National Standard for Ophthalmics - Accomodative Intraocular Lenses |
| 07/06/2020 |
Biocompatibility |
2-275 |
Complete |
ISO |
10993-7 Second edition 2008-10-15 |
Biological evaluation of medical devices - Part 7: Ethylene oxide sterilization residuals [Including: Technical Corrigendum 1 (2009), AMENDMENT 1: Applicability of allowable limits for neonates and infants (2019)] |
| 12/21/2020 |
General II (ES/
EMC) |
19-37 |
Complete |
IEC |
60601-1-10 Edition 1.2 2020-07 CONSOLIDATED VERSION |
Medical electrical equipment - Part 1-10: General requirements for basic safety and essential performance - Collateral Standard: Requirements for the development of physiologic closed-loop controllers |
| 06/07/2021 |
Dental/
ENT |
4-277 |
Complete |
ANSI IEEE |
C63.19-2019 |
American National Standard Methods of Measurement of Compatibility between Wireless Communication Devices and Hearing Aids |
| 07/15/2019 |
Orthopedic |
11-356 |
Complete |
ISO |
15142-2 First edition 2003-08-01 |
Implants for surgery - Metal intramedullary nailing systems - Part 2: Locking components |
| 08/06/2013 |
Dental/
ENT |
4-204 |
Complete |
ANSI ASA |
S3.42-2012/Part 2/ IEC 60118-15:2012 (R2020) |
American National Standard Testing Hearing Aids - Part 2: Methods for characterizing signal processing in hearing aids with a speech-like signal (a nationally adopted international standard) |
| 12/23/2016 |
Software/
Informatics |
13-87 |
Complete |
ISO IEC |
15026-2 First edition 2011-02-15 |
Systems and software engineering - Systems and software assurance - Part 2: Assurance case |
| 12/20/2021 |
Dental/
ENT |
4-291 |
Complete |
ISO |
28399 First edition 2011-01 |
Dentistry - Products for external tooth bleaching |
| ANSI ADA |
Standard No. 136-2015 (R2020) |
Products for External Tooth Bleaching |
| 12/20/2021 |
Sterility |
14-565 |
Complete |
USP-NF |
M98802_01_01 |
<62> Microbiological Examination of Nonsterile Products: Tests for Specified Microorganisms |
| 12/23/2019 |
Software/
Informatics |
13-111 |
Complete |
IEEE |
Std 11073-10201-2018 |
Health informatics - Point-of-care medical device communication Part 10201: Domain Information Model |
| 06/07/2021 |
Orthopedic |
11-376 |
Complete |
ASTM |
F2033-20 |
Standard Specification for Total Hip Joint Prosthesis and Hip Endoprosthesis Bearing Surfaces Made of Metallic, Ceramic, and Polymeric Materials |
| 08/21/2017 |
Software/
Informatics |
13-96 |
Complete |
UL ANSI |
2900-1 First Edition 2017 |
Standard for Safety, Standard for Software Cybersecurity Network-Connectable Products, Part 1: General Requirements |
| 12/21/2020 |
Nanotechnology |
18-18 |
Complete |
ASTM |
E3247-20 |
Standard Test Method for Measuring the Size of Nanoparticles in Aqueous Media Using Dynamic Light Scattering |
| 06/27/2016 |
General Plastic Surgery/
General Hospital |
6-363 |
Complete |
ISO |
11810 Second edition 2015-12-15 |
Lasers and laser-related equipment - Test method and classification for the laser-resistance of surgical drapes and/or patient-protective covers - Primary ignition, penetration, flame spread and secondary ignition |
| 01/27/2015 |
Sterility |
14-390 |
Complete |
ISO |
14644-10 First edition 2013-03-01 |
Cleanrooms and associated controlled environments - Part 10: Classification of surface cleanliness by chemical concentration |
| 12/23/2019 |
Dental/
ENT |
4-262 |
Complete |
IEC |
80601-2-60 Edition 2.0 2019-06 |
Medical electrical equipment - Part 2-60: Particular requirements for the basic safety and essential performance of dental equipment |
| 12/23/2019 |
Materials |
8-498 |
Complete |
ASTM |
F75-18 |
Standard Specification for Cobalt-28 Chromium-6 Molybdenum Alloy Castings and Casting Alloy for Surgical Implants (UNS R30075) |
| 12/23/2019 |
Materials |
8-499 |
Complete |
ASTM |
F1580-18 |
Standard Specification for Titanium and Titanium-6 Aluminum-4 Vanadium Alloy Powders for Coatings of Surgical Implants |
| 12/23/2019 |
Materials |
8-500 |
Complete |
ISO |
5832-12 Third edition 2019-02 |
Implants for surgery - Metallic materials - Part 12: Wrought cobalt-chromium-molybdenum alloy |
| 07/06/2020 |
Materials |
8-536 |
Complete |
ISO ASTM |
52902:First Edition 2019-07 |
Additive Manufacturing -Test Artifacts - Geometric capability assessment of additive manufacturing systems |
| 12/21/2020 |
Dental/
ENT |
4-264 |
Complete |
ISO |
9333 Second edition 2006-07 |
Dentistry - Brazing materials |
| ANSI ADA |
Standard No. 88-2019 |
Dental Brazing Alloys |
| 07/06/2020 |
Materials |
8-532 |
Complete |
ASTM |
F3335-20 |
Standard Guide for Assessing the Removal of Additive Manufacturing Residues in Medical Devices Fabricated by Powder Bed Fusion |
| 07/06/2020 |
Materials |
8-533 |
Complete |
ISO ASTM |
52907: First Edition 2019-11 |
Additive Manufacturing - Feedstock materials - Methods to characterize metal powders |
| 07/06/2020 |
Tissue Engineering |
15-59 |
Complete |
ASTM |
F2450-18 |
Standard Guide for Assessing Microstructure of Polymeric Scaffolds for Use in Tissue-Engineered Medical Products |
![Sort by Date [Old to new]](/scripts/cdrh/images/arrow_up-black.GIF){kind=icon}
![Sort by Date [New to old]](/scripts/cdrh/images/arrow_down-black.GIF){kind=icon}
