|
|
|
Date of
Entry
|
Specialty Task
Group Area
|
Recognition
Number
|
Extent of
Recognition
|
Standards
Developing
Organization
|
Standard Designation
Number and Date
|
Standard Title
(click for recognition information)
|
| 07/15/2019 |
InVitro Diagnostics |
7-287 |
Complete |
CLSI |
M44-S3 (2018) |
Zone Diameter Interpretive Standards, Corresponding Minimal Inhibitory Concentration (MIC) Interpretive Breakpoints, and Quality Control Limits for Antifungal Disk Diffusion Susceptibility Testing of Yeasts; Third Informational Supplement |
| 01/27/2015 |
Radiology |
12-286 |
Complete |
NEMA |
XR 27 Amendment 1-2013 |
X-ray equipment for interventional procedures - User Quality Control Mode |
| 12/23/2016 |
Physical Medicine |
16-199 |
Complete |
ISO |
7176-28 First edition 2012-10-1 |
Wheelchairs Part 28: Requirements and test methods for stairclimbing devices |
| 06/07/2018 |
Physical Medicine |
16-201 |
Complete |
ISO |
7176-19 Second Edition 2008-07-15 |
Wheelchairs Part 19: Wheeled mobility devices for use as seats in motor vehicles [Including AMENDMENT 1 (2015)] |
| 07/15/2019 |
Physical Medicine |
16-206 |
Complete |
ISO |
7176 - 30 First edition 2018-12 |
Wheelchairs --Part 30: Wheelchairs for changing occupant posture --Test methods and requirements |
| 01/30/2014 |
Physical Medicine |
16-167 |
Complete |
ISO |
7176-9 Third edition 2009-11-15 |
Wheelchairs - Part 9: Climatic tests for electric wheelchairs |
| 04/04/2016 |
Physical Medicine |
16-197 |
Complete |
ISO |
7176-8 Second editon 2014-12-15 |
Wheelchairs - Part 8: Requirements and test methods for static, impact and fatigue strengths |
| 04/04/2016 |
Physical Medicine |
16-196 |
Complete |
ISO |
7176-7 First Edition 1998-05-15 |
Wheelchairs - Part 7: Measurement of seating and wheel dimensions |
| 01/14/2019 |
Physical Medicine |
16-204 |
Complete |
ISO |
7176-6 Third edition 2018-06 |
Wheelchairs - Part 6: Determination of maximum speed of electrically powered wheelchairs |
| 01/30/2014 |
Physical Medicine |
16-163 |
Complete |
ISO |
7176-5 Second edition 2008-06-01 |
Wheelchairs - Part 5: Determination of overall dimensions, mass and manoeuvring space |
| 01/30/2014 |
Physical Medicine |
16-162 |
Complete |
ISO |
7176-4 Third edition 2008-10-01 |
Wheelchairs - Part 4: Energy consumption of electric wheelchairs and scooters for determination of theoretical distance range |
| 08/06/2013 |
Physical Medicine |
16-192 |
Complete |
ISO |
7176-3 Third edition 2012-12-15 |
Wheelchairs - Part 3: Determination of effectiveness of brakes |
| 05/29/2023 |
Physical Medicine |
16-235 |
Complete |
ISO |
7176-25 Second Edition 2022 |
Wheelchairs - Part 25: Lead-acid batteries and chargers for powered wheelchairs - Requirements and test methods |
| 08/14/2015 |
Physical Medicine |
16-194 |
Complete |
ISO |
7176-25 First edition 2013-07-15 |
Wheelchairs - Part 25: Batteries and chargers for powered wheelchairs |
| 04/04/2016 |
Physical Medicine |
16-198 |
Complete |
ISO |
7176-22 Second edition 2014-09-01 |
Wheelchairs - Part 22: Set-up procedures |
| 05/30/2022 |
Physical Medicine |
16-166 |
Partial |
ISO |
7176-21 Second edition 2009-04-01 |
Wheelchairs - Part 21: Requirements and test methods for electromagnetic compatibility of electrically powered wheelchairs and scooters, and battery chargers |
| 09/17/2018 |
Physical Medicine |
16-202 |
Complete |
ISO |
7176-2 Third edition 2017-10 |
Wheelchairs - Part 2:Determination of dynamic stability of electrically powered wheelchairs |
| 05/29/2023 |
Physical Medicine |
16-236 |
Complete |
ISO |
7176-19 Third Edition 2022 |
Wheelchairs - Part 19: Wheeled mobility devices for use as seats in motor vehicles |
| 01/30/2014 |
Physical Medicine |
16-27 |
Complete |
ISO |
7176-15 First edition 1996-11-15 |
Wheelchairs - Part 15: Requirements for information disclosure, documentation and labeling |
| 01/30/2014 |
Physical Medicine |
16-165 |
Complete |
ISO |
7176-14 Second edition 2008-02-15 |
Wheelchairs - Part 14: Power and control systems for electrically powered wheelchairs and scooters - Requirements and test methods |
| 05/29/2023 |
Physical Medicine |
16-234 |
Complete |
ISO |
7176-14 Third Edition 2022 |
Wheelchairs - Part 14: Power and control systems for electrically powered wheelchairs and scooters - Requirements and test methods |
| 01/30/2014 |
Physical Medicine |
16-25 |
Complete |
ISO |
7176-13 First edition 1989-08-01 |
Wheelchairs - Part 13: Determination of coefficient of friction of test surfaces |
| 08/06/2013 |
Physical Medicine |
16-190 |
Complete |
ISO |
7176-11 Second edition 2012-12-01 |
Wheelchairs - Part 11: Test dummies |
| 01/30/2014 |
Physical Medicine |
16-164 |
Complete |
ISO |
7176-10 Second edition 2008-11-01 |
Wheelchairs - Part 10: Determination of obstacle-climbing ability of electrically powered wheelchairs |
| 04/04/2016 |
Physical Medicine |
16-195 |
Complete |
ISO |
7176-1 Third edition 2014-10-01 |
Wheelchairs - Part 1: Determination of static stability |
| 12/19/2022 |
Physical Medicine |
16-233 |
Complete |
ISO |
16840-10 Second edition 2021-06 Corrected version 2022-01 |
Wheelchair seating - Part 10: Resistance to ignition of postural support devices - Requirements and test method |
| 03/18/2009 |
InVitro Diagnostics |
7-180 |
Complete |
CLSI |
M34-A (Replaces M24-P) |
Western Blot Assay for Antibodies to Borrelia burgdorferi; Approved Guideline. |
| 09/17/2018 |
Orthopedic |
11-336 |
Complete |
ISO |
17853 Third edition 2011-03-01 |
Wear of implant materials - Polymer and metal wear particles - Isolation and characterization |
| 12/18/2023 |
Sterility |
14-597 |
Complete |
AAMI ANSI |
ST108:2023 |
Water for the processing of medical devices |
| 03/18/2009 |
InVitro Diagnostics |
7-185 |
Complete |
CLSI |
M41-A |
Viral Culture; Approved Guideline. |
| 12/23/2019 |
InVitro Diagnostics |
7-295 |
Complete |
CLSI |
M52, 1st ed. August 2015 (Reaffirmed: January 2020) |
Verification of Commercial Microbial Identification and Antimicrobial Susceptibility Testing Systems. |
| 07/15/2019 |
InVitro Diagnostics |
7-289 |
Partial |
CLSI |
MM17 2nd Edition |
Verification and Validation of Multiplex Nucleic Acid Assays |
| 01/30/2014 |
InVitro Diagnostics |
7-210 |
Partial |
CLSI |
H26-A2 |
Validation, Verification, and Quality Assurance of Automated Hematology Analyzers; Proposed Standard - Second Edition |
| 01/15/2013 |
Software/
Informatics |
13-33 |
Complete |
AAMI |
TIR 36:2007 |
Validation of software for regulated processes |
| 12/18/2023 |
InVitro Diagnostics |
7-320 |
Partial |
CLSI |
H62 1st Edition |
Validation of Assays Performed by Flow Cytometry |
| 03/16/2012 |
InVitro Diagnostics |
7-225 |
Complete |
CLSI |
GP34-A (Replaces GP34-P) |
Validation and Verfication of Tubes for Venous and Capillary Blood Specimen Collection; Approved Guidance |
| 01/14/2019 |
InVitro Diagnostics |
7-139 |
Complete |
CLSI |
QMS24, 3rd Edition September 2016 Replaces GP27-A2 and GP29-A2 |
Using Proficiency Testing to Improve the Clinical Laboratory; Approved Guideline - Second Edition |
| 08/14/2015 |
InVitro Diagnostics |
7-253 |
Complete |
CLSI |
EP15-A3 (Reaffirmed: September 2019) |
User Verification of Precision and Estimation of Bias; Approved Guideline - Third Edition |
| 01/30/2014 |
InVitro Diagnostics |
7-152 |
Complete |
CLSI |
EP12-A2 |
User Protocol for Evaluation of Qualitative Test Performance; Approved Guideline - Second Edition. |
| 05/05/2010 |
InVitro Diagnostics |
7-207 |
Complete |
CLSI |
GP16-A3 (Replaces GP16-A2) |
Urinalysis; Approved Guideline - Third Edition |
| 07/09/2014 |
Radiology |
12-275 |
Complete |
IEC |
61161 Edition 3.0 2013-01 |
Ultrasonics -- Power measurement -- Radiation force balances and performance requirements |
| 07/09/2014 |
Radiology |
12-280 |
Complete |
IEC |
62555 Edition 1.0 2013-11 |
Ultrasonics -- Power measurement -- High intensity therapeutic ultrasound (HITU) transducers and systems |
| 08/14/2015 |
Radiology |
12-291 |
Complete |
IEC |
62127-2 Edition 1.2 2017-03 CONSOLIDATED VERSION |
Ultrasonics -- Hydrophones -- Part 2: Calibration for ultrasonic fields up to 40 MHz |
| 07/09/2014 |
Radiology |
12-279 |
Complete |
IEC |
62127-03 Edition 1.1 2013-05 |
Ultrasonics -- Hydrophones -- Part 3: Properties of hydrophones for ultrasonic fields up to 40 MHz |
| 05/27/2005 |
Radiology |
12-121 |
Complete |
IEC |
61847: 1998 |
Ultrasonics - Surgical systems - Measurement and declaration of the basic output characteristics Ed. 1.0 |
| 01/30/2014 |
Radiology |
12-228 |
Complete |
IEC |
61391-2 Edition 1.0 2010-01 |
Ultrasonics - Pulse-echo scanners - Part 2: Measurement of maximum depth of penetration and local dynamic range |
| 06/07/2018 |
Radiology |
12-312 |
Complete |
IEC |
61391-1 Edition 1.1 2017-07 CONSOLIDATED VERSION |
Ultrasonics - Pulse-echo scanners - Part 1: Techniques for calibrating spatial measurement systems and measurement of system point-spread function response |
| 09/09/2008 |
ObGyn/
Gastroenterology/
Urology |
9-7 |
Complete |
IEC |
61846 First edition 1998-04 |
Ultrasonics - Pressure pulse lithotripters - Characteristics of fields |
| 01/30/2014 |
Radiology |
12-266 |
Complete |
IEC |
61689 Edition 3.0 2013-02 |
Ultrasonics - Physiotherapy systems - Field specifications and methods of measurement in the frequency range 0.5 MHz to 5 MHz |
| 06/07/2018 |
Radiology |
12-313 |
Complete |
IEC |
TS 62462 Edition 2.0 2017-07 |
Ultrasonics - Output test - Guide for the maintenance of ultrasound physiotherapy systems |
| 05/30/2022 |
Radiology |
12-343 |
Complete |
IEC |
62127-1 Edition 2.0 2022-03 |
Ultrasonics - Hydrophones - Part 1: Measurement and characterization of medical ultrasonic fields |
| 06/07/2018 |
Radiology |
12-316 |
Complete |
IEC |
62359 Edition 2.1 2017-09 CONSOLIDATED VERSION |
Ultrasonics - Field characterization - Test methods for the determination of thermal and mechanical indices related to medical diagnostic ultrasonic fields |
| 07/09/2014 |
InVitro Diagnostics |
7-221 |
Complete |
CLSI |
GP39-A6 (Formerly H01-A6) |
Tubes and Additives for Venous Blood Specimen Collection; Approved Standard-Sixth Edition |
| 08/21/2017 |
General Plastic Surgery/
General Hospital |
6-384 |
Complete |
ISO |
1135-4 Sixth edition 2015-12-01 |
Transfusion equipment for medical use-Part 4: Transfusion sets for single use, gravity feed |
| 01/14/2019 |
Neurology |
17-14 |
Complete |
ANSI AAMI |
NS4:2013(R)2017 |
Transcutaneous Electrical Nerve Stimulators |
| 08/21/2017 |
Anesthesiology |
1-127 |
Complete |
ISO |
16628 First edition 2008-11-15 |
Tracheobronchial tubes-Sizing and marking |
| 12/23/2016 |
Anesthesiology |
1-119 |
Complete |
ISO |
14408 Third edition 2016-02-15 |
Tracheal tubes designed for laser surgery - Requirements for marking and accompanying information |
| 01/30/2014 |
Cardiovascular |
3-118 |
Complete |
ANSI AAMI |
EC57:2012 |
Testing and reporting performance results of cardiac rhythm and ST-segment measurement algorithms |
| 01/14/2019 |
Orthopedic |
11-347 |
Complete |
ASTM |
F2077-18 |
Test Methods for Intervertebral Body Fusion Devices |
| 08/21/2017 |
General II (ES/
EMC) |
19-22 |
Complete |
AAMI |
TIR69:2017/(R2020) |
Technical Information Report Risk management of radio-frequency wireless coexistence for medical devices and systems. |
| 01/30/2014 |
General I (QS/
RM) |
5-84 |
Complete |
AAMI |
TIR 49:2013/(R)2020 |
Technical Information Report Design of training and instructional materials for medical devices used in non-clinical environments |
| 09/17/2018 |
Cardiovascular |
3-110 |
Complete |
AAMI |
TIR 41:2011/(R)2017 |
Technical Information Report Active implantable medical devices - Guidance for designation of left ventricle and implantable cardioverter defibrillator lead connectors and pulse generator connector cavities for implantable pacemakers and implantable cardioverter defibrillators |
| 01/14/2019 |
Sterility |
14-518 |
Complete |
AAMI ANSI |
ST55:2016/(R)2023 |
Table-top steam sterilizers |
| 09/17/2018 |
Sterility |
14-294 |
Complete |
ANSI AAMI |
ST40:2004/(R)2018 |
Table-top dry heat (heated air) sterilization and sterility assurance in health care facilities |
| 08/06/2013 |
Software/
Informatics |
13-59 |
Complete |
ISO IEC IEEE |
15026-4 First edition 2021-10-01 |
Systems and software engineering - Systems and software assurance - Part 4: Assurance in the life cycle |
| 12/23/2016 |
Software/
Informatics |
13-87 |
Complete |
ISO IEC |
15026-2 First edition 2011-02-15 |
Systems and software engineering - Systems and software assurance - Part 2: Assurance case |
| 12/23/2016 |
Software/
Informatics |
13-86 |
Complete |
ISO IEC |
15026-1 First edition 2013-11-01 |
Systems and software engineering - Systems and software assurance - Part 1: Concepts and vocabulary |
| 08/14/2015 |
Software/
Informatics |
13-73 |
Partial |
IHTSDO |
SNOMED-CT RF2 Release 2015 |
Systematized Nomenclature of Medicine - Clinical Terms |
| 12/21/2020 |
InVitro Diagnostics |
7-302 |
Complete |
CLSI |
C34 4th Edition |
Sweat Testing: Specimen Collection and Quantitative Chloride Analysis |
| 07/15/2019 |
InVitro Diagnostics |
7-288 |
Complete |
CLSI |
M24 3rd Edition |
Susceptibility Testing of Mycobacteria, Nocardiae and other Aerobic Actinomycetes |
| 01/30/2014 |
Materials |
8-344 |
Complete |
ISO |
7153-1 Second edition 1991-04-01 |
Surgical instruments -- Metallic materials -- Part 1: Stainless steel [Including: Amendment 1 (1999)] |
| 12/18/2023 |
Dental/
ENT |
4-320 |
Complete |
ISO |
13402 First edition 1995-08-01 |
Surgical and dental hand instruments -- Determination of resistance against autoclaving, corrosion and thermal exposure |
| 01/27/2015 |
Nanotechnology |
18-3 |
Partial |
ISO |
TS 14101 First edition 2012-11-01 |
Surface characterization of gold nanoparticles for nanomaterial specific toxicity screening: FT-IR method |
| 09/17/2018 |
InVitro Diagnostics |
7-284 |
Complete |
CLSI |
EP37 1st Edition |
Supplemental Tables for Interference Testing in Clinical Chemistry |
| 07/06/2020 |
Radiology |
12-330 |
Complete |
NEMA |
Standards Publication XR 28-2018 |
Supplemental Requirements for User Information and System Function Related to Dose in CT |
| 12/21/2020 |
Anesthesiology |
1-150 |
Complete |
ISO |
8836 Fifth edition 2019-12 |
Suction catheters for use in the respiratory tract |
| 07/06/2020 |
Sterility |
14-540 |
Complete |
ISO |
11737-2 Third edition 2019-12 |
Sterilization of medical devices - Microbiological methods - Part 2: Tests of sterility performed in the definition, validation and maintenance of a sterilization process |
| ANSI AAMI ISO |
11737-2:2019 |
Sterilization of medical devices - Microbiological methods - Part 2: Tests of sterility performed in the definition, validation and maintenance of a sterilization process |
| 07/15/2019 |
Sterility |
14-529 |
Complete |
ISO |
11135 Second edition 2014-07-15 |
Sterilization of health-care products - Ethylene oxide - Requirements for the development, validation and routine control of a sterilization process for medical devices [Including: Amendment 1 (2018)] |
| ANSI AAMI ISO |
11135:2014/A1:2018 |
Sterilization of health-care products - Ethylene oxide - Requirements for the development, validation and routine control of a sterilization process for medical devices - Amendment 1: Revision of Annex E, Single batch release |
| 07/06/2020 |
Sterility |
14-543 |
Complete |
ISO |
11139 First edition 2018-08 |
Sterilization of health care products - Vocabulary of terms used in sterilization and related equipment and process standards |
| 12/21/2020 |
Sterility |
14-550 |
Complete |
ANSI AAMI |
ST67:2019 |
Sterilization of health care products - Requirements and guidance for selecting a sterility assurance level (SAL) for products labeled "sterile" |
| 12/19/2022 |
Sterility |
14-582 |
Complete |
AAMI ISO |
TIR11137-4:2022 |
Sterilization of health care products - Radiation - Part 4: Guidance on process control |
| ISO |
TS 11137-4 First edition 2020-06 |
Sterilization of health care products - Radiation - Part 4: Guidance on process control |
| 06/07/2018 |
Sterility |
14-510 |
Complete |
ISO |
11137-3 Second edition 2017-06 |
Sterilization of health care products - Radiation - Part 3: Guidance on dosimetric aspects of development, validation and routine control |
| ANSI AAMI ISO |
11137-3:2017/(R)2023 |
Sterilization of health care products - Radiation - Part 3: Guidance on dosimetric aspects of development, validation and routine control |
| 12/19/2022 |
Sterility |
14-580 |
Complete |
ISO |
11137-2 Third edition 2013-06 [Including AMD1:2022] |
Sterilization of health care products - Radiation - Part 2: Establishing the sterilization dose [Including Amendment 1 (2022)] |
| 07/15/2019 |
Sterility |
14-528 |
Complete |
ISO |
11137-1 First edition 2006-04-15 |
Sterilization of health care products - Radiation - Part 1: Requirements for development, validation and routine control of a sterilization process for medical devices [Including: Amendment 1 (2013) and Amendment 2 (2018)] |
| ANSI AAMI ISO |
11137-1:2006/(R)2015 |
Sterilization of health care products - Radiation - Part 1: Requirements for development, validation, and routine control of a sterilization process for medical devices [Including: Amendment 1 (2013) and Amendment 2 (2019)] |
| 04/04/2016 |
Sterility |
14-277 |
Complete |
ANSI AAMI ISO |
TIR 17665-2:2009 |
Sterilization of health care products - Moist heat - Part 2: Guidance on the application of ISO ANSI/AAMI/ISO 17665-1 |
| ISO |
TS 17665-2 First edition 2009-01-15 |
Sterilization of health care products - Moist heat - Part 2: Guidance on the application of ISO 17665-1 |
| 04/04/2016 |
Sterility |
14-333 |
Complete |
ISO |
17665-1 First edition 2006-08-15 |
Sterilization of health care products - Moist heat - Part 1: Requirements for the development, validation and routine control of a sterilization process for medical devices |
| ANSI AAMI ISO |
17665-1:2006/(R)2013 |
Sterilization of health care products -- Moist heat -- Part 1: Requirements for the development, validation, and routine control of a sterilization process for medical devices |
| 05/30/2022 |
Sterility |
14-577 |
Complete |
ISO |
11737-1 Third edition 2018-01 [Including AMD1:2021] |
Sterilization of health care products - Microbiological methods - Part 1: Determination of a population of microorganisms on product [Including Amendment 1 (2021)] |
| 05/29/2023 |
Sterility |
14-586 |
Complete |
ISO |
22441 First edition 2022-08 |
Sterilization of health care products - Low temperature vaporized hydrogen peroxide - Requirements for the development, validation and routine control of a sterilization process for medical devices |
| 12/21/2020 |
Sterility |
14-551 |
Complete |
ISO |
14160 Third edition 2020-09 |
Sterilization of health care products - Liquid chemical sterilizing agents for single-use medical devices utilizing animal tissues and their derivatives - Requirements for characterization, development, validation and routine control of a sterilization process for medical devices |
| 04/04/2016 |
Sterility |
14-337 |
Complete |
ISO |
14937 Second edition 2009-10-15 |
Sterilization of health care products - General requirements for characterization of a sterilizing agent and the development, validation and routine control of a sterilization process for medical devices |
| ANSI AAMI ISO |
14937:2009/(R)2013 |
Sterilization of health care products - General requirements for characterization of a sterilizing agent and the development, validation, and routine control of a sterilization process for medical devices |
| 04/04/2016 |
Sterility |
14-340 |
Complete |
ISO |
20857 First edition 2010-08-15 |
Sterilization of health care products - Dry heat - Requirements for the development, validation and routine control of a sterilization process for medical devices |
| ANSI AAMI ISO |
20857:2010/(R)2015 |
(Revision of ANSI/AAMI/ST63:2002) Sterilization of health care products - Dry heat - Requirements for the development, validation and routine control of a sterilization process for medical devices |
| 03/16/2012 |
Sterility |
14-332 |
Complete |
ISO |
11140-5 Second edition 2007-03-15 |
Sterilization of health care products - Chemical indicators - Part 5: Class 2 indicators for Bowie and Dick-type air removal tests |
| ANSI AAMI ISO |
11140-5:2007/(R)2012 |
Sterilization of health care products - Chemical indicators - Part 5: Class 2 indicators for Bowie and Dick air removal test sheets and packs |
| 08/14/2015 |
Sterility |
14-460 |
Partial |
ISO |
11140-1 Third edition 2014-11-01 |
Sterilization of health care products - Chemical indicators - Part 1: General requirements |
| ANSI AAMI ISO |
11140-1:2014 |
Sterilization of health care products - Chemical indicators - Part 1: General requirements |
| 01/30/2014 |
Sterility |
14-334 |
Partial |
ISO |
15882 Second edition 2008-09-01 |
Sterilization of health care products - Chemical indicators - Guidance for selection, use and interpretation of results |
| ANSI AAMI ISO |
15882:2008/(R)2013 |
Sterilization of health care products - Chemical indicators - Guidance for selection, use, and interpretation of results |
| 12/20/2021 |
Sterility |
14-571 |
Complete |
ISO |
11138-8 First edition 2021-07 |
Sterilization of health care products - Biological indicators - Part 8: Method for validation of a reduced incubation time for a biological indicator |
| 08/21/2017 |
Sterility |
14-502 |
Complete |
ISO |
11138-1 Third edition 2017-03 |
Sterilization of health care products - Biological indicators - Part 1: General requirements |
| ANSI AAMI ISO |
11138-1:2017 |
Sterilization of health care products - Biological indicators - Part 1: General requirements |
| 01/30/2014 |
Sterility |
14-336 |
Partial |
ISO |
14161 Second edition 2009-09-15 |
Sterilization of health care products - Biological indicators - Guidance for the selection, use and interpretation of results |
| ANSI AAMI ISO |
14161-2009/(R)2014 |
Sterilization of health care products - Biological indicators: Guidance for the selection, use and interpretation of results |
| 07/06/2020 |
Sterility |
14-544 |
Complete |
ISO |
18472 Second edition 2018-08 |
Sterilization of health care products - Biological and chemical indicators - Test equipment |
| 12/20/2021 |
General Plastic Surgery/
General Hospital |
6-471 |
Complete |
USP-NF |
M88880_05_01 |
Sterile Water for Irrigation |
| 05/29/2023 |
ObGyn/
Gastroenterology/
Urology |
9-143 |
Partial |
ISO |
20696 First edition 2018-06; Corrected 2019-12 |
Sterile urethral catheters for single use |
| 06/27/2016 |
General Plastic Surgery/
General Hospital |
6-364 |
Partial |
ISO |
8537 Third edition 2016-03-15 |
Sterile single-use syringes, with or without needle, for insulin |
| 12/19/2022 |
General Plastic Surgery/
General Hospital |
6-485 |
Complete |
ISO |
7886-4 Second Edition 2018-11 |
Sterile hypodermic syringes for single use - Part 4: Syringes with re-use prevention feature |
| 07/06/2020 |
General Plastic Surgery/
General Hospital |
6-441 |
Complete |
ISO |
7886-3 Second edition 2020-05 |
Sterile hypodermic syringes for single use - Part 3: Auto-disabled syringes for fixed-dose immunization |
| 07/06/2020 |
General Plastic Surgery/
General Hospital |
6-439 |
Complete |
ISO |
7886-2 Second edition 2020-04 |
Sterile hypodermic syringes for single use - Part 2: Syringes for use with power-driven syringe pumps |
| 06/07/2018 |
General Plastic Surgery/
General Hospital |
6-404 |
Complete |
ISO |
7886-1 Second edition 2017-05 |
Sterile hypodermic syringes for single use - Part 1: Syringes for manual use |
| 09/21/2016 |
General Plastic Surgery/
General Hospital |
6-379 |
Complete |
ISO |
7864 Fourth edition 2016-08-01 |
Sterile hypodermic needles for single use - Requirements and test methods |
| 12/19/2022 |
ObGyn/
Gastroenterology/
Urology |
9-144 |
Complete |
ISO |
20697 First edition 2018-06; Corrected 2018-09 |
Sterile drainage catheters and accessory devices for single use |
| 12/23/2016 |
InVitro Diagnostics |
7-267 |
Complete |
CLSI |
C24 4th Edition (Replaces C24-A3) |
Statistical Quality Control for Quantitative Measurement Procedures: Principles and Definitions |
| 04/04/2016 |
Radiology |
12-288 |
Complete |
NEMA |
MS 9-2008 (R2020) |
Standards Publication Characterization of Phased Array Coils for Diagnostic Magnetic Resonance Images |
| 06/07/2021 |
Orthopedic |
11-379 |
Complete |
ASTM |
F2978-20 |
Standards Guide to Optimize Scan Sequences for Clinical Diagnostic Evaluation of Metal-on-Metal Hip Arthroplasty Devices using Magnetic Resonance Imaging |
| 07/09/2014 |
Software/
Informatics |
13-65 |
Complete |
UL ANSI |
1998 Third Edition 2013 |
Standards for Safety Software in Programmable Components, Second Edition. [This Standard contains revisions through and including October 28, 2008] |
| 03/08/2004 |
InVitro Diagnostics |
7-86 |
Complete |
CLSI |
C29-A2 (Replaces C29-A) |
Standardization of Sodium and Potassium Ion Selective Electrode Systems to the Flame Photometric Reference Method; Approved Standard - Second Edition |
| 12/19/2022 |
Materials |
8-596 |
Complete |
ASTM |
D412-16(2021) |
Standard Test Methods for Vulcanized Rubber and Thermoplastic Elastomers - Tension |
| 12/20/2021 |
Ophthalmic |
10-128 |
Complete |
ASTM |
D882-18 |
Standard Test Methods for Tensile Properties of Thin Plastic Sheeting |
| 01/14/2019 |
Orthopedic |
11-343 |
Complete |
ASTM |
F2346-18 |
Standard Test Methods for Static and Dynamic Characterization of Spinal Artificial Discs |
| 12/20/2021 |
Orthopedic |
11-388 |
Complete |
ASTM |
F1717-21 |
Standard Test Methods for Spinal Implant Constructs in a Vertebrectomy Model |
| 12/19/2022 |
Orthopedic |
11-398 |
Complete |
ASTM |
F3574-22 |
Standard Test Methods for Sacroiliac Joint Fusion Devices |
| 07/09/2014 |
Sterility |
14-256 |
Complete |
ASTM |
F2095-07 (Reapproved 2021) |
Standard Test Methods for Pressure Decay Leak Test for Flexible Packages With and Without Restraining Plates |
| 09/17/2018 |
General I (QS/
RM) |
5-42 |
Complete |
ASTM |
D903-98 (Reapproved 2017) |
Standard Test Methods for Peel or Stripping Strength of Adhesive Bonds |
| 01/14/2019 |
Orthopedic |
11-346 |
Complete |
ASTM |
F2706-18 |
Standard Test Methods for Occipital-Cervical and Occipital-Cervical-Thoracic Spinal Implant Constructs in a Vertebrectomy Model |
| 04/04/2016 |
Materials |
8-413 |
Complete |
ASTM |
F2819-10 (Reapproved 2015) |
Standard Test Methods for Measurement of Straightness of Bar, Rod, Tubing and Wire to be used for Medical Devices |
| 01/30/2014 |
Sterility |
14-402 |
Complete |
ASTM |
F1140/F1140M-13 (Reapproved 2020)e1 |
Standard Test Methods for Internal Pressurization Failure Resistance of Unrestrained Packages |
| 05/29/2023 |
Cardiovascular |
3-184 |
Complete |
ASTM |
F2477-23 |
Standard Test Methods for in vitro Pulsatile Durability Testing of Vascular Stents and Endovascular Prostheses |
| 08/06/2013 |
Cardiovascular |
3-87 |
Complete |
ASTM |
F2477-07 (Reapproved 2013) |
Standard Test Methods for in vitro Pulsatile Durability |
| 08/21/2017 |
Materials |
8-451 |
Complete |
ASTM |
F2214-16 |
Standard Test Methods for In Situ Determination of Network Parameters of Crosslinked Ultra High Molecular Weight Polyethylene (UHMWPE) |
| 12/20/2021 |
Ophthalmic |
10-129 |
Complete |
ASTM |
D790-17 |
Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials |
| 01/27/2015 |
ObGyn/
Gastroenterology/
Urology |
9-45 |
Complete |
ASTM |
F2528-06(2023) |
Standard Test Methods for Enteral Feeding Devices with a Retention Balloon |
| 12/21/2020 |
Orthopedic |
11-330 |
Partial |
ASTM |
F2028-17 |
Standard Test Methods for Dynamic Evaluation of Glenoid Loosening or Disassociation |
| 12/18/2023 |
Orthopedic |
11-409 |
Complete |
ASTM |
F3495-23 |
Standard Test Methods for Determining the Static Failure Load of Ceramic Knee Femoral Components |
| 06/07/2021 |
Materials |
8-556 |
Complete |
ASTM |
F640-20 |
Standard Test Methods for Determining Radiopacity for Medical Use |
| 12/20/2021 |
Orthopedic |
11-385 |
Complete |
ASTM |
F2345-21 |
Standard Test Methods for Determination of Cyclic Fatigue Strength of Ceramic Modular Femoral Heads |
| 08/14/2015 |
General Plastic Surgery/
General Hospital |
6-354 |
Complete |
ASTM |
D7907-14 (Reapproved 2019) |
Standard Test Methods for Determination of Bactericidal Efficacy on the Surface of Medical Examination Gloves |
| 07/09/2014 |
Materials |
8-378 |
Complete |
ASTM |
D792-13 |
Standard Test Methods for Density and Specific Gravity (Relative Density) of Plastics by Displacement |
| 04/04/2016 |
Materials |
8-136 |
Complete |
ASTM |
F2458-05 (Reapproved 2015) |
Standard Test Method for Wound Closure Strength of Tissue Adhesives and Sealants |
| 01/14/2019 |
Orthopedic |
11-342 |
Complete |
ASTM |
F732-17 |
Standard Test Method for Wear Testing of Polymeric Materials Used in Total Joint Prostheses |
| 12/23/2016 |
Materials |
8-441 |
Complete |
ASTM |
F3109-16 |
Standard Test Method for Verification of Multi-Axis Force Measuring Platforms |
| 05/29/2023 |
Materials |
8-598 |
Complete |
ASTM |
F3109-22 |
Standard Test Method for Verification of Multi-Axis Force Measuring Platforms |
| 12/19/2022 |
Sterility |
14-581 |
Complete |
ASTM |
F2638-22 |
Standard Test Method for Using Aerosol Filtration for Measuring the Performance of Porous Packaging Materials as a Surrogate Microbial Barrier |
| 09/17/2018 |
Materials |
8-476 |
Complete |
ASTM |
F2004-17 |
Standard Test Method for Transformation Temperature of Nickel-Titanium Alloys by Thermal Analysis |
| 07/09/2014 |
Sterility |
14-435 |
Complete |
ASTM |
F2251-13 (Reapproved 2023) |
Standard Test Method for Thickness Measurement of Flexible Packaging Material |
| 05/29/2023 |
Materials |
8-601 |
Complete |
ASTM |
F2516-22 |
Standard Test Method for Tension Testing of Nickel-Titanium Superelastic Materials |
| 07/15/2019 |
Materials |
8-506 |
Complete |
ASTM |
F2516-18 |
Standard Test Method for Tension Testing of Nickel-Titanium Superelastic Materials |
| 06/07/2018 |
Materials |
8-113 |
Complete |
ASTM |
F1147-05 (Reapproved 2017)e1 |
Standard Test Method for Tension Testing of Calcium Phosphate and Metallic Coatings |
| 04/04/2016 |
Materials |
8-403 |
Complete |
ASTM |
D638-14 |
Standard Test Method for Tensile Properties of Plastics |
| 04/04/2016 |
Materials |
8-116 |
Complete |
ASTM |
F2258-05 (Reapproved 2015) |
Standard Test Method for Strength Properties of Tissue Adhesives in Tension |
| 04/04/2016 |
Materials |
8-115 |
Complete |
ASTM |
F2256-05 (Reapproved 2015) |
Standard Test Method for Strength Properties of Tissue Adhesives in T-Peel by Tension Loading |
| 04/04/2016 |
Materials |
8-114 |
Complete |
ASTM |
F2255-05 (Reapproved 2015) |
Standard Test Method for Strength Properties of Tissue Adhesives in Lap Shear by Tension Loading |
| 04/04/2016 |
Materials |
8-400 |
Complete |
ASTM |
F1854-15 |
Standard Test Method for Stereological Evaluation of Porous Coatings on Medical Implants |
| 12/20/2021 |
Cardiovascular |
3-180 |
Complete |
ASTM |
F3505-21 |
Standard Test Method for Stent and Endovascular Prosthesis Kink Resistance |
| 08/21/2017 |
Orthopedic |
11-280 |
Complete |
ASTM |
F2624-12 (Reapproved 2020) |
Standard Test Method for Static, Dynamic, and Wear Assessment of Extra-Discal Single Level Spinal Constructs |
| 12/18/2023 |
Orthopedic |
11-405 |
Complete |
ASTM |
F1829-23 |
Standard Test Method for Static Evaluation of Anatomic Glenoid Locking Mechanism in Shear |
| 09/17/2018 |
Orthopedic |
11-334 |
Complete |
ASTM |
F1829-17 |
Standard Test Method for Static Evaluation of Anatomic Glenoid Locking Mechanism in Shear |
| 12/19/2022 |
ObGyn/
Gastroenterology/
Urology |
9-142 |
Complete |
ASTM |
D1894-14 |
Standard Test Method for Static and Kinetic Coefficients of Friction of Plastic Film and Sheeting |
| 12/21/2020 |
Materials |
8-545 |
Complete |
ASTM |
F2977-20 |
Standard Test Method for Small Punch Testing of Polymeric Biomaterials Used in Surgical Implants |
| 09/17/2018 |
Materials |
8-112 |
Complete |
ASTM |
F1044-05 (Reapproved 2017)e1 |
Standard Test Method for Shear Testing of Calcium Phosphate Coatings and Metallic Coatings |
| 09/17/2018 |
Materials |
8-380 |
Complete |
ASTM |
F1160-14 (Reapproved 2017)e1 |
Standard Test Method for Shear and Bending Fatigue Testing of Calcium Phosphate and Metallic Medical and Composite Calcium Phosphate/Metallic Coatings |
| 12/18/2023 |
Sterility |
14-596 |
Complete |
ASTM |
F88/F88M-23 |
Standard Test Method for Seal Strength of Flexible Barrier Materials |
| 05/30/2022 |
Sterility |
14-573 |
Complete |
ASTM |
F88/F88M-21 |
Standard Test Method for Seal Strength of Flexible Barrier Materials |
| 06/07/2021 |
Materials |
8-560 |
Complete |
ASTM |
D1415-18 |
Standard Test Method for Rubber Property - International Hardness |
| 06/07/2018 |
General Plastic Surgery/
General Hospital |
6-406 |
Complete |
ASTM |
F1862/F1862M-17 |
Standard Test Method for Resistance of Medical Face Masks to Penetration by Synthetic Blood (Horizontal Projection of Fixed Volume at a Known Velocity) |
| 05/29/2023 |
General Plastic Surgery/
General Hospital |
6-491 |
Complete |
ASTM |
F1670/F1670M-17a |
Standard Test Method for Resistance of Materials Used in Protective Clothing to Penetration by Synthetic Blood |
| 06/07/2018 |
General Plastic Surgery/
General Hospital |
6-402 |
Complete |
ASTM |
F1670/F1670M-17 |
Standard Test Method for Resistance of Materials Used in Protective Clothing to Penetration by Synthetic Blood |
| 01/30/2014 |
General Plastic Surgery/
General Hospital |
6-306 |
Complete |
ASTM |
F1671/F1671M-13 |
Standard Test Method for Resistance of Materials Used in Protective Clothing to Penetration by Blood-Borne Pathogens Using Phi-X174 Bacteriophage Penetration as a Test System |
| 05/29/2023 |
General Plastic Surgery/
General Hospital |
6-488 |
Complete |
ASTM |
F1671/F1671M-22 |
Standard Test Method for Resistance of Materials Used in Protective Clothing to Penetration by Blood-Borne Pathogens Using Phi-X174 Bacteriophage Penetration as a Test System |
| 07/06/2020 |
General Plastic Surgery/
General Hospital |
6-178 |
Partial |
ASTM |
D6124-06(2022) |
Standard Test Method for Residual Powder on Medical Gloves |
| 04/04/2016 |
Materials |
8-107 |
Complete |
ASTM |
F746-04 (Reapproved 2014) |
Standard Test Method for Pitting or Crevice Corrosion of Metallic Surgical Implant Materials |
| 05/29/2023 |
General Plastic Surgery/
General Hospital |
6-496 |
Partial |
ASTM |
F739-20 |
Standard Test Method for Permeation of Liquids and Gases Through Protective Clothing Materials Under Conditions of Continuous Contact |
| 07/09/2014 |
Sterility |
14-282 |
Complete |
ASTM |
F2338-09 (Reapproved 2020) |
Standard Test Method for Nondestructive Detection of Leaks in Packages by Vacuum Decay Method |
| 07/15/2019 |
Sterility |
14-532 |
Complete |
ASTM |
F3287-17e1 |
Standard Test Method for Nondestructive Detection of Leaks in Packages by Mass Extraction Method |
| 07/09/2014 |
Sterility |
14-433 |
Complete |
ASTM |
F2227-13 (Reapproved 2021) |
Standard Test Method for Non-Destructive Detection of Leaks in Non-sealed and Empty Packaging Trays by CO2 Tracer Gas Method |
| 07/09/2014 |
Sterility |
14-434 |
Complete |
ASTM |
F2228-13 (Reapproved 2021) |
Standard Test Method for Non-Destructive Detection of Leaks in Medical Packaging Which Incorporates Porous Barrier Material by C02 Tracer Gas Method |
| 05/30/2022 |
Sterility |
14-574 |
Complete |
ASTM |
F1608-21 |
Standard Test Method for Microbial Ranking of Porous Packaging Materials (Exposure Chamber Method) |
| 12/21/2020 |
Nanotechnology |
18-18 |
Complete |
ASTM |
E3247-20 |
Standard Test Method for Measuring the Size of Nanoparticles in Aqueous Media Using Dynamic Light Scattering |
| 05/29/2023 |
Sterility |
14-584 |
Complete |
ASTM |
F2391-22 |
Standard Test Method for Measuring Package and Seal Integrity Using Helium as the Tracer Gas |
| 12/23/2016 |
Sterility |
14-169 |
Complete |
ASTM |
F2391-05 (Reapproved 2016) |
Standard Test Method for Measuring Package and Seal Integrity Using Helium as the Tracer Gas |
| 09/17/2018 |
Orthopedic |
11-185 |
Complete |
ASTM |
F2267-04 (Reapproved 2018) |
Standard Test Method for Measuring Load Induced Subsidence of Intervertebral Body Fusion Device Under Static Axial Compression |
| 01/14/2019 |
Cardiovascular |
3-79 |
Complete |
ASTM |
F2079-09 (Reapproved 2017) |
Standard Test Method for Measuring Intrinsic Elastic Recoil of Balloon-Expandable Stents |
| 07/06/2020 |
Orthopedic |
11-363 |
Complete |
ASTM |
F897-19 |
Standard Test Method for Measuring Fretting Corrosion of Osteosynthesis Plates and Screws |
| 04/04/2016 |
Orthopedic |
11-304 |
Complete |
ASTM |
F3107-14 |
Standard Test Method for Measuring Accuracy after Mechanical Disturbances on Reference Frames of Computer Assisted Surgery Systems |
| 09/17/2018 |
Materials |
8-467 |
Complete |
ASTM |
F1978-18 |
Standard Test Method for Measuring Abrasion Resistance of Metallic Thermal Spray Coatings by Using the Taber Abraser |
| 05/29/2023 |
Materials |
8-600 |
Complete |
ASTM |
F1978-22 |
Standard Test Method for Measuring Abrasion Resistance of Metallic Thermal Spray Coatings by Using the Taber Abraser |
| 07/06/2020 |
Materials |
8-526 |
Complete |
ASTM |
F2182-19e2 |
Standard Test Method for Measurement of Radio Frequency Induced Heating On or Near Passive Implants During Magnetic Resonance |
| 04/04/2016 |
Materials |
8-415 |
Complete |
ASTM |
F2778-09 (Reapproved 2020) |
Standard Test Method for Measurement of Percent Crystallinity of Polyetheretherketone (PEEK) Polymers by Means of Specular Reflectance Fourier Transform Infrared Spectroscopy (R-FTIR) |
| 09/17/2018 |
Materials |
8-466 |
Complete |
ASTM |
F2213-17 |
Standard Test Method for Measurement of Magnetically Induced Torque on Medical Devices in the Magnetic Resonance Environment |
| 12/20/2021 |
Materials |
8-571 |
Complete |
ASTM |
F2052-21 |
Standard Test Method for Measurement of Magnetically Induced Displacement Force on Medical Devices in the Magnetic Resonance Environment |
| 04/04/2016 |
Materials |
8-404 |
Complete |
ASTM |
E647-15 |
Standard Test Method for Measurement of Fatigue Crack Growth Rates |
| 12/23/2016 |
Materials |
8-368 |
Complete |
ASTM |
F2625-10 (Reapproved 2016) |
Standard Test Method for Measurement of Enthalpy of Fusion, Percent Crystallinity, and Melting Point of Ultra-High-Molecular Weight Polyethylene by Means of Differential Scanning Calorimetry |
| 12/20/2021 |
Materials |
8-565 |
Complete |
ASTM |
F2754/F2754M-21 |
Standard Test Method for Measurement of Camber, Cast, Helix and Direction of Helix of Coiled Wire |
| 01/30/2014 |
Sterility |
14-400 |
Complete |
ASTM |
F2203-13 (Reapproved 2022) |
Standard Test Method for Linear Measurement Using Precision Steel Rule |
| 07/15/2019 |
Materials |
8-518 |
Complete |
ASTM |
F3306-19 |
Standard Test Method for Ion Release Evaluation of Medical Implants |
| 08/21/2017 |
Materials |
8-452 |
Complete |
ASTM |
F1635-16 |
Standard Test Method for in vitro Degradation Testing of Hydrolytically Degradable Polymer Resins and Fabricated Forms for Surgical Implants |
| 12/18/2023 |
Materials |
8-608 |
Complete |
ASTM |
F2214-23 |
Standard Test Method for In Situ Determination of Network Parameters of Crosslinked Ultra High Molecular Weight Polyethylene (UHMWPE) |
| 01/14/2019 |
General Plastic Surgery/
General Hospital |
6-411 |
Complete |
ASTM |
D6499-18 |
Standard Test Method for Immunological Measurement of Antigenic Protein in Hevea Natural Rubber (HNR) and its Products |
| 06/07/2018 |
General Plastic Surgery/
General Hospital |
6-214 |
Complete |
ASTM |
D6355-07(2022) |
Standard Test Method for Human Repeat Insult Patch Testing of Medical Gloves |
| 06/27/2016 |
Orthopedic |
11-308 |
Complete |
ASTM |
F3161-16 |
Standard Test Method for Finite Element Analysis (FEA) of Metallic Orthopaedic Total Knee Femoral Components under Closing Conditions |
| 12/19/2022 |
Orthopedic |
11-397 |
Complete |
ASTM |
F3210-22e1 |
Standard Test Method for Fatigue Testing of Total Knee Femoral Components Under Closing Conditions |
| 06/07/2021 |
Orthopedic |
11-382 |
Complete |
ASTM |
F3090-20 |
Standard Test Method for Fatigue Testing of Acetabular Devices for Total Hip Replacement |
| 09/17/2018 |
Materials |
8-468 |
Complete |
ASTM |
F2459-18 |
Standard Test Method for Extracting Residue from Metallic Medical Components and Quantifying via Gravimetric Analysis |
| 01/27/2015 |
Materials |
8-383 |
Complete |
ASTM |
F1926/F1926M-14 |
Standard Test Method for Evaluation of the Environmental Stability of Calcium Phosphate Granules, Fabricated Forms, and Coatings |
| 07/06/2020 |
Sterility |
14-549 |
Complete |
ASTM |
F3004-13 (Reapproved 2020) |
Standard Test Method for Evaluation of Seal Quality and Integrity Using Airborne Ultrasound |
| 08/06/2013 |
Materials |
8-153 |
Complete |
ASTM |
F2119-07 (Reapproved 2013) |
Standard Test Method for Evaluation of MR Image Artifacts from Passive Implants |
| 07/06/2020 |
Orthopedic |
11-366 |
Complete |
ASTM |
F2381-19 |
Standard Test Method for Evaluating Trans-Vinylene Yield in Irradiated Ultra-High Molecular Weight Polyethylene Fabricated Forms Intended for Surgical Implants by Infrared Spectroscopy |
| 12/18/2023 |
Orthopedic |
11-402 |
Complete |
ASTM |
F1798-21 |
Standard Test Method for Evaluating the Static and Fatigue Properties of Interconnection Mechanisms and Subassemblies Used in Spinal Arthrodesis Implants |
| 12/21/2020 |
Materials |
8-546 |
Complete |
ASTM |
F3044-20 |
Standard Test Method for Evaluating the Potential for Galvanic Corrosion for Medical Implants |
| 07/09/2014 |
Anesthesiology |
1-99 |
Complete |
ASTM |
G175-13 (Reapproved 2021) |
Standard Test Method for Evaluating the Ignition Sensitivity and Fault Tolerance of Oxygen Regulators Used for Medical and Emergency Applications |
| 05/29/2023 |
General Plastic Surgery/
General Hospital |
6-493 |
Complete |
ASTM |
F2101-23 |
Standard Test Method for Evaluating the Bacterial Filtration Efficiency (BFE) of Medical Face Mask Materials, Using a Biological Aerosol of Staphylococcus aureus |
| 12/23/2019 |
General Plastic Surgery/
General Hospital |
6-427 |
Complete |
ASTM |
F2101-19 |
Standard Test Method for Evaluating the Bacterial Filtration Efficiency (BFE) of Medical Face Mask Materials, Using a Biological Aerosol of Staphylococcus aureus |
| 12/20/2021 |
Orthopedic |
11-392 |
Complete |
ASTM |
F2723-21 |
Standard Test Method for Evaluating Mobile Bearing Knee Tibial Baseplate/Bearing Resistance to Dynamic Disassociation |
| 12/20/2021 |
Orthopedic |
11-393 |
Complete |
ASTM |
F2724-21 |
Standard Test Method for Evaluating Mobile Bearing Knee Dislocation |
| 12/18/2023 |
Orthopedic |
11-408 |
Complete |
ASTM |
F2777-23 |
Standard Test Method for Evaluating Knee Bearing (Tibial Insert) Endurance and Deformation Under High Flexion |
| 01/14/2019 |
Tissue Engineering |
15-56 |
Complete |
ASTM |
F3224-17 |
Standard Test Method for Evaluating Growth of Engineered Cartilage Tissue using Magnetic Resonance Imaging |
| 06/07/2021 |
Orthopedic |
11-381 |
Complete |
ASTM |
F2582-20 |
Standard Test Method for Dynamic Impingement Between Femoral and Acetabular Hip Components |
| 12/23/2016 |
Tissue Engineering |
15-48 |
Complete |
ASTM |
F2605-16 |
Standard Test Method for Determining the Molar Mass of Sodium Alginate by Size Exclusion Chromatography with Multi-angle Light Scattering Detection (SEC-MALS) |
| 07/06/2020 |
Tissue Engineering |
15-62 |
Complete |
ASTM |
F2602-18 |
Standard Test Method for Determining the Molar Mass of Chitosan and Chitosan Salts by Size Exclusion Chromatography with Multi-angle Light Scattering Detection (SEC-MALS) |
| 12/19/2022 |
Orthopedic |
11-394 |
Complete |
ASTM |
F1820-22 |
Standard Test Method for Determining the Forces for Disassembly of Modular Acetabular Devices |
| 01/14/2019 |
Materials |
8-485 |
Complete |
ASTM |
F3260-18 |
Standard Test Method for Determining the Flexural Stiffness of Medical Textiles |
| 12/21/2020 |
Orthopedic |
11-371 |
Complete |
ASTM |
F2009-20 |
Standard Test Method for Determining the Axial Disassembly Force of Taper Connections of Modular Prostheses |
| 08/21/2017 |
Sterility |
14-501 |
Complete |
ASTM |
F1886/F1886M-16 |
Standard Test Method for Determining Integrity of Seals for Flexible Packaging by Visual Inspection |
| 06/07/2021 |
Tissue Engineering |
15-66 |
Complete |
ASTM |
F2260-18 |
Standard Test Method for Determining Degree of Deacetylation in Chitosan Salts by Proton Nuclear Magnetic Resonance (1HNMR) Spectroscopy |
| 05/29/2023 |
ObGyn/
Gastroenterology/
Urology |
9-145 |
Complete |
ASTM |
D7661-18 |
Standard Test Method for Determining Compatibility of Personal Lubricants with Natural Rubber Latex Condoms |
| 09/17/2018 |
ObGyn/
Gastroenterology/
Urology |
9-67 |
Complete |
ASTM |
D7661-10 (Reapproved 2017) |
Standard Test Method for Determining Compatibility of Personal Lubricants with Natural Rubber Latex Condoms |
| 12/23/2016 |
Materials |
8-437 |
Complete |
ASTM |
F2082/F2082M-16 |
Standard Test Method for Determination of Transformation Temperature of Nickel-Titanium Shape Memory Alloys by Bend and Free Recovery |
| 12/21/2020 |
Orthopedic |
11-373 |
Complete |
ASTM |
F1223-20 |
Standard Test Method for Determination of Total Knee Replacement Constraint |
| 07/09/2014 |
Sterility |
14-257 |
Complete |
ASTM |
D3078-02 (Reapproved 2021)e1 |
Standard Test Method for Determination of Leaks in Flexible Packaging by Bubble Emission |
| 06/07/2021 |
Orthopedic |
11-383 |
Complete |
ASTM |
F3143-20 |
Standard Test Method for Determination of Frictional Torque and Friction Factor for Hip Replacement Bearings under Standard Conditions Using a Reciprocal Friction Simulator |
| 06/07/2021 |
Orthopedic |
11-384 |
Complete |
ASTM |
F3446-20 |
Standard Test Method for Determination of Frictional Torque and Friction Factor for Hip Implants Using an Anatomical Motion Hip Simulator |
| 12/23/2019 |
General Plastic Surgery/
General Hospital |
6-424 |
Complete |
ASTM |
D5151-19(2023) |
Standard Test Method for Detection of Holes in Medical Gloves |
| 06/27/2015 |
Sterility |
14-484 |
Complete |
ASTM |
F1929-15 |
Standard Test Method for Detecting Seal Leaks in Porous Medical Packaging by Dye Penetration |
| 09/17/2018 |
Sterility |
14-516 |
Complete |
ASTM |
F3039-15 |
Standard Test Method for Detecting Leaks in Nonporous Packaging or Flexible Barrier Materials by Dye Penetration |
| 12/18/2023 |
Sterility |
14-593 |
Complete |
ASTM |
F3039-23 |
Standard Test Method for Detecting Leaks in Nonporous Packaging or Flexible Barrier Materials by Dye Penetration |
| 01/15/2013 |
Sterility |
14-359 |
Complete |
ASTM |
F2096-11 (Reapproved 2019) |
Standard Test Method for Detecting Gross Leaks in Packaging by Internal Pressurization (Bubble Test) |
| 01/14/2019 |
Materials |
8-482 |
Complete |
ASTM |
D1505-18 |
Standard Test Method for Density of Plastics by the Density-Gradient Technique |
| 09/17/2018 |
Orthopedic |
11-341 |
Complete |
ASTM |
F3140-17 |
Standard Test Method for Cyclic Fatigue Testing of Metal Tibial Tray Components of Unicondylar Knee Joint Replacements |
| 12/18/2023 |
Orthopedic |
11-407 |
Complete |
ASTM |
F3140-23 |
Standard Test Method for Cyclic Fatigue Testing of Metal Tibial Tray Components of Unicondylar Knee Joint Replacements |
| 09/17/2018 |
Materials |
8-478 |
Complete |
ASTM |
F1089-18 |
Standard Test Method for Corrosion of Surgical Instruments |
| 08/21/2017 |
General Plastic Surgery/
General Hospital |
6-400 |
Complete |
ASTM |
F3212-16(2023) |
Standard Test Method for Coring Testing of Huber Needles |
| 04/04/2016 |
Materials |
8-401 |
Complete |
ASTM |
F2118-14 (Reapproved 2020) |
Standard Test Method for Constant Amplitude of Force Controlled Fatigue Testing of Acrylic Bone Cement Materials |
| 12/23/2019 |
Materials |
8-522 |
Complete |
ASTM |
F2129-19a |
Standard Test Method for Conducting Cyclic Potentiodynamic Polarization Measurements to Determine the Corrosion Susceptibility of Small Implant Devices |
| 01/30/2014 |
Sterility |
14-403 |
Complete |
ASTM |
F2054/F2054M-13 (Reapproved 2020) |
Standard Test Method for Burst Testing of Flexible Package Seals Using Internal Air Pressurization Within Restraining Plates |
| 04/04/2016 |
Materials |
8-135 |
Complete |
ASTM |
F2392-04 (Reapproved 2015) |
Standard Test Method for Burst Strength of Surgical Sealants |
| 03/16/2012 |
General Plastic Surgery/
General Hospital |
6-271 |
Complete |
ASTM |
F1874-98 (Reapproved 2011) |
Standard Test Method for Bend Testing of Needles Used in Surgical Sutures |
| 07/15/2019 |
Biocompatibility |
2-266 |
Complete |
ASTM |
F2382-18 |
Standard Test Method for Assessment of Circulating Blood-Contacting Medical Device Materials on Partial Thromboplastin Time (PTT) |
| 12/18/2023 |
Nanotechnology |
18-24 |
Partial |
ASTM |
E2524-22 |
Standard Test Method for Analysis of Hemolytic Properties of Nanoparticles |
| 04/04/2016 |
General Plastic Surgery/
General Hospital |
6-356 |
Complete |
ASTM |
D5712-15(2020) |
Standard Test Method for Analysis of Aqueous Extractable Protein in Natural Rubber in Latex, Natural Rubber, and Elastomeric Products Using the Modified Lowry Method |
| 12/23/2016 |
Biocompatibility |
2-189 |
Complete |
ASTM |
F895-11 (Reapproved 2016) |
Standard Test Method for Agar Diffusion Cell Culture Screening for Cytotoxicity |
| 03/16/2012 |
Tissue Engineering |
15-31 |
Complete |
ASTM |
F2312-11 (Reapproved 2020) |
Standard Terminology Relating to Tissue Engineered Medical Products |
| 08/21/2017 |
Orthopedic |
11-175 |
Complete |
ASTM |
F1582-98 (Reapproved 2016) |
Standard Terminology Relating to Spinal Implants |
| 03/16/2012 |
General Plastic Surgery/
General Hospital |
6-268 |
Complete |
ASTM |
F921-10 (Reapproved 2018) |
Standard Terminology Relating to Hemostatic Forceps |
| 12/21/2020 |
Sterility |
14-554 |
Complete |
ASTM |
F17-20 |
Standard Terminology Relating to Flexible Barrier Packaging |
| 06/07/2018 |
General Plastic Surgery/
General Hospital |
6-270 |
Complete |
ASTM |
F1840-10 (Reapproved 2016) |
Standard Terminology for Surgical Suture Needles |
| 03/16/2012 |
General Plastic Surgery/
General Hospital |
6-269 |
Complete |
ASTM |
F1078-10 (Reapproved 2018) |
Standard Terminology for Surgical Scissors-Inserted and Non-Inserted Blades |
| 12/20/2021 |
Materials |
8-564 |
Complete |
ASTM |
F2005-21 |
Standard Terminology for Nickel-Titanium Shape Memory Alloys |
| 06/27/2016 |
Materials |
8-432 |
Complete |
ISO ASTM |
52921 First Edition 2013-06-01 |
Standard Terminology for Additive Manufacturing-Coordinate Systems and Test Methodologies. |
| 09/17/2018 |
Orthopedic |
11-326 |
Complete |
ASTM |
F384-17 |
Standard Specifications and Test Methods for Metallic Angled Orthopedic Fracture Fixation Devices |
| 12/21/2020 |
Orthopedic |
11-375 |
Complete |
ASTM |
F2193-20 |
Standard Specifications and Test Methods for Components Used in the Surgical Fixation of the Spinal Skeletal System |
| 05/30/2022 |
Materials |
8-591 |
Complete |
ASTM |
F2229-21 |
Standard Specification for Wrought, Nitrogen Strengthened 23Manganese-21Chromium-1Molybdenum Low-Nickel Stainless Steel Alloy Bar and Wire for Surgical Implants (UNS S29108) |
| 06/07/2021 |
Materials |
8-555 |
Complete |
ASTM |
F1472-20a |
Standard Specification for Wrought Titanium-6Aluminum-4Vanadium Alloy for Surgical Implant Applications (UNS R56400) |
| 05/29/2023 |
Materials |
8-603 |
Complete |
ASTM |
F1472-23 |
Standard Specification for Wrought Titanium-6Aluminum-4Vanadium Alloy for Surgical Implant Applications (UNS R56400) |
| 05/29/2023 |
Materials |
8-599 |
Complete |
ASTM |
F1295-22 |
Standard Specification for Wrought Titanium-6 Aluminum-7Niobium Alloy for Surgical Implant Applications (UNS R56700) |
| 08/21/2017 |
Materials |
8-453 |
Complete |
ASTM |
F1295-16 |
Standard Specification for Wrought Titanium-6 Aluminum-7Niobium Alloy for Surgical Implant Applications (UNS R56700) |
| 07/09/2014 |
Materials |
8-377 |
Complete |
ASTM |
F136-13 |
Standard Specification for Wrought Titanium-6 Aluminum-4 Vanadium ELI (Extra Low Interstitial) Alloy for Surgical Implant Applications (UNS R56401) |
| 05/30/2022 |
Materials |
8-584 |
Complete |
ASTM |
F2146-22 |
Standard Specification for Wrought Titanium-3Aluminum-2.5Vanadium Alloy Seamless Tubing for Surgical Implant Applications (UNS R56320) |
| 12/23/2019 |
Materials |
8-484 |
Complete |
ASTM |
F2066-18 |
Standard Specification for Wrought Titanium-15 Molybdenum Alloy for Surgical Implant Applications (UNS R58150) |
| 08/06/2013 |
Materials |
8-158 |
Complete |
ASTM |
F1713-08 (Reapproved 2013) |
Standard Specification for Wrought Titanium-13 Niobium-13 Zirconium Alloy for Surgical Implant Applications (UNS R58130) |
| 04/04/2016 |
Materials |
8-394 |
Complete |
ASTM |
F1472-14 |
Standard Specification for Wrought Titanium -6Aluminum -4Vanadium Alloy for Surgical Implant Applications (UNS R56400) |
| 12/20/2021 |
Materials |
8-566 |
Complete |
ASTM |
F1813-21 |
Standard Specification for Wrought Titanium - 12 Molybdenum - 6 Zirconium - 2 Iron Alloy for Surgical Implant (UNS R58120) |
| 07/06/2020 |
Materials |
8-527 |
Complete |
ASTM |
F899-20 |
Standard Specification for Wrought Stainless Steels for Surgical Instruments |
| 12/21/2020 |
Materials |
8-550 |
Complete |
ASTM |
F2181-20 |
Standard Specification for Wrought Seamless Stainless Steel Tubing for Surgical Implants |
| 05/29/2023 |
Materials |
8-604 |
Complete |
ASTM |
F2257-22 |
Standard Specification for Wrought Seamless or Welded and Drawn 18Chromium-14Nickel-2.5Molybdenum Stainless Steel Small Diameter Tubing for Surgical Implants (UNS S31673) |
| 07/06/2020 |
Materials |
8-529 |
Complete |
ASTM |
F2633-19 |
Standard Specification for Wrought Seamless Nickel-Titanium Shape Memory Alloy Tube for Medical Devices and Surgical Implants |
| 12/23/2019 |
Materials |
8-481 |
Complete |
ASTM |
F1314-18 |
Standard Specification for Wrought Nitrogen Strengthened 22 Chromium-13 Nickel-5 Manganese-2.5 Molybdenum Stainless Steel Alloy Bar and Wire for Surgical Implants (UNS S20910) |
| 12/20/2021 |
Materials |
8-568 |
Complete |
ASTM |
F1586-21 |
Standard Specification for Wrought Nitrogen Strengthened 21 Chromium-10 Nickel-3 Manganese-2.5 Molybdenum Stainless Steel Bar for Surgical Implants (UNS S31675) |
| 12/23/2019 |
Materials |
8-480 |
Complete |
ASTM |
F2063-18 |
Standard Specification for Wrought Nickel-Titanium Shape Memory Alloys for Medical Devices and Surgical Implants |
| 12/23/2019 |
Materials |
8-507 |
Complete |
ASTM |
F688-19 |
Standard Specification for Wrought Cobalt-35Nickel-20Chromium-10Molybdenum Alloy Plate, Sheet, and Foil for Surgical Implants (UNS R30035) |
| 12/21/2020 |
Materials |
8-541 |
Complete |
ASTM |
F1537-20 |
Standard Specification for Wrought Cobalt-28Chromium-6Molybdenum Alloys for Surgical Implants (UNS R31537, UNS R31538, and UNS R31539) |
| 12/21/2020 |
Materials |
8-540 |
Complete |
ASTM |
F1091-20 |
Standard Specification for Wrought Cobalt-20Chromium-15Tungsten-10Nickel Alloy Surgical Fixation Wire (UNS R30605) |
| 04/04/2016 |
Materials |
8-399 |
Complete |
ASTM |
F90-14 |
Standard Specification for Wrought Cobalt-20 Chromium-15 Tungsten-10 Nickel Alloy for Surgical Implant Applications (UNS R30605) |
| 08/21/2017 |
Materials |
8-449 |
Complete |
ASTM |
F1058-16 |
Standard Specification for Wrought 40Cobalt-20Chromium-16Iron-15Nickel-7Molybdenum Alloy Wire, Strip, and Strip Bar for Surgical Implant Applications (UNS R30003 and UNS R30008) |
| 05/30/2022 |
Materials |
8-583 |
Complete |
ASTM |
F562-22 |
Standard Specification for Wrought 35Cobalt-35Nickel-20Chromium-10Molybdenum Alloy for Surgical Implant Applications (UNS R30035) |
| 12/21/2020 |
Materials |
8-542 |
Complete |
ASTM |
F138-19 |
Standard Specification for Wrought 18Chromium-14Nickel-2.5Molybdenum Stainless Steel Bar and Wire for Surgical Implants (UNS S31673) |
| 04/04/2016 |
Materials |
8-393 |
Complete |
ASTM |
F1350-15 |
Standard Specification for Wrought 18 Chromium-14 Nickel-2.5 Molybdenum Stainless Steel Surgical Fixation Wire (UNS S31673) |
| 12/21/2020 |
Materials |
8-539 |
Complete |
ASTM |
F139-19 |
Standard Specification for Wrought 18 Chromium-14 Nickel-2.5 Molybdenum Stainless Steel Sheet and Strip for Surgical Implants (UNS S31673) |
| 09/09/2008 |
Software/
Informatics |
13-22 |
Complete |
CLSI |
LIS07-A |
Standard Specification for Use of Bar Codes on Specimen Tubes in the Clinical Laboratory |
| 06/07/2018 |
Materials |
8-356 |
Complete |
ASTM |
F67-13 (Reapproved 2017) |
Standard Specification for Unalloyed Titanium, for Surgical Implant Applications (UNS R50250, UNS R50400, UNS R50550, UNS R50700) |
| 05/30/2022 |
Materials |
8-588 |
Complete |
ASTM |
F560-22 |
Standard Specification for Unalloyed Tantalum for Surgical Implant Applications (UNS R05200, UNS R05400) |
| 12/20/2021 |
Materials |
8-569 |
Complete |
ASTM |
F648-21 |
Standard Specification for Ultra-High-Molecular-Weight Polyethylene Powder and Fabricated Form for Surgical Implants |
| 12/20/2021 |
Materials |
8-573 |
Complete |
ASTM |
F2695-12(2020) |
Standard Specification for Ultra-High Molecular Weight Polyethylene Powder Blended With Alpha-Tocopherol (Vitamin E) and Fabricated Forms for Surgical Implant Applications |
| 09/09/2008 |
Software/
Informatics |
13-17 |
Complete |
CLSI |
LIS02-A2 |
Standard Specification for Transferring Information Between Clinical Instruments and Computer Systems; Approved Standard-Second Edition |
| 06/07/2021 |
Orthopedic |
11-376 |
Complete |
ASTM |
F2033-20 |
Standard Specification for Total Hip Joint Prosthesis and Hip Endoprosthesis Bearing Surfaces Made of Metallic, Ceramic, and Polymeric Materials |
| 12/18/2023 |
Orthopedic |
11-404 |
Complete |
ASTM |
F2887-23 |
Standard Specification for Total Elbow Prostheses |
| 08/21/2017 |
Orthopedic |
11-321 |
Complete |
ASTM |
F2887-17 |
Standard Specification for Total Elbow Prostheses |
| 12/20/2021 |
Orthopedic |
11-386 |
Complete |
ASTM |
F2665-21 |
Standard Specification for Total Ankle Replacement Prosthesis |
| 12/20/2021 |
Materials |
8-570 |
Complete |
ASTM |
F1108-21 |
Standard Specification for Titanium-6Aluminum-4Vanadium Alloy Castings for Surgical Implants (UNS R56406) |
| 12/23/2019 |
Materials |
8-499 |
Complete |
ASTM |
F1580-18 |
Standard Specification for Titanium and Titanium-6 Aluminum-4 Vanadium Alloy Powders for Coatings of Surgical Implants |
| 12/21/2020 |
Materials |
8-537 |
Complete |
ASTM |
F620-20 |
Standard Specification for Titanium Alloy Forgings for Surgical Implants in the Alpha Plus Beta Condition |
| 12/21/2020 |
General Plastic Surgery/
General Hospital |
6-448 |
Partial |
ASTM |
F2407-20 |
Standard Specification for Surgical Gowns Intended for Use in Healthcare Facilities |
| 06/07/2018 |
Materials |
8-337 |
Complete |
ASTM |
F621-12 (Reapproved 2017) |
Standard Specification for Stainless Steel Forgings for Surgical Implants |
| 03/16/2012 |
General Plastic Surgery/
General Hospital |
6-272 |
Complete |
ASTM |
F2062-00 (Reapproved 2018) |
Standard Specification for Square Drive Interconnections on Surgical Instruments |
| 08/14/2015 |
General Plastic Surgery/
General Hospital |
6-110 |
Complete |
ASTM |
F1441-03 (Reapproved 2014) |
Standard Specification for Soft-Tissue Expander Devices |
| 08/14/2015 |
General Plastic Surgery/
General Hospital |
6-185 |
Complete |
ASTM |
F881-94 (Reapproved 2014) |
Standard Specification for Silicone Elastomer Facial Implants |
| 12/23/2019 |
Orthopedic |
11-360 |
Complete |
ASTM |
F1378-18e1 |
Standard Specification for Shoulder Prostheses |
| 05/30/2022 |
Materials |
8-589 |
Complete |
ASTM |
F1925-22 |
Standard Specification for Semi-Crystalline Poly(lactide) Polymer and Copolymer Resins for Surgical Implants |
| 12/21/2020 |
Materials |
8-543 |
Partial |
ASTM |
F755-19 |
Standard Specification for Selection of Porous Polyethylene for Use in Surgical Implants |
| 07/06/2020 |
General Plastic Surgery/
General Hospital |
6-443 |
Partial |
ASTM |
D3577-19 |
Standard Specification for Rubber Surgical Gloves |
| 07/06/2020 |
General Plastic Surgery/
General Hospital |
6-440 |
Partial |
ASTM |
D3578-19(2023) |
Standard Specification for Rubber Examination Gloves |
| 01/30/2014 |
ObGyn/
Gastroenterology/
Urology |
9-85 |
Complete |
ASTM |
D6976-13R18 |
Standard Specification for Rubber Contraceptives - Vaginal Diaphragms |
| 09/17/2018 |
ObGyn/
Gastroenterology/
Urology |
9-120 |
Complete |
ASTM |
D3492-16 |
Standard Specification for Rubber Contraceptives (Male Condoms) |
| 08/21/2017 |
Orthopedic |
11-242 |
Complete |
ASTM |
F1839-08 (Reapproved 2016) |
Standard Specification for Rigid Polyurethane Foam for Use as a Standard Material for Testing Orthopaedic Devices and Instruments |
| 01/27/2015 |
Orthopedic |
11-281 |
Complete |
ASTM |
F1672-14 (Reapproved 2019) |
Standard Specification for Resurfacing Patellar Prosthesis |
| 01/14/2019 |
General Plastic Surgery/
General Hospital |
6-338 |
Complete |
ASTM |
D7866-14 |
Standard Specification for Radiation Attenuating Protective Gloves |
| 12/18/2023 |
General Plastic Surgery/
General Hospital |
6-497 |
Partial |
ASTM |
D7866-23 |
Standard Specification for Radiation Attenuating Protective Gloves |
| 03/18/2009 |
General Plastic Surgery/
General Hospital |
6-215 |
Complete |
ASTM |
F2132-01 (Reapproved 2008)e1 |
Standard Specification for Puncture Resistance of Materials Used in Containers for Discarded Medical Needles and Other Sharps |
| 12/23/2016 |
Materials |
8-440 |
Complete |
ASTM |
F3091/F3091M-14 |
Standard Specification for Powder Bed Fusion of Plastic Materials |
| 07/15/2019 |
Materials |
8-509 |
Complete |
ASTM |
F702-18 |
Standard Specification for Polysulfone Resin for Medical Applications |
| 01/30/2014 |
Materials |
8-358 |
Complete |
ASTM |
F1855-00 (Reapproved 2019) |
Standard Specification for Polyoxymethylene (Acetal) for Medical Applications |
| 12/20/2021 |
Materials |
8-574 |
Complete |
ASTM |
F2820-12(2021)e1 |
Standard Specification for Polyetherketoneketone (PEKK) Polymers for Surgical Implant Applications |
| 12/18/2023 |
Materials |
8-609 |
Complete |
ASTM |
F2026-23 |
Standard Specification for Polyetheretherketone (PEEK) Polymers for Surgical Implant Applications |
| 09/17/2018 |
Materials |
8-475 |
Complete |
ASTM |
F2026-17 |
Standard Specification for Polyetheretherketone (PEEK) Polymers for Surgical Implant Applications |
| 05/30/2022 |
Materials |
8-592 |
Complete |
ASTM |
F3384-21 |
Standard Specification for Polydioxanone Polymer Resins for Surgical Implants |
| 07/06/2020 |
General Plastic Surgery/
General Hospital |
6-442 |
Partial |
ASTM |
D6977-19(2023) |
Standard Specification for Polychloroprene Examination Gloves for Medical Application |
| 07/15/2019 |
Materials |
8-510 |
Complete |
ASTM |
F997-18 |
Standard Specification for Polycarbonate Resin for Medical Applications |
| 07/06/2020 |
General Plastic Surgery/
General Hospital |
6-445 |
Partial |
ASTM |
D5250-19(2023) |
Standard Specification for Poly(vinyl chloride) Gloves for Medical Application |
| 12/23/2019 |
Materials |
8-521 |
Complete |
ASTM |
F2313-18 |
Standard Specification for Poly(glycolide) and Poly(glycolide-co-lactide) Resins for Surgical Implants with Mole Fractions Greater Than or Equal to 70 % Glycolide |
| 08/21/2017 |
General Plastic Surgery/
General Hospital |
6-70 |
Complete |
ASTM |
E825-98 (Reapproved 2016) |
Standard Specification for Phase Change-Type Disposable Fever Thermometer for Intermittent Determination of Human Temperature |
| 05/29/2023 |
General Plastic Surgery/
General Hospital |
6-492 |
Complete |
ASTM |
F2100-23 |
Standard Specification for Performance of Materials Used in Medical Face Masks |
| 12/23/2019 |
General Plastic Surgery/
General Hospital |
6-425 |
Complete |
ASTM |
F2100-19 |
Standard Specification for Performance of Materials Used in Medical Face Masks |
| 07/06/2020 |
General Plastic Surgery/
General Hospital |
6-446 |
Partial |
ASTM |
D6319-19(2023) |
Standard Specification for Nitrile Examination Gloves for Medical Application |
| 12/21/2020 |
Neurology |
17-17 |
Complete |
ASTM |
F3395/F3395M-19 |
Standard Specification for Neurosurgical Head Holder Devices |
| 09/17/2018 |
Orthopedic |
11-329 |
Complete |
ASTM |
F2180-17 |
Standard Specification for Metallic Implantable Strands and Cables |
| 05/30/2022 |
Materials |
8-586 |
Complete |
ASTM |
F2989-21 |
Standard Specification for Metal Injection Molded Unalloyed Titanium Components for Surgical Implant Applications |
| 09/17/2018 |
Materials |
8-473 |
Partial |
ASTM |
F2885-17 |
Standard Specification for Metal Injection Molded Titanium-6Aluminum-4Vanadium Components for Surgical Implant Applications |
| 09/17/2018 |
Materials |
8-474 |
Complete |
ASTM |
F2886-17 |
Standard Specification for Metal Injection Molded Cobalt-28Chromium-6Molybdenum Components for Surgical Implant Applications |
| 09/17/2018 |
General Plastic Surgery/
General Hospital |
6-123 |
Complete |
ASTM |
E667-98 (Reapproved 2017) |
Standard Specification for Mercury-in-Glass, Maximum Self-Registering Clinical Thermometers |
| 12/20/2021 |
Materials |
8-578 |
Complete |
ASTM |
F2848-21 |
Standard Specification for Medical-Grade Ultra-High Molecular Weight Polyethylene Yarns |
| 08/21/2017 |
Orthopedic |
11-309 |
Complete |
ASTM |
F116-12 (Reapproved 2016) |
Standard Specification for Medical Screwdriver Bits |
| 09/08/2009 |
Software/
Informatics |
13-29 |
Complete |
CLSI |
LIS01-A2 |
Standard Specification for Low-Level Protocol to Transfer Messages Between Clinical Laboratory Instruments and Computer Systems |
| 06/07/2021 |
Orthopedic |
11-377 |
Complete |
ASTM |
F2083-21 |
Standard Specification for Knee Replacement Prosthesis |
| 05/29/2023 |
General Plastic Surgery/
General Hospital |
6-494 |
Complete |
ASTM |
F3352/F3352M-23a |
Standard Specification for Isolation Gowns Intended for Use in Healthcare Facilities |
| 12/20/2021 |
General Plastic Surgery/
General Hospital |
6-474 |
Partial |
ASTM |
F3352-19 |
Standard Specification for Isolation Gowns Intended for Use in Healthcare Facilities |
| 09/17/2018 |
Orthopedic |
11-310 |
Complete |
ASTM |
F1611-00 (Reapproved 2018) |
Standard Specification for Intramedullary Reamers |
| 08/21/2017 |
General Plastic Surgery/
General Hospital |
6-125 |
Complete |
ASTM |
E1965-98 (Reapproved 2016) |
Standard Specification for Infrared Thermometers for Intermittent Determination of Patient Temperature |
| 04/04/2016 |
General Plastic Surgery/
General Hospital |
6-355 |
Complete |
ASTM |
D3772-15(2021) |
Standard Specification for Industrial Rubber Finger Cots |
| 08/14/2015 |
General Plastic Surgery/
General Hospital |
6-353 |
Complete |
ASTM |
F2051-00 (Reapproved 2014) |
Standard Specification for Implantable Saline Filled Breast Prosthesis |
| 01/14/2019 |
Materials |
8-179 |
Partial |
ASTM |
F754-08 (Reapproved 2015) |
Standard Specification for Implantable Polytetrafluoroethylene (PTFE) Sheet, Tube, and Rod Shapes Fabricated from Granular Molding Powders |
| 09/17/2018 |
General Plastic Surgery/
General Hospital |
6-409 |
Complete |
ASTM |
F703-18 |
Standard Specification for Implantable Breast Prostheses |
| 08/21/2017 |
Materials |
8-333 |
Complete |
ASTM |
F2393-12 (Reapproved 2020) |
Standard Specification for High-Purity Dense Magnesia Partially Stabilized Zirconia (Mg-PSZ) for Surgical Implant Applications |
| 08/21/2017 |
Materials |
8-226 |
Complete |
ASTM |
F603-12 (Reapproved 2020) |
Standard Specification for High-Purity Dense Aluminum Oxide for Medical Application |
| 06/27/2016 |
Materials |
8-429 |
Complete |
ASTM |
F2224-09 (Reapproved 2020) |
Standard Specification for High Purity Calcium Sulfate Hemihydrate or Dihydrate for Surgical Implants |
| 09/17/2018 |
Orthopedic |
11-324 |
Complete |
ASTM |
F366-17 |
Standard Specification for Fixation Pins and Wires |
| 04/04/2016 |
Orthopedic |
11-299 |
Complete |
ASTM |
F2068-15 |
Standard Specification for Femoral Prostheses - Metallic Implants |
| 03/16/2012 |
General Plastic Surgery/
General Hospital |
6-177 |
Complete |
ASTM |
E1112-00(2018) |
Standard Specification for Electronic Thermometer for Intermittent Determination of Patient Temperature |
| 12/20/2021 |
Orthopedic |
11-387 |
Complete |
ASTM |
F1781-21 |
Standard Specification for Elastomeric Flexible Hinge Finger Total Joint Implants |
| 08/14/2015 |
General Plastic Surgery/
General Hospital |
6-200 |
Complete |
ASTM |
E1061-01(2022) |
Standard Specification for Direct-Reading Liquid Crystal Forehead Thermometers |
| 06/27/2016 |
Materials |
8-427 |
Complete |
ASTM |
F1185-03 (Reapproved 2014) |
Standard Specification for Composition of Hydroxylapatite for Surgical Implants |
| 08/21/2017 |
Materials |
8-428 |
Complete |
ASTM |
F1581-08 (Reapproved 2020) |
Standard Specification for Composition of Anorganic Bone for Surgical Implants |
| 05/30/2022 |
Materials |
8-585 |
Complete |
ASTM |
F1377-21 |
Standard Specification for Cobalt-28Chromium-6Molybdenum Powder for Medical Devices (UNS R30075, UNS R31537, and UNS R31538) |
| 12/23/2019 |
Materials |
8-520 |
Complete |
ASTM |
F799-19 |
Standard Specification for Cobalt-28 Chromium-6 Molybdenum Alloy Forgings for Surgical Implants (UNS R31537, R31538, R31539) |
| 12/23/2019 |
Materials |
8-498 |
Complete |
ASTM |
F75-18 |
Standard Specification for Cobalt-28 Chromium-6 Molybdenum Alloy Castings and Casting Alloy for Surgical Implants (UNS R30075) |
| 08/21/2017 |
General Plastic Surgery/
General Hospital |
6-124 |
Complete |
ASTM |
E1104-98 (Reapproved 2016) |
Standard Specification for Clinical Thermometer Probe Covers and Sheaths |
| 06/07/2021 |
Materials |
8-558 |
Complete |
ASTM |
F3333-20 |
Standard Specification for Chopped Carbon Fiber Reinforced (CFR) Polyetheretherketone (PEEK) Polymers for Surgical Implant Applications |
| 01/27/2015 |
Materials |
8-171 |
Complete |
ASTM |
F1609-08 (Reapproved 2014) |
Standard Specification for Calcium Phosphate Coatings for Implantable Materials |
| 12/18/2023 |
Materials |
8-605 |
Complete |
ASTM |
F1609-23 |
Standard Specification for Calcium Phosphate Coatings for Implantable Materials |
| 01/30/2014 |
General Plastic Surgery/
General Hospital |
6-117 |
Complete |
ASTM |
F2172-02 (Reapproved 2011) |
Standard Specification for Blood/Intravenous Fluid/Irrigation Fluid Warmers |
| 12/23/2019 |
Materials |
8-491 |
Complete |
ASTM |
F1088-18 |
Standard Specification for Beta-Tricalcium Phosphate for Surgical Implantation |
| 12/19/2022 |
General Plastic Surgery/
General Hospital |
6-484 |
Complete |
ASTM |
F3502-22a |
Standard Specification for Barrier Face Coverings |
| 05/29/2023 |
Orthopedic |
11-399 |
Complete |
ASTM |
F1357-23 |
Standard Specification for Articulating Total Wrist Implants |
| 08/14/2015 |
Orthopedic |
11-294 |
Complete |
ASTM |
F1357-14 (Reapproved 2019) |
Standard Specification for Articulating Total Wrist Implants |
| 12/23/2019 |
Materials |
8-508 |
Complete |
ASTM |
F2579-18 |
Standard Specification for Amorphous Poly(lactide) and Poly(lactide-co-glycolide) Resins for Surgical Implants |
| 06/07/2018 |
General Plastic Surgery/
General Hospital |
6-407 |
Complete |
ASTM |
F3186-17 |
Standard Specification for Adult Portable Bed Rails and Related Products |
| 04/04/2016 |
Materials |
8-409 |
Partial |
ASTM |
F2924-14 |
Standard Specification for Additive Manufacturing Titanium-6 Aluminum-4 Vanadium with Powder Bed Fusion |
| 12/23/2016 |
Materials |
8-439 |
Partial |
ASTM |
F3001-14 |
Standard Specification for Additive Manufacturing Titanium-6 Aluminum-4 Vanadium ELI (Extra Low Interstitial) with Powder Bed Fusion |
| 06/27/2016 |
Materials |
8-426 |
Complete |
ASTM |
F3087-15 |
Standard Specification for Acrylic Molding Resins for Medical Implant Applications |
| 12/20/2021 |
Materials |
8-576 |
Complete |
ASTM |
F451-21 |
Standard Specification for Acrylic Bone Cement |
| 04/04/2016 |
Orthopedic |
11-301 |
Complete |
ASTM |
F2091-15 |
Standard Specification for Acetabular Prostheses |
| 12/21/2020 |
Materials |
8-544 |
Complete |
ASTM |
F961-20 |
Standard Specification for 35Cobalt-35Nickel-20Chromium-10Molybdenum Alloy Forgings for Surgical Implants (UNS R30035) |
| 09/17/2018 |
Orthopedic |
11-327 |
Complete |
ASTM |
F543-17 |
Standard Specification and Test Methods for Metallic Medical Bone Screws |
| 09/17/2018 |
Orthopedic |
11-325 |
Complete |
ASTM |
F564-17 |
Standard Specification and Test Methods for Metallic Bone Staples |
| 12/23/2016 |
Orthopedic |
11-316 |
Complete |
ASTM |
F1264-16 |
Standard Specification and Test Methods for Intramedullary Fixation Devices |
| 09/17/2018 |
Orthopedic |
11-322 |
Complete |
ASTM |
F1541-17 |
Standard Specification and Test Methods for External Skeletal Fixation Devices |
| 06/07/2021 |
Orthopedic |
11-378 |
Complete |
ASTM |
F2502-17 |
Standard Specification and Test Methods for Absorbable Plates and Screws for Internal Fixation Implants |
| 09/17/2018 |
Orthopedic |
11-333 |
Complete |
ASTM |
F382-17 |
Standard Specification and Test Method for Metallic Bone Plates |
| 08/21/2017 |
Materials |
8-458 |
Complete |
ASTM |
G5-14 |
Standard Reference Test Method for Making Potentiodynamic Anodic Polarization Measurements |
| 08/21/2017 |
Materials |
8-195 |
Complete |
ASTM |
F2024-10 (Reapproved 2016) |
Standard Practice for X-Ray Diffraction Determination of Phase Content of Plasma-Sprayed Hydroxyapatite Coatings |
| 07/26/2016 |
Biocompatibility |
2-213 |
Complete |
ASTM |
F1904-14 |
Standard Practice for Testing the Biological Responses to Particles In Vivo |
| 12/21/2020 |
Biocompatibility |
2-278 |
Complete |
ASTM |
F719-20 e1 |
Standard Practice for Testing Materials in Rabbits for Primary Skin Irritation |
| 09/17/2018 |
Biocompatibility |
2-256 |
Complete |
ASTM |
F720-17 |
Standard Practice for Testing Guinea Pigs for Contact Allergens: Guinea Pig Maximization Test |
| 01/14/2019 |
Biocompatibility |
2-141 |
Complete |
ASTM |
F1984-99 (Reapproved 2018) |
Standard Practice for Testing for Whole Complement Activation in Serum by Solid Materials |
| 07/15/2019 |
Biocompatibility |
2-263 |
Complete |
ASTM |
F1903-18 |
Standard Practice for Testing for Cellular Responses to Particles in vitro |
| 12/20/2021 |
Materials |
8-567 |
Complete |
ASTM |
F86-21 |
Standard Practice for Surface Preparation and Marking of Metallic Surgical Implants |
| 12/21/2020 |
Biocompatibility |
2-280 |
Complete |
ASTM |
F1408-20a |
Standard Practice for Subcutaneous Screening Test for Implant Materials |
| 12/23/2016 |
Biocompatibility |
2-93 |
Complete |
ASTM |
F763-04 (Reapproved 2016) |
Standard Practice for Short-Term Screening of Implant Materials |
| 12/19/2022 |
Biocompatibility |
2-297 |
Complete |
ASTM |
F763-22 |
Standard Practice for Short-Term Intramuscular Screening of Implantable Medical Device Materials |
| 12/23/2016 |
Biocompatibility |
2-244 |
Partial |
ASTM |
F748-16 |
Standard Practice for Selecting Generic Biological Test Methods for Materials and Devices |
| 07/15/2019 |
Materials |
8-504 |
Complete |
ASTM |
F561-19 |
Standard Practice for Retrieval and Analysis of Medical Devices, and Associated Tissues and Fluids |
| 09/09/2008 |
Software/
Informatics |
13-21 |
Complete |
CLSI |
LIS06-A |
Standard Practice for Reporting Reliability of Clinical Laboratory Information Systems |
| 06/27/2016 |
Materials |
8-431 |
Complete |
ASTM |
F2971-13 |
Standard Practice for Reporting Data for Test Specimens Prepared by Additive Manufacturing |
| 09/17/2018 |
Materials |
8-472 |
Complete |
ASTM |
F2847-17 |
Standard Practice for Reporting and Assessment of Residues on Single-Use Implants and Single-Use Sterile Instruments |
| 12/21/2020 |
Materials |
8-547 |
Complete |
ASTM |
F629-20 |
Standard Practice for Radiography of Cast Metallic Surgical Implants |
| 07/15/2019 |
Biocompatibility |
2-267 |
Complete |
ASTM |
F2888-19 |
Standard Practice for Platelet Leukocyte Count - An In-Vitro Measure for Hemocompatibility Assessment of Cardiovascular Materials. |
| 09/17/2018 |
Orthopedic |
11-197 |
Complete |
ASTM |
F983-86 (Reapproved 2018) |
Standard Practice for Permanent Marking of Orthopaedic Implant Components |
| 05/30/2022 |
Sterility |
14-576 |
Complete |
ASTM |
D4169-22 |
Standard Practice for Performance Testing of Shipping Containers and Systems |
| 12/23/2016 |
General I (QS/
RM) |
5-113 |
Complete |
ASTM |
D7386-16 |
Standard Practice for Performance Testing of Packages for Single Delivery Systems |
| 07/15/2019 |
Orthopedic |
11-350 |
Complete |
ASTM |
F2554-18 |
Standard Practice for Measurement of Positional Accuracy of Computer Assisted Surgical Systems |
| 05/29/2023 |
Materials |
8-602 |
Complete |
ASTM |
F2503-23 |
Standard Practice for Marking Medical Devices and Other Items for Safety in the Magnetic Resonance Environment |
| 07/06/2020 |
Materials |
8-528 |
Complete |
ASTM |
F2503-20 |
Standard Practice for Marking Medical Devices and Other Items for Safety in the Magnetic Resonance Environment |
| 07/06/2020 |
Orthopedic |
11-369 |
Complete |
ASTM |
F3292-19 |
Standard Practice for Inspection of Spinal Implants Undergoing Testing |
| 08/21/2017 |
Biocompatibility |
2-155 |
Complete |
ASTM |
F2147-01 (Reapproved 2016) |
Standard Practice for Guinea Pig: Split Adjuvant and Closed Patch Testing for Contact Allergens |
| 08/14/2015 |
Orthopedic |
11-183 |
Complete |
ASTM |
F1875-98 (Reapproved 2022) |
Standard Practice for Fretting Corrosion Testing of Modular Implant Interfaces: Hip Femoral Head-Bore and Cone Taper Interface |
| 12/18/2023 |
Materials |
8-610 |
Complete |
ASTM |
F601-23 |
Standard Practice for Fluorescent Penetrant Inspection of Metallic Surgical Implants |
| 01/14/2019 |
Materials |
8-483 |
Complete |
ASTM |
F601-18 |
Standard Practice for Fluorescent Penetrant Inspection of Metallic Surgical Implants |
| 12/21/2020 |
Orthopedic |
11-372 |
Complete |
ASTM |
F2996-20 |
Standard Practice for Finite Element Analysis (FEA) of Non-Modular Metallic Orthopaedic Hip Femoral Stems |
| 07/06/2020 |
Orthopedic |
11-368 |
Complete |
ASTM |
F3334-19 |
Standard Practice for Finite Element Analysis (FEA) of Metallic Orthopaedic Total Knee Tibial Components |
| 12/21/2020 |
Biocompatibility |
2-283 |
Complete |
ASTM |
F619-20 |
Standard Practice for Extraction of Materials Used in Medical Devices |
| 01/14/2019 |
Orthopedic |
11-344 |
Complete |
ASTM |
F2580-18 |
Standard Practice for Evaluation of Modular Connection of Proximally Fixed Femoral Hip Prosthesis |
| 07/15/2019 |
Biocompatibility |
2-264 |
Complete |
ASTM |
F2148-18 |
Standard Practice for Evaluation of Delayed Contact Hypersensitivity Using the Murine Local Lymph Node Assay (LLNA). |
| 01/30/2014 |
Sterility |
14-404 |
Complete |
ASTM |
F2250-13 (Reapproved 2018) |
Standard Practice for Evaluation of Chemical Resistance of Printed Inks and Coatings on Flexible Packaging Materials |
| 12/20/2021 |
Orthopedic |
11-391 |
Complete |
ASTM |
F2722-21 |
Standard Practice for Evaluating Mobile Bearing Knee Tibial Baseplate Rotational Stops |
| 07/06/2020 |
Biocompatibility |
2-274 |
Complete |
ASTM |
F749-20 |
Standard Practice for Evaluating Material Extracts by Intracutaneous Injection in the Rabbit |
| 01/30/2014 |
Sterility |
14-405 |
Complete |
ASTM |
F2252/F2252M-13 (Reapproved 2018) |
Standard Practice for Evaluating Ink or Coating Adhesion to Flexible Packaging Materials Using Tape |
| 08/14/2015 |
Neurology |
17-4 |
Partial |
ASTM |
F647-94 (Reapproved 2014) |
Standard Practice for Evaluating and Specifying Implantable Shunt Assemblies for Neurosurgical Application |
| 12/21/2020 |
Biocompatibility |
2-279 |
Complete |
ASTM |
F750-20 |
Standard Practice for Evaluating Acute Systemic Toxicity of Material Extracts by Systemic Injection in the Mouse |
| 07/06/2020 |
Sterility |
14-542 |
Complete |
ISO ASTM |
52628 Second edition 2020-04 |
Standard practice for dosimetry in radiation processing |
| 12/21/2020 |
Biocompatibility |
2-277 |
Complete |
ASTM |
F813-20 |
Standard Practice for Direct Contact Cell Culture Evaluation of Materials for Medical Devices |
| 12/21/2020 |
Materials |
8-551 |
Complete |
ASTM |
F2895-20 |
Standard Practice for Digital Radiography of Cast Metallic Implants |
| 06/27/2016 |
Orthopedic |
11-307 |
Complete |
ASTM |
F2385-15 (Reapproved 2019) |
Standard Practice for Determining Femoral Head Penetration into Acetabular Components of Total Hip Replacement Using Clinical Radiographs |
| 06/07/2018 |
General Plastic Surgery/
General Hospital |
6-401 |
Complete |
ASTM |
D7160-16 |
Standard Practice for Determination of Expiration Dating for Medical Gloves |
| 01/27/2015 |
Dental/
ENT |
4-136 |
Complete |
ASTM |
F2504-05 (Reapproved 2022) |
Standard Practice for Describing System Output of Implantable Middle Ear Hearing Devices |
| 07/06/2020 |
Orthopedic |
11-365 |
Complete |
ASTM |
F1800-19 e1 |
Standard Practice for Cyclic Fatigue Testing of Metal Tibial Tray Components of Total Knee Joint Replacements |
| 12/20/2021 |
Materials |
8-563 |
Complete |
ASTM |
F1801-20 |
Standard Practice for Corrosion Fatigue Testing of Metallic Implant Materials |
| 12/19/2022 |
General I (QS/
RM) |
5-136 |
Complete |
ASTM |
D4332-22 |
Standard Practice for Conditioning Containers, Packages, or Packaging Components for Testing |
| 07/06/2020 |
Cardiovascular |
3-164 |
Complete |
ASTM |
F1830-19 |
Standard Practice for Collection and Preparation of Blood for Dynamic In Vitro Evaluation of Blood Pumps |
| 01/30/2014 |
Sterility |
14-401 |
Complete |
ASTM |
F2217/F2217M-13 (Reapproved 2018) |
Standard Practice for Coating/Adhesive Weight Determination |
| 09/17/2018 |
Sterility |
14-513 |
Complete |
ASTM |
F2825-18 |
Standard Practice for Climatic Stressing of Packaging Systems for Single Parcel Delivery |
| 08/21/2017 |
Biocompatibility |
2-246 |
Complete |
ASTM |
F1877-16 |
Standard Practice for Characterization of Particles |
| 09/17/2018 |
Orthopedic |
11-199 |
Complete |
ASTM |
F565-04 (Reapproved 2018) |
Standard Practice for Care and Handling of Orthopedic Implants and Instruments |
| 09/17/2018 |
Materials |
8-412 |
Complete |
ASTM |
F2537-06 (Reapproved 2017) |
Standard Practice for Calibration of Linear Displacement Sensor Systems Used to Measure Micromotion |
| 12/18/2023 |
Materials |
8-606 |
Complete |
ASTM |
F2537-23 |
Standard Practice for Calibration of Linear Displacement Sensor Systems Used to Measure Micromotion |
| 01/14/2019 |
Nanotechnology |
18-8 |
Complete |
ASTM |
E2578-07 (Reapproved 2022) |
Standard Practice for Calculation of Mean Sizes/Diameters and Standard Deviations of Particle Size Distributions |
| 05/29/2023 |
Biocompatibility |
2-301 |
Complete |
ASTM |
F1983-23 |
Standard Practice for Assessment of Selected Tissue Effects of Absorbable Biomaterials for Implant Applications |
| 08/06/2013 |
General Plastic Surgery/
General Hospital |
6-147 |
Complete |
ASTM |
D6978-05(2023) |
Standard Practice for Assessment of Resistance of Medical Gloves to Permeation by Chemotherapy Drugs |
| 12/18/2023 |
Biocompatibility |
2-302 |
Complete |
ASTM |
F981-23 |
Standard Practice for Assessment of Muscle and Bone Tissue Responses to Long-Term Implantable Materials Used in Medical Devices |
| 06/07/2018 |
Biocompatibility |
2-250 |
Complete |
ASTM |
F756-17 |
Standard Practice for Assessment of Hemolytic Properties of Materials |
| 07/06/2020 |
Cardiovascular |
3-165 |
Complete |
ASTM |
F1841-19 |
Standard Practice for Assessment of Hemolysis in Continuous Flow Blood Pumps |
| 12/23/2016 |
Biocompatibility |
2-94 |
Complete |
ASTM |
F981-04 (Reapproved 2016) |
Standard Practice for Assessment of Compatibility of Biomaterials for Surgical Implants with Respect to Effect of Materials on Muscle and Bone |
| 07/26/2016 |
Biocompatibility |
2-227 |
Complete |
ASTM |
F1983-14 |
Standard Practice for Assessment of Compatibility of Absorbable/Resorbable Biomaterials for Implant Applications |
| 05/29/2023 |
Materials |
8-597 |
Complete |
ASTM |
F2003-02(2022) |
Standard Practice for Accelerated Aging of Ultra-High Molecular Weight Polyethylene after Gamma Irradiation in Air |
| 04/04/2016 |
Materials |
8-200 |
Complete |
ASTM |
F2003-02 (Reapproved 2015) |
Standard Practice for Accelerated Aging of Ultra-High Molecular Weight Polyethylene after Gamma Irradiation in Air |
| 06/07/2021 |
ObGyn/
Gastroenterology/
Urology |
9-132 |
Complete |
ASTM |
F623-19 |
Standard Performance Specification for Foley Catheter |
| 01/30/2014 |
Anesthesiology |
1-97 |
Complete |
CGA |
V-7.1:2011 |
Standard Method of Determining Cylinder Valve Outlet Connections for Medical Gases |
| 01/14/2019 |
Cardiovascular |
3-158 |
Complete |
ASTM |
F3320-18 |
Standard Guide forCoating Characterization of Drug Coated Balloons |
| 12/20/2021 |
Nanotechnology |
18-20 |
Complete |
ASTM |
E3275-21 |
Standard Guide for Visualization and Identification of Nanomaterials in Biological and Nonbiological Matrices Using Darkfield Microscopy/Hyperspectral Imaging (DFM/HSI) Analysis |
| 12/23/2016 |
Materials |
8-442 |
Complete |
ASTM |
F3127-16 |
Standard Guide for Validating Cleaning Processes Used During the Manufacture of Medical Devices |
| 12/23/2019 |
Materials |
8-524 |
Complete |
ASTM |
F3276-19 |
Standard Guide for Using a Force Tester to Evaluate the Performance of a Brush Part Designed to Clean the External Surface of a Medical Device |
| 12/23/2019 |
Materials |
8-523 |
Complete |
ASTM |
F3275-19 |
Standard Guide for Using a Force Tester to Evaluate Performance of a Brush Part Designed to Clean the Internal Channel of a Medical Device |
| 12/18/2023 |
Orthopedic |
11-406 |
Complete |
ASTM |
F3141-23 |
Standard Guide for Total Knee Replacement Loading Profiles |
| 09/17/2018 |
Orthopedic |
11-335 |
Complete |
ASTM |
F3141-17a |
Standard Guide for Total Knee Replacement Loading Profiles |
| 05/29/2023 |
Nanotechnology |
18-23 |
Complete |
ASTM |
E3025-22 |
Standard Guide for Tiered Approach to Detection and Characterization of Silver Nanomaterials in Textiles |
| 07/06/2020 |
Nanotechnology |
18-15 |
Complete |
ASTM |
E3025-16 |
Standard Guide for Tiered Approach to Detection and Characterization of Silver Nanomaterials in Textiles |
| 12/20/2021 |
Cardiovascular |
3-177 |
Complete |
ASTM |
F2606-08 (Reapproved 2021) |
Standard Guide for Three-Point Bending of Balloon-Expandable Vascular Stents and Stent Systems |
| 01/14/2019 |
Cardiovascular |
3-138 |
Complete |
ASTM |
F2942-13 |
Standard Guide for the In Vitro Axial, Bending, and Rotational Durability Test of Vascular Stents |
| 05/29/2023 |
Biocompatibility |
2-299 |
Complete |
ASTM |
F1904-23 |
Standard Guide for Testing the Biological Responses to Medical Device Particulate Debris and Degradation Products in vivo |
| 05/30/2022 |
Cardiovascular |
3-182 |
Complete |
ASTM |
F3036-21 |
Standard Guide for Testing Absorbable Stents |
| 01/14/2019 |
Nanotechnology |
18-5 |
Complete |
ASTM |
E2859-11 (Reapproved 2017) |
Standard Guide for Size Measurement of Nanoparticles Using Atomic Force Microscopy |
| 12/23/2019 |
Materials |
8-502 |
Complete |
ASTM |
F2038-18 |
Standard Guide for Silicone Elastomers, Gels, and Foams Used in Medical Applications Part I - Formulations and Uncured Materials |
| 07/15/2019 |
Materials |
8-503 |
Complete |
ASTM |
F2042-18 |
Standard Guide for Silicone Elastomers, Gels, and Foams Used in Medical Applications - Part II - Crosslinking and Fabrication |
| 09/09/2008 |
Software/
Informatics |
13-18 |
Complete |
CLSI |
LIS03-A |
Standard Guide for Selection of a Clinical Laboratory Information Management System |
| 07/15/2019 |
Biocompatibility |
2-265 |
Complete |
ASTM |
F2901-19 |
Standard Guide for Selecting Tests to Evaluate Potential Neurotoxicity of Medical Devices |
| 12/21/2020 |
Materials |
8-549 |
Complete |
ASTM |
F3208-20 |
Standard Guide for Selecting Test Soils for Validation of Cleaning Methods for Reusable Medical Devices |
| 12/20/2021 |
Cardiovascular |
3-178 |
Complete |
ASTM |
F3067-14 (Reapproved 2021) |
Standard Guide for Radial Loading of Balloon-Expandable and Self-Expanding Vascular Stents |
| 07/06/2020 |
Tissue Engineering |
15-63 |
Complete |
ASTM |
F2739-19 |
Standard Guide for Quantifying Cell Viability and Related Attributes within Biomaterial Scaffolds |
| 01/27/2015 |
Orthopedic |
11-283 |
Complete |
ASTM |
F2943-14 (Reapproved 2019) |
Standard Guide for Presentation of End User Labeling Information for Orthopedic Implants Used in Joint Arthroplasty |
| 04/04/2016 |
Tissue Engineering |
15-24 |
Complete |
ASTM |
F2721-09 (Reapproved 2014) |
Standard Guide for Pre-clinical in vivo Evaluation in Critical Size Segmental Bone Defects |
| 01/14/2019 |
Biocompatibility |
2-136 |
Complete |
ASTM |
E1262-88 (Reapproved 2018) |
Standard Guide for Performance of the Chinese Hamster Ovary Cell/Hypoxanthine Guanine Phosphoribosyl Transferase Gene Mutation Assay |
| 01/14/2019 |
Biocompatibility |
2-145 |
Complete |
ASTM |
F1439-03 (Reapproved 2018) |
Standard Guide for Performance of Lifetime Bioassay for the Tumorigenic Potential of Implant Materials |
| 09/17/2018 |
Tissue Engineering |
15-55 |
Complete |
ASTM |
F3259-17 |
Standard Guide for Micro-computed Tomography of Tissue Engineered Scaffolds |
| 07/06/2020 |
Materials |
8-531 |
Complete |
ASTM |
F3321-19 |
Standard Guide for Methods of Extraction of Test Soils for the Validation of Cleaning Methods for Reusable Medical Devices |
| 12/20/2021 |
Materials |
8-575 |
Complete |
ASTM |
F3160-21 |
Standard Guide for Metallurgical Characterization of Absorbable Metallic Materials for Medical Implants |
| 04/04/2016 |
Orthopedic |
11-247 |
Complete |
ASTM |
F2789-10 (Reapproved 2020) |
Standard Guide for Mechanical and Functional Characterization of Nucleus Devices |
| 01/14/2019 |
Cardiovascular |
3-86 |
Partial |
ASTM |
F2394-07 (Reapproved 2017) |
Standard Guide for Measuring Securement of Balloon Expandable Vascular Stent Mounted on Delivery System |
| 04/04/2016 |
Nanotechnology |
18-1 |
Complete |
ASTM |
E2490-09 (Reapproved 2021) |
Standard Guide for Measurement of Particle Size Distribution of Nanomaterials in Suspension by Photon Correlation Spectroscopy (PCS) |
| 01/14/2019 |
Nanotechnology |
18-7 |
Complete |
ASTM |
E2834-12 (Reapproved 2022) |
Standard Guide for Measurement of Particle Size Distribution of Nanomaterials in Suspension by Nanoparticle Tracking Analysis (NTA) |
| 01/14/2019 |
Nanotechnology |
18-6 |
Complete |
ASTM |
E2865-12 (Reapproved 2022) |
Standard Guide for Measurement of Electrophoretic Mobility and Zeta Potential of Nanosized Biological Materials |
| 08/06/2013 |
Tissue Engineering |
15-14 |
Complete |
ASTM |
F2603-06 (Reapproved 2020) |
Standard Guide for Interpreting Images of Polymeric Tissue Scaffolds |
| 06/07/2018 |
Tissue Engineering |
15-54 |
Complete |
ASTM |
F3207-17 |
Standard Guide for in vivo Evaluation of Rabbit Lumbar Intertransverse Process Spinal Fusion Model |
| 04/04/2016 |
Tissue Engineering |
15-44 |
Partial |
ASTM |
F2529-13 |
Standard Guide for in vivo Evaluation of Osteoinductive Potential for Materials Containing Demineralized Bone (DBM) |
| 06/07/2021 |
Materials |
8-557 |
Complete |
ASTM |
F3268-18a |
Standard Guide for in vitro Degradation Testing of Absorbable Metals |
| 12/18/2023 |
Cardiovascular |
3-189 |
Complete |
ASTM |
F2942-19 |
Standard Guide for in vitro Axial, Bending, and Torsional Durability Testing of Vascular Stents |
| 07/15/2019 |
Orthopedic |
11-354 |
Complete |
ASTM |
F3295-18 |
Standard Guide for Impingement Testing of Total Disc Prostheses |
| 07/15/2019 |
Tissue Engineering |
15-57 |
Complete |
ASTM |
F2315-18 |
Standard Guide for Immobilization or Encapsulation of Living Cells or Tissue in Alginate Gels |
| 08/20/2012 |
Cardiovascular |
3-104 |
Complete |
ASTM |
F2914-12 (Reapproved 2018) |
Standard Guide for Identification of Shelf-life Test Attributes for Endovascular Devices |
| 04/04/2016 |
Orthopedic |
11-303 |
Complete |
ASTM |
F3047M-15 |
Standard Guide for High Demand Hip Simulator Wear Testing of Hard-on-hard Articulations |
| 12/18/2023 |
Orthopedic |
11-403 |
Complete |
ASTM |
F3047M-23 |
Standard Guide for High Demand Hip Simulator Wear Testing of Hard-on-Hard Articulations |
| 01/14/2019 |
Nanotechnology |
18-2 |
Partial |
ASTM |
E2535-07 (Reapproved 2018) |
Standard Guide for Handling Unbound Engineered Nanoscale Particles in Occupational Settings |
| 01/14/2019 |
Orthopedic |
11-272 |
Complete |
ASTM |
F1714-96 (Reapproved 2018) |
Standard Guide for Gravimetric Wear Assessment of Prosthetic Hip Designs in Simulator Devices |
| 08/21/2017 |
Orthopedic |
11-269 |
Complete |
ASTM |
F2423-11 (Reapproved 2020) |
Standard Guide for Functional, Kinematic, and Wear Assessment of Total Disc Prostheses |
| 09/09/2008 |
Software/
Informatics |
13-23 |
Complete |
CLSI |
LIS08-A |
Standard Guide for Functional Requirements of Clinical Laboratory Information Management Systems |
| 12/20/2021 |
Cardiovascular |
3-171 |
Complete |
ASTM |
F2514-21 |
Standard Guide for Finite Element Analysis (FEA) of Metallic Vascular Stents Subjected to Uniform Radial Loading |
| 09/17/2018 |
Cardiovascular |
3-154 |
Complete |
ASTM |
F3211-17 |
Standard Guide for Fatigue-to-Fracture (FtF) Methodology for Cardiovascular Medical Devices |
| 12/20/2021 |
Materials |
8-572 |
Complete |
ASTM |
F2565-21 |
Standard Guide for Extensively Irradiation-Crosslinked Ultra-High Molecular Weight Polyethylene Fabricated Forms for Surgical Implant Applications |
| 07/09/2014 |
Orthopedic |
11-276 |
Complete |
ASTM |
F1798-13 |
Standard Guide for Evaluating the Static and Fatigue Properties of Interconnection Mechanisms and Subassemblies Used in Spinal Arthrodesis Implants |
![Sort by Date [Old to new]](/scripts/cdrh/images/arrow_up-black.GIF){kind=icon}
![Sort by Date [New to old]](/scripts/cdrh/images/arrow_down-black.GIF){kind=icon}
