|
|
|
Date of
Entry
|
Specialty Task
Group Area
|
Recognition
Number
|
Extent of
Recognition
|
Standards
Developing
Organization
|
Standard Designation
Number and Date
|
Standard Title
(click for recognition information)
|
| 12/19/2022 |
InVitro Diagnostics |
7-314 |
Partial |
CLSI |
M27M44S, 3rd Edition |
Performance Standards for Antifungal Susceptibility Testing of Yeasts |
| 09/21/2016 |
InVitro Diagnostics |
7-265 |
Partial |
CLSI |
C62-A |
Liquid Chromatography-Mass Spectrometry Methods; Approved Guideline. |
| 12/18/2023 |
InVitro Diagnostics |
7-320 |
Partial |
CLSI |
H62 1st Edition |
Validation of Assays Performed by Flow Cytometry |
| 06/07/2021 |
InVitro Diagnostics |
7-236 |
Partial |
CLSI |
M43-A October 2011 |
Methods for Antimicrobial Susceptibility Testing for Human Mycoplasmas; Approved Guideline |
| 07/06/2020 |
InVitro Diagnostics |
7-296 |
Partial |
CLSI |
EP09c 3rd Edition |
Measurement Procedure Comparison and Bias Estimation Using Patient Samples |
| 06/07/2021 |
General Plastic Surgery/
General Hospital |
6-461 |
Complete |
IEC |
60601-2-19 Edition 3.0 2020-09 |
Medical electrical equipment - Part 2-19: Particular requirements for the basic safety and essential performance of infant incubators |
| 06/07/2021 |
General Plastic Surgery/
General Hospital |
6-462 |
Complete |
IEC |
60601-2-20 Edition 3.0 2020-09 |
Medical electrical equipment - Part 2-20: Particular requirements for the basic safety and essential performance of infant transport incubators |
| 05/30/2022 |
General Plastic Surgery/
General Hospital |
6-476 |
Complete |
ISO |
11608-2:2022 |
Needle-based injection systems for medical use - Requirements and test methods - Part 2: Double-ended pen needles |
| 12/23/2019 |
General Plastic Surgery/
General Hospital |
6-438 |
Complete |
IEC |
80601-2-77 Edition 1.0 2019-07 |
Medical electrical equipment - Part 2-77: Particular requirements for the BASIC SAFETY and essential performance of ROBOTICALLY ASSISTED SURGICAL EQUIPMENT |
| ANSI AAMI IEC |
80601-2-77:2020 |
Medical electrical equipment - Part 2-77: Particular requirements for the basic safety and essential performance of robotically assisted surgical equipment |
| 09/21/2016 |
General Plastic Surgery/
General Hospital |
6-381 |
Complete |
ISO |
6009 Fourth edition 2016-08-01 |
Hypodermic needles for single use - Colour coding for identification. |
| 12/21/2020 |
General Plastic Surgery/
General Hospital |
6-450 |
Complete |
IEC |
60601-2-50 Edition 3.0 2020-09 |
Medical electrical equipment - Part 2-50: Particular requirements for the basic safety and essential performance of infant phototherapy equipment |
| 12/23/2019 |
General Plastic Surgery/
General Hospital |
6-437 |
Complete |
ISO |
23907-2 First edition 2019-11 |
Sharps injury protection - Requirements and test methods - Part 2: Reusable sharps containers. |
| 06/07/2018 |
General Plastic Surgery/
General Hospital |
6-214 |
Complete |
ASTM |
D6355-07(2022) |
Standard Test Method for Human Repeat Insult Patch Testing of Medical Gloves |
| 03/16/2012 |
General Plastic Surgery/
General Hospital |
6-272 |
Complete |
ASTM |
F2062-00 (Reapproved 2018) |
Standard Specification for Square Drive Interconnections on Surgical Instruments |
| 12/23/2019 |
General Plastic Surgery/
General Hospital |
6-424 |
Complete |
ASTM |
D5151-19(2023) |
Standard Test Method for Detection of Holes in Medical Gloves |
| 06/07/2021 |
General Plastic Surgery/
General Hospital |
6-463 |
Complete |
IEC |
60601-2-21 Edition 3.0 2020-09 |
Medical electrical equipment - Part 2-21: Particular requirements for the basic safety and essential performance of infant radiant warmers |
| 12/23/2019 |
General Plastic Surgery/
General Hospital |
6-426 |
Complete |
ISO |
23907-1 First edition 2019-01 |
Sharps injury protection - Requirements and test methods - Sharps containers |
| 07/06/2020 |
General Plastic Surgery/
General Hospital |
6-447 |
Complete |
ISO |
8536-4 Sixth edition 2019-09 |
Infusion equipment for medical use - Part 4: Infusion sets for single use, gravity feed |
| 06/27/2016 |
General Plastic Surgery/
General Hospital |
6-363 |
Complete |
ISO |
11810 Second edition 2015-12-15 |
Lasers and laser-related equipment - Test method and classification for the laser-resistance of surgical drapes and/or patient-protective covers - Primary ignition, penetration, flame spread and secondary ignition |
| 01/14/2019 |
General Plastic Surgery/
General Hospital |
6-410 |
Complete |
ISO |
8536-6 Third edition 2016-12-01 |
Infusion equipment for medical use - Part 6: Freeze drying closures for infusion bottles |
| 01/30/2014 |
General Plastic Surgery/
General Hospital |
6-306 |
Complete |
ASTM |
F1671/F1671M-13 |
Standard Test Method for Resistance of Materials Used in Protective Clothing to Penetration by Blood-Borne Pathogens Using Phi-X174 Bacteriophage Penetration as a Test System |
| 05/29/2023 |
General Plastic Surgery/
General Hospital |
6-489 |
Complete |
IEC |
60601-2-52 Edition 1.1 2015-03 CONSOLIDATED VERSION |
Medical electrical equipment - Part 2-52: Particular requirements for the basic safety and essential performance of medical beds
|
| 05/29/2023 |
General Plastic Surgery/
General Hospital |
6-486 |
Complete |
ISO |
10535 Third edition 2021-10 |
Assistive products - Hoists for the transfer of disabled persons - Requirements and test methods |
| 07/06/2020 |
General Plastic Surgery/
General Hospital |
6-439 |
Complete |
ISO |
7886-2 Second edition 2020-04 |
Sterile hypodermic syringes for single use - Part 2: Syringes for use with power-driven syringe pumps |
| 07/15/2019 |
General Plastic Surgery/
General Hospital |
6-422 |
Complete |
AAMI |
TIR38:2019 |
Medical device safety assurance case guidance |
| 07/15/2019 |
General Plastic Surgery/
General Hospital |
6-421 |
Complete |
ISO |
80601-2-56 Second edition 2017-03 |
Medical electrical equipment - Part 2-56: Particular requirements for basic safety and essential performance of clinical thermometers for body temperature measurement. [Including: Amendment 1 (2018)]. |
| 04/04/2016 |
General Plastic Surgery/
General Hospital |
6-355 |
Complete |
ASTM |
D3772-15(2021) |
Standard Specification for Industrial Rubber Finger Cots |
| 12/23/2019 |
General Plastic Surgery/
General Hospital |
6-425 |
Complete |
ASTM |
F2100-19 |
Standard Specification for Performance of Materials Used in Medical Face Masks |
| 09/21/2016 |
General Plastic Surgery/
General Hospital |
6-382 |
Complete |
ISO |
11608-7 First edition 2016-08-01 |
Needle-based injection systems for medical use - Requirements and test methods - Part 7: Accessibility for persons with visual impairment |
| 05/29/2023 |
General Plastic Surgery/
General Hospital |
6-488 |
Complete |
ASTM |
F1671/F1671M-22 |
Standard Test Method for Resistance of Materials Used in Protective Clothing to Penetration by Blood-Borne Pathogens Using Phi-X174 Bacteriophage Penetration as a Test System |
| 09/21/2016 |
General Plastic Surgery/
General Hospital |
6-380 |
Complete |
ISO |
9626 Second edition 2016-08-01 |
Stainless steel needle tubing for the manufacture of medical devices - Requirements and test methods |
| 01/30/2014 |
General Plastic Surgery/
General Hospital |
6-321 |
Complete |
IEC |
60601-2-52 Edition 1.0 2009-12 |
Medical electrical equipment - Part 2-52: Particular requirements for basic safety and essential performance of medical beds [Including: Technical Corrigendum 1 (2010)] |
| 09/17/2018 |
General Plastic Surgery/
General Hospital |
6-409 |
Complete |
ASTM |
F703-18 |
Standard Specification for Implantable Breast Prostheses |
| 08/06/2013 |
General Plastic Surgery/
General Hospital |
6-216 |
Complete |
ISO |
8536-7 Third edition 2009-01-15 |
Infusion equipment for medical use - Part 7: Caps made of aluminum-plastics combinations for infusion bottles |
| 06/07/2018 |
General Plastic Surgery/
General Hospital |
6-407 |
Complete |
ASTM |
F3186-17 |
Standard Specification for Adult Portable Bed Rails and Related Products |
| 06/07/2018 |
General Plastic Surgery/
General Hospital |
6-404 |
Complete |
ISO |
7886-1 Second edition 2017-05 |
Sterile hypodermic syringes for single use - Part 1: Syringes for manual use |
| 08/14/2015 |
General Plastic Surgery/
General Hospital |
6-353 |
Complete |
ASTM |
F2051-00 (Reapproved 2014) |
Standard Specification for Implantable Saline Filled Breast Prosthesis |
| 08/14/2015 |
General Plastic Surgery/
General Hospital |
6-110 |
Complete |
ASTM |
F1441-03 (Reapproved 2014) |
Standard Specification for Soft-Tissue Expander Devices |
| 06/07/2018 |
General Plastic Surgery/
General Hospital |
6-401 |
Complete |
ASTM |
D7160-16 |
Standard Practice for Determination of Expiration Dating for Medical Gloves |
| 06/07/2018 |
General Plastic Surgery/
General Hospital |
6-270 |
Complete |
ASTM |
F1840-10 (Reapproved 2016) |
Standard Terminology for Surgical Suture Needles |
| 05/29/2023 |
General Plastic Surgery/
General Hospital |
6-491 |
Complete |
ASTM |
F1670/F1670M-17a |
Standard Test Method for Resistance of Materials Used in Protective Clothing to Penetration by Synthetic Blood |
| 06/07/2018 |
General Plastic Surgery/
General Hospital |
6-402 |
Complete |
ASTM |
F1670/F1670M-17 |
Standard Test Method for Resistance of Materials Used in Protective Clothing to Penetration by Synthetic Blood |
| 01/14/2019 |
General Plastic Surgery/
General Hospital |
6-411 |
Complete |
ASTM |
D6499-18 |
Standard Test Method for Immunological Measurement of Antigenic Protein in Hevea Natural Rubber (HNR) and its Products |
| 04/04/2016 |
General Plastic Surgery/
General Hospital |
6-356 |
Complete |
ASTM |
D5712-15(2020) |
Standard Test Method for Analysis of Aqueous Extractable Protein in Natural Rubber in Latex, Natural Rubber, and Elastomeric Products Using the Modified Lowry Method |
| 04/04/2016 |
General Plastic Surgery/
General Hospital |
6-357 |
Complete |
ISO |
10555-6 First edition 2015-04-15 |
Intravascular catheters - Sterile and single-use catheters - Part 6: Subcutaneous implanted ports |
| 12/20/2021 |
General Plastic Surgery/
General Hospital |
6-473 |
Complete |
USP-NF |
M80190_04_01 |
Absorbable Surgical Suture |
| 08/06/2013 |
General Plastic Surgery/
General Hospital |
6-147 |
Complete |
ASTM |
D6978-05(2023) |
Standard Practice for Assessment of Resistance of Medical Gloves to Permeation by Chemotherapy Drugs |
| 09/17/2018 |
General Plastic Surgery/
General Hospital |
6-123 |
Complete |
ASTM |
E667-98 (Reapproved 2017) |
Standard Specification for Mercury-in-Glass, Maximum Self-Registering Clinical Thermometers |
| 07/15/2019 |
General Plastic Surgery/
General Hospital |
6-423 |
Complete |
IEC |
60601-2-6 Edition 2.1 2016-04 |
CONSOLIDATED VERSION Medical electrical equipment - Part 2-6: Particular requirements for the basic safety and essential performance of microwave therapy equipment |
| 05/29/2023 |
General Plastic Surgery/
General Hospital |
6-492 |
Complete |
ASTM |
F2100-23 |
Standard Specification for Performance of Materials Used in Medical Face Masks |
| 08/21/2017 |
General Plastic Surgery/
General Hospital |
6-384 |
Complete |
ISO |
1135-4 Sixth edition 2015-12-01 |
Transfusion equipment for medical use-Part 4: Transfusion sets for single use, gravity feed |
| 08/21/2017 |
General Plastic Surgery/
General Hospital |
6-125 |
Complete |
ASTM |
E1965-98 (Reapproved 2016) |
Standard Specification for Infrared Thermometers for Intermittent Determination of Patient Temperature |
| 08/21/2017 |
General Plastic Surgery/
General Hospital |
6-400 |
Complete |
ASTM |
F3212-16(2023) |
Standard Test Method for Coring Testing of Huber Needles |
| 07/06/2020 |
General Plastic Surgery/
General Hospital |
6-441 |
Complete |
ISO |
7886-3 Second edition 2020-05 |
Sterile hypodermic syringes for single use - Part 3: Auto-disabled syringes for fixed-dose immunization |
| 08/21/2017 |
General Plastic Surgery/
General Hospital |
6-70 |
Complete |
ASTM |
E825-98 (Reapproved 2016) |
Standard Specification for Phase Change-Type Disposable Fever Thermometer for Intermittent Determination of Human Temperature |
| 08/21/2017 |
General Plastic Surgery/
General Hospital |
6-124 |
Complete |
ASTM |
E1104-98 (Reapproved 2016) |
Standard Specification for Clinical Thermometer Probe Covers and Sheaths |
| 05/29/2023 |
General Plastic Surgery/
General Hospital |
6-493 |
Complete |
ASTM |
F2101-23 |
Standard Test Method for Evaluating the Bacterial Filtration Efficiency (BFE) of Medical Face Mask Materials, Using a Biological Aerosol of Staphylococcus aureus |
| 12/23/2019 |
General Plastic Surgery/
General Hospital |
6-427 |
Complete |
ASTM |
F2101-19 |
Standard Test Method for Evaluating the Bacterial Filtration Efficiency (BFE) of Medical Face Mask Materials, Using a Biological Aerosol of Staphylococcus aureus |
| 01/30/2014 |
General Plastic Surgery/
General Hospital |
6-253 |
Complete |
ISO |
10535 Second edition 2006-12-15 |
Hoists for the transfer of disabled persons - Requirements and test methods |
| 12/20/2021 |
General Plastic Surgery/
General Hospital |
6-464 |
Complete |
ISO |
11040-4 Third edition 2015-04-01 |
Prefilled syringes - Part 4: Glass barrels for injectables and sterilized subassembled syringes ready for filling [Including AMENDMENT 1 (2020)] |
| 03/16/2012 |
General Plastic Surgery/
General Hospital |
6-269 |
Complete |
ASTM |
F1078-10 (Reapproved 2018) |
Standard Terminology for Surgical Scissors-Inserted and Non-Inserted Blades |
| 03/16/2012 |
General Plastic Surgery/
General Hospital |
6-271 |
Complete |
ASTM |
F1874-98 (Reapproved 2011) |
Standard Test Method for Bend Testing of Needles Used in Surgical Sutures |
| 08/14/2015 |
General Plastic Surgery/
General Hospital |
6-200 |
Complete |
ASTM |
E1061-01(2022) |
Standard Specification for Direct-Reading Liquid Crystal Forehead Thermometers |
| 08/20/2012 |
General Plastic Surgery/
General Hospital |
6-242 |
Complete |
ISO |
8536-2 Third edition 2010-03-15 |
Infusion equipment for medical use - Part 2: Closures for infusion bottles |
| 12/19/2022 |
General Plastic Surgery/
General Hospital |
6-485 |
Complete |
ISO |
7886-4 Second Edition 2018-11 |
Sterile hypodermic syringes for single use - Part 4: Syringes with re-use prevention feature |
| 05/29/2023 |
General Plastic Surgery/
General Hospital |
6-494 |
Complete |
ASTM |
F3352/F3352M-23a |
Standard Specification for Isolation Gowns Intended for Use in Healthcare Facilities |
| 06/07/2018 |
General Plastic Surgery/
General Hospital |
6-405 |
Complete |
IEC |
80601-2-59 Edition 2.0 2017-09 |
Medical electrical equipment - Part 2-59: Particular requirements for the basic safety and essential performance of screening thermographs for human febrile temperature screening |
| 06/07/2018 |
General Plastic Surgery/
General Hospital |
6-406 |
Complete |
ASTM |
F1862/F1862M-17 |
Standard Test Method for Resistance of Medical Face Masks to Penetration by Synthetic Blood (Horizontal Projection of Fixed Volume at a Known Velocity) |
| 03/18/2009 |
General Plastic Surgery/
General Hospital |
6-215 |
Complete |
ASTM |
F2132-01 (Reapproved 2008)e1 |
Standard Specification for Puncture Resistance of Materials Used in Containers for Discarded Medical Needles and Other Sharps |
| 08/06/2013 |
General Plastic Surgery/
General Hospital |
6-296 |
Complete |
ANSI AAMI |
PB70:2012 |
Liquid barrier performance and classification of protective apparel and drapes intended for use in health care facilities |
| 01/15/2013 |
General Plastic Surgery/
General Hospital |
6-122 |
Complete |
ISO |
8536-5 Second edition 2004-02-01 |
Infusion equipment for medical use - Part 5: Burette infusion sets for single use, gravity feed |
| 08/06/2013 |
General Plastic Surgery/
General Hospital |
6-240 |
Complete |
ISO |
8536-3 Third edition 2009-06-01 |
Infusion equipment for medical use - Part 3: Aluminum caps for infusion bottles |
| 08/06/2013 |
General Plastic Surgery/
General Hospital |
6-276 |
Complete |
ISO |
8536-1 Fourth edition 2011-09-01 |
Infusion equipment for medical use - Part 1: Infusion glass bottles |
| 03/16/2012 |
General Plastic Surgery/
General Hospital |
6-177 |
Complete |
ASTM |
E1112-00(2018) |
Standard Specification for Electronic Thermometer for Intermittent Determination of Patient Temperature |
| 01/30/2014 |
General Plastic Surgery/
General Hospital |
6-117 |
Complete |
ASTM |
F2172-02 (Reapproved 2011) |
Standard Specification for Blood/Intravenous Fluid/Irrigation Fluid Warmers |
| 01/30/2014 |
General Plastic Surgery/
General Hospital |
6-303 |
Complete |
ISO |
10555-5 Second edition 2013-06-15 |
Intravascular catheters -- Sterile and single-use catheters -- Part 5: Over-needle peripheral catheters |
| 01/30/2014 |
General Plastic Surgery/
General Hospital |
6-305 |
Complete |
ISO |
10555-3 Second edition 2013-06-15 |
Intravascular catheters -- Sterile and single-use catheters -- Part 3: Central venous catheters |
| 12/19/2022 |
General Plastic Surgery/
General Hospital |
6-483 |
Complete |
IEC |
60601-2-35 Edition 2.0 2020-09 |
Medical electrical equipment - Part 2-35: Particular requirements for the basic safety and essential performance of heating devices using blankets, pads and mattresses and intended for heating in medical use |
| 08/14/2015 |
General Plastic Surgery/
General Hospital |
6-185 |
Complete |
ASTM |
F881-94 (Reapproved 2014) |
Standard Specification for Silicone Elastomer Facial Implants |
| 01/30/2014 |
General Plastic Surgery/
General Hospital |
6-322 |
Complete |
ISO |
10555-4 Second edition 2013-06-15 |
Intravascular catheters -- Sterile and single-use catheters -- Part 4: Balloon dilatation catheters |
| 05/29/2023 |
General Plastic Surgery/
General Hospital |
6-490 |
Complete |
ISO |
10555-6 First edition 2015-04-15 [Including AMD1:2019] |
Intravascular catheters - Sterile and single-use catheters - Part 6: Subcutaneous implanted ports [Including AMENDMENT 1 (2019)] |
| 01/14/2019 |
General Plastic Surgery/
General Hospital |
6-338 |
Complete |
ASTM |
D7866-14 |
Standard Specification for Radiation Attenuating Protective Gloves |
| 08/06/2013 |
General Plastic Surgery/
General Hospital |
6-295 |
Complete |
AAMI ANSI |
BF7:2012 |
Blood transfusion microfilters |
| 08/20/2012 |
General Plastic Surgery/
General Hospital |
6-278 |
Complete |
ISO |
11040-5 Third edition 2012-02-15 |
Prefilled syringes - Part 5: Plunger stoppers for injectables |
| 03/16/2012 |
General Plastic Surgery/
General Hospital |
6-268 |
Complete |
ASTM |
F921-10 (Reapproved 2018) |
Standard Terminology Relating to Hemostatic Forceps |
| 01/30/2014 |
General Plastic Surgery/
General Hospital |
6-273 |
Complete |
ISO |
23908 First edition 2011-06-11 |
Sharps injury protection - Requirements and test methods - Sharps protection features for single-use hypodermic needles, introducers for catheters and needles used for blood sampling |
| 08/06/2013 |
General Plastic Surgery/
General Hospital |
6-179 |
Complete |
ISO |
21649 First edition 2006-06-01 |
Needle-free injectors for medical use -- Requirements and test methods |
| 12/20/2021 |
General Plastic Surgery/
General Hospital |
6-471 |
Complete |
USP-NF |
M88880_05_01 |
Sterile Water for Irrigation |
| 08/14/2015 |
General Plastic Surgery/
General Hospital |
6-354 |
Complete |
ASTM |
D7907-14 (Reapproved 2019) |
Standard Test Methods for Determination of Bactericidal Efficacy on the Surface of Medical Examination Gloves |
| 05/29/2023 |
General Plastic Surgery/
General Hospital |
6-495 |
Complete |
ISO |
20698 First Edition 2018-07 |
Catheter systems for neuraxial application - Sterile and single-use catheters and accessories |
| 09/21/2016 |
General Plastic Surgery/
General Hospital |
6-379 |
Complete |
ISO |
7864 Fourth edition 2016-08-01 |
Sterile hypodermic needles for single use - Requirements and test methods |
| 12/19/2022 |
General Plastic Surgery/
General Hospital |
6-484 |
Complete |
ASTM |
F3502-22a |
Standard Specification for Barrier Face Coverings |
| 12/20/2021 |
General Plastic Surgery/
General Hospital |
6-466 |
Complete |
USP-NF |
M76070_03_01 |
Sodium Chloride Injection |
| 05/30/2022 |
General Plastic Surgery/
General Hospital |
6-477 |
Complete |
ISO |
11608-3:2022 |
Needle-based injection systems for medical use - Requirements and test methods - Part 3: Containers and integrated fluid paths |
| 05/30/2022 |
General Plastic Surgery/
General Hospital |
6-475 |
Complete |
ISO |
11608-4:2022 |
Needle-based injection systems for medical use - Requirements and test methods - Part 4: Needle-based injection systems containing electronics |
| 05/30/2022 |
General Plastic Surgery/
General Hospital |
6-479 |
Complete |
ISO |
11608-5:2022 |
Needle-based injection systems for medical use - Requirements and test methods - Part 5: Automated functions |
| 12/20/2021 |
General Plastic Surgery/
General Hospital |
6-465 |
Complete |
USP-NF |
M76090_03_01 |
Sodium Chloride Irrigation |
| 12/20/2021 |
General Plastic Surgery/
General Hospital |
6-472 |
Complete |
USP-NF |
M36660_04_01 |
Heparin Lock Flush Solution |
| 05/30/2022 |
General Plastic Surgery/
General Hospital |
6-480 |
Complete |
ISO |
11608-6:2022 |
Needle-based injection systems for medical use - Requirements and test methods - Part 6: On-body delivery |
| 12/20/2021 |
General Plastic Surgery/
General Hospital |
6-467 |
Complete |
USP-NF |
M80200_04_01 |
Nonabsorbable Surgical Suture |
![Sort by Date [Old to new]](/scripts/cdrh/images/arrow_up-black.GIF){kind=icon}
![Sort by Date [New to old]](/scripts/cdrh/images/arrow_down-black.GIF){kind=icon}
