|
Date of Entry
|
Specialty Task Group Area
|
Recognition Number
|
Extent of Recognition
|
Standards Developing Organization
|
Standard Designation Number and Date
|
Standard Title (click for recognition information)
|
12/23/2019 |
General I (QS/ RM) |
5-124 |
Complete |
ISO |
7000 Sixth edition 2019-07 |
Graphical symbols for use on equipment - Registered symbols |
12/23/2019 |
Radiology |
12-328 |
Complete |
IEC |
61223-3-5 Edition 2.0 2019-09 |
Evaluation and routine testing in medical imaging departments - Part 3-5: Acceptance tests - Imaging performance of computed tomography X-ray equipment [Including: Technical Corrigendum 1 (2006)] |
01/14/2019 |
Radiology |
12-102 |
Complete |
ANSI IES |
RP-27.2-00/R17 |
Recommended Practice for Photobiological Safety for Lamps and Lamp Systems - Measurement Techniques |
01/14/2019 |
Radiology |
12-321 |
Complete |
ANSI IES |
RP-27.3-17 |
Recommended Practice for Photobiological Safety for Lamps - Risk Group Classification and Labeling |
05/30/2022 |
Radiology |
12-345 |
Complete |
IEC |
61223-3-7 Edition 1.0 2021-12 |
Evaluation and routine testing in medical imaging departments - Part 3-7: Acceptance and constancy tests - Imaging performance of X-ray equipment for dental cone beam computed tomography |
05/29/2024 |
Sterility |
14-598 |
Complete |
ISO |
14644-3 Second edition 2020-06 |
Cleanrooms and associated controlled environments - Part 3: Test methods |
12/23/2019 |
Dental/ ENT |
4-262 |
Complete |
IEC |
80601-2-60 Edition 2.0 2019-06 |
Medical electrical equipment - Part 2-60: Particular requirements for the basic safety and essential performance of dental equipment |
08/06/2013 |
Software/ Informatics |
13-56 |
Complete |
IEEE |
Std 11073-10406-2011 |
Health informatics - Personal health device communication Part 10406: Device specialization - Basic electrocardiograph |
03/16/2012 |
Radiology |
12-177 |
Complete |
UL |
122-2007 (R2011) |
Standard for Photographic Equipment - Ed. 5.0 |
12/18/2023 |
Orthopedic |
11-409 |
Complete |
ASTM |
F3495-23 |
Standard Test Methods for Determining the Static Failure Load of Ceramic Knee Femoral Components |
05/29/2023 |
General Plastic Surgery/ General Hospital |
6-486 |
Complete |
ISO |
10535 Third edition 2021-10 |
Assistive products - Hoists for the transfer of disabled persons - Requirements and test methods |
07/06/2020 |
Radiology |
12-332 |
Complete |
IEC |
62464-1 Edition 2.0 2018-12 |
Magnetic resonance equipment for medical imaging Part 1: Determination of essential image quality parameters. |
07/06/2020 |
Radiology |
12-334 |
Complete |
AAMI |
RT3:2020 |
Radiation therapy machine characterization |
07/06/2020 |
Radiology |
12-325 |
Complete |
NEMA |
Standards Publication XR 25 -2019 |
Computed Tomography Dose Check |
12/23/2019 |
Dental/ ENT |
4-261 |
Complete |
ISO |
7405 Third edition 2018-10 Corrected version 2018-12 |
Dentistry - Evaluation of biocompatibility of medical devices used in dentistry |
12/23/2019 |
Orthopedic |
11-361 |
Complete |
ISO |
14243-5 First edition 2019-05 |
Implants for surgery - Wear of total knee prostheses - Part 5: Durability performance of the patellofemoral joint |
05/29/2023 |
Cardiovascular |
3-186 |
Complete |
ISO |
14708-2 Third edition 2019-09 |
Implants for surgery - Active implantable medical devices - Part 2: Cardiac pacemakers |
12/18/2023 |
Materials |
8-605 |
Complete |
ASTM |
F1609-23 |
Standard Specification for Calcium Phosphate Coatings for Implantable Materials |
08/21/2017 |
Software/ Informatics |
13-67 |
Complete |
ISO IEEE |
11073-10418 First edition 2014-03-01 |
Health informatics - Personal health device communication - Part 10418: Device specialization - International Normalized Ratio (INR) monitor [including TECHNICAL CORRIGENDUM 1 (2016)] |
12/23/2019 |
Materials |
8-501 |
Complete |
ISO |
5834-1 Fourth edition 2019-02 |
Implants for surgery - Ultra-high-molecular-weight polyethylene - Part 1: Powder form |
12/23/2019 |
Materials |
8-502 |
Complete |
ASTM |
F2038-18 |
Standard Guide for Silicone Elastomers, Gels, and Foams Used in Medical Applications Part I - Formulations and Uncured Materials |
12/23/2019 |
Materials |
8-507 |
Complete |
ASTM |
F688-19 |
Standard Specification for Wrought Cobalt-35Nickel-20Chromium-10Molybdenum Alloy Plate, Sheet, and Foil for Surgical Implants (UNS R30035) |
01/27/2015 |
Sterility |
14-379 |
Complete |
ISO |
14644-8 Second edition 2013-02-15 |
Cleanrooms and associated controlled environments - Part 8: Classification of air cleanliness by chemical concentration (ACC) |
03/16/2012 |
Radiology |
12-241 |
Complete |
IEC |
62274 First Edition 2005-05 |
Medical electrical equipment - Safety of radiotherapy record and verify systems |
08/06/2013 |
Radiology |
12-253 |
Complete |
IEC |
60976 Edition 2.0 2007-10 |
Medical electrical equipment - Medical electron accelerators - Functional performance characteristics |
08/06/2013 |
Radiology |
12-255 |
Complete |
IEC |
60601-2-11 Edition 3.0 2013-01 |
Medical electrical equipment - Part 2-11: Particular requirements for the basic safety and essential performance of gamma beam therapy equipment |
12/18/2023 |
Sterility |
14-592 |
Complete |
ISO |
13408-1 Third edition 2023-08 |
Aseptic processing of health care products - Part 1: General requirements |
09/17/2018 |
Materials |
8-475 |
Complete |
ASTM |
F2026-17 |
Standard Specification for Polyetheretherketone (PEEK) Polymers for Surgical Implant Applications |
12/18/2023 |
Sterility |
14-594 |
Complete |
ISO |
11607-1 Second edition 2019-02 [Including AMD1:2023] |
Packaging for terminally sterilized medical devices - Part 1: Requirements for materials, sterile barrier systems and packaging systems [Including Amendment 1 (2023)] |
12/18/2023 |
Dental/ ENT |
4-317 |
Complete |
ISO |
8325 Third edition 2023-03 |
Dentistry - Test methods for rotary instruments |
09/17/2018 |
Dental/ ENT |
4-244 |
Complete |
ISO |
8325 Second edition 2004-09-15 |
Dentistry - Test methods for rotary instruments |
12/18/2023 |
Dental/ ENT |
4-312 |
Complete |
ANSI ASA |
S3.35-2021 |
American National Standard Method for Measurement of Performance Characteristics of Hearing Aids Under Simulated Real-Ear Working Conditions |
12/23/2019 |
Materials |
8-505 |
Complete |
ISO |
6474-2 Second edition 2019-03 |
Implants for surgery - Ceramic materials - Part 2: Composite materials based on a high-purity alumina matrix with zirconia reinforcement |
10/09/2023 |
Software/ Informatics |
13-130 |
Complete |
ANSI AAMI |
2700-2-1:2022 |
Medical devices and medical systems - Essential safety and performance requirements for equipment comprising the patient-centric integrated clinical environment (ICE): Part 2-1: Particular requirements for forensic data logging |
08/06/2013 |
Software/ Informatics |
13-53 |
Complete |
ISO IEEE |
11073-10415 First edition 2010-05-01 |
Health informatics - Point-of-care medical device communication - Part 10415: Device specialization - Weighing scale |
12/21/2020 |
Dental/ ENT |
4-268 |
Complete |
ISO |
15841 Second edition 2014-08 |
Dentistry - Wires for use in orthodontics [Including AMENDMENT 1 (2020)] |
ANSI ADA |
Standard No. 32-2017 |
Orthodontic Wires |
09/09/2008 |
Software/ Informatics |
13-18 |
Complete |
CLSI |
LIS03-A |
Standard Guide for Selection of a Clinical Laboratory Information Management System |
12/18/2023 |
Orthopedic |
11-403 |
Complete |
ASTM |
F3047M-23 |
Standard Guide for High Demand Hip Simulator Wear Testing of Hard-on-Hard Articulations |
12/23/2019 |
General II (ES/ EMC) |
19-33 |
Complete |
IEC |
62133-2 Edition1.0 2017-02 |
Secondary cells and batteries containing alkaline or other non-acid electrolytes - Safety requirements for portable sealed secondary cells, and for batteries made from them, for use in portable applications - Part 2: Lithium systems |
07/06/2020 |
Tissue Engineering |
15-62 |
Complete |
ASTM |
F2602-18 |
Standard Test Method for Determining the Molar Mass of Chitosan and Chitosan Salts by Size Exclusion Chromatography with Multi-angle Light Scattering Detection (SEC-MALS) |
07/06/2020 |
Dental/ ENT |
4-263 |
Complete |
ISO |
9693 Third edition 2019-10 |
Dentistry - Compatibility testing for metal-ceramic and ceramic-ceramic systems |
ANSI ADA |
Standard No. 38-2020 |
Dentistry - Compatibility testing for metal-ceramic and ceramic-ceramic systems |
12/23/2019 |
General II (ES/ EMC) |
19-32 |
Complete |
IEC |
62133-1 Edition 1.0 2017-02 |
Secondary cells and batteries containing alkaline or other non-acid electrolytes - Safety requirements for portable sealed secondary cells, and for batteries made from them, for use in portable applications - Part 1: Nickel systems |
07/06/2020 |
General Plastic Surgery/ General Hospital |
6-439 |
Complete |
ISO |
7886-2 Second edition 2020-04 |
Sterile hypodermic syringes for single use - Part 2: Syringes for use with power-driven syringe pumps |
07/06/2020 |
General Plastic Surgery/ General Hospital |
6-441 |
Complete |
ISO |
7886-3 Second edition 2020-05 |
Sterile hypodermic syringes for single use - Part 3: Auto-disabled syringes for fixed-dose immunization |
12/18/2023 |
Orthopedic |
11-405 |
Complete |
ASTM |
F1829-23 |
Standard Test Method for Static Evaluation of Anatomic Glenoid Locking Mechanism in Shear |
06/27/2015 |
Sterility |
14-484 |
Complete |
ASTM |
F1929-15 |
Standard Test Method for Detecting Seal Leaks in Porous Medical Packaging by Dye Penetration |
12/23/2019 |
Materials |
8-492 |
Complete |
ISO |
5832-9 Third edition 2019-02 |
Implants for surgery - Metallic materials - Part 9: Wrought high nitrogen stainless steel |
12/23/2019 |
Materials |
8-494 |
Complete |
ISO |
6474-1 Second edition 2019-03 |
Implants for surgery - Ceramic materials - Part 1: Ceramic materials based on high purity alumina |
12/23/2019 |
Materials |
8-498 |
Complete |
ASTM |
F75-18 |
Standard Specification for Cobalt-28 Chromium-6 Molybdenum Alloy Castings and Casting Alloy for Surgical Implants (UNS R30075) |
12/23/2019 |
Materials |
8-499 |
Complete |
ASTM |
F1580-18 |
Standard Specification for Titanium and Titanium-6 Aluminum-4 Vanadium Alloy Powders for Coatings of Surgical Implants |
12/23/2019 |
Materials |
8-500 |
Complete |
ISO |
5832-12 Third edition 2019-02 |
Implants for surgery - Metallic materials - Part 12: Wrought cobalt-chromium-molybdenum alloy |
07/15/2019 |
Software/ Informatics |
13-108 |
Complete |
IEEE |
Std 11073-20701-2018 |
Health informatics - Point-of-care medical device communication - Part 20701: Service-Oriented Medical Device Exchange Architecture and Protocol Binding |
05/29/2024 |
Sterility |
14-601 |
Complete |
ISO |
17665 First edition 2024-03 |
Sterilization of health care products - Moist heat - Requirements for the development, validation and routine control of a sterilization process for medical devices |
07/15/2019 |
General II (ES/ EMC) |
19-35 |
Complete |
UL |
Standard for Standby Batteries |
1989 Edition 5, 2013-10-02, ANSI November 2018 |
12/23/2019 |
Software/ Informatics |
13-111 |
Complete |
IEEE |
Std 11073-10201-2018 |
Health informatics - Point-of-care medical device communication Part 10201: Domain Information Model |
06/07/2021 |
Orthopedic |
11-376 |
Complete |
ASTM |
F2033-20 |
Standard Specification for Total Hip Joint Prosthesis and Hip Endoprosthesis Bearing Surfaces Made of Metallic, Ceramic, and Polymeric Materials |
03/16/2012 |
Cardiovascular |
3-96 |
Complete |
ISO |
81060-1 First edition 2007-12-01 |
Non-invasive sphygmomanometers - Part 1: Requirements and test methods for non-automated measurement type |
ANSI AAMI ISO |
81060-1:2007/(R)2013 |
Non-invasive sphygmomanometers - Part 1: Requirements and test methods for non-automated measurement type |
07/12/1999 |
Radiology |
12-51 |
Complete |
IEC |
61145 (1992-05) |
Calibration and usage of ionization chamber systems for assay of radionuclides |
03/08/2004 |
InVitro Diagnostics |
7-86 |
Complete |
CLSI |
C29-A2 (Replaces C29-A) |
Standardization of Sodium and Potassium Ion Selective Electrode Systems to the Flame Photometric Reference Method; Approved Standard - Second Edition |
03/08/2004 |
InVitro Diagnostics |
7-87 |
Complete |
CLSI |
C31-A2 (Replaces C31-A) |
Ionized Calcium Determinations: Precollection Variables, Specimen Choice, Collection, and Handling; Approved Guideline - Second Edition. |
03/08/2004 |
InVitro Diagnostics |
7-88 |
Complete |
CLSI |
C37-A |
Preparation and Validation of Commutable Frozen Human Serum Pools as Secondary Reference Materials for Cholesterol Measurement Procedures; Approved Guideline |
03/08/2004 |
InVitro Diagnostics |
7-89 |
Complete |
CLSI |
C39-A (Replaces C39-P) |
A Designated Comparison Method for the Measurement of Ionized Calcium in Serum; Approved Standard |
10/04/2004 |
InVitro Diagnostics |
7-105 |
Complete |
CLSI |
H30-A2 |
Procedure for the Determination of Fibrinogen in Plasma; Approved Guideline Second Edition |
06/27/2016 |
Materials |
8-429 |
Complete |
ASTM |
F2224-09 (Reapproved 2020) |
Standard Specification for High Purity Calcium Sulfate Hemihydrate or Dihydrate for Surgical Implants |
08/21/2017 |
Cardiovascular |
3-149 |
Complete |
ISO |
25539-1 Second edition 2017-02 |
Cardiovascular implants - Endovascular devices - Part 1: Endovascular prostheses |
07/15/2019 |
Materials |
8-513 |
Complete |
ISO |
20160 First edition 2006-05-01 |
Implants for surgery - Metallic materials - Classification of microstructures for alpha+beta titanium alloy bars |
12/18/2023 |
Orthopedic |
11-407 |
Complete |
ASTM |
F3140-23 |
Standard Test Method for Cyclic Fatigue Testing of Metal Tibial Tray Components of Unicondylar Knee Joint Replacements |
07/06/2020 |
Software/ Informatics |
13-115 |
Complete |
ISO IEC IEEE |
29119-1 First edition 2013-09-01 |
Software and systems engineering - Software testing - Part 1: Concepts and definitions |
07/15/2019 |
Biocompatibility |
2-263 |
Complete |
ASTM |
F1903-18 |
Standard Practice for Testing for Cellular Responses to Particles in vitro |
12/23/2019 |
General Plastic Surgery/ General Hospital |
6-426 |
Complete |
ISO |
23907-1 First edition 2019-01 |
Sharps injury protection - Requirements and test methods - Sharps containers |
06/07/2021 |
Orthopedic |
11-377 |
Complete |
ASTM |
F2083-21 |
Standard Specification for Knee Replacement Prosthesis |
09/11/2023 |
Orthopedic |
11-401 |
Complete |
ISO |
21535 Third edition 2023-07 |
Non-active surgical implants - Joint replacement implants - Specific requirements for hip-joint replacement implants |
07/06/2020 |
Sterility |
14-540 |
Complete |
ISO |
11737-2 Third edition 2019-12 |
Sterilization of medical devices - Microbiological methods - Part 2: Tests of sterility performed in the definition, validation and maintenance of a sterilization process |
ANSI AAMI ISO |
11737-2:2019 |
Sterilization of medical devices - Microbiological methods - Part 2: Tests of sterility performed in the definition, validation and maintenance of a sterilization process |
07/15/2019 |
Anesthesiology |
1-116 |
Complete |
ISO |
5360 Fourth edition 2016-02-15 |
Anaesthetic vaporizers - Agent specific filling systems |
06/07/2018 |
General Plastic Surgery/ General Hospital |
6-402 |
Complete |
ASTM |
F1670/F1670M-17 |
Standard Test Method for Resistance of Materials Used in Protective Clothing to Penetration by Synthetic Blood |
07/09/2014 |
Orthopedic |
11-276 |
Complete |
ASTM |
F1798-13 |
Standard Guide for Evaluating the Static and Fatigue Properties of Interconnection Mechanisms and Subassemblies Used in Spinal Arthrodesis Implants |
12/21/2020 |
Dental/ ENT |
4-270 |
Complete |
ANSI ADA |
Technical Report No. 146-2018 |
CAD/CAM Abutments in Dentistry |
01/14/2019 |
Software/ Informatics |
13-79 |
Complete |
IEC |
62304 Edition 1.1 2015-06 CONSOLIDATED VERSION |
Medical device software - Software life cycle processes |
ANSI AAMI IEC |
62304:2006/A1:2016 |
Medical device software - Software life cycle processes [Including Amendment 1 (2016)] |
07/06/2020 |
Sterility |
14-541 |
Complete |
ANSI AAMI |
ST72:2019 |
Bacterial endotoxins - Test methods, routine monitoring, and alternatives to batch testing |
12/18/2023 |
Dental/ ENT |
4-311 |
Complete |
ISO |
9917-2 Third edition 2017-09 |
Dentistry - Water-based cements - Part 2: Resin-modified cements |
12/23/2019 |
Radiology |
12-329 |
Complete |
IEC |
60601-2-43 Edition 2.2 2019-10 CONSOLIDATED VERSION |
Medical electrical equipment - Part 2-43: Particular requirements for the safety and essential performance of X-ray equipment for interventional procedures |
07/06/2020 |
Cardiovascular |
3-165 |
Complete |
ASTM |
F1841-19 |
Standard Practice for Assessment of Hemolysis in Continuous Flow Blood Pumps |
07/06/2020 |
Cardiovascular |
3-155 |
Complete |
IEC |
60601-2-47 Edition 2.0 2012-02 |
Medical electrical equipment - Part 2-47: Particular requirements for the basic safety and essential performanceof ambulatory electrocardiographic systems |
ANSI AAMI IEC |
60601-2-47:2012/(R)2016 |
Medical electrical equipment -- Part 2-47: Particular requirements for the basic safety and essential performance of ambulatory electrocardiographic systems |
08/06/2013 |
Software/ Informatics |
13-55 |
Complete |
IEEE |
Std 11073-10421-2010 |
Health informatics - Personal health device communication Part 10421: Device specialization - Peak expiratory flow monitor (peak flow) |
05/29/2024 |
Cardiovascular |
3-192 |
Complete |
ISO |
22679 First edition 2021-11 |
Cardiovascular implants - Transcatheter cardiac occluders
|
12/21/2020 |
Ophthalmic |
10-121 |
Complete |
ISO |
16672 Third edition 2020-06 |
Ophthalmic implants - Ocular endotamponades |
07/15/2019 |
Orthopedic |
11-349 |
Complete |
ISO |
14242-3 First edition 2009-03-15 |
Implants for surgery - Wear of total hip-joint prostheses - Part 3: Loading and displacement parameters for orbital bearing type wear testing machines and corresponding environmental conditions for test [Including AMENDMENT 1 (2019)] |
07/15/2019 |
Orthopedic |
11-351 |
Complete |
ISO |
18192-1 Second edition 2011-03-01 |
Implants for surgery - Wear of total intervertebral spinal disc prostheses - Part 1: Loading and displacement parameters for wear testing and corresponding environmental conditions for test [Including AMENDMENT 1 (2018)] |
12/23/2019 |
Software/ Informatics |
13-112 |
Complete |
AAMI |
TIR97:2019 |
Principles for medical device security - Postmarket risk management for device manufacturers |
05/29/2024 |
Cardiovascular |
3-191 |
Complete |
ISO |
18242 First edition 2016-09-01 [Including AMD1:2023] |
Cardiovascular implants and extracorporeal systems - Centrifugal blood pumps [Including AMENDMENT 1 (2023)] |
12/18/2023 |
Radiology |
12-352 |
Complete |
NEMA |
PS 3.1 - 3.20 2023e |
Digital Imaging and Communications in Medicine (DICOM) Set |
07/15/2019 |
General Plastic Surgery/ General Hospital |
6-422 |
Complete |
AAMI |
TIR38:2019 |
Medical device safety assurance case guidance |
07/06/2020 |
Sterility |
14-543 |
Complete |
ISO |
11139 First edition 2018-08 |
Sterilization of health care products - Vocabulary of terms used in sterilization and related equipment and process standards |
07/06/2020 |
Sterility |
14-544 |
Complete |
ISO |
18472 Second edition 2018-08 |
Sterilization of health care products - Biological and chemical indicators - Test equipment |
07/15/2019 |
General Plastic Surgery/ General Hospital |
6-421 |
Complete |
ISO |
80601-2-56 Second edition 2017-03 |
Medical electrical equipment - Part 2-56: Particular requirements for basic safety and essential performance of clinical thermometers for body temperature measurement. [Including: Amendment 1 (2018)]. |
12/21/2020 |
Dental/ ENT |
4-266 |
Complete |
ISO |
19023 First edition 2018-02 |
Dentistry - Orthodontic anchor screws |
ANSI ADA |
Standard No. 178-2019 |
Orthodontic Anchor Screws |
05/29/2024 |
Anesthesiology |
1-177 |
Complete |
ISO |
80601-2-74 Second edition 2021-07 |
Medical electrical equipment - Part 2-74: Particular requirements for basic safety and essential performance of respiratory humidifying equipment |
07/06/2020 |
Sterility |
14-545 |
Complete |
ISO ASTM |
51276 Fourth edition 2019-08 |
Practice for use of a polymethylmethacrylate dosimetry system |
04/04/2016 |
Radiology |
12-195 |
Complete |
NEMA |
MS 6-2008 (R2014, R2020) |
Determination of Signal-to-Noise Ratio and Image Uniformity for Single-Channel Non-Volume Coils in Diagnostic MR Imaging |
06/07/2018 |
Anesthesiology |
1-135 |
Complete |
ISO |
18562-2 First edition 2017-03 |
Biocompatibility evaluation of breathing gas pathways in healthcare applications - Part 2: Tests for emissions of particulate matter |