|
Date of Entry
|
Specialty Task Group Area
|
Recognition Number
|
Extent of Recognition
|
Standards Developing Organization
|
Standard Designation Number and Date
|
Standard Title (click for recognition information)
|
01/27/2015 |
Orthopedic |
11-283 |
Complete |
ASTM |
F2943-14 (Reapproved 2019) |
Standard Guide for Presentation of End User Labeling Information for Orthopedic Implants Used in Joint Arthroplasty |
05/29/2023 |
Dental/ ENT |
4-301 |
Complete |
ISO |
21563 Second edition 2021-08 |
Dentistry - Hydrocolloid impression materials |
ANSI ADA |
Standard No. 128-2022 |
Hydrocolloid Impression Materials |
06/07/2018 |
Dental/ ENT |
4-240 |
Complete |
ISO |
21563 First edition 2013-08-15 |
Dentistry - Hydrocolloid impression materials |
ANSI ADA |
Standard No. 128-2015 |
Hydrocolloid Impression Materials |
01/30/2014 |
Materials |
8-358 |
Complete |
ASTM |
F1855-00 (Reapproved 2019) |
Standard Specification for Polyoxymethylene (Acetal) for Medical Applications |
12/21/2020 |
ObGyn/ Gastroenterology/ Urology |
9-130 |
Complete |
ISO |
8600-6 Second edition 2020-09 |
Endoscopes - Medical endoscopes and endotherapy devices - Part 6: Vocabulary |
08/06/2013 |
Materials |
8-158 |
Complete |
ASTM |
F1713-08 (Reapproved 2013) |
Standard Specification for Wrought Titanium-13 Niobium-13 Zirconium Alloy for Surgical Implant Applications (UNS R58130) |
04/04/2016 |
Physical Medicine |
16-195 |
Complete |
ISO |
7176-1 Third edition 2014-10-01 |
Wheelchairs - Part 1: Determination of static stability |
04/04/2016 |
Radiology |
12-188 |
Complete |
NEMA |
MS-1-2008 (R2020) |
Determination of Signal-to-Noise Ratio (SNR) in Diagnostic Magnetic Resonance Imaging |
04/04/2016 |
Radiology |
12-187 |
Complete |
NEMA |
MS 3-2008 (R2020) |
Determination of Image Uniformity in Diagnostic Magnetic Resonance Images |
05/29/2023 |
Dental/ ENT |
4-302 |
Complete |
ISO |
10477 Fourth edition 2020-10 |
Dentistry - Polymer-based crown and veneering materials |
ANSI ADA |
Standard No. 53-2022 |
Polymer-Based Crown and Veneering Materials |
01/14/2019 |
ObGyn/ Gastroenterology/ Urology |
9-122 |
Complete |
ISO |
25841 Third edition 2017-08 |
Female condoms -- Requirements and test methods |
12/21/2020 |
Sterility |
14-553 |
Complete |
ASTM |
F2097-20 |
Standard Guide for Design and Evaluation of Primary Flexible Packaging for Medical Products |
12/23/2019 |
Cardiovascular |
3-161 |
Complete |
ISO |
14117 Second edition 2019-09 |
Active implantable medical devices - Electromagnetic compatibility - EMC test protocols for implantable cardiac pacemakers, implantable cardioverter defibrillators and cardiac resynchronization devices. |
07/15/2019 |
General Plastic Surgery/ General Hospital |
6-423 |
Complete |
IEC |
60601-2-6 Edition 2.1 2016-04 |
CONSOLIDATED VERSION Medical electrical equipment - Part 2-6: Particular requirements for the basic safety and essential performance of microwave therapy equipment |
06/07/2018 |
Tissue Engineering |
15-53 |
Complete |
ASTM |
F3206-17 |
Standard Guide for Assessing Medical Device Cytocompatibility with Delivered Cellular Therapies |
06/07/2018 |
Cardiovascular |
3-150 |
Complete |
ISO |
7199 Third edition 2016-11-15 |
Cardiovascular implants and artificial organs - Blood-gas exchangers (oxygenators). |
ANSI AAMI ISO |
7199:2016 |
Cardiovascular implants and artificial organs - Blood-gas exchangers (oxygenators). |
06/07/2018 |
Materials |
8-463 |
Complete |
ISO ASTM |
52901 First edition 2017-08 |
Standard Guide for Additive Manufacturing - General Principles - Requirements for Purchased AM Parts |
06/07/2018 |
Sterility |
14-510 |
Complete |
ISO |
11137-3 Second edition 2017-06 |
Sterilization of health care products - Radiation - Part 3: Guidance on dosimetric aspects of development, validation and routine control |
ANSI AAMI ISO |
11137-3:2017/(R)2023 |
Sterilization of health care products - Radiation - Part 3: Guidance on dosimetric aspects of development, validation and routine control |
05/30/2022 |
Materials |
8-588 |
Complete |
ASTM |
F560-22 |
Standard Specification for Unalloyed Tantalum for Surgical Implant Applications (UNS R05200, UNS R05400) |
05/30/2022 |
Materials |
8-583 |
Complete |
ASTM |
F562-22 |
Standard Specification for Wrought 35Cobalt-35Nickel-20Chromium-10Molybdenum Alloy for Surgical Implant Applications (UNS R30035) |
08/21/2017 |
Biocompatibility |
2-248 |
Complete |
ISO |
10993-4 Third edition 2017-04 |
Biological evaluation of medical devices--Part 4: Selection of tests for interactions with blood |
ANSI AAMI ISO |
10993-4: 2017 |
Biological evaluation of medical devices--Part 4: Selection of tests for interactions with blood |
06/07/2018 |
Biocompatibility |
2-249 |
Complete |
ISO |
10993-16 Third edition 2017-05 |
Biological evaluation of medical devices - Part 16: Toxicokinetic study design for degradation products and leachables |
12/20/2021 |
Materials |
8-566 |
Complete |
ASTM |
F1813-21 |
Standard Specification for Wrought Titanium - 12 Molybdenum - 6 Zirconium - 2 Iron Alloy for Surgical Implant (UNS R58120) |
09/09/2008 |
Sterility |
14-239 |
Complete |
ISO |
13408-3 First edition 2006-09-15 |
Aseptic processing of health care products - Part 3: Lyophilization |
ANSI AAMI ISO |
13408-3:2006/(R)2015 |
Aseptic processing of health care products - Part 3: Lyophilization |
07/15/2019 |
Materials |
8-496 |
Complete |
ISO |
5834-4 Second edition 2019-02 |
Implants for surgery - Ultra-high-molecular-weight polyethylene - Part 4: Oxidation index measurement method |
07/15/2019 |
Materials |
8-497 |
Complete |
ISO |
5834-5 Second edition 2019-02 |
Implants for surgery - Ultra-high-molecular-weight polyethylene - Part 5: Morphology assessment method |
12/21/2020 |
Materials |
8-538 |
Complete |
ASTM |
F2759-19 |
Standard Guide for Assessment of the Ultra High Molecular Weight Polyethylene (UHMWPE) Used in Orthopedic and Spinal Devices |
12/21/2020 |
Materials |
8-539 |
Complete |
ASTM |
F139-19 |
Standard Specification for Wrought 18 Chromium-14 Nickel-2.5 Molybdenum Stainless Steel Sheet and Strip for Surgical Implants (UNS S31673) |
08/14/2015 |
Dental/ ENT |
4-220 |
Complete |
ANSI ASA |
S3.22-2014 (Reaffirmed 2020) |
American National Standard Specification of Hearing Aid Characteristics |
06/07/2018 |
Tissue Engineering |
15-54 |
Complete |
ASTM |
F3207-17 |
Standard Guide for in vivo Evaluation of Rabbit Lumbar Intertransverse Process Spinal Fusion Model |
06/07/2018 |
Biocompatibility |
2-250 |
Complete |
ASTM |
F756-17 |
Standard Practice for Assessment of Hemolytic Properties of Materials |
06/27/2016 |
Radiology |
12-293 |
Complete |
IEC |
60601-2-37 Edition 2.1 2015 |
Medical electrical equipment - Part 2-37: Particular requirements for the basic safety and essential performance of ultrasonic medical diagnostic and monitoring equipment |
09/09/2008 |
Software/ Informatics |
13-14 |
Complete |
CLSI |
POCT1-A2 |
Point-of-Care Connectivity |
09/09/2008 |
Software/ Informatics |
13-17 |
Complete |
CLSI |
LIS02-A2 |
Standard Specification for Transferring Information Between Clinical Instruments and Computer Systems; Approved Standard-Second Edition |
09/09/2008 |
Software/ Informatics |
13-19 |
Complete |
CLSI |
LIS04-A |
Standard Guide for Documentation of Clinical Laboratory Computer Systems |
09/09/2008 |
Software/ Informatics |
13-20 |
Complete |
CLSI |
LIS05-A |
Standand Specification for Transferring Clinical Observations Between Independent Computer Systems |
08/14/2015 |
Dental/ ENT |
4-184 |
Complete |
ANSI ASA |
S3.25-2009 (Reaffirmed 2019) |
American National Standard For an Occluded Ear Simulator |
09/09/2008 |
Dental/ ENT |
4-145 |
Complete |
ISO |
22803 First edition 2004-09-01 |
Dentistry - Membrane materials for guided tissue regeneration in oral and maxillofacial surgery - Contents of a technical file |
08/14/2015 |
Ophthalmic |
10-98 |
Complete |
ISO |
11979-2 Second edition 2014-08-15 |
Ophthalmic implants - Intraocular lenses - Part 2: Optical properties and test methods |
08/14/2015 |
Ophthalmic |
10-97 |
Complete |
ISO |
13212 Third edition 2014-09-01 |
Ophthalmic optics - Contact lens care products - Guidelines for determination of shelf-life |
01/30/2014 |
Sterility |
14-412 |
Complete |
AOAC |
6.2.01:2013 |
Official Method 955.14, Testing Disinfectants Against Salmonella choleraesuis, Use-Dilution Method |
08/21/2017 |
General Plastic Surgery/ General Hospital |
6-384 |
Complete |
ISO |
1135-4 Sixth edition 2015-12-01 |
Transfusion equipment for medical use-Part 4: Transfusion sets for single use, gravity feed |
09/09/2008 |
Software/ Informatics |
13-21 |
Complete |
CLSI |
LIS06-A |
Standard Practice for Reporting Reliability of Clinical Laboratory Information Systems |
09/09/2008 |
Software/ Informatics |
13-22 |
Complete |
CLSI |
LIS07-A |
Standard Specification for Use of Bar Codes on Specimen Tubes in the Clinical Laboratory |
09/09/2008 |
Software/ Informatics |
13-23 |
Complete |
CLSI |
LIS08-A |
Standard Guide for Functional Requirements of Clinical Laboratory Information Management Systems |
09/09/2008 |
Software/ Informatics |
13-24 |
Complete |
CLSI |
LIS09-A |
Standard Guide for Coordination of Clinical Laboratory Services within the Electronic Health Record Environment and Networked Architectures |
01/30/2014 |
Sterility |
14-400 |
Complete |
ASTM |
F2203-13 (Reapproved 2022) |
Standard Test Method for Linear Measurement Using Precision Steel Rule |
01/27/2015 |
Software/ Informatics |
13-70 |
Complete |
ANSI AAMI IEC |
TIR80001-2-5:2014 |
Application of risk management for IT-networks incorporating medical devices - Part 2-5: Application guidance - Guidance on distributed alarm systems |
IEC |
TR 80001-2-5 Edition 1.0 2014-12 |
Application of risk management for IT-networks incorporating medical devices - Part 2-5: Application guidance - Guidance on distributed alarm systems |
08/14/2015 |
General Plastic Surgery/ General Hospital |
6-353 |
Complete |
ASTM |
F2051-00 (Reapproved 2014) |
Standard Specification for Implantable Saline Filled Breast Prosthesis |
06/07/2021 |
Radiology |
12-337 |
Complete |
NEMA |
NU 1-2018 |
Performance Measurements of Gamma Cameras |
06/07/2018 |
Neurology |
17-15 |
Complete |
ISO |
14708-3 Second edition 2017-04 |
Implants for surgery - Active implantable medical devices - Part 3: Implantable neurostimulators |
06/07/2018 |
Neurology |
17-16 |
Complete |
IEC |
60601-2-10 Edition 2.1 2016-04 |
Medical electrical equipment - Part 2-10: Particular requirements for the basic safety and essential performance of nerve and muscle stimulators |
06/07/2018 |
General Plastic Surgery/ General Hospital |
6-401 |
Complete |
ASTM |
D7160-16 |
Standard Practice for Determination of Expiration Dating for Medical Gloves |
08/14/2015 |
InVitro Diagnostics |
7-257 |
Complete |
CLSI |
M56-A |
Principles and procedures for Detection of Anaerobes in Clinical Specimens; Approved Guideline |
01/30/2014 |
Physical Medicine |
16-164 |
Complete |
ISO |
7176-10 Second edition 2008-11-01 |
Wheelchairs - Part 10: Determination of obstacle-climbing ability of electrically powered wheelchairs |
09/17/2018 |
Ophthalmic |
10-84 |
Complete |
ANSI |
Z80.11-2012 (R2022) |
American National Standard for Ophthalmics - Laser Systems for Corneal Reshaping |
09/17/2018 |
Ophthalmic |
10-113 |
Complete |
ANSI |
Z80.30-2018 (R2023) |
American National Standard for Ophthalmics - Toric Intraocular Lenses |
03/16/2012 |
General Plastic Surgery/ General Hospital |
6-177 |
Complete |
ASTM |
E1112-00(2018) |
Standard Specification for Electronic Thermometer for Intermittent Determination of Patient Temperature |
03/16/2012 |
InVitro Diagnostics |
7-165 |
Complete |
CLSI |
H20-A2 (Replaces H20-A) |
Reference Leukocyte (WBC) Differential Count (Proportional) and Evaluation of Instrumental Methods; Approved Standard - Second Edition |
03/16/2012 |
InVitro Diagnostics |
7-166 |
Complete |
CLSI |
GP20-A2 (Replaces GP20-A) |
Fine Needle Aspiration Biopsy (FNAB) Techniques; Approved Guideline - Second Edition |
06/07/2018 |
General Plastic Surgery/ General Hospital |
6-270 |
Complete |
ASTM |
F1840-10 (Reapproved 2016) |
Standard Terminology for Surgical Suture Needles |
08/21/2017 |
General Plastic Surgery/ General Hospital |
6-125 |
Complete |
ASTM |
E1965-98 (Reapproved 2016) |
Standard Specification for Infrared Thermometers for Intermittent Determination of Patient Temperature |
08/21/2017 |
General Plastic Surgery/ General Hospital |
6-400 |
Complete |
ASTM |
F3212-16(2023) |
Standard Test Method for Coring Testing of Huber Needles |
12/04/2017 |
Software/ Informatics |
13-98 |
Complete |
ISO IEC |
646 Third edition 1991-12-15 (R2018) |
Information technology - ISO 7-bit coded character set for information interchange |
INCITS ISO IEC |
646:1991 (R2018) |
Information technology - ISO 7-bit coded character set for information interchange |
08/21/2017 |
Ophthalmic |
10-103 |
Complete |
ANSI |
Z80.18-2016 (R2021) |
American National Standard for Ophthalmics - Contact Lens Care Products - Vocabulary, Performance Specifications, and Test Methodology |
03/16/2012 |
InVitro Diagnostics |
7-225 |
Complete |
CLSI |
GP34-A (Replaces GP34-P) |
Validation and Verfication of Tubes for Venous and Capillary Blood Specimen Collection; Approved Guidance |
08/02/2011 |
InVitro Diagnostics |
7-219 |
Complete |
CLSI |
I/LA28-A2 |
Quality Assurance for Design Control and Implementation of Immunohistochemistry Assays; Approved Guidelines-Second Edition. |
08/02/2011 |
Ophthalmic |
10-65 |
Complete |
ISO |
15752 Second edition 2010-01-15 |
Ophthalmic instruments - Endoilluminators - Fundamental requirements and test methods for optical radiation safety |
06/27/2016 |
Radiology |
12-301 |
Complete |
IEC |
60601-2-8 Edition 2.1 b:2015 |
Medical electrical equipment - Part 2-8: Particular requirements for the safety of therapeutic X-ray equipment operating in the range 10 kV to 1 MV |
01/30/2014 |
Sterility |
14-402 |
Complete |
ASTM |
F1140/F1140M-13 (Reapproved 2020)e1 |
Standard Test Methods for Internal Pressurization Failure Resistance of Unrestrained Packages |
01/30/2014 |
Sterility |
14-404 |
Complete |
ASTM |
F2250-13 (Reapproved 2018) |
Standard Practice for Evaluation of Chemical Resistance of Printed Inks and Coatings on Flexible Packaging Materials |
01/30/2014 |
Sterility |
14-405 |
Complete |
ASTM |
F2252/F2252M-13 (Reapproved 2018) |
Standard Practice for Evaluating Ink or Coating Adhesion to Flexible Packaging Materials Using Tape |
08/21/2017 |
Software/ Informatics |
13-95 |
Complete |
ISO IEEE |
11073-10425 First edition 2016-06-15 |
Health informatics - Personal health device communication - Part 10425: Device specialization - Continuous glucose monitor (CGM) |
08/06/2013 |
Software/ Informatics |
13-38 |
Complete |
IEC |
80001-1 Edition 1.0 2010-10 |
Application of risk management for IT-networks incorporating medical devices - Part 1: Roles, responsibilities and activities |
ANSI AAMI IEC |
80001-1:2010 |
Application of risk management for IT Networks incorporating medical devices - Part 1: Roles, responsibilities and activities |
01/30/2014 |
Software/ Informatics |
13-63 |
Complete |
ANSI AAMI IEC |
TIR 80001-2-4:2012 |
Application of risk management for IT-networks incorporating medical devices - Part 2-4: General implementation guidance for healthcare delivery organizations |
IEC |
TR 80001-2-4 Edition 1.0 2012-11 |
Application of risk management for IT-networks incorporating medical devices -- Part 2-4: Application guidance - General implementation guidance for healthcare delivery organization |
06/07/2021 |
Radiology |
12-338 |
Complete |
IEC |
60601-2-1 Edition 4.0 2020-10 |
Medical electrical equipment - Part 2-1: Particular requirements for the basic safety and essential performance of electron accelerators in the range 1 MeV to 50 MeV |
01/30/2014 |
Sterility |
14-406 |
Complete |
ANSI AAMI |
ST8:2013/(R)2018 |
Hospital steam sterilizers |
08/14/2015 |
Ophthalmic |
10-99 |
Complete |
ISO |
4311 First edition 1979-06-01 |
Anionic and non-ionic surface active agents - Determination of critical micellization concentration - Method by measuring surface tension with a plate, stirrup, or ring |
12/20/2021 |
Materials |
8-567 |
Complete |
ASTM |
F86-21 |
Standard Practice for Surface Preparation and Marking of Metallic Surgical Implants |
12/20/2021 |
Materials |
8-568 |
Complete |
ASTM |
F1586-21 |
Standard Specification for Wrought Nitrogen Strengthened 21 Chromium-10 Nickel-3 Manganese-2.5 Molybdenum Stainless Steel Bar for Surgical Implants (UNS S31675) |
12/19/2022 |
Anesthesiology |
1-153 |
Complete |
NFPA |
99:2021 |
Health Care Facilities Code |
12/19/2022 |
Anesthesiology |
1-154 |
Complete |
ASME |
PVHO-1-2019 |
Safety Standard for Pressure Vessels for Human Occupancy |
12/21/2020 |
Materials |
8-544 |
Complete |
ASTM |
F961-20 |
Standard Specification for 35Cobalt-35Nickel-20Chromium-10Molybdenum Alloy Forgings for Surgical Implants (UNS R30035) |
12/21/2020 |
Ophthalmic |
10-120 |
Complete |
ISO |
TR 22979 Second Edition 2017-05 |
Ophthalmic implants - Intraocular Lenses - Guidance on assessment of the need for clinical investigation of intraocular lens design modifications |
06/07/2021 |
ObGyn/ Gastroenterology/ Urology |
9-132 |
Complete |
ASTM |
F623-19 |
Standard Performance Specification for Foley Catheter |
12/20/2021 |
Materials |
8-569 |
Complete |
ASTM |
F648-21 |
Standard Specification for Ultra-High-Molecular-Weight Polyethylene Powder and Fabricated Form for Surgical Implants |
01/14/2019 |
General I (QS/ RM) |
5-120 |
Complete |
IEC |
60812 Edition 3.0 2018-08 |
Analysis techniques for system reliability - Procedure for failure mode and effects analysis (FMEA) |
08/21/2017 |
Software/ Informatics |
13-91 |
Complete |
ISO IEEE |
11073-10419 First edition 2016-06-15 |
Health informatics - Personal health device communication - Part 10419: Device specialization - Insulin pump |
03/16/2012 |
Radiology |
12-177 |
Complete |
UL |
122-2007 (R2011) |
Standard for Photographic Equipment - Ed. 5.0 |
12/20/2021 |
General Plastic Surgery/ General Hospital |
6-471 |
Complete |
USP-NF |
M88880_05_01 |
Sterile Water for Irrigation |
05/29/2023 |
Sterility |
14-586 |
Complete |
ISO |
22441 First edition 2022-08 |
Sterilization of health care products - Low temperature vaporized hydrogen peroxide - Requirements for the development, validation and routine control of a sterilization process for medical devices |
07/15/2019 |
Anesthesiology |
1-116 |
Complete |
ISO |
5360 Fourth edition 2016-02-15 |
Anaesthetic vaporizers - Agent specific filling systems |
07/15/2019 |
Anesthesiology |
1-122 |
Complete |
ISO |
5364 Fifth edition 2016-09-01 |
Anaesthetic and respiratory equipment-Oropharyngeal airways |
12/23/2016 |
Materials |
8-440 |
Complete |
ASTM |
F3091/F3091M-14 |
Standard Specification for Powder Bed Fusion of Plastic Materials |
08/21/2017 |
Materials |
8-226 |
Complete |
ASTM |
F603-12 (Reapproved 2020) |
Standard Specification for High-Purity Dense Aluminum Oxide for Medical Application |
12/04/2017 |
Radiology |
12-307 |
Complete |
AAMI |
RT2:2017 |
Radiation therapy readiness check |
08/21/2017 |
Materials |
8-459 |
Complete |
SAE |
AMS2750 Rev. E 2012-07 |
Pyrometry |
08/21/2017 |
Biocompatibility |
2-155 |
Complete |
ASTM |
F2147-01 (Reapproved 2016) |
Standard Practice for Guinea Pig: Split Adjuvant and Closed Patch Testing for Contact Allergens |
08/21/2017 |
General Plastic Surgery/ General Hospital |
6-70 |
Complete |
ASTM |
E825-98 (Reapproved 2016) |
Standard Specification for Phase Change-Type Disposable Fever Thermometer for Intermittent Determination of Human Temperature |
08/21/2017 |
General Plastic Surgery/ General Hospital |
6-124 |
Complete |
ASTM |
E1104-98 (Reapproved 2016) |
Standard Specification for Clinical Thermometer Probe Covers and Sheaths |