|
|
|
Date of
Entry
|
Specialty Task
Group Area
|
Recognition
Number
|
Extent of
Recognition
|
Standards
Developing
Organization
|
Standard Designation
Number and Date
|
Standard Title
(click for recognition information)
|
| 01/30/2014 |
Radiology |
12-266 |
Complete |
IEC |
61689 Edition 3.0 2013-02 |
Ultrasonics - Physiotherapy systems - Field specifications and methods of measurement in the frequency range 0.5 MHz to 5 MHz |
| 04/04/2016 |
Materials |
8-404 |
Complete |
ASTM |
E647-15 |
Standard Test Method for Measurement of Fatigue Crack Growth Rates |
| 04/04/2016 |
Materials |
8-406 |
Complete |
ISO |
5832-11 Second edition 2014-09-15 |
Implants for surgery -- Metallic materials -- Part 11: Wrought titanium 6-aluminium 7-niobium alloy |
| 04/04/2016 |
ObGyn/
Gastroenterology/
Urology |
9-110 |
Complete |
ISO |
8600-1 Fourth Edition 2015-10-15 |
Endoscopes - Medical endoscopes and endotherapy devices -- Part 1: General requirements |
| 04/04/2016 |
InVitro Diagnostics |
7-260 |
Complete |
CLSI |
MM03-3rd Edition (Replaces MM03-A2) |
Molecular Diagnostic Methods for Infectious Diseases; Approved Guideline |
| 04/04/2016 |
Materials |
8-107 |
Complete |
ASTM |
F746-04 (Reapproved 2014) |
Standard Test Method for Pitting or Crevice Corrosion of Metallic Surgical Implant Materials |
| 04/04/2016 |
Materials |
8-115 |
Complete |
ASTM |
F2256-05 (Reapproved 2015) |
Standard Test Method for Strength Properties of Tissue Adhesives in T-Peel by Tension Loading |
| 03/14/2011 |
Radiology |
12-226 |
Complete |
IEC |
61223-2-6 Second Edition 2006-11 |
Evaluation and routine testing in medical imaging departments - Part 2-6: Constancy tests - Imaging performance of computed tomography X-ray equipment |
| 06/07/2021 |
Cardiovascular |
3-170 |
Complete |
ISO |
14708-5 Second edition 2020-05 |
Implants for surgery - Active implantable medical devices - Part 5: Circulatory support devices |
| 07/06/2020 |
Biocompatibility |
2-275 |
Complete |
ISO |
10993-7 Second edition 2008-10-15 |
Biological evaluation of medical devices - Part 7: Ethylene oxide sterilization residuals [Including: Technical Corrigendum 1 (2009), AMENDMENT 1: Applicability of allowable limits for neonates and infants (2019)] |
| 09/17/2018 |
Materials |
8-470 |
Complete |
ASTM |
F2102-17 |
Standard Guide for Evaluating the Extent of Oxidation in Polyethylene Fabricated Forms Intended for Surgical Implants |
| 06/07/2018 |
Tissue Engineering |
15-51 |
Complete |
ASTM |
F2347-15 |
Standard Guide for Characterization and Testing of Hyaluronan as Starting Materials Intended for Use in Biomedical and Tissue Engineered Medical Product Applications |
| 06/07/2018 |
Tissue Engineering |
15-52 |
Complete |
ASTM |
F2064-17 |
Standard Guide for Characterization and Testing of Alginates as Starting Materials Intended for Use in Biomedical and Tissue Engineered Medical Product Applications |
| 06/07/2018 |
Materials |
8-113 |
Complete |
ASTM |
F1147-05 (Reapproved 2017)e1 |
Standard Test Method for Tension Testing of Calcium Phosphate and Metallic Coatings |
| 12/19/2022 |
Software/
Informatics |
13-128 |
Complete |
IEEE UL |
Std 2621.2-2022 |
Standard for Wireless Diabetes Device Security: Information Security Requirements for Connected Diabetes Solutions |
| 12/23/2016 |
Orthopedic |
11-312 |
Complete |
ISO |
7206-4 Third edition 2010-06-15 |
Implants for surgery - Partial and total hip joint prostheses - Part 4: Determination of endurance properties and performance of stemmed femoral components [Including AMENDMENT 1 (2016)] |
| 12/23/2016 |
Orthopedic |
11-314 |
Complete |
ISO |
14242-2 Second edition 2016-09-15 |
Implants for surgery - Wear of total hip-joint prostheses - Part 2: Methods of measurement |
| 12/23/2016 |
Orthopedic |
11-316 |
Complete |
ASTM |
F1264-16 |
Standard Specification and Test Methods for Intramedullary Fixation Devices |
| 08/21/2017 |
Materials |
8-457 |
Complete |
ISO |
13175-3 First edition 2012-10-01 |
Implants for surgery -- Calcium phosphates -- Part 3: Hydroxyapatite and beta-tricalcium phosphate bone substitutes |
| 12/20/2021 |
Materials |
8-565 |
Complete |
ASTM |
F2754/F2754M-21 |
Standard Test Method for Measurement of Camber, Cast, Helix and Direction of Helix of Coiled Wire |
| 12/20/2021 |
Sterility |
14-571 |
Complete |
ISO |
11138-8 First edition 2021-07 |
Sterilization of health care products - Biological indicators - Part 8: Method for validation of a reduced incubation time for a biological indicator |
| 01/27/2015 |
Sterility |
14-456 |
Complete |
ANSI AAMI ISO |
TIR16775:2014 |
Packaging for terminally sterilized medical devices - Guidance on the application of ISO 11607-1 and ISO 11607-2 |
| ISO |
TS 16775 First edition 2014-05-15 |
Packaging for terminally sterilized medical devices - Guidance on the application of ISO 11607-1 and ISO 11607-2 |
| 12/21/2020 |
Dental/
ENT |
4-265 |
Complete |
ISO |
10271 Third edition 2020-08 |
Dentistry - Corrosion test methods for metallic materials |
| ANSI ADA |
Standard No. 97-2020 |
Corrosion Test Methods for Metallic Materials |
| 01/14/2019 |
General Plastic Surgery/
General Hospital |
6-411 |
Complete |
ASTM |
D6499-18 |
Standard Test Method for Immunological Measurement of Antigenic Protein in Hevea Natural Rubber (HNR) and its Products |
| 01/14/2019 |
Cardiovascular |
3-157 |
Complete |
ANSI AAMI ISO |
25539-1: 2017 |
Cardiovascular implants - Endovascular devices - Part 1: Endovascular prostheses |
| 12/19/2022 |
Nanotechnology |
18-21 |
Complete |
ISO |
TS 80004-6 Second edition 2021-03 |
Nanotechnologies - Vocabulary - Part 6: Nano-object characterization |
| 12/18/2023 |
Sterility |
14-591 |
Complete |
ISO |
14644-10 Second edition 2022-05 |
Cleanrooms and associated controlled environments - Part 10: Assessment of surface cleanliness for chemical contamination |
| 12/23/2016 |
InVitro Diagnostics |
7-267 |
Complete |
CLSI |
C24 4th Edition (Replaces C24-A3) |
Statistical Quality Control for Quantitative Measurement Procedures: Principles and Definitions |
| 05/30/2022 |
Materials |
8-584 |
Complete |
ASTM |
F2146-22 |
Standard Specification for Wrought Titanium-3Aluminum-2.5Vanadium Alloy Seamless Tubing for Surgical Implant Applications (UNS R56320) |
| 05/30/2022 |
Materials |
8-585 |
Complete |
ASTM |
F1377-21 |
Standard Specification for Cobalt-28Chromium-6Molybdenum Powder for Medical Devices (UNS R30075, UNS R31537, and UNS R31538) |
| 05/30/2022 |
Materials |
8-586 |
Complete |
ASTM |
F2989-21 |
Standard Specification for Metal Injection Molded Unalloyed Titanium Components for Surgical Implant Applications |
| 12/20/2021 |
Materials |
8-570 |
Complete |
ASTM |
F1108-21 |
Standard Specification for Titanium-6Aluminum-4Vanadium Alloy Castings for Surgical Implants (UNS R56406) |
| 01/14/2019 |
Orthopedic |
11-347 |
Complete |
ASTM |
F2077-18 |
Test Methods for Intervertebral Body Fusion Devices |
| 04/04/2016 |
Tissue Engineering |
15-24 |
Complete |
ASTM |
F2721-09 (Reapproved 2014) |
Standard Guide for Pre-clinical in vivo Evaluation in Critical Size Segmental Bone Defects |
| 09/09/2008 |
Software/
Informatics |
13-13 |
Complete |
CLSI |
AUTO5-A |
Laboratory Automation: Electromechanical Interfaces; Approved Standard |
| 12/21/2020 |
InVitro Diagnostics |
7-304 |
Complete |
CLSI |
M23 5th Edition |
Development of In Vitro Susceptibility Testing Criteria and Quality Control Parameters |
| 07/15/2019 |
Sterility |
14-531 |
Complete |
ISO |
11607-2 Second edition 2019-02 |
Packaging for terminally sterilized medical devices - Part 2: Validation requirements for forming, sealing and assembly processes |
| ANSI AAMI ISO |
11607-2:2019 |
Packaging for terminally sterilized medical devices - Part 2: Validation requirements for forming, sealing and assembly processes |
| 12/18/2023 |
Sterility |
14-596 |
Complete |
ASTM |
F88/F88M-23 |
Standard Test Method for Seal Strength of Flexible Barrier Materials |
| 01/27/2015 |
Sterility |
14-390 |
Complete |
ISO |
14644-10 First edition 2013-03-01 |
Cleanrooms and associated controlled environments - Part 10: Classification of surface cleanliness by chemical concentration |
| 03/16/2012 |
Tissue Engineering |
15-31 |
Complete |
ASTM |
F2312-11 (Reapproved 2020) |
Standard Terminology Relating to Tissue Engineered Medical Products |
| 04/04/2016 |
Materials |
8-401 |
Complete |
ASTM |
F2118-14 (Reapproved 2020) |
Standard Test Method for Constant Amplitude of Force Controlled Fatigue Testing of Acrylic Bone Cement Materials |
| 12/23/2016 |
Software/
Informatics |
13-86 |
Complete |
ISO IEC |
15026-1 First edition 2013-11-01 |
Systems and software engineering - Systems and software assurance - Part 1: Concepts and vocabulary |
| 12/18/2023 |
Sterility |
14-592 |
Complete |
ISO |
13408-1 Third edition 2023-08 |
Aseptic processing of health care products - Part 1: General requirements |
| 05/29/2024 |
Software/
Informatics |
13-135 |
Complete |
ISO IEEE |
11073-10407 Second edition 2022-12 |
Health informatics - Personal health device communication - Part 10407: Device Specialization - Blood pressure monitor |
| 08/06/2013 |
Software/
Informatics |
13-52 |
Complete |
ISO IEEE |
11073-10408 First edition 2010-05-01 |
Health informatics - Point-of-care medical device communication - Part 10408: Device specialization - Thermometer |
| 01/25/2013 |
Cardiovascular |
3-89 |
Complete |
ISO |
27186 First edition 2010-03-15 |
Active implantable medical devices - Four-pole connector system for implantable cardiac rhythm management devices - Dimensional and test requirements |
| ANSI AAMI ISO |
27186:2010 |
Active implantable medical devices - Four-pole connector system for implantable cardiac rhythm management devices - Dimensional and test requirements |
| 12/23/2016 |
Orthopedic |
11-317 |
Complete |
ASTM |
F3129-16 |
Standard Guide for Characterization of Material Loss from Conical Taper Junctions in Total Joint Prostheses |
| 12/19/2022 |
Nanotechnology |
18-22 |
Complete |
ISO |
17200 First edition 2020-09 |
Nanotechnology - Nanoparticles in powder form - Characteristics and measurements |
| 08/21/2017 |
Software/
Informatics |
13-89 |
Complete |
ISO IEEE |
11073-10406 First edition 2012-12-01 |
Health informatics - Personal health device communication - Part 10406: Device specialization - Basic electrocardiograph (ECG) (1- to 3-lead ECG) |
| 05/29/2024 |
Software/
Informatics |
13-133 |
Complete |
ISO IEEE |
11073-10415 Second edition 2022-12 |
Health informatics - Point-of-care medical device communication - Part 10415: Device specialization - Weighing scale |
| 12/18/2023 |
Orthopedic |
11-403 |
Complete |
ASTM |
F3047M-23 |
Standard Guide for High Demand Hip Simulator Wear Testing of Hard-on-Hard Articulations |
| 08/21/2017 |
Dental/
ENT |
4-239 |
Complete |
ANSI AAMI |
CI86:2017 |
Cochlear implant systems: Requirements for safety, functional verification, labeling and reliability reporting |
| 01/14/2019 |
Biocompatibility |
2-141 |
Complete |
ASTM |
F1984-99 (Reapproved 2018) |
Standard Practice for Testing for Whole Complement Activation in Serum by Solid Materials |
| 05/29/2024 |
Sterility |
14-601 |
Complete |
ISO |
17665 First edition 2024-03 |
Sterilization of health care products - Moist heat - Requirements for the development, validation and routine control of a sterilization process for medical devices |
| 11/08/2005 |
Radiology |
12-6 |
Complete |
IEC |
60806 First edition 1984-01 |
Determination of the maximum symmetrical radiation field from a rotating anode X-Ray tube for medical diagnosis |
| 01/30/2014 |
InVitro Diagnostics |
7-152 |
Complete |
CLSI |
EP12-A2 |
User Protocol for Evaluation of Qualitative Test Performance; Approved Guideline - Second Edition. |
| 08/21/2017 |
Software/
Informatics |
13-67 |
Complete |
ISO IEEE |
11073-10418 First edition 2014-03-01 |
Health informatics - Personal health device communication - Part 10418: Device specialization - International Normalized Ratio (INR) monitor [including TECHNICAL CORRIGENDUM 1 (2016)] |
| 07/06/2020 |
General Plastic Surgery/
General Hospital |
6-439 |
Complete |
ISO |
7886-2 Second edition 2020-04 |
Sterile hypodermic syringes for single use - Part 2: Syringes for use with power-driven syringe pumps |
| 07/06/2020 |
General Plastic Surgery/
General Hospital |
6-441 |
Complete |
ISO |
7886-3 Second edition 2020-05 |
Sterile hypodermic syringes for single use - Part 3: Auto-disabled syringes for fixed-dose immunization |
| 08/21/2017 |
Dental/
ENT |
4-215 |
Complete |
ANSI ADA |
Standard No. 96-2012 |
Dental Water-based Cements |
| 05/29/2024 |
Sterility |
14-602 |
Complete |
AAMI |
TIR12:2020/(R)2023 |
Designing, testing, and labeling medical devices intended for processing by health care facilities: A guide for device manufacturers |
| 05/29/2023 |
InVitro Diagnostics |
7-315 |
Complete |
CLSI |
EP12 3rd Edition |
Evaluation of Qualitative, Binary Output Examination Performance |
| 07/06/2020 |
Orthopedic |
11-364 |
Complete |
ISO |
14243-1 Second edition 2009-11-15 |
Implants for surgery - Wear of total knee-joint prostheses - Part 1: Loading and displacement parameters for wear-testing machines with load control and corresponding environmental conditions for test [Including AMENDMENT1 (2020)] |
| 03/16/2012 |
Radiology |
12-241 |
Complete |
IEC |
62274 First Edition 2005-05 |
Medical electrical equipment - Safety of radiotherapy record and verify systems |
| 07/15/2019 |
Physical Medicine |
16-206 |
Complete |
ISO |
7176 - 30 First edition 2018-12 |
Wheelchairs --Part 30: Wheelchairs for changing occupant posture --Test methods and requirements |
| 06/07/2021 |
Radiology |
12-339 |
Complete |
IEC |
60601-2-63 Edition 1.2 2021-05 CONSOLIDATED VERSION |
Medical electrical equipment - Part 2-63: Particular requirements for the basic safety and essential performance of dental extra-oral X-ray equipment |
| 05/29/2024 |
Software/
Informatics |
13-134 |
Complete |
ISO IEEE |
11073-10404 Second edition 2022-12 |
Health informatics - Personal health device communication - Part 10404: Device specialization - Pulse oximeter |
| 12/23/2019 |
Materials |
8-501 |
Complete |
ISO |
5834-1 Fourth edition 2019-02 |
Implants for surgery - Ultra-high-molecular-weight polyethylene - Part 1: Powder form |
| 12/23/2019 |
Materials |
8-502 |
Complete |
ASTM |
F2038-18 |
Standard Guide for Silicone Elastomers, Gels, and Foams Used in Medical Applications Part I - Formulations and Uncured Materials |
| 12/23/2019 |
Materials |
8-505 |
Complete |
ISO |
6474-2 Second edition 2019-03 |
Implants for surgery - Ceramic materials - Part 2: Composite materials based on a high-purity alumina matrix with zirconia reinforcement |
| 12/23/2019 |
Materials |
8-507 |
Complete |
ASTM |
F688-19 |
Standard Specification for Wrought Cobalt-35Nickel-20Chromium-10Molybdenum Alloy Plate, Sheet, and Foil for Surgical Implants (UNS R30035) |
| 05/29/2023 |
General Plastic Surgery/
General Hospital |
6-491 |
Complete |
ASTM |
F1670/F1670M-17a |
Standard Test Method for Resistance of Materials Used in Protective Clothing to Penetration by Synthetic Blood |
| 05/29/2024 |
Radiology |
12-355 |
Complete |
IEC |
60601-2-57 Edition 2.0 2023-07 |
Medical Electrical Equipment - Part 2-57: Particular requirements for the basic safety and essential performance of non-laser light source equipment intended for therapeutic, diagnostic, monitoring, cosmetic and aesthetic use |
| 05/29/2024 |
Materials |
8-616 |
Complete |
ISO ASTM |
52926-2 First edition 2023-11 |
Additive manufacturing of metals - Qualification principles - Part 2: Qualification of operators for PBF-LB |
| 05/29/2024 |
Materials |
8-617 |
Complete |
ISO ASTM |
52926-3 First edition 2023-11 |
Additive manufacturing of metals - Qualification principles - Part 3: Qualification of operators for PBF-EB |
| 12/21/2020 |
Biocompatibility |
2-279 |
Complete |
ASTM |
F750-20 |
Standard Practice for Evaluating Acute Systemic Toxicity of Material Extracts by Systemic Injection in the Mouse |
| 07/15/2019 |
Orthopedic |
11-353 |
Complete |
ISO |
18192-3 First edition 2017-06 |
Implants for surgery - Wear of total intervertebral spinal disc prostheses - Part 3: Impingement-wear testing and corresponding environmental conditions for test of lumbar prostheses under adverse kinematic conditions |
| 07/15/2019 |
Materials |
8-514 |
Complete |
ISO |
5834-2 Fifth edition 2019-02 |
Implants for surgery - Ultra-high-molecular-weight polyethylene - Part 2: Moulded forms |
| 05/29/2024 |
General I (QS/
RM) |
5-142 |
Complete |
ISO |
780 Fifth edition 2015-12-01 |
Packaging - Distribution packaging - Graphical symbols for handling and storage of packages |
| 01/27/2015 |
Dental/
ENT |
4-218 |
Complete |
ISO |
27020 First edition 2010-12-15 |
Dentistry - Brackets and tubes for use in orthodontics |
| ANSI ADA |
Standard No.100-2012 |
Orthodontic Brackets and Tubes |
| 03/16/2012 |
Radiology |
12-242 |
Complete |
IEC |
60601-2-57 Edition 1.0 2011-01 |
Medical Electrical Equipment - Part 2-57: Particular requirements for the basic safety and essential performance of non-laser light source equipment intended for therapeutic, diagnostic, monitoring and cosmetic/aesthetic use |
| 05/29/2023 |
ObGyn/
Gastroenterology/
Urology |
9-148 |
Complete |
ISO CIE |
11664-6 Second edition 2022-08 |
Colorimetry - Part 6: CIEDE2000 colour-difference formula |
| 12/21/2020 |
Physical Medicine |
16-230 |
Complete |
RESNA ANSI |
WC-2:2019 Section 25 |
American National Standard for Wheelchairs - Volume 2: Additional Requirements for Wheelchairs (including Scooters) with Electrical Systems Section 25: Batteries and Chargers for Powered Wheelchairs |
| 12/21/2020 |
Materials |
8-554 |
Complete |
ISO ASTM |
TR 52912 First edition 2020-09 |
Additive manufacturing - Design - Functionally graded additive manufacturing |
| 12/21/2020 |
Materials |
8-537 |
Complete |
ASTM |
F620-20 |
Standard Specification for Titanium Alloy Forgings for Surgical Implants in the Alpha Plus Beta Condition |
| 12/21/2020 |
Anesthesiology |
1-147 |
Complete |
ISO |
26825 Second edition 2020-10 |
Anaesthetic and respiratory equipment - User-applied labels for syringes containing drugs used during anaesthesia - Colours, design and performance |
| 07/09/2014 |
Radiology |
12-275 |
Complete |
IEC |
61161 Edition 3.0 2013-01 |
Ultrasonics -- Power measurement -- Radiation force balances and performance requirements |
| 09/09/2008 |
Radiology |
12-166 |
Complete |
NEMA |
XR 23-2006 (R2020) |
"Quality Control Manual" Template for Manufacturers of Hardcopy Output Devices Labeled for Final Interpretation in Full-field Digital Mammography |
| 05/29/2024 |
Sterility |
14-603 |
Complete |
AAMI |
TIR28:2016/(R)2020 |
Product adoption and process equivalence for ethylene oxide sterilization |
| 01/14/2019 |
Dental/
ENT |
4-250 |
Complete |
ISO |
7494-1 Third edition 2018-06 |
Dentistry - Stationary dental units and dental patient chairs - Part 1: General requirements |
| 01/14/2019 |
Dental/
ENT |
4-251 |
Complete |
ISO |
6872 Fourth edition 2015-06-01 [including AMENDMENT 1 2018-04] |
Dentistry - Ceramic materials |
| ANSI ADA |
Standard No. 69-2020 |
Dental Ceramic |
| 12/23/2019 |
Radiology |
12-329 |
Complete |
IEC |
60601-2-43 Edition 2.2 2019-10 CONSOLIDATED VERSION |
Medical electrical equipment - Part 2-43: Particular requirements for the safety and essential performance of X-ray equipment for interventional procedures |
| 12/21/2020 |
Materials |
8-545 |
Complete |
ASTM |
F2977-20 |
Standard Test Method for Small Punch Testing of Polymeric Biomaterials Used in Surgical Implants |
| 12/21/2020 |
InVitro Diagnostics |
7-300 |
Complete |
CLSI |
MM13 2nd Edition |
Collection, Transport, Preparation, and Storage of Specimens for Molecular Methods |
| 12/21/2020 |
InVitro Diagnostics |
7-301 |
Complete |
CLSI |
GP42 7th Edition |
Collection of Capillary Blood Specimens |
| 06/07/2021 |
ObGyn/
Gastroenterology/
Urology |
9-131 |
Complete |
ISO |
8600-5 Second Edition 2020-10 |
Optics and photonics - Medical endoscopes and endotherapy devices - Part 5: Determination of optical resolution of rigid endoscopes with optics |
| 04/04/2016 |
ObGyn/
Gastroenterology/
Urology |
9-113 |
Complete |
CEN |
EN 1618:1997 |
Catheters other than intravascular catheters - Test methods for common properties |
| 12/21/2020 |
InVitro Diagnostics |
7-302 |
Complete |
CLSI |
C34 4th Edition |
Sweat Testing: Specimen Collection and Quantitative Chloride Analysis |
| 12/21/2020 |
InVitro Diagnostics |
7-305 |
Complete |
ISO |
17511 Second edition 2020-04 |
In vitro diagnostic medical devices - Requirements for establishing metrological traceability of values assigned to calibrators, trueness control materials and human samples |
| 12/21/2020 |
Biocompatibility |
2-281 |
Complete |
ISO |
TS 10993-19 Second edition 2020-03 |
Biological evaluation of medical devices - Part 19: Physico-chemical, morphological and topographical characterization of materials |
![Sort by Date [Old to new]](/scripts/cdrh/images/arrow_up-black.GIF){kind=icon}
![Sort by Date [New to old]](/scripts/cdrh/images/arrow_down-black.GIF){kind=icon}
