|
Date of Entry
|
Specialty Task Group Area
|
Recognition Number
|
Extent of Recognition
|
Standards Developing Organization
|
Standard Designation Number and Date
|
Standard Title (click for recognition information)
|
12/21/2020 |
ObGyn/ Gastroenterology/ Urology |
9-130 |
Complete |
ISO |
8600-6 Second edition 2020-09 |
Endoscopes - Medical endoscopes and endotherapy devices - Part 6: Vocabulary |
12/21/2020 |
InVitro Diagnostics |
7-299 |
Complete |
CLSI |
POCT14 2nd Edition |
Point-of-Care Coagulation Testing and Anticoagulation Monitoring |
04/04/2016 |
Nanotechnology |
18-1 |
Complete |
ASTM |
E2490-09 (Reapproved 2021) |
Standard Guide for Measurement of Particle Size Distribution of Nanomaterials in Suspension by Photon Correlation Spectroscopy (PCS) |
07/09/2014 |
Software/ Informatics |
13-65 |
Complete |
UL ANSI |
1998 Third Edition 2013 |
Standards for Safety Software in Programmable Components, Second Edition. [This Standard contains revisions through and including October 28, 2008] |
08/21/2017 |
Biocompatibility |
2-246 |
Complete |
ASTM |
F1877-16 |
Standard Practice for Characterization of Particles |
01/14/2019 |
InVitro Diagnostics |
7-232 |
Complete |
CLSI |
MM05-A2 Vol. 32 No. 6 Replaces MM05-A Vol. 23 No. 17 |
Nucleic Acid Amplification Assays for Molecular Hematopathology; Approved Guideline - Second Edition |
07/06/2020 |
Materials |
8-526 |
Complete |
ASTM |
F2182-19e2 |
Standard Test Method for Measurement of Radio Frequency Induced Heating On or Near Passive Implants During Magnetic Resonance |
07/06/2020 |
Biocompatibility |
2-273 |
Complete |
ISO |
10993-9 Third edition 2019-11 |
Biological evaluation of medical devices - Part 9: Framework for identification and quantification of potential degradation products |
12/23/2016 |
General II (ES/ EMC) |
19-20 |
Complete |
IEEE ANSI |
C63.16-2016 (Revision of ANSI C63.16-1993) |
American National Standard Guide for Electrostatic Discharge Test Methodologies and Acceptance Criteria for Electronic Equipment |
08/06/2013 |
Software/ Informatics |
13-59 |
Complete |
ISO IEC IEEE |
15026-4 First edition 2021-10-01 |
Systems and software engineering - Systems and software assurance - Part 4: Assurance in the life cycle |
04/04/2016 |
General I (QS/ RM) |
5-98 |
Complete |
ANSI ESD |
S20.20-2014 |
Standard for the Development of an Electrostatic Discharge Control Program for Protection of Electrical and Electronic Parts, Assemblies and Equipment (Excluding Electrically Initiated Explosive Devices) |
12/23/2019 |
Physical Medicine |
16-219 |
Complete |
RESNA ANSI |
WC-2:2019 Section 14 |
American National Standard for Wheelchairs - Volume 2: Additional Requirements for Wheelchairs (including Scooters) with Electrical Systems Section 14: Power and Control Systems for Electrically Powered Wheelchairs Requirements and Test Methods |
10/19/2020 |
Software/ Informatics |
13-116 |
Complete |
FIRST |
CVSS v3.0 |
Common Vulnerability Scoring System version 3.0 |
08/06/2013 |
Software/ Informatics |
13-38 |
Complete |
IEC |
80001-1 Edition 1.0 2010-10 |
Application of risk management for IT-networks incorporating medical devices - Part 1: Roles, responsibilities and activities |
ANSI AAMI IEC |
80001-1:2010 |
Application of risk management for IT Networks incorporating medical devices - Part 1: Roles, responsibilities and activities |
01/30/2014 |
Software/ Informatics |
13-63 |
Complete |
ANSI AAMI IEC |
TIR 80001-2-4:2012 |
Application of risk management for IT-networks incorporating medical devices - Part 2-4: General implementation guidance for healthcare delivery organizations |
IEC |
TR 80001-2-4 Edition 1.0 2012-11 |
Application of risk management for IT-networks incorporating medical devices -- Part 2-4: Application guidance - General implementation guidance for healthcare delivery organization |
03/18/2009 |
InVitro Diagnostics |
7-182 |
Complete |
CLSI |
M36-A |
Clinical Use and Interpretation of Serologic Tests for Toxoplasma gondii; Approved Guideline. |
03/18/2009 |
InVitro Diagnostics |
7-185 |
Complete |
CLSI |
M41-A |
Viral Culture; Approved Guideline. |
03/18/2009 |
General Plastic Surgery/ General Hospital |
6-215 |
Complete |
ASTM |
F2132-01 (Reapproved 2008)e1 |
Standard Specification for Puncture Resistance of Materials Used in Containers for Discarded Medical Needles and Other Sharps |
03/18/2009 |
InVitro Diagnostics |
7-189 |
Complete |
CLSI |
M47-A (Replaces M47-P) |
Principles and Procedures for Blood Cultures; Approved Guideline |
03/18/2009 |
InVitro Diagnostics |
7-190 |
Complete |
CLSI |
M50-A (Replaces M50-P) |
Quality Control for Commercial Microbial Identification Systems; Approved Guideline |
03/18/2009 |
InVitro Diagnostics |
7-192 |
Complete |
CLSI |
MM18-A (Replaces MM18-P) |
Interpretive Criteria for Indentification of Bacteria and Fungi by DNA Target Sequencing; Approved Guideline |
03/18/2009 |
InVitro Diagnostics |
7-71 |
Complete |
CLSI |
H15-A3 (Replaces H15-A2) |
Reference and Selected Procedures for the Quantitative Determination of Hemoglobin in Blood; Approved Standard - Third Edition |
03/18/2009 |
Software/ Informatics |
13-25 |
Complete |
CLSI |
AUTO8-A |
Managing and Validating Laboratory Information Systems; Approved Guideline |
03/18/2009 |
Software/ Informatics |
13-26 |
Complete |
CLSI |
AUTO10-A |
Autoverification of Clinical Laboratory Test Results; Approved Guideline |
06/27/2016 |
Materials |
8-429 |
Complete |
ASTM |
F2224-09 (Reapproved 2020) |
Standard Specification for High Purity Calcium Sulfate Hemihydrate or Dihydrate for Surgical Implants |
08/21/2017 |
Cardiovascular |
3-149 |
Complete |
ISO |
25539-1 Second edition 2017-02 |
Cardiovascular implants - Endovascular devices - Part 1: Endovascular prostheses |
07/15/2019 |
Materials |
8-513 |
Complete |
ISO |
20160 First edition 2006-05-01 |
Implants for surgery - Metallic materials - Classification of microstructures for alpha+beta titanium alloy bars |
06/07/2021 |
Anesthesiology |
1-151 |
Complete |
ISO |
80601-2-70 Second edition 2020-11 |
Medical electrical equipment - Part 2-70: Particular requirements for the basic safety and essential performance of sleep apnoea breathing therapy equipment |
07/06/2020 |
Tissue Engineering |
15-61 |
Complete |
ASTM |
F2150-19 |
Standard Guide for Characterization and Testing of Biomaterial Scaffolds Used in Regenerative Medicine and Tissue-Engineered Medical Products |
12/21/2020 |
Biocompatibility |
2-280 |
Complete |
ASTM |
F1408-20a |
Standard Practice for Subcutaneous Screening Test for Implant Materials |
05/05/2010 |
InVitro Diagnostics |
7-207 |
Complete |
CLSI |
GP16-A3 (Replaces GP16-A2) |
Urinalysis; Approved Guideline - Third Edition |
10/04/2010 |
Radiology |
12-215 |
Complete |
IEC |
62494-1 Edition 1.0 (2008-08) |
Medical electrical equipment - Exposure index of digital X-ray imaging systems - Part 1: Definitions and requirements for general radiography |
03/14/2011 |
Radiology |
12-217 |
Complete |
IEC |
62083 Edition 2.0 2009-09 |
Medical electrical equipment - Requirements for the safety of radiotherapy treatment planning systems |
10/04/2010 |
InVitro Diagnostics |
7-212 |
Complete |
CLSI |
EP18-A2 |
Risk Management Techniques to Identify and Control Laboratory Error Sources; Approved Guideline - Second Edition |
03/14/2011 |
Radiology |
12-221 |
Complete |
IEC |
61223-3-4 First edition 2000-03 |
Evaluation and routine testing in medical imaging departments - Part 3-4: Acceptance tests - Imaging performance of dental X-ray |
03/16/2012 |
Radiology |
12-142 |
Complete |
ISO |
11146-2 First edition 2005-02-15 |
Lasers and laser-related equipment - Test methods for laser beam widths, divergence angles and beam propagation ratios - Part 2: General astigmatic beams |
07/06/2020 |
Orthopedic |
11-367 |
Complete |
ISO |
14243-3 Second edition 2014-11-01 |
Implants for surgery - Wear of total knee-joint prostheses - Part 3: Loading and displacement parameters for wear-testing machines with displacement control and corresponding environmental conditions for test [Including AMENDMENT1 (2020)] |
07/06/2020 |
Orthopedic |
11-368 |
Complete |
ASTM |
F3334-19 |
Standard Practice for Finite Element Analysis (FEA) of Metallic Orthopaedic Total Knee Tibial Components |
07/06/2020 |
Orthopedic |
11-369 |
Complete |
ASTM |
F3292-19 |
Standard Practice for Inspection of Spinal Implants Undergoing Testing |
07/09/2014 |
Sterility |
14-282 |
Complete |
ASTM |
F2338-09 (Reapproved 2020) |
Standard Test Method for Nondestructive Detection of Leaks in Packages by Vacuum Decay Method |
01/27/2015 |
Neurology |
17-13 |
Complete |
IEEE |
Std 2010-2012 |
Recommended Practice for Neurofeedback Systems |
01/27/2015 |
ObGyn/ Gastroenterology/ Urology |
9-45 |
Complete |
ASTM |
F2528-06(2023) |
Standard Test Methods for Enteral Feeding Devices with a Retention Balloon |
07/09/2014 |
Sterility |
14-286 |
Complete |
ANSI AAMI |
ST65:2008/(R)2018 |
Processing of reusable surgical textiles for use in health care facilities |
08/06/2013 |
Software/ Informatics |
13-56 |
Complete |
IEEE |
Std 11073-10406-2011 |
Health informatics - Personal health device communication Part 10406: Device specialization - Basic electrocardiograph |
08/21/2017 |
Software/ Informatics |
13-67 |
Complete |
ISO IEEE |
11073-10418 First edition 2014-03-01 |
Health informatics - Personal health device communication - Part 10418: Device specialization - International Normalized Ratio (INR) monitor [including TECHNICAL CORRIGENDUM 1 (2016)] |
12/23/2019 |
Materials |
8-501 |
Complete |
ISO |
5834-1 Fourth edition 2019-02 |
Implants for surgery - Ultra-high-molecular-weight polyethylene - Part 1: Powder form |
12/04/2017 |
Software/ Informatics |
13-101 |
Complete |
ISO IEC |
15459-6 Second edition 2014 Corrected 2016 |
Information technology - Automatic identification and data capture techniques - Unique identification - Part 6: Groupings |
08/21/2017 |
Software/ Informatics |
13-96 |
Complete |
UL ANSI |
2900-1 First Edition 2017 |
Standard for Safety, Standard for Software Cybersecurity Network-Connectable Products, Part 1: General Requirements |
08/21/2017 |
Software/ Informatics |
13-97 |
Complete |
IEC |
82304-1 Edition 1.0 2016-10 |
Health software - Part 1: General requirements for product safety |
01/15/2013 |
InVitro Diagnostics |
7-233 |
Complete |
CLSI |
EP17-A2 |
Evaluation of Detection Capability for Clinical Laboratory Measurement Procedures; Approved Guideline - Second Edition |
01/15/2013 |
InVitro Diagnostics |
7-237 |
Complete |
CLSI |
MM01-A3 (Replaces MM01-A2) |
Molecular Methods for Clinical Genetics and Oncology Testing; Approved Guideline - Third Edition |
01/15/2013 |
InVitro Diagnostics |
7-238 |
Complete |
CLSI |
MM06-A2 (Replaces MM06-A) |
Quantitative Molecular Methods for Infectious Diseases; Approved Guideline - Second Edition |
01/15/2013 |
Software/ Informatics |
13-35 |
Complete |
ANSI AAMI |
SW87:2012 |
Application of quality management system concepts to medical device data systems |
08/14/2015 |
Materials |
8-389 |
Complete |
ISO |
15309 First edition 2013-12-01 |
Implants for surgery - Differential scanning calorimetry of poly ether ether ketone (PEEK) polymers and compounds for use in implantable medical devices |
08/06/2013 |
Cardiovascular |
3-115 |
Complete |
IEC |
60601-2-34 Edition 3.0 2011-05 |
Medical electrical equipment - Part 2-34: Particular requirements for the basic safety, including essential performance, of invasive blood pressure monitoring equipment |
08/14/2015 |
Software/ Informatics |
13-77 |
Complete |
ISO IEC |
29147 First edition 2014-02-15 |
Information technology - Security techniques - Vulnerability disclosure |
01/14/2019 |
Anesthesiology |
1-114 |
Complete |
ISO |
18835 First Edition 2015-04-01 |
Inhalational Anaesthesia Systems - Draw-over Anaesthetic Systems |
12/21/2020 |
Orthopedic |
11-375 |
Complete |
ASTM |
F2193-20 |
Standard Specifications and Test Methods for Components Used in the Surgical Fixation of the Spinal Skeletal System |
05/30/2022 |
General II (ES/ EMC) |
19-46 |
Complete |
ANSI AAMI |
ES60601-1:2005/(R)2012 & A1:2012, C1:2009/(R)2012 & A2:2010/(R)2012 (Cons. Text) [Incl. AMD2:2021] |
Medical electrical equipment - Part 1: General requirements for basic safety and essential performance (IEC 60601-1:2005, MOD) [Including Amendment 2 (2021)] |
01/14/2019 |
Anesthesiology |
1-120 |
Complete |
ISO |
18190 First edition 2016-11-01 |
Anaesthetic and respiratory equipment - General requirements for airways and related equipment |
01/14/2019 |
General Plastic Surgery/ General Hospital |
6-410 |
Complete |
ISO |
8536-6 Third edition 2016-12-01 |
Infusion equipment for medical use - Part 6: Freeze drying closures for infusion bottles |
01/14/2019 |
Nanotechnology |
18-6 |
Complete |
ASTM |
E2865-12 (Reapproved 2022) |
Standard Guide for Measurement of Electrophoretic Mobility and Zeta Potential of Nanosized Biological Materials |
05/30/2022 |
Sterility |
14-576 |
Complete |
ASTM |
D4169-22 |
Standard Practice for Performance Testing of Shipping Containers and Systems |
01/30/2014 |
Materials |
8-358 |
Complete |
ASTM |
F1855-00 (Reapproved 2019) |
Standard Specification for Polyoxymethylene (Acetal) for Medical Applications |
06/27/2015 |
Sterility |
14-484 |
Complete |
ASTM |
F1929-15 |
Standard Test Method for Detecting Seal Leaks in Porous Medical Packaging by Dye Penetration |
12/20/2021 |
Ophthalmic |
10-129 |
Complete |
ASTM |
D790-17 |
Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials |
05/30/2022 |
Sterility |
14-579 |
Complete |
ISO |
17664-2 First edition 2021-02 |
Processing of health care products - Information to be provided by the medical device manufacturer for the processing of medical devices - Part 2: Non-critical medical devices. |
04/04/2016 |
General Plastic Surgery/ General Hospital |
6-356 |
Complete |
ASTM |
D5712-15(2020) |
Standard Test Method for Analysis of Aqueous Extractable Protein in Natural Rubber in Latex, Natural Rubber, and Elastomeric Products Using the Modified Lowry Method |
04/04/2016 |
Orthopedic |
11-247 |
Complete |
ASTM |
F2789-10 (Reapproved 2020) |
Standard Guide for Mechanical and Functional Characterization of Nucleus Devices |
12/20/2021 |
General II (ES/ EMC) |
19-41 |
Complete |
ANSI UL |
61010-1 3rd Ed, dated May 12, 2012 with revision through July 19, 2019 |
Standard for Safety for Electrical Equipment For Measurement, Control and Laboratory Use; Part 1: General Requirements |
12/23/2016 |
Orthopedic |
11-317 |
Complete |
ASTM |
F3129-16 |
Standard Guide for Characterization of Material Loss from Conical Taper Junctions in Total Joint Prostheses |
08/21/2017 |
Anesthesiology |
1-124 |
Complete |
ISO |
8835-7 First edition 2011-11-01 |
Inhalational anaesthesia systems - Part 7: Anaesthetic systems for use in areas with limited logistical supplies of electricity and anaesthetic gases |
08/21/2017 |
Materials |
8-455 |
Complete |
ASTM |
F2902-16 |
Standard Guide for Assessment of Absorbable Polymeric Implants |
12/19/2022 |
Software/ Informatics |
13-123 |
Complete |
ANSI NEMA |
HN 1-2019 |
American National Standard Manufacturer Disclosure Statement for Medical Device Security |
12/19/2022 |
General I (QS/ RM) |
5-139 |
Complete |
ISO |
18250-3 First edition 2018-06 |
Medical devices - Connectors for reservoir delivery systems for healthcare applications - Part 3: Enteral application |
05/29/2023 |
Dental/ ENT |
4-300 |
Complete |
ISO |
22674 Third edition 2022-08 |
Dentistry - Metallic materials for fixed and removable restorations and appliances |
07/15/2019 |
General Plastic Surgery/ General Hospital |
6-422 |
Complete |
AAMI |
TIR38:2019 |
Medical device safety assurance case guidance |
07/06/2020 |
Sterility |
14-543 |
Complete |
ISO |
11139 First edition 2018-08 |
Sterilization of health care products - Vocabulary of terms used in sterilization and related equipment and process standards |
07/06/2020 |
Sterility |
14-544 |
Complete |
ISO |
18472 Second edition 2018-08 |
Sterilization of health care products - Biological and chemical indicators - Test equipment |
07/15/2019 |
General Plastic Surgery/ General Hospital |
6-421 |
Complete |
ISO |
80601-2-56 Second edition 2017-03 |
Medical electrical equipment - Part 2-56: Particular requirements for basic safety and essential performance of clinical thermometers for body temperature measurement. [Including: Amendment 1 (2018)]. |
12/21/2020 |
Dental/ ENT |
4-266 |
Complete |
ISO |
19023 First edition 2018-02 |
Dentistry - Orthodontic anchor screws |
ANSI ADA |
Standard No. 178-2019 |
Orthodontic Anchor Screws |
04/03/2023 |
General II (ES/ EMC) |
19-34 |
Complete |
IEC |
61010-1 Edition 3.1 2017-01 CONSOLIDATED VERSION |
Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 1: General requirements [Including: Corrigendum 1 (2019)]
- Note: This standard is recognized with relevant US national differences applied, see reference #1 in Relevant FDA Guidance and/or Supportive Publication section |
05/29/2023 |
Dental/ ENT |
4-301 |
Complete |
ISO |
21563 Second edition 2021-08 |
Dentistry - Hydrocolloid impression materials |
ANSI ADA |
Standard No. 128-2022 |
Hydrocolloid Impression Materials |
01/14/2019 |
Materials |
8-489 |
Complete |
ASTM |
F3302-18 |
Standard for Additive Manufacturing - Finished Part Properties - Standard Specification for Titanium Alloys via Powder Bed Fusion |
12/23/2016 |
Biocompatibility |
2-189 |
Complete |
ASTM |
F895-11 (Reapproved 2016) |
Standard Test Method for Agar Diffusion Cell Culture Screening for Cytotoxicity |
01/14/2019 |
ObGyn/ Gastroenterology/ Urology |
9-68 |
Complete |
ISO |
23409 First edition 2011-02-15 |
Male Condoms - Requirements and test methods for condoms made from synthetic materials |
12/19/2022 |
Radiology |
12-346 |
Complete |
ISO |
12005 Third edition 2022-05 |
Lasers and laser-related equipment - Test methods for laser beam parameters - Polarization |
12/21/2020 |
Sterility |
14-553 |
Complete |
ASTM |
F2097-20 |
Standard Guide for Design and Evaluation of Primary Flexible Packaging for Medical Products |
04/04/2016 |
Materials |
8-403 |
Complete |
ASTM |
D638-14 |
Standard Test Method for Tensile Properties of Plastics |
12/20/2021 |
Materials |
8-572 |
Complete |
ASTM |
F2565-21 |
Standard Guide for Extensively Irradiation-Crosslinked Ultra-High Molecular Weight Polyethylene Fabricated Forms for Surgical Implant Applications |
12/20/2021 |
Materials |
8-573 |
Complete |
ASTM |
F2695-12(2020) |
Standard Specification for Ultra-High Molecular Weight Polyethylene Powder Blended With Alpha-Tocopherol (Vitamin E) and Fabricated Forms for Surgical Implant Applications |
01/14/2019 |
Nanotechnology |
18-5 |
Complete |
ASTM |
E2859-11 (Reapproved 2017) |
Standard Guide for Size Measurement of Nanoparticles Using Atomic Force Microscopy |
12/19/2022 |
General Plastic Surgery/ General Hospital |
6-484 |
Complete |
ASTM |
F3502-22a |
Standard Specification for Barrier Face Coverings |
05/30/2022 |
Radiology |
12-345 |
Complete |
IEC |
61223-3-7 Edition 1.0 2021-12 |
Evaluation and routine testing in medical imaging departments - Part 3-7: Acceptance and constancy tests - Imaging performance of X-ray equipment for dental cone beam computed tomography |
08/21/2017 |
Dental/ ENT |
4-239 |
Complete |
ANSI AAMI |
CI86:2017 |
Cochlear implant systems: Requirements for safety, functional verification, labeling and reliability reporting |
01/14/2019 |
Biocompatibility |
2-141 |
Complete |
ASTM |
F1984-99 (Reapproved 2018) |
Standard Practice for Testing for Whole Complement Activation in Serum by Solid Materials |
10/04/2004 |
InVitro Diagnostics |
7-104 |
Complete |
CLSI |
H7-A3 |
Procedure for Determining Packed Cell Volume by the Microhematocrit Method - Second Edition; Approved Standard - Third Edition. |
03/18/2009 |
Software/ Informatics |
13-28 |
Complete |
CLSI |
AUTO9-A |
Remote Access to Clinical Laboratory Diagnostic Devices via the Internet; Approved Standard |
08/20/2012 |
Cardiovascular |
3-102 |
Complete |
IEC |
60601-2-31 Edition 2.1 2011-09 |
Medical electrical equipment, Part 2-31: Particular requirements for the basic safety and essential performance of external cardiac pacemakers with internal power source |
03/16/2012 |
Tissue Engineering |
15-31 |
Complete |
ASTM |
F2312-11 (Reapproved 2020) |
Standard Terminology Relating to Tissue Engineered Medical Products |