|
Date of Entry
|
Specialty Task Group Area
|
Recognition Number
|
Extent of Recognition
|
Standards Developing Organization
|
Standard Designation Number and Date
|
Standard Title (click for recognition information)
|
06/07/2021 |
Orthopedic |
11-379 |
Complete |
ASTM |
F2978-20 |
Standards Guide to Optimize Scan Sequences for Clinical Diagnostic Evaluation of Metal-on-Metal Hip Arthroplasty Devices using Magnetic Resonance Imaging |
06/07/2021 |
Orthopedic |
11-380 |
Complete |
ASTM |
F2979-20 |
Standard Guide for Characterization of Wear from the Articulating Surfaces in Retrieved Metal-on-Metal and other Hard-on-Hard Hip Prostheses |
06/07/2021 |
Orthopedic |
11-381 |
Complete |
ASTM |
F2582-20 |
Standard Test Method for Dynamic Impingement Between Femoral and Acetabular Hip Components |
06/07/2021 |
Orthopedic |
11-382 |
Complete |
ASTM |
F3090-20 |
Standard Test Method for Fatigue Testing of Acetabular Devices for Total Hip Replacement |
06/07/2021 |
Orthopedic |
11-383 |
Complete |
ASTM |
F3143-20 |
Standard Test Method for Determination of Frictional Torque and Friction Factor for Hip Replacement Bearings under Standard Conditions Using a Reciprocal Friction Simulator |
06/07/2021 |
Orthopedic |
11-384 |
Complete |
ASTM |
F3446-20 |
Standard Test Method for Determination of Frictional Torque and Friction Factor for Hip Implants Using an Anatomical Motion Hip Simulator |
06/07/2021 |
Physical Medicine |
16-231 |
Complete |
ISO |
10328 Second edition 2016-06-01 |
Prosthetics - Structural testing of lower-limb prostheses - Requirements and test methods |
06/07/2021 |
Radiology |
12-335 |
Complete |
IEC |
60336 Edition 5.0 2020-12 |
Medical electrical equipment - X-ray tube assemblies for medical diagnosis - Focal spot dimensions and related characteristics |
06/07/2021 |
Radiology |
12-336 |
Complete |
IEC |
60601-1-3 Edition 2.2 2021-01 CONSOLIDATED VERSION |
Medical electrical equipment - Part 1-3: General requirements for basic safety and essential performance - Collateral Standard: Radiation protection in diagnostic X-ray equipment |
06/07/2021 |
Radiology |
12-337 |
Complete |
NEMA |
NU 1-2018 |
Performance Measurements of Gamma Cameras |
06/07/2021 |
Radiology |
12-338 |
Complete |
IEC |
60601-2-1 Edition 4.0 2020-10 |
Medical electrical equipment - Part 2-1: Particular requirements for the basic safety and essential performance of electron accelerators in the range 1 MeV to 50 MeV |
06/07/2021 |
Radiology |
12-339 |
Complete |
IEC |
60601-2-63 Edition 1.2 2021-05 CONSOLIDATED VERSION |
Medical electrical equipment - Part 2-63: Particular requirements for the basic safety and essential performance of dental extra-oral X-ray equipment |
06/07/2021 |
Radiology |
12-340 |
Complete |
IEC |
60601-2-65 Edition 1.2 2021-05 CONSOLIDATED VERSION |
Medical electrical equipment - Part 2-65: Particular requirements for the basic safety and essential performance of dental intra-oral-X-ray equipment |
06/07/2021 |
Software/ Informatics |
13-117 |
Partial |
IEEE |
Std 11073-40101-2020 |
Health informatics - Device interoperability Part 40101: Foundational - Cybersecurity - Processes for vulnerability assessment. |
06/07/2021 |
Software/ Informatics |
13-118 |
Complete |
IEEE |
Std 11073-40102:2020 |
Health informatics - Device interoperability. Part 40102: Foundational - Cybersecurity - Capabilities for mitigation. |
06/07/2021 |
Software/ Informatics |
13-119 |
Complete |
ANSI ISA |
62443-4-1-2018 |
Security for industrial automation and control systems Part 4-1: Product security development life-cycle requirements. |
06/07/2021 |
Sterility |
14-562 |
Complete |
ANSI AAMI |
ST79:2017 & 2020 Amendments A1, A2, A3, A4 |
(Consolidated Text) Comprehensive guide to steam sterilization and sterility assurance in health care facilities |
06/07/2021 |
Tissue Engineering |
15-66 |
Complete |
ASTM |
F2260-18 |
Standard Test Method for Determining Degree of Deacetylation in Chitosan Salts by Proton Nuclear Magnetic Resonance (1HNMR) Spectroscopy |
06/07/2021 |
Tissue Engineering |
15-67 |
Complete |
ASTM |
F2212-20 |
Standard Guide for Characterization of Type I Collagen as Starting Materials for Surgical Implants and Substrates for Tissue Engineered Medical Products (TEMPs) |
12/21/2020 |
Anesthesiology |
1-147 |
Complete |
ISO |
26825 Second edition 2020-10 |
Anaesthetic and respiratory equipment - User-applied labels for syringes containing drugs used during anaesthesia - Colours, design and performance |
12/21/2020 |
Anesthesiology |
1-148 |
Complete |
ISO |
80601-2-69 Second edition 2020-11 |
Medical electrical equipment - Part 2-69: Particular requirements for the basic safety and essential performance of oxygen concentrator equipment |
12/21/2020 |
Anesthesiology |
1-149 |
Complete |
ISO |
7376 Third edition 2020-08 |
Anaesthetic and respiratory equipment - Laryngoscopes for tracheal intubation |
12/21/2020 |
Anesthesiology |
1-150 |
Complete |
ISO |
8836 Fifth edition 2019-12 |
Suction catheters for use in the respiratory tract |
12/21/2020 |
Biocompatibility |
2-277 |
Complete |
ASTM |
F813-20 |
Standard Practice for Direct Contact Cell Culture Evaluation of Materials for Medical Devices |
12/21/2020 |
Biocompatibility |
2-278 |
Complete |
ASTM |
F719-20 e1 |
Standard Practice for Testing Materials in Rabbits for Primary Skin Irritation |
12/21/2020 |
Biocompatibility |
2-279 |
Complete |
ASTM |
F750-20 |
Standard Practice for Evaluating Acute Systemic Toxicity of Material Extracts by Systemic Injection in the Mouse |
12/21/2020 |
Biocompatibility |
2-280 |
Complete |
ASTM |
F1408-20a |
Standard Practice for Subcutaneous Screening Test for Implant Materials |
12/21/2020 |
Biocompatibility |
2-281 |
Complete |
ISO |
TS 10993-19 Second edition 2020-03 |
Biological evaluation of medical devices - Part 19: Physico-chemical, morphological and topographical characterization of materials |
12/21/2020 |
Biocompatibility |
2-282 |
Complete |
ISO |
14155 Third edition 2020-07 |
Clinical investigation of medical devices for human subjects - Good clinical practice |
12/21/2020 |
Biocompatibility |
2-283 |
Complete |
ASTM |
F619-20 |
Standard Practice for Extraction of Materials Used in Medical Devices |
12/21/2020 |
Biocompatibility |
2-288 |
Partial |
ISO |
10993-15 Second edition 2019-11 |
Biological evaluation of medical devices - Part 15: Identification and quantification of degradation products from metals and alloys |
12/21/2020 |
Cardiovascular |
3-169 |
Partial |
IEC |
60601-2-4 Edition 3.1 2018-02 CONSOLIDATED VERSION |
Medical electrical equipment - Part 2-4: Particular requirements for the basic safety and essential performance of cardiac defibrillators |
ANSI AAMI IEC |
60601-2-4:2010/A1:2018 (Consolidated Text) |
Medical electrical equipment Part 2-4: Particular requirements for the basic safety and essential performance of cardiac defibrillators, including Amendment 1 |
12/21/2020 |
Dental/ ENT |
4-264 |
Complete |
ISO |
9333 Second edition 2006-07 |
Dentistry - Brazing materials |
ANSI ADA |
Standard No. 88-2019 |
Dental Brazing Alloys |
12/21/2020 |
Dental/ ENT |
4-265 |
Complete |
ISO |
10271 Third edition 2020-08 |
Dentistry - Corrosion test methods for metallic materials |
ANSI ADA |
Standard No. 97-2020 |
Corrosion Test Methods for Metallic Materials |
12/21/2020 |
Dental/ ENT |
4-266 |
Complete |
ISO |
19023 First edition 2018-02 |
Dentistry - Orthodontic anchor screws |
ANSI ADA |
Standard No. 178-2019 |
Orthodontic Anchor Screws |
12/21/2020 |
Dental/ ENT |
4-267 |
Complete |
ISO |
21606 First edition 2007-06 |
Dentistry - Elastomeric auxiliaries for use in orthodontics |
ANSI ADA |
Standard No. 105-2010 (R2015) |
Orthodontic Elastomeric Materials |
12/21/2020 |
Dental/ ENT |
4-268 |
Complete |
ISO |
15841 Second edition 2014-08 |
Dentistry - Wires for use in orthodontics [Including AMENDMENT 1 (2020)] |
ANSI ADA |
Standard No. 32-2017 |
Orthodontic Wires |
12/21/2020 |
Dental/ ENT |
4-269 |
Complete |
ISO |
3964 Third edition 11-2016 |
Dentistry - Coupling dimensions for handpiece connectors [Including AMENDMENT 1 (2018)] |
ANSI ADA |
Standard No. 158-2020 |
Coupling Dimensions for Dental Handpiece Connectors |
12/21/2020 |
Dental/ ENT |
4-270 |
Complete |
ANSI ADA |
Technical Report No. 146-2018 |
CAD/CAM Abutments in Dentistry |
12/21/2020 |
Dental/ ENT |
4-271 |
Complete |
ANSI ADA |
Standard No. 34-2013 |
Dental Cartridge Syringes |
12/21/2020 |
Dental/ ENT |
4-272 |
Complete |
ANSI ADA |
Standard No. 63-2013 |
Root Canal Barbed Broaches and Rasps |
12/21/2020 |
General I (QS/ RM) |
5-131 |
Complete |
IEC |
60601-1-8 Edition 2.2 2020-07 CONSOLIDATED VERSION |
Medical electrical equipment - Part 1-8: General requirements for basic safety and essential performance - Collateral Standard: General requirements, tests and guidance for alarm systems in medical electrical equipment and medical electrical systems |
ANSI AAMI IEC |
60601-1-8:2006 and A1:2012 [Including AMD 2:2021] |
Medical Electrical Equipment - Part 1-8: General requirements for basic safety and essential performance - Collateral Standard: General requirements, tests and guidance for alarm systems in medical electrical equipment and medical electrical systems [Including Amendment 2 (2021)] |
12/21/2020 |
General I (QS/ RM) |
5-132 |
Complete |
IEC |
60601-1-6 Edition 3.2 2020-07 CONSOLIDATED VERSION |
Medical electrical equipment - Part 1-6: General requirements for basic safety and essential performance - Collateral standard: Usability |
12/21/2020 |
General I (QS/ RM) |
5-133 |
Complete |
ISO |
80369-7 Second edition 2021-05 |
Small-bore connectors for liquids and gases in healthcare applications - Part 7: Connectors for intravascular or hypodermic applications |
12/21/2020 |
General II (ES/ EMC) |
19-36 |
Partial |
IEC |
60601-1-2 Edition 4.1 2020-09 CONSOLIDATED VERSION |
Medical electrical equipment - Part 1-2: General requirements for basic safety and essential performance - Collateral Standard: Electromagnetic disturbances - Requirements and tests |
ANSI AAMI IEC |
60601-1-2:2014 [Including AMD 1:2021] |
Medical electrical equipment - Part 1-2: General requirements for basic safety and essential performance - Collateral Standard: Electromagnetic disturbances - Requirements and tests [Including Amendment 1 (2021)] |
12/21/2020 |
General II (ES/ EMC) |
19-37 |
Complete |
IEC |
60601-1-10 Edition 1.2 2020-07 CONSOLIDATED VERSION |
Medical electrical equipment - Part 1-10: General requirements for basic safety and essential performance - Collateral Standard: Requirements for the development of physiologic closed-loop controllers |
12/21/2020 |
General II (ES/ EMC) |
19-38 |
Partial |
IEC |
60601-1-11 Edition 2.1 2020-07 CONSOLIDATED VERSION |
Medical electrical equipment - Part 1-11: General requirements for basic safety and essential performance - Collateral Standard: Requirements for medical electrical equipment and medical electrical systems used in the home healthcare environment |
12/21/2020 |
General II (ES/ EMC) |
19-39 |
Complete |
IEC |
60601-1-12 Edition 1.1 2020-07 CONSOLIDATED VERSION |
Medical electrical equipment - Part 1-12: General requirements for basic safety and essential performance - Collateral Standard: Requirements for medical electrical equipment and medical electrical systems intended for use in the emergency medical services environment |
ANSI AAMI IEC |
60601-1-12:2016 [Including AMD 1:2021] |
Medical electrical equipment - Part 1-12: General requirements for basic safety and essential performance - Collateral Standard: Requirements for medical electrical equipment and medical electrical systems intended for use in the emergency [Including Amendment 1(2021)] |
12/21/2020 |
General Plastic Surgery/ General Hospital |
6-448 |
Partial |
ASTM |
F2407-20 |
Standard Specification for Surgical Gowns Intended for Use in Healthcare Facilities |
12/21/2020 |
General Plastic Surgery/ General Hospital |
6-449 |
Partial |
ASTM |
F1169-19 |
Standard Consumer Safety Specification for Full-Size Baby Cribs |
12/21/2020 |
General Plastic Surgery/ General Hospital |
6-450 |
Complete |
IEC |
60601-2-50 Edition 3.0 2020-09 |
Medical electrical equipment - Part 2-50: Particular requirements for the basic safety and essential performance of infant phototherapy equipment |
12/21/2020 |
InVitro Diagnostics |
7-299 |
Complete |
CLSI |
POCT14 2nd Edition |
Point-of-Care Coagulation Testing and Anticoagulation Monitoring |
12/21/2020 |
InVitro Diagnostics |
7-300 |
Complete |
CLSI |
MM13 2nd Edition |
Collection, Transport, Preparation, and Storage of Specimens for Molecular Methods |
12/21/2020 |
InVitro Diagnostics |
7-301 |
Complete |
CLSI |
GP42 7th Edition |
Collection of Capillary Blood Specimens |
12/21/2020 |
InVitro Diagnostics |
7-302 |
Complete |
CLSI |
C34 4th Edition |
Sweat Testing: Specimen Collection and Quantitative Chloride Analysis |
12/21/2020 |
InVitro Diagnostics |
7-304 |
Complete |
CLSI |
M23 5th Edition |
Development of In Vitro Susceptibility Testing Criteria and Quality Control Parameters |
12/21/2020 |
InVitro Diagnostics |
7-305 |
Complete |
ISO |
17511 Second edition 2020-04 |
In vitro diagnostic medical devices - Requirements for establishing metrological traceability of values assigned to calibrators, trueness control materials and human samples |
12/21/2020 |
Materials |
8-537 |
Complete |
ASTM |
F620-20 |
Standard Specification for Titanium Alloy Forgings for Surgical Implants in the Alpha Plus Beta Condition |
12/21/2020 |
Materials |
8-538 |
Complete |
ASTM |
F2759-19 |
Standard Guide for Assessment of the Ultra High Molecular Weight Polyethylene (UHMWPE) Used in Orthopedic and Spinal Devices |
12/21/2020 |
Materials |
8-539 |
Complete |
ASTM |
F139-19 |
Standard Specification for Wrought 18 Chromium-14 Nickel-2.5 Molybdenum Stainless Steel Sheet and Strip for Surgical Implants (UNS S31673) |
12/21/2020 |
Materials |
8-540 |
Complete |
ASTM |
F1091-20 |
Standard Specification for Wrought Cobalt-20Chromium-15Tungsten-10Nickel Alloy Surgical Fixation Wire (UNS R30605) |
12/21/2020 |
Materials |
8-541 |
Complete |
ASTM |
F1537-20 |
Standard Specification for Wrought Cobalt-28Chromium-6Molybdenum Alloys for Surgical Implants (UNS R31537, UNS R31538, and UNS R31539) |
12/21/2020 |
Materials |
8-542 |
Complete |
ASTM |
F138-19 |
Standard Specification for Wrought 18Chromium-14Nickel-2.5Molybdenum Stainless Steel Bar and Wire for Surgical Implants (UNS S31673) |
12/21/2020 |
Materials |
8-543 |
Partial |
ASTM |
F755-19 |
Standard Specification for Selection of Porous Polyethylene for Use in Surgical Implants |
12/21/2020 |
Materials |
8-544 |
Complete |
ASTM |
F961-20 |
Standard Specification for 35Cobalt-35Nickel-20Chromium-10Molybdenum Alloy Forgings for Surgical Implants (UNS R30035) |
12/21/2020 |
Materials |
8-545 |
Complete |
ASTM |
F2977-20 |
Standard Test Method for Small Punch Testing of Polymeric Biomaterials Used in Surgical Implants |
12/21/2020 |
Materials |
8-546 |
Complete |
ASTM |
F3044-20 |
Standard Test Method for Evaluating the Potential for Galvanic Corrosion for Medical Implants |
12/21/2020 |
Materials |
8-547 |
Complete |
ASTM |
F629-20 |
Standard Practice for Radiography of Cast Metallic Surgical Implants |
12/21/2020 |
Materials |
8-548 |
Complete |
ISO ASTM |
52915 Third edition 2020-03 |
Specification for additive manufacturing file format (AMF) Version 1.2 |
12/21/2020 |
Materials |
8-549 |
Complete |
ASTM |
F3208-20 |
Standard Guide for Selecting Test Soils for Validation of Cleaning Methods for Reusable Medical Devices |
12/21/2020 |
Materials |
8-550 |
Complete |
ASTM |
F2181-20 |
Standard Specification for Wrought Seamless Stainless Steel Tubing for Surgical Implants |
12/21/2020 |
Materials |
8-551 |
Complete |
ASTM |
F2895-20 |
Standard Practice for Digital Radiography of Cast Metallic Implants |
12/21/2020 |
Materials |
8-552 |
Complete |
ASTM |
F3434-20 |
Guide for Additive manufacturing - Installation/Operation and Performance Qualification (IQ/OQ/PQ) of Laser-Beam Powder Bed Fusion Equipment for Production Manufacturing |
12/21/2020 |
Materials |
8-553 |
Complete |
ISO ASTM |
52903-1 First edition 2020-04 |
Additive manufacturing - Material extrusion-based additive manufacturing of plastic materials - Part 1: Feedstock materials |
12/21/2020 |
Materials |
8-554 |
Complete |
ISO ASTM |
TR 52912 First edition 2020-09 |
Additive manufacturing - Design - Functionally graded additive manufacturing |
12/21/2020 |
Nanotechnology |
18-17 |
Complete |
ISO |
21363 First edition 2020-06 |
Nanotechnologies - Measurements of particle size and shape distributions by transmission electron microscopy |
12/21/2020 |
Nanotechnology |
18-18 |
Complete |
ASTM |
E3247-20 |
Standard Test Method for Measuring the Size of Nanoparticles in Aqueous Media Using Dynamic Light Scattering |
12/21/2020 |
Neurology |
17-17 |
Complete |
ASTM |
F3395/F3395M-19 |
Standard Specification for Neurosurgical Head Holder Devices |
12/21/2020 |
ObGyn/ Gastroenterology/ Urology |
9-130 |
Complete |
ISO |
8600-6 Second edition 2020-09 |
Endoscopes - Medical endoscopes and endotherapy devices - Part 6: Vocabulary |
12/21/2020 |
Ophthalmic |
10-119 |
Complete |
ISO |
11979-5 Third edition 2020-09 |
Ophthalmic implants - Intraocular Lenses - Part 5: Biocompatibility |
12/21/2020 |
Ophthalmic |
10-120 |
Complete |
ISO |
TR 22979 Second Edition 2017-05 |
Ophthalmic implants - Intraocular Lenses - Guidance on assessment of the need for clinical investigation of intraocular lens design modifications |
12/21/2020 |
Ophthalmic |
10-121 |
Complete |
ISO |
16672 Third edition 2020-06 |
Ophthalmic implants - Ocular endotamponades |
12/21/2020 |
Orthopedic |
11-330 |
Partial |
ASTM |
F2028-17 |
Standard Test Methods for Dynamic Evaluation of Glenoid Loosening or Disassociation |
12/21/2020 |
Orthopedic |
11-370 |
Complete |
ISO |
14879-1 Second edition 2020-07 |
Implants for surgery - Total knee-joint prostheses - Part 1: Determination of endurance properties of knee tibial trays |
12/21/2020 |
Orthopedic |
11-371 |
Complete |
ASTM |
F2009-20 |
Standard Test Method for Determining the Axial Disassembly Force of Taper Connections of Modular Prostheses |
12/21/2020 |
Orthopedic |
11-372 |
Complete |
ASTM |
F2996-20 |
Standard Practice for Finite Element Analysis (FEA) of Non-Modular Metallic Orthopaedic Hip Femoral Stems |
12/21/2020 |
Orthopedic |
11-373 |
Complete |
ASTM |
F1223-20 |
Standard Test Method for Determination of Total Knee Replacement Constraint |
12/21/2020 |
Orthopedic |
11-374 |
Complete |
ISO |
7207-2 Second edition 2011-07-01 |
Implants for surgery - Components for partial and total knee joint prostheses - Part 2: Articulating surfaces made of metal, ceramic and plastics materials [Including AMENDMENT 1 (2016) and AMENDMENT 2 (2020)] |
12/21/2020 |
Orthopedic |
11-375 |
Complete |
ASTM |
F2193-20 |
Standard Specifications and Test Methods for Components Used in the Surgical Fixation of the Spinal Skeletal System |
12/21/2020 |
Physical Medicine |
16-230 |
Complete |
RESNA ANSI |
WC-2:2019 Section 25 |
American National Standard for Wheelchairs - Volume 2: Additional Requirements for Wheelchairs (including Scooters) with Electrical Systems Section 25: Batteries and Chargers for Powered Wheelchairs |
12/21/2020 |
Sterility |
14-550 |
Complete |
ANSI AAMI |
ST67:2019 |
Sterilization of health care products - Requirements and guidance for selecting a sterility assurance level (SAL) for products labeled "sterile" |
12/21/2020 |
Sterility |
14-551 |
Complete |
ISO |
14160 Third edition 2020-09 |
Sterilization of health care products - Liquid chemical sterilizing agents for single-use medical devices utilizing animal tissues and their derivatives - Requirements for characterization, development, validation and routine control of a sterilization process for medical devices |
12/21/2020 |
Sterility |
14-552 |
Complete |
ISO ASTM |
51818 Fourth edition 2020-06 |
Practice for dosimetry in an electron beam facility for radiation processing at energies between 80 and 300 keV |
12/21/2020 |
Sterility |
14-553 |
Complete |
ASTM |
F2097-20 |
Standard Guide for Design and Evaluation of Primary Flexible Packaging for Medical Products |
12/21/2020 |
Sterility |
14-554 |
Complete |
ASTM |
F17-20 |
Standard Terminology Relating to Flexible Barrier Packaging |
12/21/2020 |
Tissue Engineering |
15-64 |
Partial |
ISO |
22442-1 Third edition 2020-09 |
Medical devices utilizing animal tissues and their derivatives - Part 1: Application of risk management |
12/21/2020 |
Tissue Engineering |
15-65 |
Complete |
ISO |
22442-2 Third edition 2020-09 |
Medical devices utilizing animal tissues and their derivatives - Part 2: Controls on sourcing, collection and handling |
10/19/2020 |
Software/ Informatics |
13-116 |
Complete |
FIRST |
CVSS v3.0 |
Common Vulnerability Scoring System version 3.0 |
07/06/2020 |
Anesthesiology |
1-146 |
Complete |
ISO |
80601-2-12 Second edition 2020-02 |
Medical electrical equipment - Part 2-12: Particular requirements for basic safety and essential performance of critical care ventilators |
07/06/2020 |
Biocompatibility |
2-273 |
Complete |
ISO |
10993-9 Third edition 2019-11 |
Biological evaluation of medical devices - Part 9: Framework for identification and quantification of potential degradation products |