|
|
|
Date of
Entry
|
Specialty Task
Group Area
|
Recognition
Number
|
Extent of
Recognition
|
Standards
Developing
Organization
|
Standard Designation
Number and Date
|
Standard Title
(click for recognition information)
|
| 12/18/2023 |
Orthopedic |
11-407 |
Complete |
ASTM |
F3140-23 |
Standard Test Method for Cyclic Fatigue Testing of Metal Tibial Tray Components of Unicondylar Knee Joint Replacements |
| 03/31/2006 |
Radiology |
12-137 |
Complete |
ISO |
4090 Third eidition 2001-08-15 |
Photography - Medical radiographic cassette/screens/films and hard-copy imaging films - Dimensions and specifications |
| 10/04/2010 |
InVitro Diagnostics |
7-212 |
Complete |
CLSI |
EP18-A2 |
Risk Management Techniques to Identify and Control Laboratory Error Sources; Approved Guideline - Second Edition |
| 08/02/2011 |
InVitro Diagnostics |
7-219 |
Complete |
CLSI |
I/LA28-A2 |
Quality Assurance for Design Control and Implementation of Immunohistochemistry Assays; Approved Guidelines-Second Edition. |
| 08/21/2017 |
Tissue Engineering |
15-49 |
Complete |
ASTM |
F2027-16 |
Standard Guide for Characterization and Testing of Raw or Starting Materials for Tissue-Engineered Medical Products |
| 12/23/2016 |
Cardiovascular |
3-144 |
Complete |
ISO |
7198 Second edition 2016-08-01 |
Cardiovascular implants and extracorporeal systems - Vascular prostheses - Tubular vascular grafts and vascular patches |
| ANSI AAMI ISO |
7198:2016 |
Cardiovascular implants and extracorporeal systems - Vascular prostheses - Tubular vascular grafts and vascular patches |
| 12/18/2023 |
Anesthesiology |
1-163 |
Complete |
ISO |
80601-2-72 Second edition 2023-06 |
Medical electrical equipment - Part 2-72: Particular requirements for basic safety and essential performance of home healthcare environment ventilators for ventilator-dependent patients |
| 09/11/2023 |
Orthopedic |
11-401 |
Complete |
ISO |
21535 Third edition 2023-07 |
Non-active surgical implants - Joint replacement implants - Specific requirements for hip-joint replacement implants |
| 01/27/2015 |
Materials |
8-383 |
Complete |
ASTM |
F1926/F1926M-14 |
Standard Test Method for Evaluation of the Environmental Stability of Calcium Phosphate Granules, Fabricated Forms, and Coatings |
| 04/04/2016 |
Materials |
8-415 |
Complete |
ASTM |
F2778-09 (Reapproved 2020) |
Standard Test Method for Measurement of Percent Crystallinity of Polyetheretherketone (PEEK) Polymers by Means of Specular Reflectance Fourier Transform Infrared Spectroscopy (R-FTIR) |
| 06/07/2018 |
Materials |
8-113 |
Complete |
ASTM |
F1147-05 (Reapproved 2017)e1 |
Standard Test Method for Tension Testing of Calcium Phosphate and Metallic Coatings |
| 12/18/2023 |
Cardiovascular |
3-189 |
Complete |
ASTM |
F2942-19 |
Standard Guide for in vitro Axial, Bending, and Torsional Durability Testing of Vascular Stents |
| 06/07/2018 |
General Plastic Surgery/
General Hospital |
6-270 |
Complete |
ASTM |
F1840-10 (Reapproved 2023) |
Standard Terminology for Surgical Suture Needles |
| 06/07/2018 |
Biocompatibility |
2-249 |
Complete |
ISO |
10993-16 Third edition 2017-05 |
Biological evaluation of medical devices - Part 16: Toxicokinetic study design for degradation products and leachables |
| 09/17/2018 |
ObGyn/
Gastroenterology/
Urology |
9-117 |
Complete |
ISO |
16038 Second edition 2017-11 |
Male condoms - Guidance on the use of ISO 4074 and ISO 23409 in the quality management of condoms |
| 01/14/2019 |
Cardiovascular |
3-66 |
Complete |
ASTM |
F2081-06 (Reapproved 2017) |
Standard Guide for Characterization and Presentation of the Dimensional Attributes of Vascular Stents |
| 05/29/2024 |
Anesthesiology |
1-167 |
Complete |
CGA |
V-5:2019 |
Diameter-Index Safety System (Noninterchangeable Low Pressure Connections for Medical Gas Applications) |
| 12/19/2022 |
Anesthesiology |
1-154 |
Complete |
ASME |
PVHO-1-2019 |
Safety Standard for Pressure Vessels for Human Occupancy |
| 08/21/2017 |
Orthopedic |
11-269 |
Complete |
ASTM |
F2423-11 (Reapproved 2020) |
Standard Guide for Functional, Kinematic, and Wear Assessment of Total Disc Prostheses |
| 08/14/2015 |
Sterility |
14-465 |
Complete |
ISO ASTM |
51707 Third edition 2015-03-15 |
Guide for estimating uncertainties in dosimetry for radiation processing |
| 12/23/2019 |
Orthopedic |
11-360 |
Complete |
ASTM |
F1378-18e1 |
Standard Specification for Shoulder Prostheses |
| 12/23/2019 |
Physical Medicine |
16-218 |
Complete |
RESNA ANSI |
WC-1:2019 Section 13 |
American National Standard for Wheelchairs - Volume 1: Requirements and Test Methods for Wheelchairs (including Scooters) Section 13: Determination of Coefficient of Friction of Test Surfaces |
| 12/23/2024 |
Anesthesiology |
1-184 |
Complete |
ISO |
80601-2-55 Second edition 2018-02 [Including AMD1:2023] |
Medical electrical equipment - Part 2-55: Particular requirements for the basic safety and essential performance of respiratory gas monitor [Including Amendment 1 (2023)]. |
| 01/27/2015 |
Dental/
ENT |
4-136 |
Complete |
ASTM |
F2504-05 (Reapproved 2022) |
Standard Practice for Describing System Output of Implantable Middle Ear Hearing Devices |
| 01/30/2014 |
Sterility |
14-403 |
Complete |
ASTM |
F2054/F2054M-13 (Reapproved 2020) |
Standard Test Method for Burst Testing of Flexible Package Seals Using Internal Air Pressurization Within Restraining Plates |
| 12/23/2016 |
Software/
Informatics |
13-87 |
Complete |
ISO IEC |
15026-2 First edition 2011-02-15 |
Systems and software engineering - Systems and software assurance - Part 2: Assurance case |
| 05/30/2022 |
InVitro Diagnostics |
7-312 |
Complete |
CLSI |
M39 5th Edition |
Analysis and Presentation of Cumulative Antimicrobial Susceptibility Test Data |
| 01/14/2019 |
Anesthesiology |
1-138 |
Complete |
ISO |
80601-2-74 First edition 2017-05 |
Medical electrical equipment - Part 2-74: Particular requirements for basic safety and essential performance of respiratory humidifying equipment |
| 01/14/2019 |
Tissue Engineering |
15-47 |
Complete |
ISO |
22442-3 First edition 2007-12-15 |
Medical devices utilizing animal tissues and their derivatives - Part 3: Validation of the elimination and/or inactivation of viruses and transmissible spongiform encephalopathy (TSE) Agents. |
| 05/29/2023 |
Materials |
8-604 |
Complete |
ASTM |
F2257-22 |
Standard Specification for Wrought Seamless or Welded and Drawn 18Chromium-14Nickel-2.5Molybdenum Stainless Steel Small Diameter Tubing for Surgical Implants (UNS S31673) |
| 12/19/2022 |
Nanotechnology |
18-21 |
Complete |
ISO |
TS 80004-6 Second edition 2021-03 |
Nanotechnologies - Vocabulary - Part 6: Nano-object characterization |
| 07/15/2019 |
Orthopedic |
11-352 |
Complete |
ISO |
14242-1 Third edition 2014-10-15 |
Implants for surgery - Wear of total hip-joint prostheses - Part 1: Loading and displacement parameters for wear-testing machines and corresponding environmental conditions for test [Including AMENDMENT 1 (2018)] |
| 05/29/2023 |
Dental/
ENT |
4-308 |
Complete |
ISO |
14708-7 Second edition 2019-12 |
Implants for surgery - Active implantable medical devices - Part 7: Particular requirements for cochlear and auditory brainstem implant systems |
| 07/09/2014 |
Software/
Informatics |
13-65 |
Complete |
UL ANSI |
1998 Third Edition 2013 |
Standards for Safety Software in Programmable Components, Second Edition. [This Standard contains revisions through and including October 28, 2008] |
| 12/18/2023 |
Dental/
ENT |
4-315 |
Complete |
ISO |
24234 Third edition 2021-08 |
Dentistry - Dental Amalgam |
| 04/04/2016 |
Sterility |
14-333 |
Complete |
ISO |
17665-1 First edition 2006-08-15 |
Sterilization of health care products - Moist heat - Part 1: Requirements for the development, validation and routine control of a sterilization process for medical devices |
| ANSI AAMI ISO |
17665-1:2006/(R)2013 |
Sterilization of health care products -- Moist heat -- Part 1: Requirements for the development, validation, and routine control of a sterilization process for medical devices |
| 05/29/2023 |
General Plastic Surgery/
General Hospital |
6-488 |
Complete |
ASTM |
F1671/F1671M-22 |
Standard Test Method for Resistance of Materials Used in Protective Clothing to Penetration by Blood-Borne Pathogens Using Phi-X174 Bacteriophage Penetration as a Test System |
| 01/14/2019 |
Sterility |
14-518 |
Complete |
AAMI ANSI |
ST55:2016/(R)2023 |
Table-top steam sterilizers |
| 07/26/2016 |
Biocompatibility |
2-170 |
Complete |
ISO |
10993-14 First edition 2001-11-15 |
Biological evaluation of medical devices - Part 14: Identification and quantification of degradation products from ceramics |
| ANSI AAMI ISO |
10993-14:2001/(R) 2011 |
Biological evaluation of medical devices - Part 14: Identification and quantification of degradation products form ceramics |
| 01/14/2019 |
Neurology |
17-14 |
Complete |
ANSI AAMI |
NS4:2013(R)2017 |
Transcutaneous Electrical Nerve Stimulators |
| 01/14/2019 |
Physical Medicine |
16-204 |
Complete |
ISO |
7176-6 Third edition 2018-06 |
Wheelchairs - Part 6: Determination of maximum speed of electrically powered wheelchairs |
| 01/14/2019 |
Cardiovascular |
3-79 |
Complete |
ASTM |
F2079-09 (Reapproved 2017) |
Standard Test Method for Measuring Intrinsic Elastic Recoil of Balloon-Expandable Stents |
| 05/29/2023 |
Radiology |
12-347 |
Complete |
IEC |
60601-2-33 Edition 4.0 2022-08 |
Medical electrical equipment - Part 2-33: Particular requirements for the basic safety and essential performance of magnetic resonance equipment for medical diagnosis |
| 05/29/2024 |
Cardiovascular |
3-192 |
Complete |
ISO |
22679 First edition 2021-11 |
Cardiovascular implants - Transcatheter cardiac occluders
|
| 12/21/2020 |
Biocompatibility |
2-280 |
Complete |
ASTM |
F1408-20a |
Standard Practice for Subcutaneous Screening Test for Implant Materials |
| 07/15/2019 |
Biocompatibility |
2-264 |
Complete |
ASTM |
F2148-18 |
Standard Practice for Evaluation of Delayed Contact Hypersensitivity Using the Murine Local Lymph Node Assay (LLNA). |
| 05/29/2024 |
Anesthesiology |
1-169 |
Complete |
CGA |
V-1:2021 |
Standard for Compressed Gas Cylinder Valve Outlet and Inlet Connection |
| 12/23/2024 |
Dental/
ENT |
4-333 |
Complete |
ISO |
3630-4 Second edition 2023-08 |
Dentistry - Endodontic instruments - Part 4: Auxiliary instruments |
| 12/22/2025 |
InVitro Diagnostics |
7-346 |
Complete |
CLSI |
EP32 2nd Edition |
Implementation of Metrological Traceability in Laboratory Medicine |
| 12/19/2022 |
General II (ES/
EMC) |
19-48 |
Complete |
IEEE ANSI |
USEMCSC C63.27-2021 |
American National Standard for Evaluation of Wireless Coexistence |
| 12/19/2022 |
InVitro Diagnostics |
7-313 |
Complete |
CLSI |
EP27 2nd Edition |
Constructing and Interpreting an Error Grid for Quantitative Measurement Procedures |
| 12/19/2022 |
ObGyn/
Gastroenterology/
Urology |
9-142 |
Complete |
ASTM |
D1894-14 |
Standard Test Method for Static and Kinetic Coefficients of Friction of Plastic Film and Sheeting |
| 03/31/2006 |
Radiology |
12-136 |
Complete |
ISO |
9236-1 Second edition 2004-02-01 |
Photography - Sensitometry of screen/film systems for medical radiography - Part 1: Determination of sensitometric curve shape, speed and average gradient |
| 01/14/2019 |
Radiology |
12-323 |
Complete |
ISO |
11990 Third edition 2018-08 |
Lasers and laser-related equipment - Determination of laser resistance of tracheal tube shaft and tracheal tube cuffs |
| 01/14/2019 |
Radiology |
12-324 |
Complete |
ISO |
13694 Third edition 2018-11 |
Optics and Photonics - Lasers and laser-related equipment - Test methods for laser beam power (energy) density distribution |
| 12/23/2019 |
Materials |
8-480 |
Complete |
ASTM |
F2063-18 |
Standard Specification for Wrought Nickel-Titanium Shape Memory Alloys for Medical Devices and Surgical Implants |
| 12/23/2019 |
Materials |
8-484 |
Complete |
ASTM |
F2066-18 |
Standard Specification for Wrought Titanium-15 Molybdenum Alloy for Surgical Implant Applications (UNS R58150) |
| 12/22/2025 |
InVitro Diagnostics |
7-347 |
Complete |
CLSI |
EP21 3rd Edition |
Evaluation of Total Analytical Error for Quantitative Medical Laboratory Measurement Procedures |
| 12/22/2025 |
InVitro Diagnostics |
7-351 |
Complete |
CLSI |
EP46 1st Edition |
Determining Allowable Total Error Goals and Limits for Quantitative Medical Laboratory Measurement Procedures |
| 12/19/2022 |
Physical Medicine |
16-233 |
Complete |
ISO |
16840-10 Second edition 2021-06 Corrected version 2022-01 |
Wheelchair seating - Part 10: Resistance to ignition of postural support devices - Requirements and test method |
| 05/29/2023 |
Materials |
8-600 |
Complete |
ASTM |
F1978-22 |
Standard Test Method for Measuring Abrasion Resistance of Metallic Thermal Spray Coatings by Using the Taber Abraser |
| 05/29/2023 |
Materials |
8-601 |
Complete |
ASTM |
F2516-22 |
Standard Test Method for Tension Testing of Nickel-Titanium Superelastic Materials |
| 07/15/2019 |
Materials |
8-506 |
Complete |
ASTM |
F2516-18 |
Standard Test Method for Tension Testing of Nickel-Titanium Superelastic Materials |
| 01/14/2019 |
General I (QS/
RM) |
5-122 |
Complete |
ASME |
V&V 40-2018 |
Assessing Credibility of Computational Modeling Through Verification and Validation: Application to Medical Devices |
| 12/23/2019 |
Materials |
8-505 |
Complete |
ISO |
6474-2 Second edition 2019-03 |
Implants for surgery - Ceramic materials - Part 2: Composite materials based on a high-purity alumina matrix with zirconia reinforcement |
| 08/21/2017 |
General II (ES/
EMC) |
19-24 |
Complete |
IEC |
60086-5 Edition 4.0 2016-07 |
Primary batteries - Part 5: Safety of batteries with aqueous electrolyte |
| 05/26/2025 |
InVitro Diagnostics |
7-331 |
Complete |
CLSI |
AUTO02-A2 |
Laboratory Automation: Bar Codes for Specimen Container Identification - Second Edition |
| 05/26/2025 |
General Plastic Surgery/
General Hospital |
6-511 |
Complete |
ISO |
11040-4 Fourth edition 2024-06 |
Prefilled syringes - Part 4: Glass barrels for injectables and sterilized subassembled syringes ready for filling |
| 05/26/2025 |
ObGyn/
Gastroenterology/
Urology |
9-151 |
Complete |
ASTM |
F1828-22 |
Standard Specification for Ureteral Stents |
| 01/14/2019 |
Biocompatibility |
2-145 |
Complete |
ASTM |
F1439-03 (Reapproved 2018) |
Standard Guide for Performance of Lifetime Bioassay for the Tumorigenic Potential of Implant Materials |
| 09/17/2018 |
Materials |
8-467 |
Complete |
ASTM |
F1978-18 |
Standard Test Method for Measuring Abrasion Resistance of Metallic Thermal Spray Coatings by Using the Taber Abraser |
| 12/18/2023 |
Orthopedic |
11-409 |
Complete |
ASTM |
F3495-23 |
Standard Test Methods for Determining the Static Failure Load of Ceramic Knee Femoral Components |
| 07/09/2014 |
Software/
Informatics |
13-68 |
Complete |
ISO |
11073-90101 First edition 2008-01-15 |
Health informatics - Point-of-care medical device communication - Part 90101: Analytical instruments -- Point-of-care test |
| 08/14/2015 |
Software/
Informatics |
13-76 |
Complete |
ISO |
11073-91064 First edition 2009-05-01 |
Health informatics - Standard communication protocol - Computer-assisted electrocardiography |
| 08/21/2017 |
Biocompatibility |
2-246 |
Complete |
ASTM |
F1877-16 |
Standard Practice for Characterization of Particles |
| 12/23/2024 |
Cardiovascular |
3-194 |
Complete |
ISO |
7199 Fourth edition 2024-09 |
Cardiovascular implants and artificial organs - Blood-gas exchangers (oxygenators) |
| 07/09/2014 |
Anesthesiology |
1-99 |
Complete |
ASTM |
G175-13 (Reapproved 2021) |
Standard Test Method for Evaluating the Ignition Sensitivity and Fault Tolerance of Oxygen Regulators Used for Medical and Emergency Applications |
| 07/09/2014 |
Radiology |
12-280 |
Complete |
IEC |
62555 Edition 1.0 2013-11 |
Ultrasonics -- Power measurement -- High intensity therapeutic ultrasound (HITU) transducers and systems |
| 07/09/2014 |
Radiology |
12-281 |
Complete |
IEC |
60601-2-62 Edition 1.0 2013-07 |
Medical electrical equipment - Part 2-62: Particular requirements for the basic safety and essential performance of high intensity therapeutic ultrasound (HITU) equipment |
| 07/09/2014 |
Radiology |
12-283 |
Complete |
ISO |
12609-2 First edition 2013-07-15 |
Eyewear for protection against intense light sources used on humans and animals for cosmetic and medical applications -- Part 2: Guidance for use |
| 09/17/2018 |
Orthopedic |
11-327 |
Complete |
ASTM |
F543-17 |
Standard Specification and Test Methods for Metallic Medical Bone Screws |
| 12/23/2024 |
Orthopedic |
11-415 |
Complete |
ASTM |
F2554-22 |
Standard Practice for Measurement of Positional Accuracy of Computer-Assisted Surgical Systems |
| 05/29/2023 |
ObGyn/
Gastroenterology/
Urology |
9-147 |
Complete |
ISO CIE |
11664-2 First edition 2022-08 |
Colorimetry - Part 2: CIE standard illuminants |
| 12/23/2024 |
Materials |
8-627 |
Complete |
ASTM |
F3604-23 |
Standard Practice for Validating the Additive Manufacturing (AM) Production Process for Medical Devices Produced Using Laser Powder Bed Fusion. |
| 12/19/2022 |
Anesthesiology |
1-153 |
Complete |
NFPA |
99:2021 |
Health Care Facilities Code |
| 07/06/2020 |
ObGyn/
Gastroenterology/
Urology |
9-129 |
Complete |
ISO CIE |
61966-2-1 First edition 1999-10 |
Multimedia systems and equipment - Colour measurement and management - Part 2-1: Colour management - Default RGB colour space - sRGB [Including: Amendment 1 (2003) and Corrigendum 1 (2014)] |
| 08/14/2015 |
Radiology |
12-290 |
Complete |
IEC |
61910-1 Edition 1.0 2014-09 |
Medical electrical equipment - Radiation dose documentation - Part 1: Radiation dose structured reports for radiography and radioscopy |
| 07/06/2020 |
ObGyn/
Gastroenterology/
Urology |
9-126 |
Complete |
ISO CIE |
11664-3 First edition 2019-06 |
Colorimetry - Part 3: CIE tristimulus values |
| 12/23/2024 |
Materials |
8-626 |
Complete |
ASTM |
E2948-24 |
Standard Test Method for Conducting Rotating Bending Fatigue Tests of Solid Round Fine Wire |
| 05/29/2023 |
ObGyn/
Gastroenterology/
Urology |
9-149 |
Complete |
IEC |
60601-2-39 Edition 3.0 2018-04 |
Medical electrical equipment Part 2-39: Particular requirements for basic safety and essential performance of peritoneal dialysis equipment
|
| 05/29/2023 |
Radiology |
12-351 |
Complete |
IEC |
60601-2-43 Edition 3.0 2022-12 |
Medical electrical equipment - Part 2-43: Particular requirements for the safety and essential performance of X-ray equipment for interventional procedures |
| 12/21/2020 |
Biocompatibility |
2-282 |
Complete |
ISO |
14155 Third edition 2020-07 |
Clinical investigation of medical devices for human subjects - Good clinical practice |
| 12/23/2024 |
Cardiovascular |
3-197 |
Complete |
ISO |
25539-4 First edition 2021-11 |
Cardiovascular implants - Endovascular devices - Part 4: Application of ISO 17327-1 for coated endovascular devices |
| 10/07/2024 |
Anesthesiology |
1-181 |
Complete |
ASME |
PVHO-1-2023 |
Safety Standard for Pressure Vessels for Human Occupancy |
| 09/09/2024 |
Sterility |
14-460 |
Complete |
ISO |
11140-1 Third edition 2014-11-01 |
Sterilization of health care products - Chemical indicators - Part 1: General requirements |
| ANSI AAMI ISO |
11140-1:2014 |
Sterilization of health care products - Chemical indicators - Part 1: General requirements |
| 09/09/2024 |
Sterility |
14-605 |
Complete |
ISO |
13004 First edition 2022-10 |
Sterilization of health care products - Radiation - Substantiation of selected sterilization dose: Method VDmaxSD |
| ANSI AAMI ISO |
13004:2022 |
Sterilization of health care products - Radiation - Substantiation of selected sterilization dose: Method VDmaxSD |
| 07/06/2020 |
ObGyn/
Gastroenterology/
Urology |
9-124 |
Complete |
CIE ISO |
11664-1:2019 |
Colorimetry - Part 1: CIE standard colorimetric observers |
| 08/21/2017 |
Software/
Informatics |
13-94 |
Complete |
ISO IEEE |
11073-10424 First edition 2016-06-15 |
Health informatics - Personal health device communication - Part 10424: Device specialization - Sleep Apnoea Breathing Therapy Equipment (SABTE) [Including TECHNICAL CORRIGENDUM 1 (2018)] |
| 03/14/2011 |
Radiology |
12-226 |
Complete |
IEC |
61223-2-6 Second Edition 2006-11 |
Evaluation and routine testing in medical imaging departments - Part 2-6: Constancy tests - Imaging performance of computed tomography X-ray equipment |
| 12/22/2025 |
Dental/
ENT |
4-364 |
Complete |
ISO |
3990 First edition 2023-07 |
Dentistry - Evaluation of antibacterial activity of dental restorative materials, luting materials, fissure sealants and orthodontic bonding or luting materials |
| 12/22/2025 |
Materials |
8-635 |
Complete |
ASTM |
F75-23 |
Standard Specification for Cobalt-28 Chromium-6 Molybdenum Alloy Castings and Casting Alloy for Surgical Implants (UNS R30075) |
| 12/22/2025 |
Materials |
8-638 |
Complete |
ASTM |
F2313-24 |
Standard Specification for Poly(glycolide) and Poly(glycolide-co-lactide) Resins for Surgical Implants with Mole Fractions Greater Than or Equal to 70 % Glycolide |
| 01/30/2014 |
Materials |
8-159 |
Complete |
ISO |
9584 First edition 1993-10-15 |
Implants for surgery -- Non-destructive testing -- Radiographic examination of cast metallic surgical implants |
| 12/23/2024 |
Dental/
ENT |
4-331 |
Complete |
ISO |
28399 Third edition 2021-03 |
Dentistry - External tooth bleaching products |
| ANSI ADA |
Standard No. 136-2022 |
Dentistry - External Tooth Bleaching Products |
| 12/20/2021 |
Dental/
ENT |
4-291 |
Complete |
ISO |
28399 First edition 2011-01 |
Dentistry - Products for external tooth bleaching |
| ANSI ADA |
Standard No. 136-2015 (R2020) |
Products for External Tooth Bleaching |
| 12/23/2024 |
Dental/
ENT |
4-332 |
Complete |
ANSI ADA |
Standard No. 206-2024 |
Implantable Materials for Bone Filling and Augmentation in Oral and Maxillofacial Surgery - Contents of a Technical File |
| 03/16/2012 |
Radiology |
12-105 |
Complete |
NEMA |
UD 2-2004 (R2009) |
Acoustic Output Measurement Standard for Diagnostic Ultrasound Equipment Revision 3 |
| 07/06/2020 |
ObGyn/
Gastroenterology/
Urology |
9-127 |
Complete |
ISO CIE |
11664-4 First edition 2019-06 |
Colorimetry - Part 4: CIE 1976 L*a*b* colour space |
| 07/15/2019 |
Biocompatibility |
2-266 |
Complete |
ASTM |
F2382-18 |
Standard Test Method for Assessment of Circulating Blood-Contacting Medical Device Materials on Partial Thromboplastin Time (PTT) |
| 12/23/2024 |
General I (QS/
RM) |
5-143 |
Complete |
ISO |
14630 Fffth edition 2024-09 |
Non-active surgical implants -- General requirements |
| 12/21/2020 |
Dental/
ENT |
4-272 |
Complete |
ANSI ADA |
Standard No. 63-2013 |
Root Canal Barbed Broaches and Rasps |
| 07/06/2020 |
Cardiovascular |
3-167 |
Complete |
ISO |
TS 81060-5 First edition 2020-02 |
Non-invasive sphygmomanometers - Part 5: Requirements for the repeatability and reproducibility of NIBP simulators for testing of automated non-invasive sphygmomanometers |
| 06/27/2016 |
Materials |
8-429 |
Complete |
ASTM |
F2224-09 (Reapproved 2020) |
Standard Specification for High Purity Calcium Sulfate Hemihydrate or Dihydrate for Surgical Implants |
| 08/21/2017 |
Cardiovascular |
3-149 |
Complete |
ISO |
25539-1 Second edition 2017-02 |
Cardiovascular implants - Endovascular devices - Part 1: Endovascular prostheses |
| ANSI AAMI ISO |
25539-1:2017 |
Cardiovascular implants - Endovascular devices - Part 1: Endovascular prostheses |
| 12/23/2024 |
Anesthesiology |
1-187 |
Complete |
ISO |
80601-2-12 Third edition 2023-11 |
Medical electrical equipment - Part 2-12: Particular requirements for basic safety and essential performance of critical care ventilators |
| 06/07/2018 |
Anesthesiology |
1-135 |
Complete |
ISO |
18562-2 First edition 2017-03 |
Biocompatibility evaluation of breathing gas pathways in healthcare applications - Part 2: Tests for emissions of particulate matter |
| 07/15/2019 |
Physical Medicine |
16-206 |
Complete |
ISO |
7176 - 30 First edition 2018-12 |
Wheelchairs --Part 30: Wheelchairs for changing occupant posture --Test methods and requirements |
| 07/15/2019 |
Orthopedic |
11-353 |
Complete |
ISO |
18192-3 First edition 2017-06 |
Implants for surgery - Wear of total intervertebral spinal disc prostheses - Part 3: Impingement-wear testing and corresponding environmental conditions for test of lumbar prostheses under adverse kinematic conditions |
| 07/15/2019 |
Materials |
8-514 |
Complete |
ISO |
5834-2 Fifth edition 2019-02 |
Implants for surgery - Ultra-high-molecular-weight polyethylene - Part 2: Moulded forms |
| 12/22/2025 |
Materials |
8-630 |
Complete |
ASTM |
F90-24 |
Standard Specification for Wrought Cobalt-20 Chromium-15 Tungsten-10 Nickel Alloy for Surgical Implant Applications (UNS R30605) |
| 12/18/2023 |
Dental/
ENT |
4-316 |
Complete |
ISO |
20127 Second edition 2020-08 |
Dentistry - Physical properties of powered toothbrushes |
| ANSI ADA |
Standard No.120-2022 |
Dentistry - Physical Properties of Powered Toothbrushes |
| 09/09/2024 |
Sterility |
14-604 |
Complete |
ISO |
11737-3 First Edition 2023-06 |
Sterilization of health care products - Microbiological methods - Part 3: Bacterial endotoxin testing |
| 07/15/2019 |
Biocompatibility |
2-268 |
Complete |
ISO |
TS 21726 First edition 2019-02 |
Biological evaluation of medical devices - Application of the threshold of toxicological concern (TTC) for assessing biocompatibility of medical device constituents |
| 07/06/2020 |
General I (QS/
RM) |
5-126 |
Complete |
ISTA |
3A 2018 |
Packaged-Products for Parcel Delivery System Shipment 70 kg (150 lb) or Less |
| 12/19/2022 |
General Plastic Surgery/
General Hospital |
6-484 |
Complete |
ASTM |
F3502-22a |
Standard Specification for Barrier Face Coverings |
| 05/29/2023 |
Physical Medicine |
16-234 |
Complete |
ISO |
7176-14 Third Edition 2022 |
Wheelchairs - Part 14: Power and control systems for electrically powered wheelchairs and scooters - Requirements and test methods |
| 05/29/2023 |
Biocompatibility |
2-300 |
Complete |
ISO |
10993-2 Third edition 2022-11 |
Biological Evaluation of medical devices - Part 2: Animal welfare requirements |
| 12/18/2023 |
Dental/
ENT |
4-318 |
Complete |
ISO |
20749 Second edition 2023-06 |
Dentistry - Pre-capsulated dental amalgam |
| 07/15/2019 |
Materials |
8-513 |
Complete |
ISO |
20160 First edition 2006-05-01 |
Implants for surgery - Metallic materials - Classification of microstructures for alpha+beta titanium alloy bars |
| 07/15/2019 |
General II (ES/
EMC) |
19-35 |
Complete |
UL |
Standard for Standby Batteries |
1989 Edition 5, 2013-10-02, ANSI November 2018 |
| 12/21/2020 |
Materials |
8-538 |
Complete |
ASTM |
F2759-19 |
Standard Guide for Assessment of the Ultra High Molecular Weight Polyethylene (UHMWPE) Used in Orthopedic and Spinal Devices |
| 05/29/2023 |
Sterility |
14-588 |
Complete |
AAMI |
TIR17:2017/(R)2020 |
Compatibility of materials subjected to sterilization |
| 10/09/2023 |
Software/
Informatics |
13-131 |
Complete |
ANSI AAMI |
SW96:2023 |
Standard for medical device security - Security risk management for device manufacturers |
| 12/23/2019 |
Dental/
ENT |
4-262 |
Complete |
IEC |
80601-2-60 Edition 2.0 2019-06 |
Medical electrical equipment - Part 2-60: Particular requirements for the basic safety and essential performance of dental equipment |
| 03/16/2012 |
Radiology |
12-241 |
Complete |
IEC |
62274 First Edition 2005-05 |
Medical electrical equipment - Safety of radiotherapy record and verify systems |
| 12/19/2022 |
Anesthesiology |
1-160 |
Complete |
ISO |
80601-2-84 First edition 2020-07 |
Medical electrical equipment - Part 2-84: Particular requirements for the basic safety and essential performance of ventilators for the emergency medical services environment |
| 08/14/2015 |
Software/
Informatics |
13-77 |
Complete |
ISO IEC |
29147 First edition 2014-02-15 |
Information technology - Security techniques - Vulnerability disclosure |
| 01/14/2019 |
Anesthesiology |
1-114 |
Complete |
ISO |
18835 First Edition 2015-04-01 |
Inhalational Anaesthesia Systems - Draw-over Anaesthetic Systems |
| 07/06/2020 |
Materials |
8-535 |
Complete |
ISO ASTM |
52911-2: First Edition 2019-09 |
Additive Manufacturing - Design - Part 2: Laser-based powder bed fusion of polymers |
| 07/06/2020 |
Radiology |
12-334 |
Complete |
AAMI |
RT3:2020 |
Radiation therapy machine characterization |
| 12/22/2025 |
Anesthesiology |
1-199 |
Complete |
ISO |
80601-2-70 Third edition 2025-11 |
Medical electrical equipment - Part 2-70: Particular requirements for the basic safety and essential performance of sleep apnoea breathing therapy equipment |
| 12/23/2024 |
Sterility |
14-608 |
Complete |
AAMI |
TIR106:2024 |
Microbiological methods - Understanding and use of product bioburden data |
| 12/23/2019 |
Radiology |
12-329 |
Complete |
IEC |
60601-2-43 Edition 2.2 2019-10 CONSOLIDATED VERSION |
Medical electrical equipment - Part 2-43: Particular requirements for the safety and essential performance of X-ray equipment for interventional procedures |
| 07/06/2020 |
Materials |
8-536 |
Complete |
ISO ASTM |
52902:First Edition 2019-07 |
Additive Manufacturing -Test Artifacts - Geometric capability assessment of additive manufacturing systems |
| 07/06/2020 |
Tissue Engineering |
15-61 |
Complete |
ASTM |
F2150-19 |
Standard Guide for Characterization and Testing of Biomaterial Scaffolds Used in Regenerative Medicine and Tissue-Engineered Medical Products |
| 12/23/2019 |
Materials |
8-523 |
Complete |
ASTM |
F3275-19 |
Standard Guide for Using a Force Tester to Evaluate Performance of a Brush Part Designed to Clean the Internal Channel of a Medical Device |
| 12/22/2025 |
General Plastic Surgery/
General Hospital |
6-520 |
Complete |
ASTM |
F3352/F3352M-23b |
Standard Specification for Isolation Gowns Intended for Use in Healthcare Facilities |
| 05/26/2025 |
Anesthesiology |
1-194 |
Complete |
ISO |
27427 Fourth edition 2023-07 |
Anaesthetic and respiratory equipment - Nebulizing systems and components |
| 08/06/2013 |
Software/
Informatics |
13-53 |
Complete |
ISO IEEE |
11073-10415 First edition 2010-05-01 |
Health informatics - Point-of-care medical device communication - Part 10415: Device specialization - Weighing scale |
| 01/14/2019 |
Cardiovascular |
3-158 |
Complete |
ASTM |
F3320-18 |
Standard Guide forCoating Characterization of Drug Coated Balloons |
| 01/14/2019 |
Dental/
ENT |
4-255 |
Complete |
ANSI ADA |
Standard No. 131-2015 (R2020) |
Dental CAD/CAM Machinable Zirconia Blanks |
| 07/15/2019 |
Orthopedic |
11-355 |
Complete |
ISO |
15142-1 First edition 2003-08-01 |
Implants for surgery - Metal intramedullary nailing systems - Part 1: Intramedullary nails |
| 01/14/2019 |
General Plastic Surgery/
General Hospital |
6-411 |
Complete |
ASTM |
D6499-18 |
Standard Test Method for Immunological Measurement of Antigenic Protein in Hevea Natural Rubber (HNR) and its Products |
| 05/30/2022 |
Materials |
8-583 |
Complete |
ASTM |
F562-22 |
Standard Specification for Wrought 35Cobalt-35Nickel-20Chromium-10Molybdenum Alloy for Surgical Implant Applications (UNS R30035) |
| 12/20/2021 |
Materials |
8-566 |
Complete |
ASTM |
F1813-21 |
Standard Specification for Wrought Titanium - 12 Molybdenum - 6 Zirconium - 2 Iron Alloy for Surgical Implant (UNS R58120) |
| 12/20/2021 |
Materials |
8-567 |
Complete |
ASTM |
F86-21 |
Standard Practice for Surface Preparation and Marking of Metallic Surgical Implants |
| 12/20/2021 |
Materials |
8-568 |
Complete |
ASTM |
F1586-21 |
Standard Specification for Wrought Nitrogen Strengthened 21 Chromium-10 Nickel-3 Manganese-2.5 Molybdenum Stainless Steel Bar for Surgical Implants (UNS S31675) |
| 12/20/2021 |
Materials |
8-569 |
Complete |
ASTM |
F648-21 |
Standard Specification for Ultra-High-Molecular-Weight Polyethylene Powder and Fabricated Form for Surgical Implants |
| 12/20/2021 |
General Plastic Surgery/
General Hospital |
6-471 |
Complete |
USP-NF |
M88880_05_01 |
Sterile Water for Irrigation |
| 12/23/2016 |
InVitro Diagnostics |
7-267 |
Complete |
CLSI |
C24 4th Edition (Replaces C24-A3) |
Statistical Quality Control for Quantitative Measurement Procedures: Principles and Definitions |
| 05/30/2022 |
Materials |
8-584 |
Complete |
ASTM |
F2146-22 |
Standard Specification for Wrought Titanium-3Aluminum-2.5Vanadium Alloy Seamless Tubing for Surgical Implant Applications (UNS R56320) |
| 08/06/2013 |
Radiology |
12-253 |
Complete |
IEC |
60976 Edition 2.0 2007-10 |
Medical electrical equipment - Medical electron accelerators - Functional performance characteristics |
| 08/06/2013 |
Radiology |
12-255 |
Complete |
IEC |
60601-2-11 Edition 3.0 2013-01 |
Medical electrical equipment - Part 2-11: Particular requirements for the basic safety and essential performance of gamma beam therapy equipment |
| 07/15/2019 |
Materials |
8-510 |
Complete |
ASTM |
F997-18 |
Standard Specification for Polycarbonate Resin for Medical Applications |
| 07/15/2019 |
Anesthesiology |
1-143 |
Complete |
ISO |
80601-2-79 First edition 2018-07 |
Medical electrical equipment - Part 2-79: Particular requirements for basic safety and essential performance of ventilatory support equipment for ventilatory impairment |
| 12/20/2021 |
Sterility |
14-571 |
Complete |
ISO |
11138-8 First edition 2021-07 |
Sterilization of health care products - Biological indicators - Part 8: Method for validation of a reduced incubation time for a biological indicator |
| 05/30/2022 |
Cardiovascular |
3-182 |
Complete |
ASTM |
F3036-21 |
Standard Guide for Testing Absorbable Stents |
| 05/29/2023 |
Materials |
8-603 |
Complete |
ASTM |
F1472-23 |
Standard Specification for Wrought Titanium-6Aluminum-4Vanadium Alloy for Surgical Implant Applications (UNS R56400) |
| 07/06/2020 |
Orthopedic |
11-367 |
Complete |
ISO |
14243-3 Second edition 2014-11-01 |
Implants for surgery - Wear of total knee-joint prostheses - Part 3: Loading and displacement parameters for wear-testing machines with displacement control and corresponding environmental conditions for test [Including AMENDMENT1 (2020)] |
| 07/06/2020 |
Orthopedic |
11-368 |
Complete |
ASTM |
F3334-19 |
Standard Practice for Finite Element Analysis (FEA) of Metallic Orthopaedic Total Knee Tibial Components |
| 07/06/2020 |
General Plastic Surgery/
General Hospital |
6-447 |
Complete |
ISO |
8536-4 Sixth edition 2019-09 |
Infusion equipment for medical use - Part 4: Infusion sets for single use, gravity feed |
| 09/17/2018 |
Orthopedic |
11-325 |
Complete |
ASTM |
F564-17 |
Standard Specification and Test Methods for Metallic Bone Staples |
| 06/07/2021 |
Dental/
ENT |
4-275 |
Complete |
ANSI ASA |
S3.6-2018 (Reaffirmed 2023) |
American National Standard Specification for Audiometers |
| 05/26/2025 |
Software/
Informatics |
13-143 |
Complete |
AAMI |
TIR45:2023 |
Guidance on the use of AGILE practices in the development of medical device software |
| 08/06/2013 |
Software/
Informatics |
13-52 |
Complete |
ISO IEEE |
11073-10408 First edition 2010-05-01 |
Health informatics - Point-of-care medical device communication - Part 10408: Device specialization - Thermometer |
| 05/29/2024 |
Software/
Informatics |
13-133 |
Complete |
ISO IEEE |
11073-10415 Second edition 2022-12 |
Health informatics - Point-of-care medical device communication - Part 10415: Device specialization - Weighing scale |
| IEEE |
Std 11073-10415-2019 |
Health informatics - Point-of-care medical device communication - Part 10415: Device specialization - Weighing scale |
| 12/21/2020 |
Nanotechnology |
18-18 |
Complete |
ASTM |
E3247-20 |
Standard Test Method for Measuring the Size of Nanoparticles in Aqueous Media Using Dynamic Light Scattering |
| 01/14/2019 |
InVitro Diagnostics |
7-232 |
Complete |
CLSI |
MM05-A2 Vol. 32 No. 6 Replaces MM05-A Vol. 23 No. 17 |
Nucleic Acid Amplification Assays for Molecular Hematopathology; Approved Guideline - Second Edition |
| 12/23/2019 |
Materials |
8-524 |
Complete |
ASTM |
F3276-19 |
Standard Guide for Using a Force Tester to Evaluate the Performance of a Brush Part Designed to Clean the External Surface of a Medical Device |
| 05/26/2025 |
Ophthalmic |
10-137 |
Complete |
ISO |
11979-2 Third edition 2024-10 |
Ophthalmic implants - Intraocular lenses - Part 2: Optical properties and test methods |
| 05/26/2025 |
Software/
Informatics |
13-146 |
Complete |
IEEE |
11073-10103 Second edition 2023 |
Health informatics - Point-of-care medical device communication - Part 10103: Nomenclature - Implantable device, cardiac |
| 05/29/2023 |
Biocompatibility |
2-299 |
Complete |
ASTM |
F1904-23 |
Standard Guide for Testing the Biological Responses to Medical Device Particulate Debris and Degradation Products in vivo |
| 07/26/2016 |
Biocompatibility |
2-213 |
Complete |
ASTM |
F1904-14 |
Standard Practice for Testing the Biological Responses to Particles In Vivo |
| 12/21/2020 |
Materials |
8-539 |
Complete |
ASTM |
F139-19 |
Standard Specification for Wrought 18 Chromium-14 Nickel-2.5 Molybdenum Stainless Steel Sheet and Strip for Surgical Implants (UNS S31673) |
| 12/21/2020 |
Anesthesiology |
1-148 |
Complete |
ISO |
80601-2-69 Second edition 2020-11 |
Medical electrical equipment - Part 2-69: Particular requirements for the basic safety and essential performance of oxygen concentrator equipment |
| 12/21/2020 |
Anesthesiology |
1-150 |
Complete |
ISO |
8836 Fifth edition 2019-12 |
Suction catheters for use in the respiratory tract |
| 06/07/2021 |
Ophthalmic |
10-124 |
Complete |
ISO |
11979-1 Fourth edition 2018-11 |
Ophthalmic implants - Intraocular lenses - Part 1: Vocabulary |
| 05/26/2025 |
InVitro Diagnostics |
7-339 |
Complete |
CLSI |
AUTO09-A |
Remote Access to Clinical Laboratory Diagnostic Devices via the Internet; Approved Standard |
| 06/27/2016 |
Software/
Informatics |
13-84 |
Complete |
ISO IEEE |
11073-10103 First edition 2014-03-01 |
Health informatics - Point-of-care medical device communication - Part 10103: Nomenclature - Implantable device, cardiac |
| 05/26/2025 |
InVitro Diagnostics |
7-332 |
Complete |
CLSI |
AUTO01-A |
Laboratory Automation: Specimen Container/Specimen Carrier; Approved Standard |
| 03/16/2012 |
Radiology |
12-115 |
Complete |
ISO |
13695:2004 |
Optics and photonics - Lasers and laser-related equipment - Test methods for the spectral characteristics of lasers |
| 05/26/2025 |
Radiology |
12-369 |
Complete |
ISO |
11146-1 Second edition 2021-07 |
Lasers and laser-related equipment - Test methods for laser beam widths, divergence angles and beam propagation ratios - Part 1: Stigmatic and simple astigmatic beams |
| 12/18/2023 |
Orthopedic |
11-405 |
Complete |
ASTM |
F1829-23 |
Standard Test Method for Static Evaluation of Anatomic Glenoid Locking Mechanism in Shear |
| 06/07/2018 |
Anesthesiology |
1-136 |
Complete |
ISO |
18562-3 First edition 2017-03 |
Biocompatibility evaluation of breathing gas pathways in healthcare applications - Part 3: Tests for emissions of volatile organic compounds |
| 12/23/2016 |
General II (ES/
EMC) |
19-20 |
Complete |
IEEE ANSI |
C63.16-2016 (Revision of ANSI C63.16-1993) |
American National Standard Guide for Electrostatic Discharge Test Methodologies and Acceptance Criteria for Electronic Equipment |
| 08/21/2017 |
Biocompatibility |
2-247 |
Complete |
ISO |
10993-6 Third edition 2016-12-01 |
Biological evaluation of medical devices -- Part 6: Tests for local effects after implantation |
| 01/27/2015 |
Software/
Informatics |
13-72 |
Complete |
ISO IEEE |
11073-10425 First edition 2016-06-15 |
Health informatics - Personal health device communication - Part 10425: Device specialization - Continuous glucose monitor (CGM) |
| IEEE |
Std 11073-10425-2014 |
Health informatics - Personal health device communication, Part 10425: Device Specialization - Continuous Glucose Monitor (CGM) |
| 10/19/2020 |
Software/
Informatics |
13-116 |
Complete |
FIRST |
CVSS v3.0 |
Common Vulnerability Scoring System version 3.0 |
| 05/29/2024 |
Software/
Informatics |
13-137 |
Complete |
IEEE |
Std 11073-10101b-2023 |
Health informatics - Point-of-care medical device communication. Part 10101: Nomenclature |
| 12/18/2023 |
Orthopedic |
11-404 |
Complete |
ASTM |
F2887-23 |
Standard Specification for Total Elbow Prostheses |
| 08/06/2013 |
Software/
Informatics |
13-61 |
Complete |
IEC |
62443-2-1 Edition 1.0 2010-11 |
Industrial communication networks - Network and system security - Part 2-1: Establishing an industrial automation and control system security program |
| 01/14/2019 |
Anesthesiology |
1-117 |
Complete |
ISO |
5366 First edition 2016-10-01 |
Anaesthetic and respiratory equipment - Tracheostomy tubes and connectors |
| 12/21/2020 |
Materials |
8-552 |
Complete |
ASTM |
F3434-20 |
Guide for Additive manufacturing - Installation/Operation and Performance Qualification (IQ/OQ/PQ) of Laser-Beam Powder Bed Fusion Equipment for Production Manufacturing |
| 01/14/2019 |
InVitro Diagnostics |
7-178 |
Complete |
CLSI |
M22-A3 Vol 24 No. 19 Replaces M22-A2 Vol. 16 No. 16 |
Quality Control for Commercially Prepared Microbiological Culture Media; Approved Standard - Third Edition |
| 12/23/2024 |
Radiology |
12-363 |
Complete |
NEMA |
PS 3.1 - 3.20 2024e |
Digital Imaging and Communications in Medicine (DICOM) Set |
| 12/22/2025 |
General I (QS/
RM) |
5-147 |
Complete |
ISO |
80369-1 Third edition 2025-10 |
Small-bore connectors for liquids and gases in healthcare applications - Part 1: General requirements |
| 07/06/2020 |
Software/
Informatics |
13-114 |
Complete |
IEEE |
Std 11073-10101-2019 |
Health informatics - Point-of-care medical device communication. Part 10101: Nomenclature |
| 05/29/2024 |
Sterility |
14-600 |
Complete |
ASTM |
F1929-23 |
Standard Test Method for Detecting Seal Leaks in Porous Medical Packaging by Dye Penetration |
| 07/06/2020 |
Sterility |
14-542 |
Complete |
ISO ASTM |
52628 Second edition 2020-04 |
Standard practice for dosimetry in radiation processing |
| 07/15/2019 |
General Plastic Surgery/
General Hospital |
6-422 |
Complete |
AAMI |
TIR38:2019 |
Medical device safety assurance case guidance |
| 07/06/2020 |
Sterility |
14-543 |
Complete |
ISO |
11139 First edition 2018-08 |
Sterilization of health care products - Vocabulary of terms used in sterilization and related equipment and process standards |
| 07/06/2020 |
Sterility |
14-544 |
Complete |
ISO |
18472 Second edition 2018-08 |
Sterilization of health care products - Biological and chemical indicators - Test equipment |
| 01/14/2019 |
Orthopedic |
11-344 |
Complete |
ASTM |
F2580-18 |
Standard Practice for Evaluation of Modular Connection of Proximally Fixed Femoral Hip Prosthesis |
| 05/26/2025 |
Orthopedic |
11-422 |
Complete |
ASTM |
F1798-24 |
Standard Test Method for Evaluating the Static and Fatigue Properties of Interconnection Mechanisms and Subassemblies Used in Spinal Arthrodesis Implants |
| 12/23/2024 |
Sterility |
14-606 |
Complete |
ANSI AAMI |
ST24:2024 |
General-purpose ethylene oxide sterilizers with automated process control and ethylene oxide sterilant sources intended for use in health care facilities
|
| 06/07/2021 |
General Plastic Surgery/
General Hospital |
6-463 |
Complete |
IEC |
60601-2-21 Edition 3.0 2020-09 |
Medical electrical equipment - Part 2-21: Particular requirements for the basic safety and essential performance of infant radiant warmers |
| 07/06/2020 |
General I (QS/
RM) |
5-127 |
Complete |
ISTA |
3B 2017 |
Packaged-Products for Less-Than-Truckload (LTL) Shipment |
| 07/06/2020 |
General I (QS/
RM) |
5-128 |
Complete |
ISTA |
3E 2017 |
Similar Packaged-Products in Unitized Loads of Truckload Shipment |
| 06/07/2021 |
InVitro Diagnostics |
7-307 |
Complete |
CLSI |
POCT05 2nd Edition |
Performance Metrics for Continuous Interstitial Glucose Monitoring |
| 12/18/2023 |
Orthopedic |
11-402 |
Complete |
ASTM |
F1798-21 |
Standard Test Method for Evaluating the Static and Fatigue Properties of Interconnection Mechanisms and Subassemblies Used in Spinal Arthrodesis Implants |
| 05/26/2025 |
Sterility |
14-610 |
Complete |
ISO |
11138-7 First edition 2019-03 |
Sterilization of health care products - Biological indicators - Part 7: Guidance for the selection, use and interpretation of results |
| 07/15/2019 |
General Plastic Surgery/
General Hospital |
6-421 |
Complete |
ISO |
80601-2-56 Second edition 2017-03 [Including AMD1:2018] |
Medical electrical equipment - Part 2-56: Particular requirements for basic safety and essential performance of clinical thermometers for body temperature measurement. [Including: Amendment 1 (2018)]. |
| 01/30/2014 |
Sterility |
14-336 |
Complete |
ISO |
14161 Second edition 2009-09-15 |
Sterilization of health care products - Biological indicators - Guidance for the selection, use and interpretation of results |
| ANSI AAMI ISO |
14161-2009/(R)2014 |
Sterilization of health care products - Biological indicators: Guidance for the selection, use and interpretation of results |
| 07/15/2019 |
Biocompatibility |
2-265 |
Complete |
ASTM |
F2901-19 |
Standard Guide for Selecting Tests to Evaluate Potential Neurotoxicity of Medical Devices |
| 12/23/2019 |
Dental/
ENT |
4-260 |
Complete |
ANSI ASA |
S12.2-2019 (Reaffirmed 2023) |
American National Standard for Criteria for Evaluating Room Noise |
| 01/25/2013 |
Cardiovascular |
3-89 |
Complete |
ISO |
27186 First edition 2010-03-15 |
Active implantable medical devices - Four-pole connector system for implantable cardiac rhythm management devices - Dimensional and test requirements |
| ANSI AAMI ISO |
27186:2010 |
Active implantable medical devices - Four-pole connector system for implantable cardiac rhythm management devices - Dimensional and test requirements |
| 06/15/2016 |
Cardiovascular |
3-132 |
Complete |
ISO |
27185 First edition 2012-02-15 |
Cardiac Rhythm Management Devices - Symbols to be Used With Cardiac Rhythm Management Device Labels, and Information to be Supplied - General Requirements |
| ANSI AAMI ISO |
27185:2012 |
Cardiac Rhythm Management Devices -- Symbols to be Used With Cardiac Rhythm Managment Device Labels, and Information to be Supplied -- General Requirements |
| 06/07/2018 |
Materials |
8-337 |
Complete |
ASTM |
F621-12 (Reapproved 2017) |
Standard Specification for Stainless Steel Forgings for Surgical Implants |
| 12/23/2016 |
Biocompatibility |
2-245 |
Complete |
ISO |
10993-5 Third edition 2009-06-01 |
Biological evaluation of medical devices - Part 5: Tests for in vitro cytotoxicity |
| ANSI AAMI ISO |
10993-5:2009/(R)2014 |
Biological evaluation of medical devices - Part 5: Tests for in vitro cytotoxicity |
| 07/09/2014 |
Materials |
8-378 |
Complete |
ASTM |
D792-13 |
Standard Test Methods for Density and Specific Gravity (Relative Density) of Plastics by Displacement |
| 07/09/2014 |
Materials |
8-379 |
Complete |
ISO |
11542-2 First edition 1998-11-15 |
Plastics - Ultra-high-molecular-weight polyethyelene (PE-UHMW) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties [Including: Technical Corrigendum 1 (2007)] |
| 08/21/2017 |
Orthopedic |
11-280 |
Complete |
ASTM |
F2624-12 (Reapproved 2020) |
Standard Test Method for Static, Dynamic, and Wear Assessment of Extra-Discal Single Level Spinal Constructs |
| 12/21/2020 |
Dental/
ENT |
4-266 |
Complete |
ISO |
19023 First edition 2018-02 |
Dentistry - Orthodontic anchor screws |
| ANSI ADA |
Standard No. 178-2019 |
Orthodontic Anchor Screws |
| 12/21/2020 |
Dental/
ENT |
4-268 |
Complete |
ISO |
15841 Second edition 2014-08 |
Dentistry - Wires for use in orthodontics [Including AMENDMENT 1 (2020)] |
| ANSI ADA |
Standard No. 32-2017 |
Orthodontic Wires |
| 07/15/2019 |
Orthopedic |
11-357 |
Complete |
ISO |
15142-3 First edition 2003-08-01 |
Implants for surgery - Metal intramedullary nailing systems - Part 3: Connection devices and reamer diameter instruments |
| 07/06/2020 |
Sterility |
14-545 |
Complete |
ISO ASTM |
51276 Fourth edition 2019-08 |
Practice for use of a polymethylmethacrylate dosimetry system |
| 07/06/2020 |
Sterility |
14-549 |
Complete |
ASTM |
F3004-13 (Reapproved 2020) |
Standard Test Method for Evaluation of Seal Quality and Integrity Using Airborne Ultrasound |
| 04/04/2016 |
Materials |
8-403 |
Complete |
ASTM |
D638-14 |
Standard Test Method for Tensile Properties of Plastics |
| 04/04/2016 |
Materials |
8-408 |
Complete |
ASTM |
F3122-14 |
Standard Guide for Evaluating Mechanical Properties of Metal Materials Made via Additive Manufacturing Processes |
| 08/21/2017 |
Materials |
8-457 |
Complete |
ISO |
13175-3 First edition 2012-10-01 |
Implants for surgery -- Calcium phosphates -- Part 3: Hydroxyapatite and beta-tricalcium phosphate bone substitutes |
| 12/21/2020 |
Dental/
ENT |
4-265 |
Complete |
ISO |
10271 Third edition 2020-08 |
Dentistry - Corrosion test methods for metallic materials |
| ANSI ADA |
Standard No. 97-2020 |
Corrosion Test Methods for Metallic Materials |
| 01/14/2019 |
Orthopedic |
11-272 |
Complete |
ASTM |
F1714-96 (Reapproved 2025) |
Standard Guide for Gravimetric Wear Assessment of Prosthetic Hip Designs in Simulator Devices |
| 12/23/2016 |
Software/
Informatics |
13-86 |
Complete |
ISO IEC |
15026-1 First edition 2013-11-01 |
Systems and software engineering - Systems and software assurance - Part 1: Concepts and vocabulary |
| 06/27/2015 |
Sterility |
14-484 |
Complete |
ASTM |
F1929-15 |
Standard Test Method for Detecting Seal Leaks in Porous Medical Packaging by Dye Penetration |
| 12/18/2023 |
Orthopedic |
11-406 |
Complete |
ASTM |
F3141-23 |
Standard Guide for Total Knee Replacement Loading Profiles |
| 12/23/2019 |
Physical Medicine |
16-227 |
Complete |
RESNA |
WC-4:2017 Section 18 |
American National Standard for Wheelchairs - Volume 4: Wheelchairs and Transportation Section 18: Wheelchair tiedown and occupant restraint systems for use in motor vehicles. |
| 06/07/2021 |
Orthopedic |
11-383 |
Complete |
ASTM |
F3143-20 |
Standard Test Method for Determination of Frictional Torque and Friction Factor for Hip Replacement Bearings under Standard Conditions Using a Reciprocal Friction Simulator |
| 01/14/2019 |
Orthopedic |
11-342 |
Complete |
ASTM |
F732-17 (Reapproved 2025) |
Standard Test Method for Wear Testing of Polymeric Materials Used in Total Joint Prostheses |
| 01/14/2019 |
Orthopedic |
11-343 |
Complete |
ASTM |
F2346-18 |
Standard Test Methods for Static and Dynamic Characterization of Spinal Artificial Discs |
| 08/21/2017 |
Dental/
ENT |
4-215 |
Complete |
ANSI ADA |
Standard No. 96-2012 |
Dental Water-based Cements |
| 05/29/2024 |
Sterility |
14-602 |
Complete |
AAMI |
TIR12:2020/(R)2023 |
Designing, testing, and labeling medical devices intended for processing by health care facilities: A guide for device manufacturers |
| 05/29/2023 |
InVitro Diagnostics |
7-316 |
Complete |
CLSI |
NBS01 7th Edition |
Dried Blood Spot Specimen Collection for Newborn Screening |
| 01/30/2014 |
Sterility |
14-430 |
Complete |
ISO ASTM |
51607 Third edition 2013-06-01 |
Practice for use of an alanine-EPR dosimery system |
| 01/14/2019 |
Materials |
8-487 |
Complete |
ISO ASTM |
52910-18 |
Additive manufacturing - Design - Requirements, guidelines and recommendations |
| 01/14/2019 |
Materials |
8-488 |
Complete |
ASTM |
F3301-18a |
Standard for Additive Manufacturing - Post Processing Methods - Standard Specification for Thermal Post-Processing Metal Parts Made Via Powder Bed Fusion |
| 05/29/2024 |
Sterility |
14-601 |
Complete |
ISO |
17665 First edition 2024-03 |
Sterilization of health care products - Moist heat - Requirements for the development, validation and routine control of a sterilization process for medical devices |
| 05/29/2023 |
InVitro Diagnostics |
7-315 |
Complete |
CLSI |
EP12 3rd Edition |
Evaluation of Qualitative, Binary Output Examination Performance |
| 04/04/2016 |
Cardiovascular |
3-125 |
Complete |
ISO |
5841-3 Third edition 2013-04-15 |
Implants for surgery - Cardiac pacemakers - Part 3: Low-profile connectors [IS-I] for implantable pacemakers |
| 04/04/2016 |
Tissue Engineering |
15-24 |
Complete |
ASTM |
F2721-09 (Reapproved 2014) |
Standard Guide for Pre-clinical in vivo Evaluation in Critical Size Segmental Bone Defects |
| 08/06/2013 |
Software/
Informatics |
13-59 |
Complete |
ISO IEC IEEE |
15026-4 First edition 2021-10-01 |
Systems and software engineering - Systems and software assurance - Part 4: Assurance in the life cycle |
| 05/29/2024 |
Software/
Informatics |
13-134 |
Complete |
ISO IEEE |
11073-10404 Second edition 2022-12 |
Health informatics - Personal health device communication - Part 10404: Device specialization - Pulse oximeter |
| IEEE |
Std 11073-10404-2020 |
Health informatics - Personal health device communication - Part 10404: Device specialization - Pulse oximeter |
| 05/29/2023 |
Anesthesiology |
1-161 |
Complete |
ISO |
16628 Second edition 2022-06 |
Anaesthetic and respiratory equipment - Tracheobronchial tubes |
| 07/15/2019 |
Ophthalmic |
10-118 |
Complete |
ANSI |
Z80.38-2017 (R2021) |
American National Standard for Ophthalmics - Light Hazard from Operation Microscopes Used in Ocular Surgery |
| 07/15/2019 |
Dental/
ENT |
4-258 |
Complete |
ISO |
10139-2 Third edition 2016-06-15 |
Dentistry - Soft lining materials for removable dentures - Part 2: Materials for long-term use |
| ANSI ADA |
Standard No. 160-2020 |
Soft Lining Materials for Removable Dentures - Part 2: Materials for Long-Term Use |
| 07/06/2020 |
Radiology |
12-332 |
Complete |
IEC |
62464-1 Edition 2.0 2018-12 |
Magnetic resonance equipment for medical imaging Part 1: Determination of essential image quality parameters. |
| 05/29/2023 |
Nanotechnology |
18-23 |
Complete |
ASTM |
E3025-22 |
Standard Guide for Tiered Approach to Detection and Characterization of Silver Nanomaterials in Textiles |
| 09/09/2008 |
Dental/
ENT |
4-145 |
Complete |
ISO |
22803 First edition 2004-09-01 |
Dentistry - Membrane materials for guided tissue regeneration in oral and maxillofacial surgery - Contents of a technical file |
| 04/04/2016 |
Ophthalmic |
10-100 |
Complete |
ISO |
18259 First Edition 2014-10-01 |
Ophthalmic optics - Contact lens care products - Method to assess contact lens care products with contact lenses in a lens case, challenged with bacterial and fungal organisms |
| 12/23/2016 |
General I (QS/
RM) |
5-113 |
Complete |
ASTM |
D7386-16 |
Standard Practice for Performance Testing of Packages for Single Delivery Systems |
| 09/17/2018 |
Materials |
8-475 |
Complete |
ASTM |
F2026-17 |
Standard Specification for Polyetheretherketone (PEEK) Polymers for Surgical Implant Applications |
| 01/30/2014 |
Sterility |
14-427 |
Complete |
ISO |
13408-1 Second edition 2008-06-15 |
Aseptic processing of health care products - Part 1: General requirements [Including: Amendment 1 (2013)] |
| 01/27/2015 |
Sterility |
14-165 |
Complete |
ISO |
14644-5 First edition 2004-08-15 |
Cleanrooms and associated controlled environments - Part 5: Operations |
| 07/09/2014 |
Sterility |
14-257 |
Complete |
ASTM |
D3078-02 (Reapproved 2021)e1 |
Standard Test Method for Determination of Leaks in Flexible Packaging by Bubble Emission |
| 08/06/2013 |
Sterility |
14-383 |
Complete |
ISO ASTM |
51702 Third edition 2013-04-15 |
Practice for dosimetry in a gamma facility for radiation processing |
| 04/03/2023 |
General II (ES/
EMC) |
19-34 |
Complete |
IEC |
61010-1 Edition 3.1 2017-01 CONSOLIDATED VERSION |
Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 1: General requirements [Including: Corrigendum 1 (2019)]
- Note: This standard is recognized with relevant US national differences applied, see reference #1 in Relevant FDA Guidance and/or Supportive Publication section |
| 05/30/2022 |
Materials |
8-585 |
Complete |
ASTM |
F1377-21 |
Standard Specification for Cobalt-28Chromium-6Molybdenum Powder for Medical Devices (UNS R30075, UNS R31537, and UNS R31538) |
| 05/29/2023 |
ObGyn/
Gastroenterology/
Urology |
9-146 |
Complete |
ISO |
8600-4 Third Edition 2023-01 |
Endoscopes - Medical endoscopes and certain accessories - Part 4: Determination of maximum width of insertion portion |
| 01/14/2019 |
Tissue Engineering |
15-56 |
Complete |
ASTM |
F3224-17 |
Standard Test Method for Evaluating Growth of Engineered Cartilage Tissue using Magnetic Resonance Imaging |
| 08/21/2017 |
General II (ES/
EMC) |
19-25 |
Complete |
IEC |
62485-1 Edition 1.0 2015-04 |
Safety requirements for secondary batteries and battery installations - Part 1: General safety information. |
| 08/21/2017 |
General II (ES/
EMC) |
19-27 |
Complete |
IEC |
62485-3 Edition 2.0 2014-07 |
Safety requirements for secondary batteries and battery installations - Part 3: Traction batteries |
| 04/04/2016 |
Nanotechnology |
18-1 |
Complete |
ASTM |
E2490-09 (Reapproved 2021) |
Standard Guide for Measurement of Particle Size Distribution of Nanomaterials in Suspension by Photon Correlation Spectroscopy (PCS) |
| 12/20/2021 |
General Plastic Surgery/
General Hospital |
6-472 |
Complete |
USP-NF |
M36660_04_01 |
Heparin Lock Flush Solution |
| 12/20/2021 |
General Plastic Surgery/
General Hospital |
6-473 |
Complete |
USP-NF |
M80190_04_01 |
Absorbable Surgical Suture |
| 12/20/2021 |
Orthopedic |
11-387 |
Complete |
ASTM |
F1781-21 |
Standard Specification for Elastomeric Flexible Hinge Finger Total Joint Implants |
| 06/07/2021 |
Dental/
ENT |
4-281 |
Complete |
ISO |
1797 Third Edition 2017-05 |
Dentistry - Shanks for rotary and oscillating instruments |
| ANSI ADA |
Standard No. 179-2020 |
Shanks for Rotary and Oscillating Instruments |
| 05/29/2023 |
Dental/
ENT |
4-298 |
Complete |
ISO |
4049 Fifth edition 2019-05 |
Dentistry - Polymer-based restorative materials |
| ANSI ADA |
Standard No. 27-2022 |
Polymer-based Restorative Materials |
| 05/30/2022 |
Materials |
8-586 |
Complete |
ASTM |
F2989-21 |
Standard Specification for Metal Injection Molded Unalloyed Titanium Components for Surgical Implant Applications |
| 12/20/2021 |
Materials |
8-570 |
Complete |
ASTM |
F1108-21 |
Standard Specification for Titanium-6Aluminum-4Vanadium Alloy Castings for Surgical Implants (UNS R56406) |
| 12/20/2021 |
Materials |
8-571 |
Complete |
ASTM |
F2052-21 |
Standard Test Method for Measurement of Magnetically Induced Displacement Force on Medical Devices in the Magnetic Resonance Environment |
| 12/19/2022 |
Anesthesiology |
1-155 |
Complete |
ISO |
10079-2 Fourth edition 2022-03 |
Medical suction equipment - Part 2: Manually powered suction equipment |
| 12/19/2022 |
Anesthesiology |
1-156 |
Complete |
ISO |
10079-3 Fourth edition 2022-03 |
Medical suction equipment - Part 3: Suction equipment powered from a vacuum or positive pressure gas source |
| 01/14/2019 |
InVitro Diagnostics |
7-285 |
Complete |
CLSI |
M48-A 2nd Edition |
Laboratory Detection and Identification of Mycobacteria |
| 07/15/2019 |
Sterility |
14-528 |
Complete |
ISO |
11137-1 First edition 2006-04-15 |
Sterilization of health care products - Radiation - Part 1: Requirements for development, validation and routine control of a sterilization process for medical devices [Including: Amendment 1 (2013) and Amendment 2 (2018)] |
| ANSI AAMI ISO |
11137-1:2006/(R)2015 |
Sterilization of health care products - Radiation - Part 1: Requirements for development, validation, and routine control of a sterilization process for medical devices [Including: Amendment 1 (2013) and Amendment 2 (2019)] |
| 08/21/2017 |
Materials |
8-451 |
Complete |
ASTM |
F2214-16 |
Standard Test Methods for In Situ Determination of Network Parameters of Crosslinked Ultra High Molecular Weight Polyethylene (UHMWPE) |
| 12/18/2023 |
Sterility |
14-593 |
Complete |
ASTM |
F3039-23 |
Standard Test Method for Detecting Leaks in Nonporous Packaging or Flexible Barrier Materials by Dye Penetration |
| 07/06/2020 |
Cardiovascular |
3-165 |
Complete |
ASTM |
F1841-19 |
Standard Practice for Assessment of Hemolysis in Continuous Flow Blood Pumps |
| 05/26/2025 |
Cardiovascular |
3-200 |
Complete |
ASTM |
F2477-24 |
Standard Test Methods for in vitro Pulsatile Durability Testing of Vascular Stents and Endovascular Prostheses |
| 03/16/2012 |
Radiology |
12-134 |
Complete |
ISO |
11146-1 First edition 2005-01-15 |
Lasers and laser-related equipment - Test methods for laser beam widths, divergence angles and beam propagation ratios - Part 1: Stigmatic and simple astigmatic beams |
| 12/18/2023 |
Materials |
8-607 |
Complete |
ASTM |
F2082/F2082M-23 |
Determination of Transformation Temperature of Nickel-Titanium Shape Memory Alloys by Bend and Free Recovery |
| 12/23/2016 |
Materials |
8-437 |
Complete |
ASTM |
F2082/F2082M-16 |
Standard Test Method for Determination of Transformation Temperature of Nickel-Titanium Shape Memory Alloys by Bend and Free Recovery |
| 12/18/2023 |
Materials |
8-608 |
Complete |
ASTM |
F2214-23 |
Standard Test Method for In Situ Determination of Network Parameters of Crosslinked Ultra High Molecular Weight Polyethylene (UHMWPE) |
| 07/15/2019 |
Anesthesiology |
1-144 |
Complete |
ISO |
80601-2-80 First edition 2018-07 |
Medical electrical equipment - Part 2-80: Particular requirements for basic safety and essential performance of ventilatory support equipment for ventilatory insufficiency |
| 06/07/2021 |
Ophthalmic |
10-126 |
Complete |
IEC |
80601-2-58 Edition 2.0 2014-09 |
Medical electrical equipment - Part 2-58: Particular requirements for basic safety and essential performance of lens removal devices and vitrectomy devices for ophthalmic surgery [Including AMENDMENT 1 (2016)] |
| ANSI AAMI IEC |
80601-2-58:2014 |
Medical electrical equipment - Part 2-58: Particular requirements for basic safety and essential performance of lens removal devices and vitrectomy devices for ophthalmic surgery [Including AMENDMENT 1 (2016)] |
| 05/29/2024 |
Radiology |
12-357 |
Complete |
IEC |
63145-20-10 Edition 1.0 2019-08 |
Eyewear display - Part 20-10: Fundamental measurement methods - Optical properties |
| 05/29/2024 |
Radiology |
12-358 |
Complete |
IEC |
63145-20-20 Edition 1.0 2019-09 |
Eyewear display - Part 20-20: Fundamental measurement methods - Image quality |
| 05/29/2024 |
Radiology |
12-359 |
Complete |
IEC |
63145-22-10 Edition 1.0 2020-01 |
Eyewear display - Part 22-10: Specific measurement methods for AR type - Optical properties |
| 05/29/2024 |
Dental/
ENT |
4-325 |
Complete |
ANSI ADA |
Standard No. 96-2020 |
Dental Water-based Cements |
| 05/26/2025 |
Radiology |
12-370 |
Complete |
ISO |
11146-2 Second edition 2021-07 |
Lasers and laser-related equipment - Test methods for laser beam widths, divergence angles and beam propagation ratios - Part 2: General astigmatic beams |
| 05/26/2025 |
InVitro Diagnostics |
7-341 |
Complete |
CLSI |
AUTO03-A2 |
Laboratory Automation: Communications with Automated Clinical Laboratory Systems, Instruments, Devices, and Information Systems; Approved Standard - Second Edition |
| 05/26/2025 |
InVitro Diagnostics |
7-342 |
Complete |
CLSI |
AUTO12-A |
Specimen Labels: Content and Location, Fonts, and Label Orientation; Approved Standard |
| 05/26/2025 |
InVitro Diagnostics |
7-343 |
Complete |
CLSI |
AUTO07-A |
Laboratory Automation: Data Content for Specimen Identification; Approved Standard |
| 05/26/2025 |
InVitro Diagnostics |
7-345 |
Complete |
CLSI |
AUTO13-A2 (Formerly GP19-A2) |
Laboratory Instruments and Data Management Systems: Design of Software User Interfaces and End-User Software Systems Validation, Operation, and Monitoring; Approved Guideline - Second Edition |
| 05/26/2025 |
InVitro Diagnostics |
7-337 |
Complete |
CLSI |
AUTO08-A |
Managing and Validating Laboratory Information Systems; Approved Guideline |
| 12/18/2023 |
Dental/
ENT |
4-314 |
Complete |
ISO |
7494-2 Third edition 2022-07 |
Dentistry - Stationary dental units and dental patient chairs - Part 2: Air, water, suction and wastewater systems |
| 01/14/2019 |
Materials |
8-483 |
Complete |
ASTM |
F601-18 |
Standard Practice for Fluorescent Penetrant Inspection of Metallic Surgical Implants |
| 12/18/2023 |
InVitro Diagnostics |
7-318 |
Complete |
CLSI |
EP25 2nd Edition |
Evaluation of Stability of In Vitro Medical Laboratory Test Reagents |
| 05/26/2025 |
Software/
Informatics |
13-140 |
Complete |
FIRST |
CVSS v4.0 |
Common Vulnerability Scoring System version 4.0 |
| 03/16/2012 |
Radiology |
12-142 |
Complete |
ISO |
11146-2 First edition 2005-02-15 |
Lasers and laser-related equipment - Test methods for laser beam widths, divergence angles and beam propagation ratios - Part 2: General astigmatic beams |
| 12/23/2024 |
Anesthesiology |
1-190 |
Complete |
ISO |
9360-1 First edition 2000-03 |
Anaesthetic and respiratory equipment - Heat and moisture exchangers (HMEs) for humidifying respired gases in humans - Part 1: HMEs for use with minimum tidal volumes of 250 ml |
| 12/23/2024 |
Anesthesiology |
1-191 |
Complete |
ISO |
9360-2 First edition 2001-07 |
Anaesthetic and respiratory equipment - Heat and moisture exchangers (HMEs) for humidifying respired gases in humans - Part 2: HMEs for use with tracheostomized patients having minimum tidal volumes of 250 ml |
| 07/09/2014 |
Dental/
ENT |
4-97 |
Complete |
ANSI ADA |
Standard No. 57-2000 (R2012) |
Endodontic Sealing Material |
| 12/23/2024 |
Dental/
ENT |
4-329 |
Complete |
ISO |
6872 Fifth edition 2024-08 |
Dentistry - Ceramic materials |
| 05/29/2024 |
Dental/
ENT |
4-326 |
Complete |
ISO |
9687 Second edition 2015-02 |
Dentistry - Graphical symbols for dental equipment [Including AMENDMENT 1 (2018)] |
| 05/29/2024 |
Dental/
ENT |
4-327 |
Complete |
ISO |
21531 First edition 2009-02 |
Dentistry - Graphical symbols for dental instruments |
| 12/22/2025 |
Dental/
ENT |
4-351 |
Complete |
ISO |
6877 Fourth edition 2025-08 |
Dentistry - Endodontic obturating materials |
| 12/18/2023 |
Dental/
ENT |
4-309 |
Complete |
ISO |
6877 Third edition 2021-09 |
Dentistry - Endodontic obturating materials |
| ANSI ADA |
Standard No. 78-2022 |
Dentistry - Endodontic Obturating Materials |
| 05/29/2024 |
Radiology |
12-361 |
Complete |
ICDM |
IDMS Version 1.2 May 2023 |
Information Display Measurements Standard |
| 01/27/2015 |
Dental/
ENT |
4-219 |
Complete |
ISO |
29022 First edition 2013-06-01 |
Dentistry - Adhesive - Notched-edge sheer bond strength test |
| 01/30/2014 |
Materials |
8-344 |
Complete |
ISO |
7153-1 Second edition 1991-04-01 |
Surgical instruments -- Metallic materials -- Part 1: Stainless steel [Including: Amendment 1 (1999)] |
| 01/30/2014 |
Sterility |
14-401 |
Complete |
ASTM |
F2217/F2217M-13 (Reapproved 2023) |
Standard Practice for Coating/Adhesive Weight Determination |
| 05/30/2022 |
Materials |
8-593 |
Complete |
ISO |
13779-6 First Edition 2015-01-15 Corrected Version 2016-09-15 |
Implants for surgery - Hydroxyapatite - Part 6: Powders |
| 05/29/2023 |
Materials |
8-602 |
Complete |
ASTM |
F2503-23 |
Standard Practice for Marking Medical Devices and Other Items for Safety in the Magnetic Resonance Environment |
| 07/06/2020 |
Materials |
8-528 |
Complete |
ASTM |
F2503-20 |
Standard Practice for Marking Medical Devices and Other Items for Safety in the Magnetic Resonance Environment |
| 10/09/2023 |
Software/
Informatics |
13-129 |
Complete |
ISO IEC IEEE |
29119-1 Second edition 2022-01 |
Software and systems engineering - Software testing - Part 1: General concepts |
| 12/23/2019 |
Physical Medicine |
16-229 |
Complete |
RESNA ANSI |
WC-4:2017 Section 20 |
American National Standard for Wheelchairs - Volume 4: Wheelchairs and Transportation Section 20: Seating systems for use in motor vehicles |
| 12/21/2020 |
Sterility |
14-550 |
Complete |
ANSI AAMI |
ST67:2019 |
Sterilization of health care products - Requirements and guidance for selecting a sterility assurance level (SAL) for products labeled "sterile" |
| 07/15/2019 |
Sterility |
14-530 |
Complete |
ISO |
11607-1 Second edition 2019-02 |
Packaging for terminally sterilized medical devices - Part 1: Requirements for materials, sterile barrier systems and packaging systems |
| ANSI AAMI ISO |
11607-1:2019 |
Packaging for terminally sterilized medical devices - Part 1: Requirements for materials, sterile barrier systems and packaging systems |
| 12/18/2023 |
Sterility |
14-595 |
Complete |
ISO |
11607-2 Second edition 2019-02 [Including AMD1:2023] |
Packaging for terminally sterilized medical devices - Part 2: Validation requirements for forming, sealing and assembly processes [Including Amendment 1 (2023)]. |
| 08/02/2011 |
Ophthalmic |
10-65 |
Complete |
ISO |
15752 Second edition 2010-01-15 |
Ophthalmic instruments - Endoilluminators - Fundamental requirements and test methods for optical radiation safety |
| 01/15/2013 |
Software/
Informatics |
13-33 |
Complete |
AAMI |
TIR 36:2007 |
Validation of software for regulated processes |
| 01/15/2013 |
General Plastic Surgery/
General Hospital |
6-122 |
Complete |
ISO |
8536-5 Second edition 2004-02-01 |
Infusion equipment for medical use - Part 5: Burette infusion sets for single use, gravity feed |
| 03/16/2012 |
InVitro Diagnostics |
7-227 |
Complete |
CLSI |
M53-A (Replaces M53-P) |
Criteria for Laboratory Testing and Diagnosis of Human Immunodeficiency Virus Infection; Approved Guideline |
| 01/15/2013 |
InVitro Diagnostics |
7-233 |
Complete |
CLSI |
EP17-A2 |
Evaluation of Detection Capability for Clinical Laboratory Measurement Procedures; Approved Guideline - Second Edition |
| 01/15/2013 |
InVitro Diagnostics |
7-237 |
Complete |
CLSI |
MM01-A3 (Replaces MM01-A2) |
Molecular Methods for Clinical Genetics and Oncology Testing; Approved Guideline - Third Edition |
| 01/15/2013 |
InVitro Diagnostics |
7-238 |
Complete |
CLSI |
MM06-A2 (Replaces MM06-A) |
Quantitative Molecular Methods for Infectious Diseases; Approved Guideline - Second Edition |
| 12/18/2023 |
Dental/
ENT |
4-317 |
Complete |
ISO |
8325 Third edition 2023-03 |
Dentistry - Test methods for rotary instruments |
| 12/18/2023 |
InVitro Diagnostics |
7-319 |
Complete |
CLSI |
M23 6th Edition |
Development of In Vitro Susceptibility Test Methods, Breakpoints, and Quality Control Parameters |
| 07/15/2019 |
Sterility |
14-531 |
Complete |
ISO |
11607-2 Second edition 2019-02 |
Packaging for terminally sterilized medical devices - Part 2: Validation requirements for forming, sealing and assembly processes |
| ANSI AAMI ISO |
11607-2:2019 |
Packaging for terminally sterilized medical devices - Part 2: Validation requirements for forming, sealing and assembly processes |
| 06/07/2018 |
Ophthalmic |
10-109 |
Complete |
ISO |
18369-1 Second edition 2017-08 |
Ophthalmic optics - Contact lenses - Part 1: Vocabulary, classification system and recommendations for labelling specifications |
| 07/09/2014 |
Radiology |
12-194 |
Complete |
ANSI HPS |
N43.6-2007 (R2013) |
Sealed Radioactive Sources - Classification |
| 07/09/2014 |
Sterility |
14-433 |
Complete |
ASTM |
F2227-13 (Reapproved 2021) |
Standard Test Method for Non-Destructive Detection of Leaks in Non-sealed and Empty Packaging Trays by CO2 Tracer Gas Method |
| 08/14/2015 |
Software/
Informatics |
13-74 |
Complete |
IEEE |
Std 11073-10424-2014 |
Health informatics - Personal health device communication, Part 10424: Device Specialization - Sleep Apnoea Breathing Therapy Equipment (SABTE) |
| 12/23/2016 |
Anesthesiology |
1-119 |
Complete |
ISO |
14408 Third edition 2016-02-15 |
Tracheal tubes designed for laser surgery - Requirements for marking and accompanying information |
| 01/30/2014 |
Materials |
8-157 |
Complete |
ISO |
9583 First edition 1993-10-15 |
Implants for surgery -- Non-destructive testing -- Liquid penetrant inspection of metallic surgical implants |
| 12/18/2023 |
Sterility |
14-591 |
Complete |
ISO |
14644-10 Second edition 2022-05 |
Cleanrooms and associated controlled environments - Part 10: Assessment of surface cleanliness for chemical contamination |
| 07/15/2019 |
Sterility |
14-529 |
Complete |
ISO |
11135 Second edition 2014-07-15 |
Sterilization of health-care products - Ethylene oxide - Requirements for the development, validation and routine control of a sterilization process for medical devices [Including: Amendment 1 (2018)] |
| ANSI AAMI ISO |
11135:2014/A1:2018 |
Sterilization of health-care products - Ethylene oxide - Requirements for the development, validation and routine control of a sterilization process for medical devices - Amendment 1: Revision of Annex E, Single batch release |
| 07/06/2020 |
Orthopedic |
11-363 |
Complete |
ASTM |
F897-19 |
Standard Test Method for Measuring Fretting Corrosion of Osteosynthesis Plates and Screws |
| 12/18/2023 |
Anesthesiology |
1-164 |
Complete |
ISO |
5361 Fourth edition 2023-01 |
Anaesthetic and respiratory equipment - Tracheal tubes and connectors |
| 12/23/2016 |
Anesthesiology |
1-118 |
Complete |
ISO |
5361 Third edition 2016-09-01 |
Anaesthetic and respiratory equipment - Tracheal tubes and connectors |
| 05/29/2023 |
General Plastic Surgery/
General Hospital |
6-490 |
Complete |
ISO |
10555-6 First edition 2015-04-15 [Including AMD1:2019] |
Intravascular catheters - Sterile and single-use catheters - Part 6: Subcutaneous implanted ports [Including AMENDMENT 1 (2019)] |
| 05/29/2023 |
General Plastic Surgery/
General Hospital |
6-495 |
Complete |
ISO |
20698 First Edition 2018-07 |
Catheter systems for neuraxial application - Sterile and single-use catheters and accessories |
| 09/17/2018 |
Materials |
8-472 |
Complete |
ASTM |
F2847-17 |
Standard Practice for Reporting and Assessment of Residues on Single-Use Implants and Single-Use Sterile Instruments |
| 09/17/2018 |
Materials |
8-474 |
Complete |
ASTM |
F2886-17 |
Standard Specification for Metal Injection Molded Cobalt-28Chromium-6Molybdenum Components for Surgical Implant Applications |
| 09/17/2018 |
InVitro Diagnostics |
7-275 |
Complete |
CLSI |
EP07 3rd Edition |
Interference Testing in Clinical Chemistry. |
| 12/20/2021 |
Cardiovascular |
3-177 |
Complete |
ASTM |
F2606-08 (Reapproved 2021) |
Standard Guide for Three-Point Bending of Balloon-Expandable Vascular Stents and Stent Systems |
| 12/20/2021 |
Nanotechnology |
18-19 |
Complete |
ISO |
19749 First edition 2021-07 |
Nanotechnologies - Measurements of particle size and shape distributions by scanning electron microscopy |
| 12/20/2021 |
Nanotechnology |
18-20 |
Complete |
ASTM |
E3275-21 |
Standard Guide for Visualization and Identification of Nanomaterials in Biological and Nonbiological Matrices Using Darkfield Microscopy/Hyperspectral Imaging (DFM/HSI) Analysis |
| 12/20/2021 |
Dental/
ENT |
4-285 |
Complete |
ANSI ADA |
Standard No. 37-1986 (R2020) |
Dental Abrasive Powders |
| 12/20/2021 |
Sterility |
14-570 |
Complete |
USP-NF |
M98830_02_01 |
<85> Bacterial Endotoxins Test |
| 07/06/2020 |
InVitro Diagnostics |
7-297 |
Complete |
ISO |
TS 20914 First edition 2019-07 |
Medical laboratories - Practical guidance for the estimation of measurement uncertainty |
| 04/04/2016 |
Materials |
8-413 |
Complete |
ASTM |
F2819-10 (Reapproved 2015) |
Standard Test Methods for Measurement of Straightness of Bar, Rod, Tubing and Wire to be used for Medical Devices |
| 06/27/2016 |
Materials |
8-426 |
Complete |
ASTM |
F3087-15 (2024) |
Standard Specification for Acrylic Molding Resins for Medical Implant Applications |
| 05/29/2023 |
Dental/
ENT |
4-299 |
Complete |
ISO |
3107 Fifth edition 2022-09 |
Dentistry - Zinc oxide-eugenol cements and non-eugenol zinc oxide cements |
| ANSI ADA |
Standard No. 30-2023 |
Dental - Zinc Oxide-eugenol Cements and Non-eugenol Zinc Oxide Cements |
| 05/29/2023 |
Dental/
ENT |
4-300 |
Complete |
ISO |
22674 Third edition 2022-08 |
Dentistry - Metallic materials for fixed and removable restorations and appliances |
| ANSI ADA |
Standard No. 134-2023 |
Dentistry - Metallic Materials for Fixed and Removable Restorations and Appliances |
| 12/19/2022 |
General I (QS/
RM) |
5-141 |
Complete |
ASME |
V&V 20-2009 (R2021) |
Standard for Verification and Validation in Computational Fluid Dynamics and Heat Transfer |
| 06/27/2016 |
Materials |
8-430 |
Complete |
ISO |
13356:2015 Third Edition 2015-09-15 |
Implants for surgery -- Ceramic materials based on yttria-stabilized tetragonal zirconia (Y-TZP) |
| 06/27/2016 |
Materials |
8-432 |
Complete |
ISO ASTM |
52921 First Edition 2013-06-01 |
Standard Terminology for Additive Manufacturing-Coordinate Systems and Test Methodologies. |
| 06/27/2016 |
Materials |
8-434 |
Complete |
ISO ASTM |
52900 First Edition 2015-12-15 |
Additive manufacturing -- General principles - Terminology |
| 09/21/2016 |
General Plastic Surgery/
General Hospital |
6-380 |
Complete |
ISO |
9626 Second edition 2016-08-01 |
Stainless steel needle tubing for the manufacture of medical devices - Requirements and test methods |
| 05/30/2022 |
Materials |
8-591 |
Complete |
ASTM |
F2229-21 |
Standard Specification for Wrought, Nitrogen Strengthened 23Manganese-21Chromium-1Molybdenum Low-Nickel Stainless Steel Alloy Bar and Wire for Surgical Implants (UNS S29108) |
| 12/20/2021 |
Orthopedic |
11-391 |
Complete |
ASTM |
F2722-21 |
Standard Practice for Evaluating Mobile Bearing Knee Tibial Baseplate Rotational Stops |
| 12/19/2022 |
Biocompatibility |
2-297 |
Complete |
ASTM |
F763-22 |
Standard Practice for Short-Term Intramuscular Screening of Implantable Medical Device Materials |
| 05/30/2022 |
Materials |
8-587 |
Complete |
ISO |
5832-3 Fifth Edition 2021-11 |
Implants for surgery - Metallic materials - Part 3: Wrought titanium 6-aluminium 4-vanadium alloy |
| 08/21/2017 |
Materials |
8-453 |
Complete |
ASTM |
F1295-16 |
Standard Specification for Wrought Titanium-6 Aluminum-7Niobium Alloy for Surgical Implant Applications (UNS R56700) |
| 06/07/2018 |
Tissue Engineering |
15-54 |
Complete |
ASTM |
F3207-17 |
Standard Guide for in vivo Evaluation of Rabbit Lumbar Intertransverse Process Spinal Fusion Model |
| 06/07/2018 |
Biocompatibility |
2-250 |
Complete |
ASTM |
F756-17 |
Standard Practice for Assessment of Hemolytic Properties of Materials |
| 05/26/2025 |
InVitro Diagnostics |
7-333 |
Complete |
CLSI |
AUTO04-A |
Laboratory Automation: Systems Operational Requirements, Characteristics, and Information Elements; Approved Standard |
| 05/26/2025 |
InVitro Diagnostics |
7-334 |
Complete |
CLSI |
AUTO05-A |
Laboratory Automation: Electromechanical Interfaces; Approved Standard |
| 05/26/2025 |
InVitro Diagnostics |
7-335 |
Complete |
CLSI |
POCT01-A2 |
Point-of-Care Connectivity - Second Edition |
| 05/26/2025 |
InVitro Diagnostics |
7-336 |
Complete |
CLSI |
LIS02-A2 |
Standard Specification for Transferring Information Between Clinical Instruments and Computer Systems; Approved Standard-Second Edition. |
| 05/26/2025 |
InVitro Diagnostics |
7-340 |
Complete |
CLSI |
LIS01-A2 |
Standard Specification for Low-Level Protocol to Transfer Messages Between Clinical Laboratory Instruments and Computer Systems - Second Edition. |
| 12/22/2025 |
Radiology |
12-385 |
Complete |
NEMA |
PS 3.1 - 3.20 2025d |
Digital Imaging and Communications in Medicine (DICOM) Set |
| 01/27/2015 |
Sterility |
14-390 |
Complete |
ISO |
14644-10 First edition 2013-03-01 |
Cleanrooms and associated controlled environments - Part 10: Classification of surface cleanliness by chemical concentration |
| 12/18/2023 |
Sterility |
14-592 |
Complete |
ISO |
13408-1 Third edition 2023-08 |
Aseptic processing of health care products - Part 1: General requirements |
| 08/06/2013 |
Software/
Informatics |
13-57 |
Complete |
ISO IEEE |
11073-10407 First edition 2010-05-01 |
Health informatics - Personal health device communication - Part 10407: Device Specialization - Blood pressure monitor |
| IEEE |
Std 11073-10407-2008 |
Health informatics - Personal health device communication - Part 10407: Device Specialization - Blood pressure monitor |
| 05/29/2023 |
ObGyn/
Gastroenterology/
Urology |
9-145 |
Complete |
ASTM |
D7661-18 |
Standard Test Method for Determining Compatibility of Personal Lubricants with Natural Rubber Latex Condoms |
| 09/17/2018 |
ObGyn/
Gastroenterology/
Urology |
9-120 |
Complete |
ASTM |
D3492-16 |
Standard Specification for Rubber Contraceptives (Male Condoms) |
| 09/17/2018 |
Physical Medicine |
16-202 |
Complete |
ISO |
7176-2 Third edition 2017-10 |
Wheelchairs - Part 2:Determination of dynamic stability of electrically powered wheelchairs |
| 09/17/2018 |
Cardiovascular |
3-156 |
Complete |
ISO |
14708-1 Second edition 2014-08-15 |
Implants for surgery -- Active implantable medical devices -- Part 1: General requirements for safety, marking and for information to be provided by the manufacturer |
| ANSI AAMI ISO |
14708-1:2014 |
Implants for surgery - Active implantable medical devices - Part 1: General requirements for safety, marking and for information to be provided by the manufacturer |
| 12/22/2025 |
Anesthesiology |
1-200 |
Complete |
ISO |
7376-2 First edition 2025-09 |
Anaesthetic and respiratory equipment - Part 2: Video laryngoscopes |
| 08/14/2015 |
Ophthalmic |
10-98 |
Complete |
ISO |
11979-2 Second edition 2014-08-15 |
Ophthalmic implants - Intraocular lenses - Part 2: Optical properties and test methods |
| 05/26/2025 |
Radiology |
12-368 |
Complete |
ISO |
13696 Second edition 2022-06 |
Optics and photonics - Test methods for radiation scattered by optical components |
| 10/04/2004 |
Radiology |
12-116 |
Complete |
ISO |
13696:2002 |
Optics and optical instruments -- Test methods for radiation scattered by optical components |
| 05/26/2025 |
Radiology |
12-367 |
Complete |
ISO |
13695 Second edition 2024-11 |
Optics and photonics - Lasers and laser-related equipment - Test methods for the spectral characteristics of lasers |
| 12/20/2021 |
General II (ES/
EMC) |
19-44 |
Complete |
IEEE ANSI |
C63.24-2021 |
American National Standard - Recommended Practice for In Situ RF Immunity Evaluation of Electronic Devices and Systems |
| 12/19/2022 |
Software/
Informatics |
13-122 |
Complete |
IEC |
81001-5-1 Edition 1.0 2021-12 |
Health software and health IT systems safety, effectiveness and security - Part 5-1: Security - Activities in the product life cycle
|
| 12/19/2022 |
Software/
Informatics |
13-123 |
Complete |
ANSI NEMA |
HN 1-2019 |
American National Standard Manufacturer Disclosure Statement for Medical Device Security |
| 12/19/2022 |
Software/
Informatics |
13-124 |
Complete |
AAMI |
CR34971:2022 |
Guidance on the Application of ISO 14971 to Artificial Intelligence and Machine Learning |
| 06/07/2021 |
ObGyn/
Gastroenterology/
Urology |
9-131 |
Complete |
ISO |
8600-5 Second Edition 2020-10 |
Optics and photonics - Medical endoscopes and endotherapy devices - Part 5: Determination of optical resolution of rigid endoscopes with optics |
| 12/21/2020 |
Sterility |
14-551 |
Complete |
ISO |
14160 Third edition 2020-09 |
Sterilization of health care products - Liquid chemical sterilizing agents for single-use medical devices utilizing animal tissues and their derivatives - Requirements for characterization, development, validation and routine control of a sterilization process for medical devices |
| 01/14/2019 |
Dental/
ENT |
4-252 |
Complete |
ISO |
10650 Second edition 2018-08 |
Dentistry - Powered polymerization activators |
| ANSI ADA |
Standard No. 48-2020 |
Curing Lights (Powered Polymerization Activators) |
| 05/26/2025 |
Software/
Informatics |
13-145 |
Complete |
IEEE |
Std 11073-10419:2023 |
Health informatics - Device Interoperability Part 10419: Personal health device communication - Device Specialization - Insulin Pump |
| 05/26/2025 |
Software/
Informatics |
13-142 |
Complete |
FIRST |
CVSS v3.1 |
Common Vulnerability Scoring System version 3.1 |
| 12/22/2025 |
Radiology |
12-384 |
Complete |
ICDM |
IDMS Version 1.3 May 31 2025 |
Information Display Measurements Standard |
| 03/16/2012 |
Anesthesiology |
1-73 |
Complete |
ISO |
10651-4 First edition 2002-03-01 |
Lung ventilators - Part 4: Particular requirements for operator powered resuscitators |
| 12/18/2023 |
Orthopedic |
11-408 |
Complete |
ASTM |
F2777-23 |
Standard Test Method for Evaluating Knee Bearing (Tibial Insert) Endurance and Deformation Under High Flexion |
| 01/14/2019 |
Orthopedic |
11-346 |
Complete |
ASTM |
F2706-18 |
Standard Test Methods for Occipital-Cervical and Occipital-Cervical-Thoracic Spinal Implant Constructs in a Vertebrectomy Model |
| 12/04/2017 |
Software/
Informatics |
13-102 |
Complete |
IEC |
TR 80001-2-8 Edition 1.0 2016-05 |
Application of risk management for IT-networks incorporating medical devices - Part 2-8: Application guidance - Guidance on standards for establishing the security capabilities identified in IEC TR 80001-2-2 |
| 12/23/2024 |
Dental/
ENT |
4-334 |
Complete |
ISO |
11143 Second edition 2008-07 |
Dentistry - Amalgam separators |
| ANSI ADA |
Standard No. 108-2009, Addendum (R2022) |
Amalgam Separators |
| 04/04/2016 |
Software/
Informatics |
13-81 |
Complete |
ISO IEEE |
11073-10419 First edition 2016-06-15 |
Health informatics - Personal health device communication - Part 10419: Device specialization - Insulin pump |
| IEEE |
Std 11073-10419:2015 |
Health informatics - Personal health device communication - Part 10419: Device Specialization - Insulin Pump |
| 08/06/2013 |
Software/
Informatics |
13-56 |
Complete |
ISO IEEE |
11073-10406 First edition 2012-12-01 |
Health informatics - Personal health device communication - Part 10406: Device specialization - Basic electrocardiograph (ECG) (1- to 3-lead ECG) |
| IEEE |
Std 11073-10406-2011 |
Health informatics - Personal health device communication Part 10406: Device specialization - Basic electrocardiograph (ECG) (1- to 3-lead ECG) |
| 12/20/2021 |
Orthopedic |
11-388 |
Complete |
ASTM |
F1717-21 |
Standard Test Methods for Spinal Implant Constructs in a Vertebrectomy Model |
| 12/20/2021 |
Sterility |
14-564 |
Complete |
USP-NF |
M98910_01_01 |
<161> Medical Devices-Bacterial Endotoxin and Pyrogen Tests |
| 12/20/2021 |
Sterility |
14-565 |
Complete |
USP-NF |
M98802_01_01 |
<62> Microbiological Examination of Nonsterile Products: Tests for Specified Microorganisms |
| 12/20/2021 |
Sterility |
14-566 |
Complete |
USP-NF |
M98795_02_01 |
<55> Biological Indicators -- Resistance Performance Tests |
| 12/20/2021 |
Sterility |
14-567 |
Complete |
USP-NF |
M7414_01_01 |
<1229.5> Biological Indicators for Sterilization |
| 12/20/2021 |
Sterility |
14-568 |
Complete |
USP-NF |
M98800_01_01 |
<61> Microbiological Examination of Nonsterile Products: Microbial Enumeration Tests |
| 12/20/2021 |
Sterility |
14-569 |
Complete |
USP-NF |
M98810_01_01 |
<71> Sterility Tests |
| 08/14/2015 |
General Plastic Surgery/
General Hospital |
6-200 |
Complete |
ASTM |
E1061-01(2022) |
Standard Specification for Direct-Reading Liquid Crystal Forehead Thermometers |
| 08/21/2017 |
Dental/
ENT |
4-239 |
Complete |
ANSI AAMI |
CI86:2017/(R)2025 |
Cochlear implant systems: Requirements for safety, functional verification, labeling and reliability reporting |
| 07/09/2014 |
Anesthesiology |
1-100 |
Complete |
CGA |
V-1:2013 |
Standard for Compressed Gas Cylinder Valve Outlet and Inlet Connection |
| 05/26/2025 |
Neurology |
17-20 |
Complete |
IEC |
60601-2-40 Third edition 2024-12 |
Medical electrical equipment - Part 2-40: Particular requirements for the basic safety and essential performance of electromyographs and evoked response equipment |
| 12/18/2023 |
Anesthesiology |
1-166 |
Complete |
ISO |
11195 Second edition 2018-01 |
Gas mixers for medical use - Stand-alone gas mixers |
| 12/18/2023 |
Sterility |
14-589 |
Complete |
ISO |
14644-4 Second edition 2022-11 |
Cleanrooms and associated controlled environments - Part 4: Design, construction and start-up |
| 01/14/2019 |
InVitro Diagnostics |
7-286 |
Complete |
CLSI |
M11 9th Edition |
Methods for Antimicrobial Susceptibility Testing of Anaerobic Bacteria; Approved Standard-Eighth Edition. |
| 01/14/2019 |
Materials |
8-489 |
Complete |
ASTM |
F3302-18 |
Standard for Additive Manufacturing - Finished Part Properties - Standard Specification for Titanium Alloys via Powder Bed Fusion |
| 01/14/2019 |
ObGyn/
Gastroenterology/
Urology |
9-68 |
Complete |
ISO |
23409 First edition 2011-02-15 |
Male Condoms - Requirements and test methods for condoms made from synthetic materials |
| 01/14/2019 |
ObGyn/
Gastroenterology/
Urology |
9-111 |
Complete |
ISO |
4074 Third edition 2015-10-15 |
Natural latex rubber condoms - Requirements and test methods |
| 12/18/2023 |
Sterility |
14-590 |
Complete |
ISO |
14644-8 Third edition 2022-06 |
Cleanrooms and associated controlled environments - Part 8: Assessment of air cleanliness by chemical concentration (ACC) |
| 01/27/2015 |
Sterility |
14-379 |
Complete |
ISO |
14644-8 Second edition 2013-02-15 |
Cleanrooms and associated controlled environments - Part 8: Classification of air cleanliness by chemical concentration (ACC) |
| 09/17/2018 |
Tissue Engineering |
15-55 |
Complete |
ASTM |
F3259-17 |
Standard Guide for Micro-computed Tomography of Tissue Engineered Scaffolds |
| 05/29/2024 |
General Plastic Surgery/
General Hospital |
6-501 |
Complete |
ISO |
15747 Third edition 2018-09 |
Plastic containers for intravenous injections |
| 05/29/2024 |
General Plastic Surgery/
General Hospital |
6-500 |
Complete |
IEC |
63045 Edition 1.0 2020-05 |
Ultrasonics - Non-focusing short pressure pulse sources including ballistic pressure pulse sources - Characteristics of fields |
| 05/26/2025 |
Sterility |
14-611 |
Complete |
ISO |
11137-1 Second edition 2025-04 |
Sterilization of health care products - Radiation - Part 1: Requirements for the development, validation and routine control of a sterilization process for medical devices |
| 12/20/2021 |
Materials |
8-572 |
Complete |
ASTM |
F2565-21 |
Standard Guide for Extensively Irradiation-Crosslinked Ultra-High Molecular Weight Polyethylene Fabricated Forms for Surgical Implant Applications |
| 05/30/2022 |
Radiology |
12-343 |
Complete |
IEC |
62127-1 Edition 2.0 2022-03 |
Ultrasonics - Hydrophones - Part 1: Measurement and characterization of medical ultrasonic fields |
| 04/04/2016 |
Sterility |
14-337 |
Complete |
ISO |
14937 Second edition 2009-10-15 |
Sterilization of health care products - General requirements for characterization of a sterilizing agent and the development, validation and routine control of a sterilization process for medical devices |
| ANSI AAMI ISO |
14937:2009/(R)2013 |
Sterilization of health care products - General requirements for characterization of a sterilizing agent and the development, validation, and routine control of a sterilization process for medical devices |
| 09/09/2008 |
Sterility |
14-191 |
Complete |
ISO |
13408-4 First edition 2005-11-01 |
Aseptic processing of health care products - Part 4: Clean-in-place technologies |
| ANSI AAMI ISO |
13408-4:2005/(R)2014 |
Aseptic processing of health care products - Part 4: Clean-in-place technologies |
| 09/17/2018 |
InVitro Diagnostics |
7-276 |
Complete |
CLSI |
M38 3rd Edition |
Reference Method for Broth Dilution Antifungal Susceptibility Testing of Filamentous Fungi |
| 09/17/2018 |
Orthopedic |
11-337 |
Complete |
ISO |
16087 First edition 2013-10-01 |
Implants for surgery - Roentgen stereophotogrammetric analysis for the assessment of migration of orthopaedic implants |
| 12/18/2023 |
Materials |
8-610 |
Complete |
ASTM |
F601-23 |
Standard Practice for Fluorescent Penetrant Inspection of Metallic Surgical Implants |
| 07/09/2014 |
InVitro Diagnostics |
7-213 |
Complete |
CLSI |
GP44-A4 (Formerly H18-A4) |
Procedures for the Handling and Processing of Blood Specimens for Common Laboratory Tests; Approved Guideline-Fourth Edition |
| 06/27/2016 |
General Plastic Surgery/
General Hospital |
6-363 |
Complete |
ISO |
11810 Second edition 2015-12-15 |
Lasers and laser-related equipment - Test method and classification for the laser-resistance of surgical drapes and/or patient-protective covers - Primary ignition, penetration, flame spread and secondary ignition |
| 09/17/2018 |
Cardiovascular |
3-110 |
Complete |
AAMI |
TIR41:2011/(R)2025 |
Active implantable medical devices - Guidance for designation of left ventricle and implantable cardioverter defibrillator lead connectors and pulse generator connector cavities for implantable pacemakers and implantable cardioverter defibrillators |
| 12/19/2022 |
Cardiovascular |
3-183 |
Complete |
ISO |
11658 First edition 2012-05-15 |
Cardiovascular implants and extracorporeal systems - Blood/tissue contact surface modifications for extracorporeal perfusion systems |
| ANSI AAMI ISO |
11658: 2012 |
Cardiovascular implants and extracorporeal systems - Blood/tissue contact surface modifications for extracorporeal perfusion systems |
| 12/19/2022 |
Orthopedic |
11-394 |
Complete |
ASTM |
F1820-22 |
Standard Test Method for Determining the Forces for Disassembly of Modular Acetabular Devices |
| 08/14/2015 |
General Plastic Surgery/
General Hospital |
6-185 |
Complete |
ASTM |
F881-94 (Reapproved 2022) |
Standard Specification for Silicone Elastomer Facial Implants |
| 09/09/2008 |
Sterility |
14-240 |
Complete |
ISO |
13408-5 First edition 2006-11-15 |
Aseptic processing of health care products - Part 5: Sterilization-in-place |
| ANSI AAMI ISO |
13408-5:2006/(R)2015 |
Aseptic processing of health care products - Part 5: Sterilization in place |
| 08/06/2013 |
Sterility |
14-388 |
Complete |
ISO |
13408-7 First edition 2012-08-01 |
Aseptic processing of health care products - Part 7: Alternate processes for medical devices and combination products |
| ANSI AAMI ISO |
13408-7:2012 (R2018) |
Aseptic processing of health care products - Part 7: Alternate processes for medical devices and combination products |
| 06/07/2018 |
General Plastic Surgery/
General Hospital |
6-404 |
Complete |
ISO |
7886-1 Second edition 2017-05 |
Sterile hypodermic syringes for single use - Part 1: Syringes for manual use |
| 09/17/2018 |
Sterility |
14-275 |
Complete |
ANSI AAMI |
ST41:2008/(R)2018 |
Ethylene oxide sterilization in health care facilities: Safety and effectiveness |
| 12/20/2021 |
Orthopedic |
11-393 |
Complete |
ASTM |
F2724-21 |
Standard Test Method for Evaluating Mobile Bearing Knee Dislocation |
| 03/31/2006 |
Radiology |
12-138 |
Complete |
ISO |
5799 Second edition 1991-08-01 |
Photography -- Direct-exposing medical and dental radiographic film/process systems -- Determination of ISO speed and ISO average gradient |
| 01/30/2014 |
General I (QS/
RM) |
5-47 |
Complete |
ISO |
10012 First edition 2003-01-15 |
Measurement management systems - Requirements for measurement processes and measuring equipment |
| 11/08/2005 |
InVitro Diagnostics |
7-113 |
Complete |
CLSI |
I/LA23-A (Replaces I/LA23-P) |
Assessing the Quality of Immunoassay Systems: Radioimmunoassays, and Enzyme, Fluorescence, and Luminescence Immunoassays; Approved Guideline |
| 12/19/2007 |
Ophthalmic |
10-39 |
Complete |
ISO |
12865 Second edition 2006-07-01 |
Ophthalmic instruments - Retinoscopes |
| 01/15/2013 |
Software/
Informatics |
13-35 |
Complete |
ANSI AAMI |
SW87:2012 |
Application of quality management system concepts to medical device data systems |
| 07/09/2014 |
Sterility |
14-437 |
Complete |
ISO ASTM |
52701 First edition 2013-11-15 (R2020) |
Guide for performance characterization of dosimeters and dosimetry systems for use in radiation processing |
| 01/15/2013 |
Sterility |
14-213 |
Complete |
AOAC |
6.2.03:2006 |
Official Method 991.48, Testing Disinfectants Against Staphylococcus aureus, Hard Surface Carrier Test Method |
| 01/15/2013 |
Sterility |
14-215 |
Complete |
AOAC |
6.2.05:2006 |
Official Method 991.49, Testing Disinfectants Against Pseudomonas aeruginosa,Hard Surface Carrier Test Method |
| 01/15/2013 |
Sterility |
14-217 |
Complete |
AOAC |
6.3.02:2006 |
Official Method 955.17, Fungicidal Activity of Disinfectants Using Trichophyton mentagrophytes |
| 03/16/2012 |
Anesthesiology |
1-72 |
Complete |
ISO |
10651-5 First edition 2006-02-01 |
Lung ventilators for medical use - Particular requirements for basic safety and essential performance - Part 5: Gas-powered emergency resuscitators |
| 08/06/2013 |
Ophthalmic |
10-78 |
Complete |
ISO |
11979-3 Third edition 2012-12-01 |
Ophthalmic implants - Intraocular lenses - Part 3: Mechanical properties and test methods |
| 12/23/2019 |
General II (ES/
EMC) |
19-13 |
Complete |
IEC |
62133 Edition 2.0 2012-12 |
Secondary cells and batteries containing alkaline or other non-acid electrolytes - Safety requirements for portable sealed secondary cells, and for batteries made from them, for use in portable applications [Including: Corrigendum 1 (2013)] |
| 04/04/2016 |
Materials |
8-401 |
Complete |
ASTM |
F2118-14 (Reapproved 2020) |
Standard Test Method for Constant Amplitude of Force Controlled Fatigue Testing of Acrylic Bone Cement Materials |
| 12/23/2016 |
Materials |
8-368 |
Complete |
ASTM |
F2625-10 (Reapproved 2016) |
Standard Test Method for Measurement of Enthalpy of Fusion, Percent Crystallinity, and Melting Point of Ultra-High-Molecular Weight Polyethylene by Means of Differential Scanning Calorimetry |
| 01/30/2014 |
Sterility |
14-395 |
Complete |
ISO |
14698-2 First edition 2003-09-15 |
Cleanrooms and Associated Controlled Environments - Biocontamination Control - Part 2: Evaluation and Interpretation of Biocontamination Data [Including: Technical Corrigendum 1 (2004)] |
| 01/30/2014 |
Sterility |
14-397 |
Complete |
AOAC |
6.2.04:2013 |
Official Method 955.15, Testing Disinfectants Against Staphylococcus aureus,Use-Dilution Method |
| 01/30/2014 |
Sterility |
14-398 |
Complete |
AOAC |
6.3.05:2013 |
Official Method 966.04, Sporicidal Activity of Disinfectants Method I |
| 01/30/2014 |
Sterility |
14-399 |
Complete |
AOAC |
6.3.06:2012 |
Official Method 965.12 Tuberculocidal Activity of Disinfectants |
| 01/30/2014 |
Sterility |
14-400 |
Complete |
ASTM |
F2203-13 (Reapproved 2022) |
Standard Test Method for Linear Measurement Using Precision Steel Rule |
| 03/14/2011 |
Radiology |
12-221 |
Complete |
IEC |
61223-3-4 First edition 2000-03 |
Evaluation and routine testing in medical imaging departments - Part 3-4: Acceptance tests - Imaging performance of dental X-ray |
| 03/16/2012 |
Radiology |
12-143 |
Complete |
ISO |
15367-2 First edition 2005-03-15 |
Lasers and laser-related equipment - Test methods for determination of the shape of a laser beam wavefront - Part 2: Shack-Hartman sensors |
| 03/16/2012 |
Radiology |
12-248 |
Complete |
ISO |
21254-3 First edition 2011-07-15 |
Lasers and laser-related equipment - Test methods for laser-induced damage threshold - Part 3: Assurance of laser power (energy) handling capabilities |
| 03/16/2012 |
Radiology |
12-174 |
Complete |
ISO |
13697 First edition 2006-05-15 |
Optics and photonics -- Lasers and laser-related equipment - Test methods for specular reflectance and regular transmittance of optical laser components |
| 08/20/2012 |
Cardiovascular |
3-104 |
Complete |
ASTM |
F2914-12 (Reapproved 2018) |
Standard Guide for Identification of Shelf-life Test Attributes for Endovascular Devices |
| 08/20/2012 |
General Plastic Surgery/
General Hospital |
6-278 |
Complete |
ISO |
11040-5 Third edition 2012-02-15 |
Prefilled syringes - Part 5: Plunger stoppers for injectables |
| 06/07/2018 |
ObGyn/
Gastroenterology/
Urology |
9-115 |
Complete |
ISO |
29943-1 First edition 2017-07. |
Condoms -- Guidance on clinical studies -- Part 1: Male condoms, clinical function studies based on self-reports |
| 06/07/2018 |
Anesthesiology |
1-129 |
Complete |
ISO |
5359 Fourth edition 2014-10-01 |
Anaesthetic and respiratory equipment - Low-pressure hose assemblies for use with medical gases [Including AMENDMENT 1 (2017)] |
| 06/07/2018 |
Anesthesiology |
1-130 |
Complete |
ISO |
18082 First edition 2014-06-15 |
Anaesthetic and respiratory equipment - Dimensions of noninterchangeable screw-threaded (NIST) low-pressure connectors for medical gases [Including AMENDMENT 1 (2017)] |
| 06/27/2016 |
Radiology |
12-294 |
Complete |
IEC |
60601-2-45 Edition 3.1 2015 |
Medical electrical equipment - Part 2-45: Particular requirements for the basic safety and essential performance of mammographic X-ray equipment and mammographic stereotactic devices |
| 09/17/2018 |
InVitro Diagnostics |
7-283 |
Complete |
CLSI |
POCT04 3rd Edition |
Essential Tools for Implementation and Management of a Point-of-Care Testing Program |
| 08/21/2017 |
Orthopedic |
11-175 |
Complete |
ASTM |
F1582-98 (Reapproved 2016) |
Standard Terminology Relating to Spinal Implants |
| 08/21/2017 |
Orthopedic |
11-309 |
Complete |
ASTM |
F116-12 (Reapproved 2016) |
Standard Specification for Medical Screwdriver Bits |
| 01/30/2014 |
Radiology |
12-59 |
Complete |
IEC |
61168:1993 |
Radiotherapy simulators - Functional performance characteristics |
| 01/30/2014 |
Radiology |
12-264 |
Complete |
NEMA |
MS 11-2010 |
Determination of Gradient-Induced Electric Fields in Diagnostic Magnetic Resonance Imaging |
| 06/07/2018 |
Radiology |
12-312 |
Complete |
IEC |
61391-1 Edition 1.1 2017-07 CONSOLIDATED VERSION |
Ultrasonics - Pulse-echo scanners - Part 1: Techniques for calibrating spatial measurement systems and measurement of system point-spread function response |
| 06/07/2018 |
Radiology |
12-313 |
Complete |
IEC |
TS 62462 Edition 2.0 2017-07 |
Ultrasonics - Output test - Guide for the maintenance of ultrasound physiotherapy systems |
| 09/17/2018 |
Sterility |
14-512 |
Complete |
ISO |
13408-2 Second edition 2018-01 |
Aseptic processing of health care products - Part 2: Sterilizing filtration. |
| ANSI AAMI ISO |
13408-2:2018 |
Aseptic processing of health care products - Part 2:Sterilizing filtration |
| 09/17/2018 |
Cardiovascular |
3-154 |
Complete |
ASTM |
F3211-17 |
Standard Guide for Fatigue-to-Fracture (FtF) Methodology for Cardiovascular Medical Devices |
![Sort by Date [Old to new]](/scripts/cdrh/images/arrow_up-black.GIF){kind=icon}
![Sort by Date [New to old]](/scripts/cdrh/images/arrow_down-black.GIF){kind=icon}
