|
Date of Entry
|
Specialty Task Group Area
|
Recognition Number
|
Extent of Recognition
|
Standards Developing Organization
|
Standard Designation Number and Date
|
Standard Title (click for recognition information)
|
05/29/2023 |
General Plastic Surgery/ General Hospital |
6-490 |
Complete |
ISO |
10555-6 First edition 2015-04-15 [Including AMD1:2019] |
Intravascular catheters - Sterile and single-use catheters - Part 6: Subcutaneous implanted ports [Including AMENDMENT 1 (2019)] |
01/14/2019 |
General Plastic Surgery/ General Hospital |
6-338 |
Complete |
ASTM |
D7866-14 |
Standard Specification for Radiation Attenuating Protective Gloves |
08/06/2013 |
General Plastic Surgery/ General Hospital |
6-295 |
Complete |
AAMI ANSI |
BF7:2012 |
Blood transfusion microfilters |
08/20/2012 |
General Plastic Surgery/ General Hospital |
6-278 |
Complete |
ISO |
11040-5 Third edition 2012-02-15 |
Prefilled syringes - Part 5: Plunger stoppers for injectables |
03/16/2012 |
General Plastic Surgery/ General Hospital |
6-268 |
Complete |
ASTM |
F921-10 (Reapproved 2018) |
Standard Terminology Relating to Hemostatic Forceps |
01/30/2014 |
General Plastic Surgery/ General Hospital |
6-273 |
Complete |
ISO |
23908 First edition 2011-06-11 |
Sharps injury protection - Requirements and test methods - Sharps protection features for single-use hypodermic needles, introducers for catheters and needles used for blood sampling |
08/06/2013 |
General Plastic Surgery/ General Hospital |
6-179 |
Complete |
ISO |
21649 First edition 2006-06-01 |
Needle-free injectors for medical use -- Requirements and test methods |
12/20/2021 |
General Plastic Surgery/ General Hospital |
6-471 |
Complete |
USP-NF |
M88880_05_01 |
Sterile Water for Irrigation |
08/14/2015 |
General Plastic Surgery/ General Hospital |
6-354 |
Complete |
ASTM |
D7907-14 (Reapproved 2019) |
Standard Test Methods for Determination of Bactericidal Efficacy on the Surface of Medical Examination Gloves |
05/29/2023 |
General Plastic Surgery/ General Hospital |
6-495 |
Complete |
ISO |
20698 First Edition 2018-07 |
Catheter systems for neuraxial application - Sterile and single-use catheters and accessories |
09/21/2016 |
General Plastic Surgery/ General Hospital |
6-379 |
Complete |
ISO |
7864 Fourth edition 2016-08-01 |
Sterile hypodermic needles for single use - Requirements and test methods |
12/19/2022 |
General Plastic Surgery/ General Hospital |
6-484 |
Complete |
ASTM |
F3502-22a |
Standard Specification for Barrier Face Coverings |
12/20/2021 |
General Plastic Surgery/ General Hospital |
6-466 |
Complete |
USP-NF |
M76070_03_01 |
Sodium Chloride Injection |
05/30/2022 |
General Plastic Surgery/ General Hospital |
6-477 |
Complete |
ISO |
11608-3:2022 |
Needle-based injection systems for medical use - Requirements and test methods - Part 3: Containers and integrated fluid paths |
05/30/2022 |
General Plastic Surgery/ General Hospital |
6-475 |
Complete |
ISO |
11608-4:2022 |
Needle-based injection systems for medical use - Requirements and test methods - Part 4: Needle-based injection systems containing electronics |
05/30/2022 |
General Plastic Surgery/ General Hospital |
6-479 |
Complete |
ISO |
11608-5:2022 |
Needle-based injection systems for medical use - Requirements and test methods - Part 5: Automated functions |
12/20/2021 |
General Plastic Surgery/ General Hospital |
6-465 |
Complete |
USP-NF |
M76090_03_01 |
Sodium Chloride Irrigation |
12/20/2021 |
General Plastic Surgery/ General Hospital |
6-472 |
Complete |
USP-NF |
M36660_04_01 |
Heparin Lock Flush Solution |
05/30/2022 |
General Plastic Surgery/ General Hospital |
6-480 |
Complete |
ISO |
11608-6:2022 |
Needle-based injection systems for medical use - Requirements and test methods - Part 6: On-body delivery |
12/20/2021 |
General Plastic Surgery/ General Hospital |
6-467 |
Complete |
USP-NF |
M80200_04_01 |
Nonabsorbable Surgical Suture |
12/20/2021 |
General Plastic Surgery/ General Hospital |
6-468 |
Complete |
USP-NF |
M99670_02_01 |
<881> Tensile Strength |
12/20/2021 |
General Plastic Surgery/ General Hospital |
6-469 |
Complete |
USP-NF |
M99650_02_01 |
<861> Sutures - Diameter |
12/20/2021 |
General Plastic Surgery/ General Hospital |
6-470 |
Complete |
USP-NF |
M99660_03_01 |
<871> Sutures - Needle Attachment |
05/30/2022 |
General Plastic Surgery/ General Hospital |
6-481 |
Complete |
ANSI AAMI |
CN27:2021 |
General requirements for Luer activated valves (LAVs) incorporated into medical devices for intravascular applications |
05/30/2022 |
General Plastic Surgery/ General Hospital |
6-482 |
Complete |
AAMI |
TIR101:2021 |
Fluid delivery performance testing for infusion pumps |
05/30/2022 |
General Plastic Surgery/ General Hospital |
6-478 |
Complete |
ISO |
11608-1:2022 |
Needle-based injection systems for medical use - Requirements and test methods - Part 1: Needle-based injection systems |
09/17/2018 |
General II (ES/ EMC) |
19-19 |
Partial |
IEC |
TR 60601-4-2 Edition 1.0 2016-05 |
Medical electrical equipment - Part 4-2: Guidance and interpretation - Electromagnetic immunity: performance of medical electrical equipment and medical electrical systems |
06/07/2021 |
General II (ES/ EMC) |
19-40 |
Complete |
IEC |
60086-4 Edition 5.0 2019-04 |
Primary batteries - Part 4: Safety of lithium batteries [Including: Corrigendum 1 (2019) and Corrigendum 2 (2020)] |
12/20/2021 |
General II (ES/ EMC) |
19-43 |
Partial |
IEC |
61326-2-6 Edition 3.0 2020-10 |
Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-6: Particular requirements - In vitro diagnostic (IVD) medical equipment |
12/20/2021 |
General II (ES/ EMC) |
19-42 |
Partial |
IEC |
61326-1 Edition 3.0 2020-10 |
Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 1: General requirements |
12/21/2020 |
General II (ES/ EMC) |
19-38 |
Partial |
IEC |
60601-1-11 Edition 2.1 2020-07 CONSOLIDATED VERSION |
Medical electrical equipment - Part 1-11: General requirements for basic safety and essential performance - Collateral Standard: Requirements for medical electrical equipment and medical electrical systems used in the home healthcare environment |
12/21/2020 |
General II (ES/ EMC) |
19-36 |
Partial |
IEC |
60601-1-2 Edition 4.1 2020-09 CONSOLIDATED VERSION |
Medical electrical equipment - Part 1-2: General requirements for basic safety and essential performance - Collateral Standard: Electromagnetic disturbances - Requirements and tests |
ANSI AAMI IEC |
60601-1-2:2014 [Including AMD 1:2021] |
Medical electrical equipment - Part 1-2: General requirements for basic safety and essential performance - Collateral Standard: Electromagnetic disturbances - Requirements and tests [Including Amendment 1 (2021)] |
02/07/2022 |
General II (ES/ EMC) |
19-45 |
Complete |
AIM |
Standard 7351731 Rev. 3.00 2021-06-04 |
Medical Electrical Equipment and System Electromagnetic Immunity Test for Exposure to Radio Frequency Identification Readers - An AIM Standard |
04/03/2023 |
General II (ES/ EMC) |
19-49 |
Complete |
IEC |
60601-1 Edition 3.2 2020-08 CONSOLIDATED VERSION |
Medical electrical equipment - Part 1: General requirements for basic safety and essential performance
- Note: This standard is recognized with relevant US national differences applied, see references #1 and #2 in the Relevant FDA Guidance and/or Supportive Publication section below. |
12/19/2022 |
General II (ES/ EMC) |
19-48 |
Complete |
IEEE ANSI |
USEMCSC C63.27-2021 |
American National Standard for Evaluation of Wireless Coexistence |
12/20/2021 |
General II (ES/ EMC) |
19-44 |
Complete |
IEEE ANSI |
C63.24-2021 |
American National Standard - Recommended Practice for In Situ RF Immunity Evaluation of Electronic Devices and Systems |
08/21/2017 |
General II (ES/ EMC) |
19-27 |
Complete |
IEC |
62485-3 Edition 2.0 2014-07 |
Safety requirements for secondary batteries and battery installations - Part 3: Traction batteries |
07/09/2014 |
General II (ES/ EMC) |
19-11 |
Complete |
UL |
2054 2nd Edition |
Household and Commercial Batteries |
12/23/2019 |
General II (ES/ EMC) |
19-13 |
Complete |
IEC |
62133 Edition 2.0 2012-12 |
Secondary cells and batteries containing alkaline or other non-acid electrolytes - Safety requirements for portable sealed secondary cells, and for batteries made from them, for use in portable applications [Including: Corrigendum 1 (2013)] |
08/21/2017 |
General II (ES/ EMC) |
19-24 |
Complete |
IEC |
60086-5 Edition 4.0 2016-07 |
Primary batteries - Part 5: Safety of batteries with aqueous electrolyte |
08/21/2017 |
General II (ES/ EMC) |
19-26 |
Complete |
IEC |
62485-2 Edition 1.0 2010-06 |
Safety requirements for secondary batteries and battery installations - Part 2: Stationary batteries. |
08/21/2017 |
General II (ES/ EMC) |
19-28 |
Complete |
IEC |
62485-4 Edition 1.0 2015-01 |
Safety requirements for secondary batteries and battery installations - Part 4: Valve-regulated lead-acid batteries for use in portable appliances |
09/17/2018 |
General II (ES/ EMC) |
19-31 |
Complete |
IEEE ANSI |
C63.15-2017 (Revision of ANSI C63.15-2010) |
American National Standard Recommended Practice for the Immunity Measurement of Electrical and Electronic Equipment |
08/21/2017 |
General II (ES/ EMC) |
19-25 |
Complete |
IEC |
62485-1 Edition 1.0 2015-04 |
Safety requirements for secondary batteries and battery installations - Part 1: General safety information. |
07/09/2014 |
General II (ES/ EMC) |
19-10 |
Complete |
UL |
1642 5th Edition |
Lithium Batteries |
12/23/2019 |
General II (ES/ EMC) |
19-32 |
Complete |
IEC |
62133-1 Edition 1.0 2017-02 |
Secondary cells and batteries containing alkaline or other non-acid electrolytes - Safety requirements for portable sealed secondary cells, and for batteries made from them, for use in portable applications - Part 1: Nickel systems |
12/23/2019 |
General II (ES/ EMC) |
19-33 |
Complete |
IEC |
62133-2 Edition1.0 2017-02 |
Secondary cells and batteries containing alkaline or other non-acid electrolytes - Safety requirements for portable sealed secondary cells, and for batteries made from them, for use in portable applications - Part 2: Lithium systems |
12/20/2021 |
General II (ES/ EMC) |
19-41 |
Complete |
ANSI UL |
61010-1 3rd Ed, dated May 12, 2012 with revision through July 19, 2019 |
Standard for Safety for Electrical Equipment For Measurement, Control and Laboratory Use; Part 1: General Requirements |
04/03/2023 |
General II (ES/ EMC) |
19-34 |
Complete |
IEC |
61010-1 Edition 3.1 2017-01 CONSOLIDATED VERSION |
Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 1: General requirements [Including: Corrigendum 1 (2019)]
- Note: This standard is recognized with relevant US national differences applied, see reference #1 in Relevant FDA Guidance and/or Supportive Publication section |
12/23/2016 |
General II (ES/ EMC) |
19-20 |
Complete |
IEEE ANSI |
C63.16-2016 (Revision of ANSI C63.16-1993) |
American National Standard Guide for Electrostatic Discharge Test Methodologies and Acceptance Criteria for Electronic Equipment |
04/04/2016 |
General II (ES/ EMC) |
19-17 |
Complete |
IEEE ANSI |
C63.18-2014 |
American National Standard Recommended Practice for an On-Site, Ad Hoc Test Method for Estimating Electromagnetic Immunity of Medical Devices to Radiated Radio-Frequency (RF) Emissions from RF Transmitters |
12/21/2020 |
General II (ES/ EMC) |
19-37 |
Complete |
IEC |
60601-1-10 Edition 1.2 2020-07 CONSOLIDATED VERSION |
Medical electrical equipment - Part 1-10: General requirements for basic safety and essential performance - Collateral Standard: Requirements for the development of physiologic closed-loop controllers |
07/15/2019 |
General II (ES/ EMC) |
19-35 |
Complete |
UL |
Standard for Standby Batteries |
1989 Edition 5, 2013-10-02, ANSI November 2018 |
08/21/2017 |
General II (ES/ EMC) |
19-22 |
Complete |
AAMI |
TIR69:2017/(R2020) |
Technical Information Report Risk management of radio-frequency wireless coexistence for medical devices and systems. |
12/21/2020 |
General II (ES/ EMC) |
19-39 |
Complete |
IEC |
60601-1-12 Edition 1.1 2020-07 CONSOLIDATED VERSION |
Medical electrical equipment - Part 1-12: General requirements for basic safety and essential performance - Collateral Standard: Requirements for medical electrical equipment and medical electrical systems intended for use in the emergency medical services environment |
ANSI AAMI IEC |
60601-1-12:2016 [Including AMD 1:2021] |
Medical electrical equipment - Part 1-12: General requirements for basic safety and essential performance - Collateral Standard: Requirements for medical electrical equipment and medical electrical systems intended for use in the emergency [Including Amendment 1(2021)] |
05/30/2022 |
General II (ES/ EMC) |
19-47 |
Complete |
ANSI AAMI |
HA60601-1-11:2015 [Including AMD1:2021] |
Medical Electrical Equipment -- Part 1-11: General requirements for basic safety and essential performance -- Collateral Standard: Requirements for medical electrical equipment and medical electrical equipment and medical electrical systems used in the home healthcare environment (IEC 60601-1-11:2015 MOD) [Including Amendment1 (2021)] |
05/30/2022 |
General II (ES/ EMC) |
19-46 |
Complete |
ANSI AAMI |
ES60601-1:2005/(R)2012 & A1:2012, C1:2009/(R)2012 & A2:2010/(R)2012 (Cons. Text) [Incl. AMD2:2021] |
Medical electrical equipment - Part 1: General requirements for basic safety and essential performance (IEC 60601-1:2005, MOD) [Including Amendment 2 (2021)] |
12/21/2020 |
General I (QS/ RM) |
5-132 |
Complete |
IEC |
60601-1-6 Edition 3.2 2020-07 CONSOLIDATED VERSION |
Medical electrical equipment - Part 1-6: General requirements for basic safety and essential performance - Collateral standard: Usability |
12/21/2020 |
General I (QS/ RM) |
5-133 |
Complete |
ISO |
80369-7 Second edition 2021-05 |
Small-bore connectors for liquids and gases in healthcare applications - Part 7: Connectors for intravascular or hypodermic applications |
07/06/2020 |
General I (QS/ RM) |
5-129 |
Complete |
IEC |
62366-1 Edition 1.1 2020-06 CONSOLIDATED VERSION |
Medical devices - Part 1: Application of usability engineering to medical devices |
ANSI AAMI IEC |
62366-1:2015+AMD1:2020 (Consolidated Text) |
Medical devices Part 1: Application of usability engineering to medical devices, including Amendment 1 |
06/27/2016 |
General I (QS/ RM) |
5-57 |
Partial |
ANSI AAMI |
HE75:2009/(R)2018 |
Human factors engineering - Design of medical devices |
12/21/2020 |
General I (QS/ RM) |
5-131 |
Complete |
IEC |
60601-1-8 Edition 2.2 2020-07 CONSOLIDATED VERSION |
Medical electrical equipment - Part 1-8: General requirements for basic safety and essential performance - Collateral Standard: General requirements, tests and guidance for alarm systems in medical electrical equipment and medical electrical systems |
ANSI AAMI IEC |
60601-1-8:2006 and A1:2012 [Including AMD 2:2021] |
Medical Electrical Equipment - Part 1-8: General requirements for basic safety and essential performance ¿ Collateral Standard: General requirements, tests and guidance for alarm systems in medical electrical equipment and medical electrical systems [Including Amendment 2 (2021)] |
07/06/2020 |
General I (QS/ RM) |
5-130 |
Complete |
ISO |
7010 Third edition 2019-07 |
Graphical symbols - Safety colours and safety signs - Registered safety signs |
01/14/2019 |
General I (QS/ RM) |
5-122 |
Complete |
ASME |
V&V 40-2018 |
Assessing Credibility of Computational Modeling Through Verification and Validation: Application to Medical Devices |
12/23/2019 |
General I (QS/ RM) |
5-125 |
Complete |
ISO |
14971 Third Edition 2019-12 |
Medical devices - Application of risk management to medical devices |
ANSI AAMI ISO |
14971: 2019 |
Medical devices - Applications of risk management to medical devices |
07/06/2020 |
General I (QS/ RM) |
5-127 |
Complete |
ISTA |
3B 2017 |
Packaged-Products for Less-Than-Truckload (LTL) Shipment |
07/06/2020 |
General I (QS/ RM) |
5-128 |
Complete |
ISTA |
3E 2017 |
Similar Packaged-Products in Unitized Loads of Truckload Shipment |
01/14/2019 |
General I (QS/ RM) |
5-121 |
Complete |
ISO |
80369-1 Second edition 2018-11 |
Small-bore connectors for liquids and gases in healthcare applications - Part 1: General requirements |
07/15/2019 |
General I (QS/ RM) |
5-123 |
Complete |
ISO |
80369-3 First Edition 2016-07-01 |
Small-bore connectors for liquids and gases in healthcare applications - Part 3: Connectors for enteral applications [Including AMENDMENT 1 (2019)]. |
01/14/2019 |
General I (QS/ RM) |
5-120 |
Complete |
IEC |
60812 Edition 3.0 2018-08 |
Analysis techniques for system reliability - Procedure for failure mode and effects analysis (FMEA) |
12/23/2019 |
General I (QS/ RM) |
5-124 |
Complete |
ISO |
7000 Sixth edition 2019-07 |
Graphical symbols for use on equipment - Registered symbols |
04/04/2016 |
General I (QS/ RM) |
5-98 |
Complete |
ANSI ESD |
S20.20-2014 |
Standard for the Development of an Electrostatic Discharge Control Program for Protection of Electrical and Electronic Parts, Assemblies and Equipment (Excluding Electrically Initiated Explosive Devices) |
09/17/2018 |
General I (QS/ RM) |
5-42 |
Complete |
ASTM |
D903-98 (Reapproved 2017) |
Standard Test Methods for Peel or Stripping Strength of Adhesive Bonds |
08/21/2017 |
General I (QS/ RM) |
5-107 |
Complete |
IEC |
80369-5: Edition 1.0 2016-03 |
Small-bore connectors for liquids and gases in healthcare applications - Part 5: Connectors for limb cuff inflation applications.[Including Corrigendum 1 (2017) and Corrigendum 2 (2021)] |
ANSI AAMI ISO |
80369-5:2016 |
Small-bore connectors for liquids and gases in healthcare applications - Part 5: Connectors for limb cuff inflation applications |
01/30/2014 |
General I (QS/ RM) |
5-84 |
Complete |
AAMI |
TIR 49:2013/(R)2020 |
Technical Information Report Design of training and instructional materials for medical devices used in non-clinical environments |
01/27/2015 |
General I (QS/ RM) |
5-48 |
Complete |
ANSI |
Z1.9-2003 (R2018) |
Sampling Procedures and Tables for Inspection by Variables for Percent Nonconforming |
07/09/2014 |
General I (QS/ RM) |
5-88 |
Complete |
ISO |
2859-1 Second edition 1999-11-15 |
Sampling procedures for inspection by attributes - Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection [Including: Technical Corrigendum 1 (2001), Amendment 1 (2011)] |
06/27/2016 |
General I (QS/ RM) |
5-108 |
Complete |
ISO |
80369-6 First Edition 2016-03-15 |
Small bore connectors for liquids and gases in healthcare applications - Part 6: Connectors for neuraxial applications. |
01/30/2014 |
General I (QS/ RM) |
5-47 |
Complete |
ISO |
10012 First edition 2003-01-15 |
Measurement management systems - Requirements for measurement processes and measuring equipment |
06/15/2016 |
General I (QS/ RM) |
5-102 |
Complete |
IEC |
60417:2002 DB |
Graphical symbols for use on equipment |
12/19/2022 |
General I (QS/ RM) |
5-141 |
Complete |
ASME |
V&V 20-2009 (R2021) |
Standard for Verification and Validation in Computational Fluid Dynamics and Heat Transfer |
12/23/2016 |
General I (QS/ RM) |
5-113 |
Complete |
ASTM |
D7386-16 |
Standard Practice for Performance Testing of Packages for Single Delivery Systems |
01/27/2015 |
General I (QS/ RM) |
5-62 |
Complete |
ANSI ASQ |
Z1.4-2003 (R2018) |
Sampling Procedures and Tables for Inspection by Attributes |
08/14/2015 |
General I (QS/ RM) |
5-97 |
Complete |
ISO |
80369-20 First edition 2015-05-15 |
Small-bore connectors for liquids and gases in healthcare applications - Part 20: Common test methods |
ANSI AAMI ISO |
80369-20:2015 |
Small-bore connectors for liquids and gases in healthcare applications - Part 20: Common test methods |
12/20/2021 |
General I (QS/ RM) |
5-134 |
Complete |
ISO |
15223-1 Fourth edition 2021-07 |
Medical devices - Symbols to be used with information to be supplied by the manufacturer - Part 1: General requirements |
12/19/2022 |
General I (QS/ RM) |
5-137 |
Complete |
IEC |
TR 60878 Ed. 4.0 2022-11 |
Graphical symbols for electrical equipment in medical practice [Including: Corrigendum 1 (2023)] |
12/19/2022 |
General I (QS/ RM) |
5-136 |
Complete |
ASTM |
D4332-22 |
Standard Practice for Conditioning Containers, Packages, or Packaging Components for Testing |
12/19/2022 |
General I (QS/ RM) |
5-140 |
Complete |
ASME |
V&V 10-2019 |
Standard for Verification and Validation in Computational Solid Mechanics |
12/19/2022 |
General I (QS/ RM) |
5-135 |
Complete |
ISO |
20417 First edition 2021-04 Corrected version 2021-12 |
Medical devices - Information to be supplied by the manufacturer |
12/19/2022 |
General I (QS/ RM) |
5-138 |
Complete |
AAMI |
TIR66: 2017/(R)2020 |
Guidance for the creation of physiologic data and waveform databases to demonstrate reasonable assurance of the safety and effectiveness of alarm system algorithms |
12/19/2022 |
General I (QS/ RM) |
5-139 |
Complete |
ISO |
18250-3 First edition 2018-06 |
Medical devices - Connectors for reservoir delivery systems for healthcare applications - Part 3: Enteral application |
07/06/2020 |
General I (QS/ RM) |
5-126 |
Complete |
ISTA |
3A 2018 |
Packaged-Products for Parcel Delivery System Shipment 70 kg (150 lb) or Less |
07/15/2019 |
Dental/ ENT |
4-259 |
Partial |
ISO |
14801 Third edition 2016-11-01 |
Dentistry - Implants - Dynamic loading test for endosseous dental implants |
ANSI ADA |
Standard No. 127-2018 |
Dynamic Loading Test for Endosseous Dental Implants |
06/07/2021 |
Dental/ ENT |
4-276 |
Partial |
ISO |
14457 Second edition 2017-10 |
Dentistry - Handpieces and motors |
ANSI ADA |
Standard No. 35-2019 |
Dental Handpieces and Motors |
06/07/2021 |
Dental/ ENT |
4-280 |
Partial |
ANSI ADA |
Standard No. 117-2018 |
Fluoride varnishes |
05/29/2023 |
Dental/ ENT |
4-306 |
Partial |
ISO |
22052 First edition 2020-06 |
Dentistry - Compressed air source equipment |
ANSI ADA |
Standard No. 94-2021 |
Central Compressed Air Source Equipment |
12/18/2023 |
Dental/ ENT |
4-319 |
Partial |
ISO |
17730 Second edition 2020-09 |
Dentistry - Fluoride varnishes |
ANSI ADA |
Standard No. 117-2022 |
Dentistry - Fluoride Varnishes |
01/14/2019 |
Dental/ ENT |
4-257 |
Partial |
ISO |
17730 First edition 2014-11-01 |
Dentistry - Fluoride varnishes |
05/29/2023 |
Dental/ ENT |
4-305 |
Partial |
ISO |
10637 Second edition 2018-05 |
Dentistry - Central suction source equipment |
ANSI ADA |
Standard No. 177-2020 |
Central Suction Source Equipment |
01/14/2019 |
Dental/ ENT |
4-162 |
Complete |
ANSI ASA |
S3.4-2007 (Reaffirmed 2020) |
American National Standard Procedure for the Computation of Loudness of Steady Sounds |